auto door locks - hondaowners.honda.com/utility/download?path=/static/pdfs/2015/pilot/... · auto...

1
DRIVING POSITION MEMORY SYSTEM (DPMS) Store driver’s seat and side mirror positions into memory for each corresponding keyless remote transmitter (1 or 2). Programming the DPMS Note: Once set, stored positions can be recalled by pressing one of the memory buttons (1 or 2) on the door. 1. Turn the ignition switch to ON (II). Shift into Park (P). 2. Adjust the seat and outside mirrors to your preferred positions. 3. Press SET. You will hear a beep. 4. Press the memory button corresponding to the remote (1 or 2) you are using within 5 seconds. You will hear two beeps. AUTO DOOR LOCKS Default Lock/Unlock Setting Default Lock Setting All doors and the tailgate are preset to lock when your vehicle reaches about 10 mph. Programmable Auto Door Lock/Unlock Settings Below are the options you can choose. See Auto Door Locking/Unlocking in your Owner’s Manual for instructions on programming these settings. Default Unlock Setting Only the driver’s door is preset to unlock when you shift into Park (P). AUTO DOOR UNLOCK Auto Unlock (all doors) When you turn the ignition OFF When you shift into Park Auto Unlock (only driver’s door) When you turn the ignition OFF When you shift into Park Turn off Auto Unlock Operate manually AUTO DOOR LOCK Auto Lock When you reach 10 mph When you shift out of Park Turn off Auto Lock Operate manually Program how and when the vehicle doors and the tailgate automatically lock and unlock. Programming the Auto Door Unlock Setting Press either Info (/) button on the steering wheel to toggle to the Customize Settings display on the MID, then press SEL/RESET to enter the menu. 1. Select CHANGE SETTING. 2. Select DOOR/WINDOW SETUP. 3. Select AUTO DOOR UNLOCK. 4. Select SHIFT TO P. 5. Select ALL DOORS. 6. Select EXIT to save the setting and exit the menu.

Upload: lenguyet

Post on 25-May-2018

221 views

Category:

Documents


2 download

TRANSCRIPT

Page 1: AUTO DOOR LOCKS - Hondaowners.honda.com/utility/download?path=/static/pdfs/2015/Pilot/... · AUTO DOOR LOCKS Default Lock/Unlock Setting Default Lock Setting All doors and the tailgate

DRIVING POSITION MEMORY SYSTEM (DPMS)

Store driver’s seat and side mirror positions into memory for each correspondingkeyless remote transmitter (1 or 2).

Programming the DPMS

Note: Once set, stored positions can be recalled by pressing one of the memorybuttons (1 or 2) on the door.

1. Turn the ignition switch to ON (II).Shift into Park (P).

2. Adjust the seat and outside mirrorsto your preferred positions.

3. Press SET. You will hear a beep.

4. Press the memory buttoncorresponding to the remote(1 or 2) you are using within 5seconds. You will hear two beeps.

AUTO DOOR LOCKS

Default Lock/Unlock Setting

Default Lock Setting

All doors and the tailgate arepreset to lock when your vehiclereaches about 10 mph.

Programmable Auto Door Lock/Unlock Settings

Below are the options you can choose. See Auto Door Locking/Unlocking in yourOwner’s Manual for instructions on programming these settings.

Default Unlock Setting

Only the driver’s door is preset tounlock when you shift into Park (P).

AUTO DOOR UNLOCK

Auto Unlock(all doors)

When you turnthe ignition OFF

When you shiftinto Park

Auto Unlock(only driver’s

door)When you turnthe ignition OFF

When you shiftinto Park

Turn off Auto Unlock

Operate manually

AUTO DOOR LOCK

Auto Lock

When youreach 10 mph

When you shiftout of Park

Turn off Auto Lock

Operate manually

Program how and when the vehicle doors and the tailgate automatically lockand unlock.

g a g he u o oo

exit he menu

Programming the Auto Door Unlock Setting

Press either Info (�/�) button on the steering wheel to toggle to the CustomizeSettings display on the MID, then press SEL/RESET to enter the menu.

1. Select CHANGE SETTING.

2. Select DOOR/WINDOW SETUP.

3. Select AUTO DOOR UNLOCK.

4 . Select SHIFT TO P.

5 . Select ALL DOORS.

6. Select EXIT to save the setting andexit the menu.