australia’s coking coal exports to...
TRANSCRIPT
Australia’s coking coal exports to JapanPrice–quality relationships under
benchmark and fair treatment pricingAnthony Swan, Sally Thorpe and Lindsay Hogan*
Australian Bureau of Agricultural and Resource Economics
42nd Annual Conference of the Australian Agricultural and Resource Economics Society
University of New England, Armidale, 19–21 January 1998
ABARE CONFERENCE PAPER 98.3
1
ABARE
ABARE project 1387
Given Japan’s dominant position in the regional coal market and the
continuing relatively low profitability of Australia’s coal industry, the
influence of the Japanese steel mills on coal pricing arrangements between
Australia and Japan remains a policy issue in Australia. The Japanese steel
mills introduced the ‘fair treatment’ pricing system in Japanese fiscal year
(JFY) 1996, whereby coal contract information would be confidential but it
was argued that coal would be priced according to its value in use.
In this paper, Quandt’s switching regime model is used to test for structural
change in price–quality relationships in the important Australia–Japan coking
coal trade. There is statistical evidence that price–quality relationships
changed fundamentally after JFY 1994 for semisoft coking coals when the soft
coking coal category was merged with the semisoft coking coal category, and
in JFY 1996 for hard coking coals when the fair treatment pricing system was
introduced. It is concluded that coking coal price–quality relationships have
become substantially less transparent in recent years.
* The authors wish to thank Andrew Dickson of ABARE for useful comments.
IntroductionAustralia is the world’s largest coal exporter, accounting for around 29 per cent of world
coal exports in 1996, and Japan is the world’s largest coal importer, accounting for around
26 per cent of world coal exports (IEA 1997). In 1996-97, Australia’s coal exports were
valued at A$7.9 billion or 9 per cent of Australia’s total merchandise exports. Japan
remains Australia’s largest coal export market, accounting for 41 per cent and 53 per cent
of Australia’s metallurgical and thermal coal exports, respectively, in 1996-97.
Given the importance of coal in Australia’s merchandise exports, Japan’s dominant market
position and the continuing relatively low profitability of the Australian coal industry, the
efficiency of the Asia Pacific regional coal market remains a policy issue in Australia
(Hogan, Thorpe, Graham and Middleton 1997). In recent years, there have been two major
inquiries into the economic performance of Australia’s black coal industry. In the final
report of the 1994 inquiry, Taylor (1994) noted that it is difficult to assess whether the
collective buying practices of the Japanese steel mills and power utilities have resulted in
lower coal prices to this market. The recommendations in the Taylor report were directed
at increasing market transparency, increasing productivity and international competitive-
ness, and implementing an export diversification strategy (Taylor 1994). The recent inquiry
by the Industry Commission, which is to report in early 1998, has emphasised an inter-
national benchmarking approach to assess productivity and international competitiveness
issues more fully.
The focus in this paper is on the recommendations of the Taylor report relating to the need
to increase transparency in coal price determination, particularly with respect to the
influence of the Japanese steel mills on coal pricing arrangements between Australia and
Japan. From the mid-1980s, coking coal prices paid by Japanese steel mills, and broadly
followed by Asian steel mills more generally, were based on the Japanese benchmark
pricing system. Under this system, coking coals were grouped and priced by coal category,
where coal categories included hard, soft and semisoft coking coal. The absolute price of
a coal brand within a given coal category was negotiated relative to the benchmark coal
with known quality characteristics. After Japanese fiscal year (JFY) 1994, the soft coking
coal category was merged into the traditionally lower priced semisoft coking coal category.
In JFY1996, Japan replaced the benchmark pricing system for coking coals with the ‘fair
treatment’ pricing system whereby, it was argued, each coal brand would be valued
according to the quality requirements of specific Japanese steel mills. Under this
ABARE CONFERENCE PAPER 98.3
2
ABARE
arrangement, however, coal prices and other contract details would remain confidential.
The fair treatment system was introduced after substantial coking coal price increases in
the JFY1995 negotiations, following several years in which coking coal prices were
consistently reduced in real terms.
Issues of market inefficiency arise under both the benchmark and ‘fair treatment’ systems
because, first, coking coal categories are not uniquely defined in terms of coal quality
attributes but prices are nonoverlapping between categories and, second, the international
price negotiations are conducted sequentially by coal category and by coal importing
nation which effectively reduces the number of buyers in the market at any point in time
(Hogan, Thorpe, Graham and Middleton 1997). Confidentiality of price–quality–quantity
information under the fair treatment system is an issue since coal price discovery during
the annual negotiations, particularly for coal exporters, is made difficult. More generally,
the information content of price signals is critical for efficient resource allocation in
international coal trade.
The objective in this paper is to test for structural change in the price–quality relationships
implicit in the Australia–Japan coking coal trade between JFY1992 and JFY1997 using
Quandt’s exogenous switching regime regression technique, described in Goldfeld and
Quandt (1976) and Johnston (1991). Price–quality data are obtained from the Australian
Coal Report (various issues), including the data for JFY 1996 and 1997 which represent
estimates of actual settlements.
Recent hedonic regression analyses of hard coking coal price–quality relationships include
Chang (1995), Koerner (1996) and Hogan, Thorpe and Middleton (1997), although the
last paper also includes other coal categories. The consistency of coal price–quality
relationships by two or more major suppliers into Japan are examined in the first two
papers, and coal price–quality relationships in Australia’s exports to Japan and other
markets are examined in the third paper. Chang (1995) pools data for JFY 1993 and JFY
1994, Koerner (1996) undertakes separate regression analyses for JFY 1992 and JFY 1994,
while Hogan, Thorpe and Middleton (1997) pool data for the period JFY 1989 to JFY
1996. None of these studies explicitly test for structural changes in coal price–quality
relationships over time.
The next section contains a brief description of coal pricing arrangements and the quality
attributes of coking coals. Recent previous studies are described in the third section,
ABARE CONFERENCE PAPER 98.3
3
ABARE
followed by a description of the research method and data. Results are presented in the
following section and concluding comments are given in the final section.
Coal quality and pricing arrangements
Coal quality
Coal is not a homogeneous product, and is classified into broad groups — hard, soft and
semisoft coking and thermal — according to the end use and the manner in which the coal
performs in that end use. The main quality characteristics of coking coal are total moisture
(TM), inherent moisture (IM), ash (ASH), volatile matter (VM), sulphur (SULP), crucible
swelling number (CSN), vitrinite reflectance (REFL), fluidity (usually specified as the
natural logarithm of fluidity, LFLUID) and coke strength after reaction (CSR). Coal quality
characteristics are described in appendix 1.
Coking coal is primarily used to produce the coke required in traditional iron and steel
making. While hard coking coal can replace other coal types in most end uses, the reverse
is not true. Hard coking coal has few contaminants and is a necessary input in the
production of strong coke. Typically, an Australian hard coking coal has a high crucible
swelling number, moderate volatile matter, and low inherent moisture, ash and sulphur
levels. Hard coking coal typically receives a price premium over other coals. The use of
coal in steelmaking is discussed further in Scott (1994).
Subject to technical limits, soft (when classified separately) and semisoft coking coals are
used in the blending mix for coke making to minimise costs, although there is some
weakening in the strength of the coke as a consequence. Soft coking coals have relatively
low ash levels and historically received a price premium over semisoft coking coals. PCI
(pulverised coal injection) coal is coal that is pulverised and injected into the base of the
blast furnace. PCI reduces the volume of coke required in the traditional steelmaking
process, although high quality coke must be produced (Thomson, Zulli, McCarthy and
Horrocks 1996). Japan is a leader in the development and adoption of iron and steelmaking
technologies that use lower quality coal types.
Semisoft coking coal is distinguished from thermal coal in having lower contaminants
such as ash. Some contaminants can be reduced by washing. Some semisoft coking coals
are also used as PCI coals, although the quality requirements of PCI coals are not well
known. Thermal coal is used mainly for combustion purposes in electricity generation,
ABARE CONFERENCE PAPER 98.3
4
ABARE
cement manufacture and general industry. Historically, consistent with relatively strong
substitution possibilities, the prices for thermal coal used in electricity generation and for
semisoft coking coal have tended to move together. Thermal coal used by general
industries and for cement manufacture has the lowest price. The impact of coal quality on
end use performance in power station applications is discussed in Skorupska (1993) and
Carpenter (1995).
Coal pricing arrangements
In the Asia Pacific regional market, coal price settlements between Australia and Japan
are most commonly the first to be negotiated each Japanese fiscal year and have tended to
signal overall market conditions in regional coal trade. Annual coking coal trade nego-
tiations over price and tonnage are usually settled sequentially with suppliers from each
exporting country and representatives of the joint purchasing cartel of Japanese steel mills.
Thermal coal settlements between the Japanese power utilities and exporting countries are
usually announced following the coking coal agreements.
Pricing arrangements for coking coal trade are more complex than for thermal coal used
in electricity generation. Historically, the benchmark prices for the hard, semisoft and soft
coking coal categories were used in the price negotiations for other coals in the correspond-
ing coal category. In principle, coal prices are determined broadly according to differences
in their relative contribution to the iron and steelmaking process. In practice, under the
benchmarking system, a ladder of relative coal prices was established that was relatively
rigid within each coal type and between coal types.
The Japanese steel mills abandoned the benchmark pricing system following the JFY 1995
negotiations when hard and semisoft coking coal prices increased by around US$5.65 and
US$6.27 a tonne respectively (Australian Coal Report 1995). They argued that the
changing quality specification requirements of the individual steel mills were not reflected
in the relative price structure of coking coal. The emerging adoption of pulverised coal
injection technology is one example where a new price formation process would need to
reflect the change in value in use of particular quality specifications. The rationale that the
Japanese steel mills provided for the introduction of the fair treatment system in JFY 1996
was that prices could be negotiated to better reflect the value in use for specific quality
specifications and hence improve the efficiency of price formation. However, given that
coal prices and other contract details remain confidential both during and after the price
ABARE CONFERENCE PAPER 98.3
5
ABARE
negotiations, it is unlikely that the efficiency of the market has been enhanced with the
introduction of the fair treatment system.
The electricity sector is the major end use market for thermal coal. All prices paid by the
Japanese power utilities, expressed fob in US dollars, are the same in terms of energy
content with a coal benchmark of 6700 kcal/kg on a gross air dried basis. In the future,
efforts to deregulate the electricity sector in Japan may result in the emergence of price
premiums and discounts for a range of end use attributes. In Hogan, Thorpe and Middleton
(1997), various quality related price premiums and discounts are estimated for thermal
coal used in general industry and cement manufacture. However, since published
price–quality data are not available, these categories are excluded from the current study.
Recent empirical studiesHedonic regression analysis is used widely to examine price–quality relationships for a
range of commodities. Berndt (1991) explains in detail several of the pioneering
applications including those of Waugh, Griliches and Chow, and further elaborates on
several key model misspecification issues. Rosen (1974) was one of the first to derive an
underlying hedonic pricing theory in conducting his econometric analysis.
In this section, only the most recent empirical analyses of coking coal price determination
for Japan are discussed since these are most relevant to the current study. These studies
include Chang (1995), Koerner (1996) and Hogan, Thorpe and Middleton (1997). Earlier
studies, discussed in some detail in Chang (1995), include Porter and Gooday (1990),
Koerner (1993) and Low, Dwyer, Jolly and Olejniczak (1993). Koerner (1996) updates the
results from the earlier econometric research contained in Koerner (1993).
Each study uses hedonic regression analysis to estimate price–quality relationships
relevant to the Asia Pacific coal trade and, either directly or indirectly, is concerned with
potential inefficiencies in regional coal market pricing. Both Chang and Koerner examine
the hypothesis that Japan pays different prices for essentially the same hard coking coal
from different regions of supply — Australia and Canada in Chang, and Australia, the
United States and Canada in Koerner. In constructing quality adjusted prices of all major
coal categories, Hogan, Thorpe and Middleton (1997) examine the hypothesis that
Australia receives different prices for essentially the same product into different regions
of demand.
ABARE CONFERENCE PAPER 98.3
6
ABARE
In all three cases there is some econometric evidence of inefficient pricing once coal prices
are adjusted for differences in coal qualities. Both Chang and Koerner found the non-
Australian country intercept dummy variables were positive and significantly different
from zero, indicating prices for both Canadian and US coals have been significantly higher
than prices for similar Australian coals. In Hogan, Thorpe and Middleton, non-Japan
regional intercept dummy variables were found to be significantly different from zero
although these varied across coal types and years, indicating that there have been signifi-
cant differences in the prices of Australia’s coal exports to Japan and other markets.
The estimation period varies in each of the studies — JFY 1993 to JFY 1994 in Chang,
JFY 1992 and JFY 1994 in Koerner, and JFY 1989 to JFY 1996 in Hogan, Thorpe and
Middleton. None of the studies formally test for structural change in the regression
coefficients for quality attributes between years. Notably though, Koerner estimates
separate regression equations for each year, while Chang and Hogan, Thorpe and
Middleton allow for changes in the intercept terms by year.
The datasets used by Chang and Koerner are mainly sourced from the Australian Coal
Report for Australia, while the sparser data for the United States and Canada were collected
from Japanese sources. The Tex Report’s annual Coal Manual, published in Tokyo, is the
main source of information on Japanese coking coal contracts. By contrast, Hogan, Thorpe
and Middleton used the Australian government’s coal export controls data which
represents the most comprehensive dataset available for hedonic regression analysis for
Australia’s coal exports.
Key results from the regression analyses in each of the three studies are presented in table
1. The results from Hogan, Thorpe and Middleton (1997) refer to a single pooled analysis
over hard, soft and semisoft coal types. Pure dummy variable parameters included in the
regression equations are not shown in the table for brevity. Only the quality attributes
included in the preferred model or models from each study are included in the table. Each
quality variable is standardised to common units so that each slope coefficient is the
estimated implicit price of a quality variable. These adjustments, which can be readily
derived, are required since Chang’s preferred equation is a linear–log specification.
A linear hedonic regression equation, such as that used in Hogan, Thorpe and Middleton
(1997), may be written in its simplest form as:
(1) Pj = a0 + Σi ai QCij
ABARE CONFERENCE PAPER 98.3
7
ABARE
where Pj is the coal price in coal shipment j; QCij is the value of quality characteristic i in
coal shipment j; a0 is an intercept term; and ai is the coefficient for quality characteristic
i. An implicit price of a coal attribute is the marginal change in the coal price given a
marginal change in the coal quality. From equation 1, the implicit price for quality
characteristic i is the coefficient for that variable, that is:
(2) ∂P/∂QCi = ai
The corresponding linear–log regression equation, such as that given in Chang, may be
written as:
(3) Pj = a0 + Si ai ln QCij
where ln is the natural logarithm. The implicit price for quality characteristic i is:
(4) ∂P/∂QCi = ai/QCi
which typically is evaluated at the mean of quality characteristic i to give a point estimate.
This is the approach used in table 1 to adjust the coefficients, with the exception of fluidity,
in Chang’s preferred model to obtain estimated implicit prices that can be compared across
ABARE CONFERENCE PAPER 98.3
8
ABARE
Table 1: Main results from previous studies
ChangMetallurgical coal Notation (1995) Koerner (1996) Hogan, Thorpe and Middleton (1997)
Coal type Hard Hard Hard Hard Soft SemisoftEstimation period a 1993–94 1992 1994 1989–96 1989–94 1989–96No. observations 34 38 38 1255 1255 1255Adjusted R squared b 0.89 0.95 0.93 0.96 0.96 0.96
Quality variables cTotal moisture TM Insignificant Insignificant InsignificantInherent moisture IM –US$2.25 –US$2.25 –US$0.97Ash ASH Insig- Insig- –US$0.46 –US$1.81 –US$0.17
nificant nificantVolatile matter VM –US$0.12 Insignificant Insignificant
Less than 30% US$0.1830% or higher VM–KINK –US$0.23
Sulphur SULP Insig- –US$6.89 Insig- Insignificant –US$3.64 Insignificantnificant nificant
Crucible swellingnumber CSN US$0.53 US$0.23 US$0.23 US$0.23
Vitrinite reflectance REFL US$6.58 US$6.02Log fluidity LFLUID US$0.36 US$0.57 US$0.41
a Based on Japanese fiscal years. b Unadjusted R squared for Koerner (1996). Only one adjusted R squared is generated for thepooled regression in Hogan, Thorpe and Middleton (1997). c Insignificant denotes a variable that is not significantly different fromzero at the 5% significance level.
studies. The coal price is measured in nominal US dollars a tonne in Chang (fob) and
Koerner (cif), and in JFY 1995 prices in Hogan, Thorpe and Middleton (fob).
The four quality variables included in Chang’s regression analysis are VM, SULP, CSN
and LFLUID. With the exception of SULP, all quality parameters are statistically
significant from zero at the 5 per cent level and have the correct sign. The four quality
variables included in Koerner’s JFY 1992 regression equation are ASH, SULP, REFL and
LFLUID. With the exception of ASH, all quality parameters are statistically significant at
the 5 per cent level and have the correct sign. A similar regression analysis is also
conducted for JFY 1994 and, except for an insignificant coefficient for sulphur, the results
are similar.
Notably, Koerner does not include CSN in the regression model arguing, among other
things, that it is an alternative physical measure to LFLUID of the coking characteristic of
a coking coal. Koerner also argues that LFLUID is related to VM, which may explain why
he does not also include that variable in the regression. Unlike Chang, Koerner also
includes REFL in the regression model arguing that this variable is a measure of the
available carbon in a coking coal.
Hogan, Thorpe and Middleton (1997) have information on six quality characteristics for
Australia’s coking coal shipments, including TM, IM, VM, ASH, SULP and CSN. They
impose a linear functional form on the coking coal regression equation arguing that the
high degree of correlation between each of the quality variables and squared and cross-
product terms rules out the use of more general functional forms in ordinary least squares
regression. Notably, Hogan, Thorpe and Middleton (1997) conduct RESET tests for
general model misspecification, particularly in functional form, and find no evidence of
this. RESET tests pick up curvature in the underlying model. Hogan, Thorpe and
Middleton (1997) also undertake several tests for departures from homoskedasticity and
find no evidence of this.
Hogan, Thorpe and Middleton (1997) find that IM, ASH and CSN are significant
explanators of hard, soft and semisoft coking coal prices. SULP is also an important
explanator of soft coking coal prices, and a kinked relationship for VM, whereby the
implicit price of semisoft coking coal is positive for coals with a VM less than 30 but is
negative thereafter, is an important explanator of semisoft coking coal prices. The negative
kink is introduced through variable VM-KINK, a dummy variable relationship for VM that
is defined in section 4. Intercept dummies for soft and semisoft coking coals are also found
ABARE CONFERENCE PAPER 98.3
9
ABARE
to be significant. This suggests that the categorisation of coal by type is a key explanator
of coking coal price differentials.
Hogan, Thorpe and Middleton (1997) provide some caveats to their research. Omitted
variables are not a problem if they contain no new information. However, Hogan, Thorpe
and Middleton note that their model may suffer from omitted variable bias because
variables considered important to the end use performance of coking coals are excluded
from the regression. The omitted variables are REFL, LFLUID and CSR. These variables
are not recorded in the export controls database. Notably, Chang omits REFL and both
Koerner and Chang omit CSR from the regression models.
The two key quality characteristics that the Japanese steel mills nominated under the fair
treatment system are CSR and fluidity (Kahraman, Coin and Reifenstein 1997). Based on
unpublished research, Kahraman, Coin and Reifenstein (1997) state that both factors have
been significant determinants of price for several years, even though there is no substantive
evidence for high fluidity levels to necessarily imply a high level of value in use. As Berndt
(1991) and Kahraman, Coin and Reifenstein (1997) note, however, hedonic regressions
are concerned with consumer perceptions of end use quality attributes rather than actual
performance attributes.
Research method
Hedonic regression equations and data
Separate hedonic regression equations are estimated for hard and semisoft coking coals.
In each case, the dependent variable is a measure of the real coal price. The set of
explanatory variables comprise coal quality characteristics and a set of annual dummy
variables. Following Hogan, Thorpe and Middleton (1997), a linear functional form based
on equation 1 is adopted to avoid multicollinearity problems associated with the inclusion
of quadratic or higher order polynomial terms.
The dataset used in this study comprises a cross-section of prices and quality characteristics
for hard and semisoft coking coal brands exported from Australia to Japan in the years JFY
1992 to JFY 1997. The data were obtained from the Australian Coal Report’s Coal year
(1992 and 1994–97). Coal prices are fob and quoted in US$ a tonne. Real prices are derived
by deflating the published nominal prices by the US consumer price index with a base year
of JFY 1995. Annual dummy variables (D1992, D1993, …, D1997) are included to cater
ABARE CONFERENCE PAPER 98.3
10
ABARE
for general changes in market conditions over time. Since coal prices are in JFY 1995 US
dollars, DJFY95 was excluded to avoid perfect multicollinearity.
The quality variables included in the regression equations, with notation and expected sign
shown in brackets, are excess moisture (EM, –), inherent moisture (IM, –), ash (ASH, –),
volatile matter (VM, nonlinear), sulphur (SULP, –), crucible swelling number (CSN, +),
vitrinite reflectance (REFL, +), log fluidity (LFLUID, +) and coke strength after reaction
(CSR, +). Excess moisture (EM) is equal to total moisture less inherent moisture. All other
quality characteristics are as defined in appendix 1. With the exception of log fluidity, the
regression coefficient on a quality variable is the implicit price for an extra unit of the
quality attribute within the coal category.
To avoid perfect multicollinearity, fixed carbon content is not included directly in the
regression equations since, to a first order approximation, it is equal to 100 per cent less
VM, ASH and IM. Following Hogan, Thorpe and Middleton (1997), two linear segments
for volatile matter with a maximum at 30 is hypothesised for the semisoft coking coal
equation. Both VM and VM-KINK are included in the regression model where VM-KINK
is a dummy variable defined by:
(5) VM-KINK = (VM – 30) if VM ≥ 30
= 0 elsewhere
The implicit price for VM is expected to be positive up to 30 and negative for higher levels
of VM.
Published information on coke strength after reaction is only available for hard coking
coal. This could indicate that for semisoft coking coal, marginal changes in CSR do not
have any influence on price. It is assumed in this paper that CSR does not have an impact
on semisoft coking coal prices and thus does not lead to biased regression results.
Although the prices of all coals were reported for 1994, associated quality specifications
were not. However, as quality specifications for these brands are largely constant between
years, 1994 quality specifications were equated to the average of the respective specifica-
tions in adjacent years.
The number of observations for the hard and semisoft coking coal categories totalled 103
and 82, respectively, between JFY 1992 and JFY 1997. Soft coking coal was not included
ABARE CONFERENCE PAPER 98.3
11
ABARE
ABARE CONFERENCE PAPER 98.3
12
ABARE
Table 3: Summary statistics for semisoft coking coal data
Mean Standard Minimum MaximumVariable Unit value deviation value value
Real coal price (in JFY 1995 US$)JFY 1992 US$/t 54.6 1.2 51.8 55.6
JFY 1992 US$/t 44.6 1.3 43.0 47.0
JFY 1993 US$/t 40.9 1.1 39.2 43.1
JFY 1994 US$/t 36.5 1.1 34.8 38.6
JFY 1995 US$/t 42.2 1.3 40.1 45.9
JFY 1996 US$/t 42.2 1.4 40.1 45.9
JFY 1997 US$/t 39.0 1.5 37.1 42.7
Quality variablesExcess moisture % 6.5 1.0 5.0 9.0
Inherent moisture % 2.3 0.7 1.0 3.5
Ash % 9.5 0.7 7.9 11.3
Volatile matter % 30.0 7.1 15.5 36.6
Sulphur % 0.6 0.2 0.3 1.3
Crucible swelling number no. 4.5 1.8 2.0 8.5
Vitrinite reflectance % 0.9 0.3 0.7 1.7
Log fluidity log ddpm 4.3 2.2 0.0 7.6
Table 2: Summary statistics for hard coking coal data
Mean Standard Minimum MaximumVariable Unit value deviation value value
Real coal price (in JFY 1995 US$)JFY 1992 US$/t 54.6 1.2 51.8 55.6
JFY 1993 US$/t 51.0 1.1 48.3 52.0
JFY 1994 US$/t 45.8 1.1 43.1 46.7
JFY 1995 US$/t 50.2 1.0 47.6 51.1
JFY 1996 US$/t 51.4 1.2 49.1 53.0
JFY 1997 US$/t 50.0 1.2 47.7 51.7
Quality variablesExcess moisture % 7.4 1.1 6.0 9.0
Inherent moisture % 1.4 0.4 1.0 2.0
Ash % 8.4 1.1 6.2 9.9
Volatile matter % 25.3 4.3 17.2 34.0
Sulphur % 0.6 0.1 0.4 0.9
Crucible swelling number no. 7.6 1.3 5.0 9.0
Vitrinite reflectance % 1.2 0.2 0.9 1.7
Log fluidity log ddpm 6.9 1.2 3.9 9.2
Coke strength after reaction % 61.8 7.7 50.0 74.0
in the analysis since only 15 observations were available for this category over the period
of analysis. Summary statistics of the quality and price variables used in this analysis are
listed in tables 2 and 3 for hard and semisoft coking coals, respectively.
Structural change tests
The key objective in this paper is to test for structural change or price–quality regime
switches over the period JFY 1992 to JFY 1997. A maximum likelihood estimation
technique, based on Quandt’s exogenous switching regime method, is used to test for
structural change (Goldfeld and Quandt 1976; Johnston 1991). With this method, the
coefficients for the quality characteristics may vary between hypothesised regimes and the
distributions of the error terms are assumed to be independent normal random variables
with zero mean and constant but different variances.
Given the hedonic regression equations described above, the maximum likelihood method
involves choosing the regime switch year, including the possibility of no switch, that
maximises the likelihood of observing the data sample as measured by the log likelihood
function. For completeness, tests are conducted for structural change at the beginning of
JFY 1994, 1995 and 1996. Log likelihood function estimates are derived using OLS
estimates of the relevant parameters for each of these hypothesised regime switches.
A statistically definitive likelihood ratio test of the null hypothesis of no structural change
or regime switch in the dataset is not available. However, Goldfeld and Quandt (1976)
report that the use of a Chi-square (3) distribution has been found to be an acceptable
approximation in some applications. The results for this approximate test are reported in
section 5.
A Chow test is commonly used to test the null hypothesis that the regression parameters
are jointly identical between regimes. However, the validity of this test rests on the
assumption that the error variances are common and constant for the regimes (Greene
1993). Greene (1993) describes a test which can be applied to Quandt’s switching regime
regression model of heteroscedasticity across regimes, with homoscedasticity within each
regime. Greene’s likelihood ratio statistic for a test of the null hypothesis of homoscedas-
ticity is identical to the likelihood ratio test for Quandt’s switching regime regression
model. In this case, the likelihood ratio test statistic is asymptotically distributed as a Chi-
square (1) distribution. The results from this test are also reported later.
ABARE CONFERENCE PAPER 98.3
13
ABARE
Other diagnostic testsFollowing Hogan, Thorpe and Middleton (1997), a set of Ramsey RESET tests are
conducted to test for general specification error, and a set of LM tests are also conducted
to test for the presence of nonconstant error variances.
RESET test statistics (2), (3) and (4) are derived from artificial regressions of the coal price
on the exogenous variables and an increasing number of polynomial terms in the fitted
value of the dependent variable (SHAZAM 1993). A test of the null hypothesis of no model
misspecification error is an F test that all of the coefficients on the fitted values of the
dependent variable in the artifical regression are jointly zero. Due to the power terms in
the regression, RESET tests tend to be very useful in detecting a misspecified functional
form.
The LM tests for departures from homoscedasticity are also based on artificial regressions.
Those considered here are based on regressing the estimated squared errors on the fitted
value of the dependent variable. In the LM (1), (2) and (3) tests, the fitted variable is
expressed in linear, quadratic or log quadratic form, respectively. In each case, the LM test
statistic, which has an asymptotic Chi-square (1) distribution, is computed as the number
of observations multiplied by the unadjusted R squared from the artificial regression.
Results
Structural change test results
The log likelihood function estimates for the assumptions of no structural change and
structural change at the beginning of JFY
1994, 1995 and 1996 are given in table 4.
From these results, it is likely that there
has been a structural shift in price–quality
relationships for both hard and semisoft
coking coal, although the timing of these
shifts differs. JFY 1996 is the most likely
switch point for the change in valuation
regime for hard coking coal, while JFY
1995 is estimated to be the most likely
switch point for the change in valuation
regime for semisoft coking coal.
ABARE CONFERENCE PAPER 98.3
14
ABARE
Table 4: Log likelihood function estimatesusing Quandt’s exogenous switching regimemethod for hard and semisoft coking coalequations a
Hard SemisoftSwitching point b coking coal coking coal
No switch –98.21 –83.71
JFY 1994 –95.78 –77.80
JFY 1995 –92.53 –69.96
JFY 1996 –83.51 –71.94
a Bold indicates the maximum log likelihood function estimate.b The hypothesised regime switching point or timing of thestructural change is at the beginning of the year indicated.
The likelihood ratio test statistic is 29.39 for the hard coking coal equation and 27.50 for
the semisoft coking coal equation. Based on the Chi-square (3) distribution, the null
hypothesis of no structural change is rejected at the 5 per cent significance level for both
hard and semisoft coking coal equations. Based on Greene’s test using the Chi-square (1)
distribution, the null hypothesis of homoscedasticity across regression groups is rejected
at the 5 per cent significance level for both hard and semisoft coking coal equations. Thus,
the application of Quandt’s switching regime model is appropriate in this study, rather than
Chow’s test for structural change.
Overall, these results indicate that the structure of price–quality relationships for the
Australia–Japan coking coal trade changed fundamentally for semisoft coking coal with
the merging of the soft coking coal category into the semisoft coking coal category after
JFY 1994 and for hard coking coal with the subsequent adoption of the fair treatment
system in JFY 1996.
Estimated regression equations
Following Chang (1995) and Koerner (1996), the full regression results are reported in
this section including variables not significantly different from zero at the 5 per cent level.
A major reason for this approach is that multicollinearity is a potential problem in this
type of study which, if present, lowers the t-values and increases the risk of excluding
significant variables. This may particularly be the case for the hard coking coal equation
in the second period. Omitted variables bias is considered to be a greater problem than the
inclusion of irrelevant variables. The full regression results are also strictly consistent with
the structural change tests and associated diagnostic tests reported above.
Hard coking coal equations
The regression results for the hard coking coal equations are given in table 5. Consistent
with the structural change test results, there are two sets of regression results corresponding
to the estimation periods JFY 1992 to 1995 and JFY 1996 to 1997. Notably, the adjusted
R squared is reduced from 0.97 in the first period to 0.74 in the second period. All RESET
and LM tests for both equations are accepted at the 5 per cent significant level.
For the first period, six quality characteristics are found to have a significant impact on
hard coking coal prices: excess moisture, inherent moisture, log fluidity, crucible swelling
number, coke strength after reaction and sulphur. Each coefficient for these quality
characteristics has the expected sign and all are significantly different from zero at the 5
ABARE CONFERENCE PAPER 98.3
15
ABARE
per cent level (the level used in the remainder of this section for two tail t tests unless
otherwise specified).
In the second period, the coefficients of only three quality characteristics — inherent
moisture, volatile matter and sulphur — are found to be significantly different from zero.
However, the t-values for crucible swelling number and coke strength after reaction are
significantly different from zero at the 10 per cent significance level (or, equivalently, at
the 5 per cent level using one tail t tests). In contrast to the results in the first period, excess
moisture and log fluidity are not significant determinants of hard coking coal prices in the
second period. Conversely, volatile matter is found to be a significant determinant of hard
coking coal prices in the second period, but not the first.
ABARE CONFERENCE PAPER 98.3
16
ABARE
Table 5: Regression results for hard coking coal equations
JFY 1992–95 JFY 1996–97
Estimated EstimatedVariable coefficient t-value coefficient t-value
EM –0.64 –4.73 * –0.39 –1.28IM –1.90 –3.79 * –4.30 –3.89 *ASH –0.11 –0.87 0.21 0.71VM –0.01 –0.11 0.48 4.27 *SULP –2.26 –3.60 * –2.43 –2.18 *CSN 0.56 4.63 * 0.41 1.73 **REFL 0.57 0.66 2.18 1.67LFLUID 0.73 3.91 * –0.22 –0.89CSR 0.06 2.63 * 0.07 1.82 **D1992 4.37 21.20 *D1993 0.73 3.60 *D1994 –4.43 –22.31 *D1997 –1.40 –5.70 *Constant 46.22 15.14 * 38.94 8.26 *
Number of observations 69 34Adjusted R squared 0.97 0.74
RESET testsRESET test 2 F(1,55) 0.43 F(1,22) 4.06RESET test 3 F(1,54) 0.21 F(1,21) 2.67RESET test 4 F(1,53) 0.38 F(1,20) 1.99
LM testsLM test 1 Chi square(1) 0.05 Chi square(1) 0.28LM test 2 Chi square(1) 0.05 Chi square(1) 0.29LM test 3 Chi square(1) 0.05 Chi square(1) 0.27
* Statistically significant at the 5 per cent significance level (2 tail test). ** Statistically significant at the 10 per cent significancelevel (2 tail test).
The interpretation of the estimated coefficients for the quality variables is summarised as
follows.
• For each one percentage point increase in excess moisture, the hard coking coal price
(in JFY 1995 US dollars) falls by an estimated US$0.64 a tonne in the first period. For
each one percentage point increase in inherent moisture, the hard coking coal price falls
by an estimated US$1.90 a tonne in the first period and US$4.30 a tonne in the second
period.
• For each one percentage point increase in coke strength after reaction, the hard coking
coal price is estimated to increase by US$0.06 a tonne in the first period and, at the 10
per cent significance level, US$0.07 a tonne in the second period.
• For each one unit increase in the crucible swelling number, the hard coking coal price
is estimated to increase by US$0.56 a tonne in the first period and, at the 10 per cent
significance level, US$0.41 a tonne in the second period.
• For each one unit increase in log fluidity, the hard coking coal price is estimated to
increase by US$0.73 a tonne in the first period.
• For each one percentage point increase in sulphur, the hard coking coal price is
estimated to fall by US$2.26 a tonne in the first period and US$2.43 a tonne in the
second period.
• For each one percentage point increase in volatile matter, the hard coking coal price is
estimated to increase by US$0.48 a tonne in the second period.
Overall, price–quality relationships for the Australia–Japan hard coking coal trade have
changed substantially since JFY 1992. Compared with the first estimation period JFY 1992
to 1995, in JFY 1996 and 1997, the extent to which differences in coal quality explain
differences in coal prices has been reduced markedly. The number of quality characteristics
that are found to be significant determinants of hard coking coal prices has also been
reduced, and the mix of quality characteristics has changed.
Compared with Chang (1995), Koerner (1996) and Hogan, Thorpe and Middleton (1997),
a larger number of quality characteristics are found to be significant determinants of hard
coking coal prices, particularly in the first estimation period which is the most comparable
time period. The quality characteristics included in the three previous econometric
exercises vary across the studies, but each represents a subset of the quality characteristics
used in the current study.
ABARE CONFERENCE PAPER 98.3
17
ABARE
The one exception to this is the use of total moisture rather than excess moisture in Hogan,
Thorpe and Middleton (1997), and total moisture was not included in their final equation.
Based on goodness of fit, excess moisture was preferred to total moisture in the current
study.
The estimated equations in the three previous studies may therefore have problems
associated with omitted variables bias. However, given the relatively high adjusted R
squared in these studies, particularly Koerner (0.95 and 0.93) and Hogan, Thorpe and
Middleton (0.96), there is a possibility that some properties of the coal are measured by
more than a single variable. For example, crucible swelling number, coke strength after
reaction and vitrinite reflectance are all indicators of coking properties of the coal. As a
consequence, exclusion of some quality characteristics may not be as serious as would
otherwise be the case.
Semisoft coking coal equations
Two sets of regression results for the semisoft coking coal equations are given in table 6
corresponding to the estimation periods JFY 1992 to 1994 and JFY 1995 to 1997. The
adjusted R squared is reduced from 0.97 in the first period to 0.84 in the second period.
All RESET and LM tests for both equations are accepted at the 5 per cent significant level.
For the first period, four quality characteristics are found to have a significant impact on
semisoft coking coal prices with the correct sign, including excess moisture, log fluidity,
crucible swelling number and sulphur. Coke strength after reaction was not included in
the semisoft coking coal equations since this information was not published for this coal
category.
In the second period, the coefficients of three quality characteristics — excess moisture,
volatile matter (for coal with a volatile level higher than 30) and crucible swelling number
— are found to be significantly different from zero. Log fluidity and sulphur are not
significant determinants of semisoft coking coal prices in the second period. Similar to
the hard coking coal equations, volatile matter is found to be a significant determinant of
prices of semisoft coking coal (with high volatile matter levels) in the second period, but
not the first.
The interpretation of the estimated coefficients for the quality variables is summarised as
follows.
ABARE CONFERENCE PAPER 98.3
18
ABARE
• For each one percentage point increase in excess moisture, the semisoft coking coal
price (in JFY 1995 US dollars) falls by an estimated US$0.61 a tonne in the first period
and US$0.92 a tonne in the second period.
• For each one unit increase in the crucible swelling number, the semisoft coking coal
price is estimated to increase by US$0.27 a tonne in the first period and US$0.57 a
tonne in the second period.
• For each one unit increase in log fluidity, the semisoft coking coal price is estimated to
increase by US$0.35 a tonne in the first period.
• For each one percentage point increase in sulphur, the semisoft coking coal price is
estimated to fall by US$1.31 a tonne in the first period.
• For each one percentage point increase in volatile matter above 30, the semisoft coking
coal price is estimated to fall by US$0.40 a tonne in the second period.
ABARE CONFERENCE PAPER 98.3
19
ABARE
Table 6: Regression results for semisoft coking coal equations
JFY 1992–95 JFY 1996–97
Estimated EstimatedVariable coefficient t–value coefficient t–value
EM –0.61 –3.34 * –0.92 –2.63 *IM 0.48 1.64 0.14 0.32ASH –0.33 –1.39 0.26 0.74VM –0.10 –1.43 0.05 0.51VM_KINK 0.01 0.08 –0.40 –2.11 *SULP –1.31 –2.34 * –0.68 –0.48CSN 0.27 3.93 * 0.57 4.68 *REFL –0.53 –0.91 –0.73 –1.13LFLUID 0.35 3.25 * 0.09 0.48D1992 8.16 34.46 *D1993 4.47 19.10 *D1996 –0.27 –0.86D1997 –3.43 –10.55 *Constant 44.02 15.32 * 43.39 11.68 *
Number of observations 43 39Adjusted R squared 0.97 0.84RESET tests
RESET test 2 F(1,30) 0.03 F(1,26) 1.44RESET test 3 F(1,29) 0.35 F(1,25) 1.01RESET test 4 F(1,28) 0.77 F(1,24) 0.68
LM testsLM test 1 Chi square(1) 1.31 Chi square(1) 0.66LM test 2 Chi square(1) 1.31 Chi square(1) 0.69LM test 3 Chi square(1) 1.30 Chi square(1) 0.62
* Statistically significant at the 5 per cent significance level (2 tail test).
The structural changes in the price–quality relationships for the Australia–Japan semisoft
coking coal trade since JFY 1992 appear to be substantial, but less so than for hard coking
coal trade. Compared with the first estimation period JFY 1992 to 1994, in the second
period JFY 1995 to 1997, the explanatory power of coal quality in explaining differences
in coal prices has been reduced markedly, but by less than occurred for the hard coking
coal equations. Similar to the hard coking coal equations, the number of quality charac-
teristics that are found to be significant determinants of semisoft coking coal prices has
been reduced, and the mix of quality characteristics has changed.
ConclusionIn this paper, Quandt’s exogenous switching regime method was used to test for structural
change in price–quality relationships for Australia’s hard and semisoft coking coal exports
to Japan in the period JFY 1992 to 1997. For semisoft coking coal, structural change is
estimated to have occurred at the beginning of JFY 1995, which follows the reclassification
of soft coking coal into the semisoft coking coal category. For hard coking coal, structural
change is estimated to have occurred a year later at the beginning of JFY 1996, which
coincides with the introduction of the fair treatment pricing system.
Throughout the full period, there are relatively more quality characteristics that are
significant determinants of hard coking coal prices than of semisoft coking coal prices. In
each case, however, the number of significant quality variables is lower in the recent period
and the mix of significant quality variables changes. Consistent with the findings of
Kahraman, Coin and Reifenstein (1997) that fluidity is a poor indicator of the coking
properties of coal, log fluidity is not a significant determinant of either hard or semisoft
coking coal prices in the recent period.
Notably, the explanatory power of the equations, as measured by the adjusted R squared,
is reduced substantially between the two periods from 0.97 to 0.74 for hard coking coal
and from 0.97 to 0.84 for semisoft coking coal. Under the fair treatment pricing system,
in operation in both JFY 1996 and 1997, final hard and semisoft coking coal prices and
other contract information remain confidential. The substantial reduction in the
explanatory power of quality characteristics may be consistent with increased difficulties,
particularly for coal exporters, in obtaining information about coal price–quality outcomes
during the annual negotiations. However, this conclusion is dependent on the assumption
that coal price-quality data published since the beginning of JFY 1996 are reliable
estimates of actual coal settlements.
ABARE CONFERENCE PAPER 98.3
20
ABARE
Appendix 1: Coal qualityCoal quality characteristics refer to either the composition of the coal or properties of the
coal that directly influence its ability to perform the function required in the end use of
the coal. Using proximate analysis, coal is comprised of fixed carbon, volatile matter, ash
and inherent moisture. Fixed carbon and coal volatile matter can be further divided into
the elements carbon, hydrogen, nitrogen, sulphur and oxygen using ultimate analysis.
Vitrinite reflectance (R0max or Rvmax) is an accurate measure of coal rank and is also
used to evaluate coking coal blends. Coke quality increases with coal rank. Older, higher
rank coals tend to have a lower inherent moisture content due to their longer exposure to
heat and geological pressure. Similarly, volatile matter tends to decrease as the rank of a
coal increases. By contrast, the fixed carbon content and calorific value of coal tends to
rise with the rank of the coal.
The crucible swelling number indicates the capacity of the coal to expand when subjected
to a standardised heat and is used to evaluate the coking properties of the coal. Coking
coal is determined primarily by its coking properties. The crucible swelling number ranges
from 0 to 9 and tends to be positively related to coke quality. That is, a crucible swelling
number of 9 implies the coal has very good coking properties.
The fixed carbon content of the coal influences the specific energy content or calorific
value of the coal. The calorific value is the amount of heat released by the complete
combustion of the coal under specified conditions and is usually measured in kilocalories
per kilogram (kcal/kg). The fixed carbon content is measured as a percentage of the air
dried coal sample.
Volatile matter is the proportion of the air dried sample that is released in the form of gas
or vapour during a standardised heating test. Volatile matter is a positive influence on the
ability of the coal to sustain combustion, but is inversely related to coke yield (Roberts
and Callcott 1984). A high volatile matter content — generally exceeding 30 per cent of
the air dried coal — increases the potential risk of spontaneous combustion.
The total moisture content refers to the water in coal, and is the sum of inherent (or air
dried) moisture and excess moisture. Excess moisture can be removed by coal preparation.
Transport costs increase directly with moisture content. Extremely low total moisture
increases the risk of spontaneous combustion.
ABARE CONFERENCE PAPER 98.3
21
ABARE
Ash is the residue remaining after the complete combustion of all coal organic matter and
oxidation of the mineral matter present in the coal. Ash is therefore the incombustible
material present in the coal and is measured as a percentage of the air dried coal sample.
A higher ash content results in both higher transport and handling costs per unit of energy
contained in the coal and waste that, in general, requires disposal. For coking coals, ash
remains in the coke and becomes incorporated in blast furnace slag. Coal contracts
typically contain penalties for ash outside the specified range.
Sulphur increases operating and maintenance costs by causing fouling and corrosion of
metal surfaces. Coal contracts typically contain penalties for sulphur outside the specified
range.
Fluidity of coking coals increases up to a point of maximum fluidity when subjected to
increasing temperature. Some coking coal users pay a premium for increased fluidity
despite the fact that there is little evidence of a positive correlation with the quality of the
coke produced (Kahraman, Coin and Reifenstein 1997).
Coke strength after reaction is strongly positively related to coke quality. For the purpose
of blast furnace applications, the coal used must be able to form large angular coke that
retains its form despite constant abrasion and collision in the blast furnace.
ABARE CONFERENCE PAPER 98.3
22
ABARE
ReferencesAustralian Coal Report 1992, Coal 1992, Sydney.
—— 1994, Coal 1994, Sydney.
—— 1995, Coal 1995, Sydney.
—— 1996, Coal 1996, Sydney.
—— 1997, Coal 1997, Sydney.
Berndt, E.R. 1991, The Practice of Econometrics: Classic and Contemporary, Addison-
Wesley, Massachusetts.
Carpenter, A.M. 1995, Coal Blending for Power Stations, IEA Coal Research, Inte-
rnational Energy Agency, London.
Chang, H.S. 1995, ‘Examining hard coking coal price differentials: a hedonic pricing
approach’, Resources Policy, vol. 21, no. 4, pp. 275–82.
Goldfeld, S.M. and Quandt, R. 1976, Studies in Nonlinear Estimation, Ballinger,
Massachusetts.
Greene, W.H. 1993, Econometric Analysis, Second Edition, Macmillan, New York.
Hogan, L., Thorpe, S. and Middleton S. 1997, Quality Adjusted Prices for Australia’s
Black Coal Exports, ABARE report to the Department of Primary Industries and Energy,
Canberra.
Hogan, L., Thorpe, S., Graham, P. and Middleton, S. 1997, ‘Coal price–quality relation-
ships and the outlook for coal’, in Outlook 97, Proceedings of the National Agricultural
and Resources Conference, Canberra, 4–6 February, vol. 3, Minerals and Energy,
ABARE, Canberra, pp. 249–68.
International Energy Agency (IEA) 1997, Coal Information 1996, IEA/OECD, Paris.
Johnston, J. 1991, Econometric methods, Third Edition, McGraw-Hill, Singapore.
Kahraman, H., Coin, C. and Reifenstein, A. 1997, ‘Technical factors determining com-
parative coking coal prices in the Japanese market’, in Outlook 97, Proceedings of the
National Agricultural and Resources Conference, Canberra, 4–6 February, vol. 3,
Minerals and Energy, ABARE, Canberra, pp. 277–80.
ABARE CONFERENCE PAPER 98.3
23
ABARE
Koerner, R. 1993, ‘The behaviour of Pacific metallurgical coal markets: the impact of
Japan’s acquisition strategy on market price’, Resources Policy, vol. 19, no. 1, pp.
w 66–79.
—— 1996, Behaviour of Pacific energy markets: the case of the coking coal trade with
Japan, Pacific Economic Papers, no. 252, Australia–Japan Research Centre, Australian
National University, February.
Low, J., Dwyer, G., Jolly, L. and Olejniczak, J. 1993, Price formation for coking coal
exports to Japan: a hedonic approach, ABARE paper presented at the 22nd Conference
of Economists, Economic Society of Australia, Murdoch University and Curtin
University, Perth, 27 September to 1 October.
Porter, D. and Gooday, P. 1990, The effect of coal quality on Japanese coking coal contract
prices, ABARE paper presented at the 19th Conference of Economists, Economic
Society of Australia, University of New South Wales, Sydney, 24–27 September.
Roberts, O.C. and Callcott, T.G. 1984, Net Carbon in Coking Coal, Published Report
84–17, ACIRL, Sydney.
Rosen, S. 1974, ‘Hedonic prices and implicit markets: product differentiation in pure com-
petition’, Journal of Political Economy, vol. 82, no. 1, pp. 34–55.
Scott, D.H. 1994, Developments Affecting Metallurgical Uses of Coal, IEA Coal Research,
International Energy Agency, London.
SHAZAM 1993, User’s Reference Manual Version 7.0, McGraw-Hill, Canada.
Skorupska, N.M. 1993, Coal Specifications – Impact on Power Station Performance, IEA
Coal Research, International Energy Agency, London.
Taylor, R. 1994, Study of the Queensland and New South Wales Black Coal Industry: A
Report to the Australian Coal Industry Council, Canberra, November.
Thomson, A., Zulli, P., McCarthy, M. and Horrocks, K. 1996, ‘Pulverised coal injection
in ironmaking blast furnaces’, Australian Coal Review, October, pp. 42–6.
ABARE CONFERENCE PAPER 98.3
24
ABARE