aufg_2 process data communication with the mv4-touch panel worksheeta85_201 recipe handling: expand...
TRANSCRIPT
Aufg_2
Process data communicationwith the MV4-Touch Panel
Worksheet A85_201
Recipe handling:
Expand your project with a recipe entry.
First define the tags r_val1 ... r_val8.
Assign the tags to the new block RecipeBlk1.
The PLC start address for the tag r_Val1 is %MW0.0.0.4 .
Assign the “Control“ block to the PLC address %MW0.0.0.50.
Assign the “Status“ block to the PLC address %MW0.0.0.70.
Add a new mask to your project.
Edit the recipe button with the recipe object name “Recipes“.
Edit “5“ recipe entries.
Assign the recipe block „RecipeBlk1“(--> Tab „Recipe Blocks“)
Compile the project and test it in the MV4.
Note: The recipe data have to be downloaded with the project !!! (check box „Include Recipe Data „)
After the download to the PCMCIA Card open the file “Recipes.TAB“ with EXCEL® and edit the recipes as shown below.
Recipe-Handling
Back toStartmask
Recipes
Aufg_2
Process data communicationwith the MV4-Touch Panel
Worksheet A85_202
Recipe handling:
The different recipe entries should be changeable by a „Value Entry“.
Expand your mask as shown below.
Aufg_2
Process data communicationwith the MV4-Touch Panel
Worksheet A85_203
Password settings:
Expand your project with passwords.
Define two users. Each user has his own Password and his own Level.
e.g.: Username Level Password Access-Variable
Peter 0 P0 PWLevel0
Ralf 1 R1 PWLevel1
A mask change from mask1 to mask4 (Recipes) is only possible after a user loginof „Peter“ or „Ralf“.Changing of the recipes in mask4 is only possible in Level 0.
Define an automatic logout after 1 min.
Note:
The Password DATA has to be downloaded with theproject !!! (check-box „Include Password Data „)
Passwords are case sensitive !!
Aufg_2
Process data communicationwith the MV4-Touch Panel
Worksheet A85_204
Error - Warning - Message:
Add a new mask to your project (mask5).
Insert an error window in this mask and configure the error window as shown below.
Define 12 „error bits“ and assign them to 3 blocks with 4 errors, 4 warnings and 4 messages.
Define a short text for every error, warning and message.
Assign the block to the following PLC addresses :Error startbit %M0.0.0.30.0Warning startbit %M0.0.0.32.0Message startbit %M0.0.0.34.0
Also add function keys to this mask for : Confirm All, Show History, Clear History, Error Line Up, Error Line Down
Aufg_2
Process data communicationwith the MV4-Touch Panel
Worksheet A85_205
Help Window / Function-Key „ERROR HELP“:
Expand your project (mask5) with a Help-Window and a Function-Key „Error Help“.
The Help-Window should appear, if the Error Help - button is pressed.
Additionally edit a help hext for each error diplayed in the Help Window.The help text will be displayed after selecting the error message in the error window.
Display of the Error-Help-Texts
Aufg_2
Process data communicationwith the MV4-Touch Panel
Worksheet A85_206
Language Selection:
Add a new mask (mask6) to your project.
Define two function keys for the language selection between „English“ and yourmother tongue.
Define this second project language and edit it in the Galileo-Workshop.Translate the existing texts into your mother tongue.
Your mother tongue
Aufg_2
Process data communicationwith the MV4-Touch Panel
Worksheet A85_207
Function Keys:
Add to your mask „System Settings“:
Set Date and TimeDaylight Saving Time (DST) On/OffBrightness
Activate the screen saver after 1 min. for all masks.
DST ON/OFF