audio codes product catalog

8/2/2019 Audio Codes Product Catalog

1/37

2007 Product Catalog


2/37

Table of contents

SmartWORKS LD Series ............................. 3

SmartWORKS LD101 ..................................5

SmartWORKS NGX .....................................7

SmartWORKS DP ........................................9SmartWORKS DT ........................................11

SmartWORKS IPX-C ....................................13

RTS Box .......................................................... 15

TX100..............................................................17

IPM-260 .......................................................... 19

IPM-1610 ........................................................ 21

IPM-6310 Universal Conerence ..................... 23

IPM-6310 Media Processing ...........................25

Transcoding Resource Blade Series ................ 27

TP-260 ............................................................ 29

TP-1610 .......................................................... 31

TP-6310 .......................................................... 33

TP-12610 ........................................................ 35


3/37

AudioCodes Enabling Technology Products

4-24PortTelephonyCards

OnDemandVoltageDetection

ProgrammableVoltageThresholds

DetectsPolarityReversal

Minimum18kOhmImpedance

VastCODECSupport

Designed for analog networks, the SmartWORKS LD has bot

passive and terminate network interface capabilities. Featurin

programmable voltage thresholds and loop reversal detection, th

SmartWORKS LD is easily configured to accommodate variation

across analog networks. This product is offered in 4, 8, 6 and

port versions, suitable for small to large offices and call centers.

Tap Environment

The LD series accomodates low to high density environments wit

4, 8, 6, or 4 port blades. The Smar tWORKS API supports a tota

of 5 channels per system. The tapping point can be anywhere o

an analog line: between Central Office and PBX, Central Office anphones, or PBX and phones.

Terminate Environment

The LD series can be used to initiate as well as terminate calls

When configured as an interactive resource, phone lines can direct

connect to and terminate on the LD blades. Standard ring detectio

is available.

World-Wide Analog Support

The SmartWORKS LD supports passive call recording on groun

start and loop start analog networks. It has line terminatin

capabilities for loop start environments. Features such a

programmable voltage thresholds, voltage detection, and polarit

reversal are managed through the common SmartWORKS API. Aa result, the SmartWORKS LD easily adapts to variations found o

analog systems throughout the world.

Built in Perormance Monitoring

Built in voltage detection allows SmartWORKS LD to distinguis

a disruption of service if a cable is damaged or disconnected. Th

feature is unique in the industry and only available on the LD series.

Common SmartWORKS API eatures:

Media Control - CODECS

Tone Detection / Generation

CallerID/FSK/DTMF/MF Detection

Activity / Silence Detectors

Switching (H.00 and MVIP) Automatic Gain Control (AGC)

Automatic Volume Control (AVC)

Stereo Recording

Echo Cancellation

Call Progress Monitoring (CPM)

Full-duplex Channels

Media Streaming

Live Monitoring

Start/Stop Call Recording Triggers

Beep tone generation for passive mode

PSTN

SmartTAP LD Series

Live Monitor

Direct Line

Reception Console

Dispatcher Console

Recording Application

PBX

The SmartWORKS LD is perect or telephony recording anddialing applications in small to large ofces and call centers.

LD Application Model

SmartWORKS LD Series Next Generation Analog Passive/Active Telephony Card


4/37


Specifcations

RoHS compliant, lead ree technology

Lead and other materials banned in the RoHS directive are below ALL applicable substance levels as mandated by the EU

About AudioCodesAudioCodes Ltd. (NASDAQ: AUDC), Your Gat

VoIP, provides innovative, reliable and cost-e

Voice over Packet (VOP) technology and

Network products to OEMs, Network Eq

Providers, Service Providers and System Int

worldwide. AudioCodes provides a diverse

flexible, comprehensive media gateway and

processing technologies (based on VoIP

AudioCodes underlying, best-of-breed, cor

gateway architecture) and Session Border Co

(SBCs). The company is a market leader in

development, focused on VoIP Media Gatewa

Server and SBC technologies and network p

AudioCodes has deployed tens of millions o

gateway and media server channels globathe past few years and is a key originator of

G.73. standard for the emerging Voice

market. The Company is a VoIP technology

focused on quality, having recently received a

one ranking from ETSI for outstanding voice q

its media gateways and media servers. Aud

voice network products feature media gatew

media server platforms for packet-based app

in the converged, wireline, wireless, bro

access, enhanced voice services and video m

AudioCodes enabling technology products

VoIP and CTI communication blades, VoIP

gateway processors and modules, and CPE

AudioCodes headquarters and R&D facili

located in Israel with an R&D extension in Other AudioCodes offices are located in Eur

Far East, and Latin America.

International Headquarters

Hayarden Street, Airport City

Lod, Israel 705

Tel: +97-3-976-4000

Fax: +97-3-976-4040

US Headquarters

7 Worlds Fair Drive

Somerset, NJ 08873

Tel: -73-469-0880

Fax: -73-469-98

Contact us: www.audiocodes.com/infoWebsite: www.audiocodes.com/blades

007. AudioCodes Ltd. All rights reserved. AC, Ardito, Audi

AudioCodes logo, AudioCoded, IPmedia, Mediant, MediaPack

MLQ, NetCoder, Stretto, TrunkPack, VoicePacketizer and VoIP

are trademarks or registered trademarks of AudioCodes Ltd.

marks are the property of their respective owners. The inform

and specifcations in this document and the product(s) are s

change without notice.

Ref. # LTRM-003 V. /06

System Requirements

Hardware Requirements Pentium 4/equivalent GHz, PCI motherboard or passive backplane with 3.3V power supply, PCI . bus

Operating Systems Windows 000 Windows XP Windows 003 3 bit Linux (Call for variant details)

Technical Specications Max blades per system: 6 Max ports per system: Up to 5, Resource Sharing Bus

H.00 (409H, 809, 609, and 409 only)

Physical Characteristics Form Factor: Full or Half-size PCI card

Environmental Conditions Operating Temperature: 0C to +50C Storage Temperature: -0C to +85C Humidity: 8% to 80% non-

condensing Storage humidity: 8% to 80% non-condensing

Telephony Interfacing

Telephony Interface Signal/Noise ratio: 35dB referenced to -5dBm Idle channel noise: Less then 0dBrnc

Crosstalk coupling: Less then -70 dB (0dBm, 004Hz) Frequency response: 300Hz to 3400Hz +/-3dB

Ring detection: 30Vrms (min), 6 to 68Hz REN: < 0.5 Echo return loss: 8 dB +/- 3dB @400Hz

Telephony Interface (Passive Mode) Trunk Type: Loop Start/Ground Start Trunk Interface: High Impedance (Z) AC Impedance: 8 kOhms

Voltage Detection: Two software programmable thresholds Range: -6V to + 6V, Accuracy +/- V

Telephony Interface (Terminate Mode) Trunk Type: Loop Start AC Impedance: Software Selectible (FCC, EU, China, Australia)

Loop Detection: Off Hook: 8mA (max) LD409, LD409H, LD809 On Hook: 6mA (min) LD409, LD409H, LD809

OFF Hook: mA (max) LD609, LD409 On Hook: 9mA (min) LD609, LD409

Telephony Connectors LD409, LD409H, LD809: RJ-4 LD609, LD409: RJ-x

Host Interface Bus Compatibility: Complies with PCISIG Bus Specications: Rev. 2.2 Bus Speed: 33 MHz

Bus Mode: 3 bit bus master/target

Analog Jack/Ports Audio Connector LD409: 4 ports, no H.00 LD409H: 4 ports LD809: 8 ports LD609: 6 ports

LD409: 4 ports

Audio Signal Receive range: -68 dBm to + 3 dBm Input gain control: +4 to -50 dB Silence Detection: API Programmable

Transmit volume control: +4 to -50 dB to H.00

Software

SDK AudioCodes Native SmartWORKS API

Tone Detection DTMF digits: 0 - 9, *, #, A, B, C, D MF Detection: R & R R digits: Per Q.5

Call Progress Monitoring (Terminate) Programmable tones: 20 Bandpass lters: 10 Filters per tone: 1, 2 or 3 Cycles: 0 to 255

SIT tones: Yes, programmable frequencies and duration Answering Machine Detect: YesVoice Processing Caller ID: V.3 & Bell 0 DTMF Detector: Primary & Secondary channel

Echo Cancellation (Terminate) Echo Cancellation (Terminate) Input Dynamic Range: G.65 compliant Double-talk detection: G.65 compliant

End path delay: 8ms

Tone Dialing (Terminate) DTMF digits: 0 9, *, #, A, B, C, D Frequency variation: Less then Hz

Safety and Certications (Pending) Telecom: DOC Emissions: FCC Part 15 class A EN 55022 Immunity: EN 55024 Safety: EN 60950

Estimated MTBF: 50,000 hours per Bellcore Method I

Audio Digitizing (Encoding & Decoding) G.73., G.73., G.79A, GSM 6.0, Microsoft GSM, G.76, G.76, OKI, G.76, -law or A-law per G.7

8 bit linear PCM (signed & unsigned), 6 Khz 6 bit linear PCM (signed), 6 bit linear PCM (signed & unsigned)

Wave le formats: Microsoft GSM, Linear signed, 8 & 16-bit PCM

Digitization selection: Programmable per channel, independent for encode and decode

Power Requirements

4 or 8 Channel + 3.3 VDC: .0 A, +5 VDC: n/a, - VDC: n/a, + VDC: 00 mA, Watts (Max): 4.5W

6 Channel + 3.3 VDC: .3 A, +5 VDC: n/a, - VDC: n/a, + VDC: 00 mA, Watts (Max): 6.7W

4 Channel + 3.3 VDC: .5 A, +5 VDC: n/a, - VDC: n/a, + VDC: 0 mA, Watts (Max): 7.6W

LD Series


5/37


SmartWORKS LD0 Next Generation Analog Passive/Active Telephony

Designed for analog networks, the SmartWORKS LD101 ha

passive and terminate network interface capabilities. Fe

programmable voltage thresholds and loop reversal detecti

SmartWORKS LD is easily configured to accommodate var

across analog networks. This product is offered in 4, 8, 6

port versions, suitable for small to large offices and call cent

Analog Station Port

The LD0s station port provides real-time direct access

blade for the purpose of storing and retrieving voice infor

from a local POTS telephone. The station port and trunk lin

maintain separate DSP resources allowing simultaneous play/control on both lines. The FXS (foreign exchange-station) fea

used to connect to local phone sets.

World-Wide Analog Support

The SmartWORKS LD 0 supports passive call re

on Ground Start and Loop Start analog networks. It ha

terminating capabilities for loop start environments. Feature

as programmable voltage thresholds, voltage detection, and p

reversal are managed through our common SmartWORKS

As a result, the SmartWORKS LD 0 easily adapts to var

found on analog systems throughout the world.


With built in voltage detection, service disruptions are detected if a cable is damaged or disconnected. This fea

currenlty not available on other SmartWORKS analog cards



Tone Detection / Generat ion



Automatic Gain Control (AGC)


Stereo Recording

Echo Cancellation



Media Streaming Live Monitoring


Beep tone generation for passive mode

PSTN

SmartTAP LD 101 Series

Live Monitor

Direct Line

Reception Console

Dispatcher Console


PBX

The SmartWORKS LD 101 is perect as an operatorinterace and or recording prompts.

LD101 Application Model

GlareProtection

OnDemandVoltageDetection

ProgrammableVoltageThresholds

DetectsPolarityReversal

VastCODECSupport


6/37




SpecifcationsSystem Requirements

Hardware Requirements Pentium 4 or equivalent GHz or better PCI motherboard or passive backplane with 3.3V power supply PCI . bus


Technical Specications Max boards per system: Any combination up to 512 ports Max ports per system: Up to 512

Boards Status: On-board LEDs Clocking: Master/Slave

Physical Characteristics Form Factor: Full or Half-size PCI card Operating Temperature: 0C to +60C Storage Temperature:-0C to

+85C Humidity: 8% to 80% non-condensing Storage humidity: 8% to 80% non-condensing

Telephony Interfacing

Telephony Interface Signal/Noise ratio: 35dB referenced to -5dBm Idle channel noise: Less then 0dBrnc

Crosstalk coupling: Less then -70 dB (0dBm, 004Hz) Frequency response: 300Hz to 3400Hz +/-3dB

Ring detection: 30Vrms (min), 6 to 68Hz Ringer Equivalence Number: < 0.5

Echo return loss: 8 dB +/- 3dB @400Hz External Connector: RJ-4

Telephony Interface (Passive Mode) Trunk Type: Loop Start/Ground Start Trunk Interface: High Impedance (Z) AC Impedance: 8 kOhms

Voltage Detection:Two software programmable Thresholds Range: -6V to + 6V Accuracy: +/- V

Telephony Interface (Terminate Mode) Trunk Type: Loop Start AC Impedance: Software Selectible FCC, EU,China, Australia Loop Detection: Off Hook RJ-4: 8mA (max) On Hook RJ-4: 6mA (min)

Station Port Loop Current: 5 mA Tip / Ring Voltage: -4 Vdc @ on_hook Input Gain: 0 dB +/- 0.5 dB

Output Gain: -3 dB +/- 0.5 dB Loop Detection: off_hook 7mA(max) / on_hook 5 mA(min)

Noise tolerance: Per LSSGR sec. 6 Talk off: Bellcore TR-TSY-00076 Ring Voltage: NONE

(The LD0 does not provide FXS ring down feature )

Analog Jack Audio Connector: 3.5mm Male Stereo Plug Output impedance: 300Ohms Input impedance: 33KOhms

Mic bias: +5VDC @ 4.7KOhms Input gain: +9dB Output gain: 0 db @ 300Ohms

Full scale input: 370 mVRMS Full scale output: . mVRMS open circuit

Audio Signal Receive range: -68 dBm to + 3 dBm Input gain control: +4 to -50 dB Silence Detection: Programmable from

API Transmit volume control: +4 to -50 dB to H.00 Automatic Gain Control (AGC): Programmable from API

Automatic Volume Control (AVC): Programmable from API Activity Detection: Programmable from API

Frequency Response: 300 - 3400 Hz (+/- 3dB)

Host Interface Bus Compatibility: Complies with PCISIG Bus Specications, Rev. 2.2 Bus Speed: 33 MHz


Software

SDK AudioCodes Native SmartWORKS API SmartControl (Control Panel) SmartVIEW (Card test application)

MF Detection R & R R digits: Per Q.5

DTMF Tone Detection DTMF digits: 0 - 9, *, #, A, B, C, D Dynamic range: -38 dBm to 0 dBm Minimum tone detection:

40 ms / programmable Interdigit timing: 40 ms min. Acceptable twist: Per LSSGR sec. 6, 8 dB forward,

4 dB reverse Frequency variation: Accept all +/- 1.5%, reject all +/-2.5% Noise tolerance: Per LSSGR sec. 6

Talk off: Bellcore TR-TSY-00076

Audio Digitizing 5.3 Kb/s: G.73. 6.3 Kb/s: G.73. 8 Kb/s: G.79A 3 Kb/s: GSM 6.0, Microsoft GSM

6 Kb/s: G.76 4 Kb/s: G.76, OKI 3 Kb/s: G.76, OKI 40 Kb/s: G.76

64 Kb/s: -law or A-law per G.7, 8 bit linear PCM (signed & unsigned)

96 Kb/s: 6 Khz 6 bit linear PCM(signed) 8 Kb/s: 6 bit linear PCM (signed & unsigned)

Voice Processing Caller ID: V.3 & Bell 0 DTMF Detector: Primary & Secondary channel

Echo Cancellation (Terminate) Input Dynamic Range: G.65 compliant Double-talk detection: G.65 compliant End path delay: 8ms

Tone Dialing(Terminate) Frequency variation: Less then Hz Rate: API Programmable Duration: API Programmable

Wave le formats Microsoft GSM, Linear signed, 8 & 16-bit PCM

Digitization selection Programmable per channel, independent for encode and decode

CPM (Terminate) Number of programmable tones: 0 Number of bandpass lters: 10 Number of lters per tone: 1,2 or 3Number of cycles: 0 to 55 SIT tones: Yes, programmable frequencies and duration

Answering Machine Detection Yes

Power Requirements

8 Channels: + 3.3 VDC: .0 A +5 VDC: n/a - VDC: n/a + VDC: 00 mA

Safety and Certications(Pending)

Telecom: DOC Emissions: FCC Part 5 class A EN 550 Immunity: EN 5504 Safety: EN 60950


SmartWORKS LD0

About AudioCodesAudioCodes Ltd. (NASDAQ: AUDC), Your GatVoIP, provides innovative, reliable and cost-e


Network products to OEMs, Network Equ


worldwide. AudioCodes provides a diverse r




gateway architecture) and Session Border Con


development, focused on VoIP Media Gateway



gateway and media server channels globa

the past few years and is a key originator of







media server platforms for packet-based appl






AudioCodes headquarters and R&D facilit

located in Israel with an R&D extension in t

Other AudioCodes offices are located in Eur




Lod, Israel 705

Tel: +97-3-976-4000

Fax: +97-3-976-4040

US Headquarters

7 Worlds Fair Drive

Somerset, NJ 08873

Tel: -73-469-0880

Fax: -73-469-98

Contact us: www.audiocodes.com/info

Website: www.audiocodes.com/blades

007. AudioCodes Ltd. All rights reserved. AC, Ardito, Audio







Ref. # LTRM-0030 V. /06


7/37


SmartWORKS NGX Single Card Solution to Passively Record Proprietary PBX Extensio

The SmartWORKS NGX is an all-in-one resource for

behind a PBX. Every key pressed, call taken, and telephone

performed by an agent is automatically decoded and sent

recording application. A powerful set of features, combined w

integration, makes the NGX a true single slot solution for call

application providers.

Tap Environment

The NGX is designed for tapping behind a proprietary PBX. R

between the PBX and agent phones, the Smar tWORKS NG

impedance receivers record both sides of a call without inte

service. The NGX is available in 8, 6, and 4 port configuThe SmartWORKS API supports a total of 5 channels per

As a result, the SmartWORKS NGX is ideal for low to high-

environments.

Extensive PBX Support

Designed with international deployment in mind, the Smar tW

NGX taps -wire, 4-wire, BRI and full duplex PBXs. The list

the NGX supports is constantly growing. Contact your Aud

sales representative for more information.


The SmartWORKS API provides framer alarms and network st

to pass easily into performance monitoring applications

driven framer alarms are generated with a loss of signal co

Network statistics are available for both sides of the conveincoming and outgoing. Statistics such as synchronization

line amplitude, noise or clipping are available via a sim

function call.



Tone Detection / Generat ion



Switching (H.00 and MVIP)



Stereo Recording

Echo Cancellation



Media Streaming

Live Monitoring


NGX Application Model

MultiplePBXSupport

FirmwareUpgradeabletoanyPBX

WideSpectrumoTriggerEvents

Summation

CODECSupport

PSTN

SmartTAP NGX Series

FinancialInstitutions

GovernmentAgencies 911/PSAP


PBX

Call Centers

Applied Use: The SmartWORKS NGX isperectly suited or inormation centers,fnancial trading centers or call centers wheretapping behind a proprietary PBX is required.


8/37

System Requirements

Hardware Requirements Pentium 4 or equivalent GHz or better PCI motherboard or passive backplane with 3.3V power supply PCI . bus

Operating Systems Windows 000 Windows XP Windows 003 3 bit Linux

Technical Specications Max boards per system: Any combination up to 512 ports Max ports per system: Up to 5 (6 Boards max)

Resource Sharing Bus: MVIP or H.00

Physical Characteristics Form Factor: Full-size PCI card Operating Temperature: 0C to +60C Boards Status: On-board LEDs Clocking: Master/Slave

Storage Temperature: -0C to +85C Humidity: 8% to 80% non-condensing Storage humidity: 8% to 80% non-condensing

Telephony and Interfacing

Tap Interface Insertion loss: 5dB

Mic bias: +5VDC @ 4.7KOhms Input gain: +9dB Output gain: .6dBm @ 300Ohms Full scale input: 370 mVRMS

Full scale output:.5 VRMS open circuit

PBX Interface PBX Support: Software Congurable (see www.AudioCodes.com for a complete list )

Audio Signal Receive range: -68 dBm to + 3 dBm Input gain control: +4 to -50 dB Silence Detection:Programmable from API

Transmit volume control +4 to -50 dB to MVIP/H.00 Automatic Gain Control (AGC):Programmable from API

Automatic Volume Control (AVC): Programmable from API

Software

SDK AudioCodes Native SmartWORKS API SmartControl (Control Panel) SmartVIEW (Card functionality test application)

Activity Detection Programmable from API Frequency Response: 300 - 3400 Hz (+/- 3dB)

Audio Digitizing 5.3 Kb/sG.73. 8 Kb/s:G.79A 3 Kb/s:GSM 6.0, Microsoft GSM 6 Kb/s:G.76

4 Kb/s:G.76, OKI 3 Kb/s:G.76, OKI 40 Kb/s:G.76 64 Kb/s:-law or A-law per G.7,

8 bit linear PCM (signed & unsigned) 96 Kb/s:6 Khz 6 bit linear PCM(signed)

8 Kb/s: 6 bit linear PCM (signed & unsigned) Wave le formats: Microsoft GSM, Linear signed 8 & 16-bit PCM


DTMF Tone Detection DTMF digits: 0 - 9, *, #, A, B, C, D Dynamic range: -38 dBm to 0 dBm Minimum tone detection: 40 ms /programmable

Interdigit timing: 40 ms min.Acceptable twist Per LSSGR sec. 6, 8 dB forward, 4 dB reverse Frequency variation: Accept all +/- 1.5%, reject all +/-2.5%

Noise tolerance: Per LSSGR sec. 6

Talk off Bellco re TR-TSY-00076

D Channel Events The following types of D-channel events are decoded:

PBX Event (Command Events) Generated by the PBX and passed to the phone as a command to perform some type of action.

Signaling These events indicate a call progress tone (dial tone, ring tones), or audio changes

LEDs These events correspond to light changes on the phone

Display These events indicate that the LCD on the phone has been updated. These are usually related to the clock display,

or messages displayed on the LCD.

Phone Events Generated by the phone indicating an action has been taken (i.e. button pressed).

Hook State Off hook and on hook changes occur when the handset is removed or replaced

Button events Indicate that a button on the phone was used. For example: digits pressed, speaker buttons etc.

Power Requirements

NGX (base) + 3.3 VDC: 0.9 A +5 VDC: .5 mA - VDC: 5 mA + VDC: 5 mA

NGX (4 channel) + 3.3 VDC: .6 A +5 VDC: .5 mA - VDC: 35 mA + VDC: 35 mA

Safety and Certications

Telecom: DOC Emissions: FCC Part 5 class A EN 550 Immunity: EN 5504 Safety: EN 60950


Specifcations



SmartWORKS NGX


































Lod, Israel 705

Tel: +97-3-976-4000

Fax: +97-3-976-4040

US Headquarters

7 Worlds Fair Drive

Somerset, NJ 08873

Tel: -73-469-0880

Fax: -73-469-98










Ref. # LTRM-003 V. /06


9/37


SmartWORKS DP T/E Passive Tap Card

The SmartWORKS DP sets the standard for passive tapping

T/E trunks in high-density environments. The SmartWORK

DP is a reliable tool used globally by many of the worlds larg

call logging application providers.

High Density Passive Tap Capabilities

Operating between a central office and PBX, the Smar tWORK

DPs high impedance receivers records both sides of a c

without interrupting service. Each blade can process up to

channels, with a maximum of 5 channels per host. Service

never interrupted even if the SmartWORKS DP-equipped

is shut down.

International Protocol Support

The SmartWORKS DP supports Channel Associated Signal

(CAS), Non-Facility Associated Signaling (NFAS) , DASS and a

Q.93 based ISDN variant. Trunk coding and framing is select

on a per framer basis. This allows a single blade to monitor t

trunks, each with different settings.


Network conditions and call statistics are easily accessed

the SmartWORKS API. Event driven alarms are reported

loss of signal conditions or synchronization errors. Framer a

call statistics are available through standard API function ca









Stereo Recording

Echo Cancellation



Media Streaming

Live Monitoring

Start/Stop Call Recording Triggers Beep tone generation for passive mode

SotwareSwitchableT1/E1Interace

ISDNCallStateMonitoring

TrueDualSpanCapabilities

On-boardDSPtoCompleteVoiceProcessing

CODECSupport

DPNSS,MFR2(RAW),ABCDSignaling

PSTN

T1/E1 Lines

Dual Passive Tap

SmartTAP DP Series

FinancialInstitutions

GovernmentAgencies 911/PSAP


PBX or Key System

Call Centers

Applied Use: With a proven feld record, the

SmartWORKS DP has been successully deployedin various international agencies such as banking, lawenorcement, trading and customer support centers.


10/37

System Requirements

Hardware Requirements Pentium 4 or equivalent GHz or better PCI motherboard or passive backplane with 3.3V power supply, PCI . bus

Operating Systems Windows 000 Windows XP Windows 003 3 bit Linux

Technical Specications Max boards per system: Any combination up to 512 ports Max ports per system: Up to 512 (16 Boards max)

Resource Sharing Bus: MVIP or H.00

Physical Characteristics Form Factor: Full-size PCI card Operating Temperature: 0C to +60C Boards Status: On-board LEDs Clocking: Master/Slave

Storage Temperature: -0C to +85C Humidity: 8% to 80% non-condensing Storage humidity: 8% to 80% non-condensing

Telephony Interface

Host Interface Bus Compatibility: Complies with PCISIG Bus Specications, Rev. 2.2 Bus Speed: 33 MHz


Trunk type T/E Trunk InterfaceDigital High Impedance (Z) AC Impedance k Ohms Input Impedance 000 Ohm +/- 5%

Maximum Tap Length 30m (00 feed) of CAT 3 cable Connectors Two RJ-45 connectors E: 6m

T Interface Receive Clock Rate: .544 MHz +/-00ppm Transmit Clock: Recovered RX clock or 50 ppm Input Level: LBO 0dB to -dB

Framing: SF (D4), ESF

Line Coding AMI, B8ZS Signaling Protocol ISDN, NFAS, CAS

Clock and Data Recovery: Complies with AT&T TR64 and Bellcore TA-TSY-00070

Loss of Signal Detection ANSI T.3 Alarm Detection and Integration LOS, LOF, Yellow, and AIS per ANSI T.3

Binary Sequence Detector Per ITU-T 0.5

E Interface Receive Clock Rate .048 +/- 75ppm Transmit Clock: Recovered RX clock or 50 ppm Input Level 3.V down to 0.45 V

Framing Basic G.704, CRC-4

Line Coding AMI, HDB3 Signaling Protocol: ISDN, DASS, CAS Loss of Signal Detectionper ITU-T G.775

Alarm Detection and Integration: LOS, LOSMF, TS6, CRC, DPNSS, MFRZ (Raw)


Audio Signal Receive range -68 dBm to + 3 dBm Input gain control: +4 to -50 dB Silence Detection: Programmable from API

Transmit volume control +4 to -50 dB to MVIP/H.00 Automatic Gain Control (AGC): Programmable from API

Automatic Volume Control (AVC): Programmable from API

Activity Detection Programmable from API Frequency Response: 300 - 3400 Hz (+/- 3dB)

Software

SDK AudioCodes Native SmartWORKS API SmartControl (Control Panel) SmartVIEW (Card functionality test application)

DTMF Tone Detection DTMF digits: 0 - 9, *, #, A, B, C, D Dynamic range: -38 dBm to 0 dBm Minimum tone detection: 40 ms / programmable

Interdigit timing: 40 ms min.

Acceptable twist Per LSSGR sec. 6, 8 dB forward, 4 dB reverse Frequency variation: Accept all +/- 1.5%, reject all +/-2.5%

Noise tolerance: Per LSSGR sec. 6

Talk off Bellcore TR-TSY-00076

Encoding & Decoding 5.3 Kb/s: G.73., 6.3 Kb/s: G.73., 8 Kb/s: G.79A, 3 Kb/s: GSM 6.0, Microsoft GSM, 6 Kb/s: G.76,

4 Kb/s: G.76, OKI, 3 Kb/s: G.76, OKI, 40 Kb/s: G.76, 64 Kb/s: -law or A-law per G.7,

8 bit linear PCM (signed & unsigned) 96 Kb/s: 6 Khz 6 bit linear PCM(signed),

8 Kb/s: 6 bit linear PCM (signed & unsigned)

Wave le formats Microsoft GSM, Linear signed 8 & 16-bit PCM


Power Requirements

+ 3.3 VDC: .8 A +5 VDC: 5 mA - VDC: n/a + VDC: 0 mA

Safety and Certications

Telecom: DOC, Emissions: FCC Part 5 class A EN 550, Immunity: EN 5504, Safety: EN 60950,


Models Avaiable

Single E/T: DP309

Dual E/T: DP6409

Specifcations



SmartWORKS DP



































Lod, Israel 705

Tel: +97-3-976-4000

Fax: +97-3-976-4040

US Headquarters

7 Worlds Fair Drive

Somerset, NJ 08873

Tel: -73-469-0880

Fax: -73-469-98










Ref:# LTRM-008 V. /06


11/37

SmartWORKS DT Digital Terminate Card

SotwareSwitchableT1/E1Interace

Auto-confguresorallISDNvariants

ANIandDNIS

On-boardDSPtocompletevoiceprocessing

CODECSupport

The SmartWORKS DT provides trunk termination and c

control on digital T/E networks. Call Progress Monitor

(CPM), DTMF detection, voice play/record, and barge-in featu

makes this blade an invaluable resource for interactive telepho

applications.

Terminate Environment

The SmartWORKS DT connects directly to a Central Office

PBX providing line supervision to answer and generate inbou

and outbound calls. Each blade processes up to 60 channe

with a maximum of 5 channels per system. Each chann

has programmable volume control, tone generation, ec

cancellation, and Call Progress Monitoring. Outbound dialand call control is managed through the SmartWORKS API.

International ISDN Support

The SmartWORKS DT supports Channel Associated Signal

(CAS), and any Q.93 based ISDN variant. Trunk coding a

framing is selected on a per framer basis. This allows a sing

blade to control two trunks, each with dif ferent settings.


Network conditions and call statistics are available via t

SmartWORKS API. Event driven alarms are reported for lo

of signal conditions or synchronization errors. Framer and c

statistics are available through standard API function calls.









Stereo Recording

Echo Cancellation



Media Streaming

Live Monitoring

Start/Stop Call Recording Triggers Beep tone generation for passive mode

PSTN

16 Channels 16 Channels

PSTN

SmartWORKS DT Series SmartWORKS DT Series

Applications:Auto-Attendant

Voice MailVoice Portal

Applications:Auto-Attendant

Voice MailVoice Portal

PBX



12/37

Specifcations



System Requirements

Hardware Pentium 4 or equivalent GHz or better PCI motherboard or passive backplane with 3.3V power supply, PCI . bus


Technical Specications Max boards per system: Any combination up to 512 ports Max ports per system: Up to 512

Control Microprocessor Motorola Coldre RISC (50 MHz)

DSP Multiple Texas Instruments TMS30C5409 A Boards errors: On-board LEDs Clocking: Master/Slave

DRAM: 6 MB per board SRAM: 8 Kword/DSP

Environmental Conditions Operating Temperature: 0C to +50C Storage Temperature: -0C to +85C Humidity: 8% to 80% non-condensing

Storage humidity: 8% to 80% non-condensing

Physical Characteristics Form Factor: Full-size PCI card

Telephony Interface

Host Interface Bus Compatibility: Complies with PCISIG Bus Specications: Rev. 2.2 Bus Speed: 33 MHz

Bus Mode: 3 bit bus master/target Shared Memory: 6 MB Global shared RAM

Trunk Type T/E Trunk Interface: Digital network interface Connectors: RJ-45 connectors

T Interface Receive Clock Rate: .544 MHz +/-00ppm Transmit Clock: Recovered RX clock or 50 ppm

Input Level: LBO 0dB to -dB Framing: SF (D4), ESF Line Coding: AMI, B8ZS

Signaling Protocol ISDN, NFAS, CAS, Robbed Bit Signaling, E&M Immediate, E&M wink, FXS, FXO

Clock and Data Recovery: Complies with AT&T TR64 and Bellcore TA-TSY-00070

E Interface Receive Clock Rate: .048 +/- 75ppm Transmit Clock: Recovered RX clock or 50 ppm Input Level: 3.V down to 0.45 V

Framing: Basic G.704, CRC-4 Line Coding: AMI, HDB3 Signaling Protocol: ISDN, DASS, CAS

Loss of Signal Detection: per ITU-T G.775 Alarm Detection and Integration: LOS, LOSMF, TS6, CRC, and Yellow

Binary Sequence Detector: Per ITU-T 0.5

Loss of Signal Detection ANSI T.3 Alarm Detection and Integration: LOS, LOF, Yellow, and AIS per ANSI T.3


Audio Signal Receive range: -68 dBm to + 3 dBm Input gain control: +4 to -50 dB Silence Detection: Programmable from API

Transmit volume control: +4 to -50 dB Automatic Gain Control (AGC) Programmable from API

Automatic Volume Control (AVC) Programmable from API Activity Detection Programmable from API

Alert Tone Programmable Frequency Response 300 - 3400 Hz (+/- 3dB)

Softtware

Call Progress Monitoring Number of programmable tones: 20 Number of bandpass lters: 10 Number of lters per tone: 1,2 or 3Number of cycles: 0 to 55 SIT tones: Yes, programmable frequencies and duration Answering Machine Detection: Yes

Audio Digitizing 5.3 Kb/s: G.73. 6.3 Kb/s: G.73. 8 Kb/s: G.79A 3 Kb/s: GSM 6.0, Microsoft: GSM 6 Kb/s: G.76

4 Kb/s: G.76, OKI 3 Kb/s: G.76, OKI 40 Kb/s: G.76 64 Kb/s: -law or A-law per G.7

8 bit linear PCM (signed & unsigned) 96 Kb/s: 6 Khz 6 bit linear PCM(signed)

8 Kb/s: 6 bit linear PCM (signed & unsigned)

Wave le formats Microsoft GSM, Linear signed 8 & 16-bit PCM Digitization selection: Programmable per channel,

independent for encode and decode

DTMF/MF Tone Detection DTMF digits: 0 - 9, *, #, A, B, C, D MF R Digits 5 Digits Forward & Reverse per Q.44

Dynamic range: -38 dBm to 0 dBm Minimum tone detection: 40 ms /programmable Interdigit timing: 40 ms min.

Tone Dialing: Frequency variation less then Hz Rate API Programmable

Acceptable twist Per LSSGR sec. 6, 8 dB forward, 4 dB reverse Frequency variation: Accept all +/- 1.5%, reject all +/-2.5%

Noise tolerance: Per LSSGR sec. 6 Talk off: Bellcore TR-TSY 00076

Trigger Conditions Event Driven Caller ID, Min/Max silence, Min/Max activity

Global Tone Generation Tone Type Single or dual frequency Frequency range 300 Hz 3400 Hz Frequency resolution Hz

Duration ms 89 ms programmable in ms steps Amplitude +3 dBm to 68 dBm Duration API Programmable

Voice Processing Echo cancellation G.65 Caller ID V.3 & Bell 0 DTMF Detector Primary & Secondary channel MF Detection R & R

Safety and Certications Telecom: DOC Emissions: FCC Part 15 class A EN 55022 Immunity: EN 55024 Safety: EN 60950


Models Available: DT309 Single E/T DT6409 Dual E/T

SDK: AudioCodes Native SmartWORKS API SmartControl (Control Panel) SmartVIEW (card functionality test application)

SmartWF (rmware ash update utility)

Power Requirements

+3.3 VDC: .8 Amp +5 VDC: 5mA - VDC: Not Required + VDC: 0 mA



































Lod, Israel 705

Tel: +97-3-976-4000

Fax: +97-3-976-4040

US Headquarters

7 Worlds Fair Drive

Somerset, NJ 08873

Tel: -73-469-0880

Fax: -73-469-98










Ref.# LTRM-009 V. /06

SmartWORKS DT


13/37

SmartWORKS IPX-C Call Recording for IP-PBXs

MultiplePBXSupport

MultipleProtocolSupport

MirrorPortIndependent

FlexibleEventTriggering

RTPForwarding

PSTN

TX100

IPM 260

SmartWORKS IPX-C

SmartWORKS IPX-C

IPM 260

IP Phones

Workgroup Switch

IP Phones

Workgroup Switch

Core Switch

Call Agent

The SmartWORKS IPX-C is an essential component of your

call recording solution that provides packet filtering and media

forwarding for IP-PBXs. Supporting multiple protocols, it has

on-board connections for monitoring up to 56 stations of

upstream and downstream RTP and one on-board connection

for media output. When combined with an IPM60, the IPX-C

provides complete event triggering, call state reporting and media

processing for many of the industry leading IP-PBXs.

Tapping Environment

The IPX-C is designed for IP call recording applications. Its active

interfaces can be connected directly to an available mirror port.

When used in conjunction with a TX100, it can be connectedpassively anywhere within the IP-PBX configuration.

Each blade is capable of processing up to 56 media sessions.

Session Management

The IPX-C includes a Session Manager for tracking media sessions

on the IP network. Each media session is treated as a unique call

with a unique session ID.

Your application can easily manage call forwarding with the

session IDs provided by the IPX-C.

Station Management

Automatically locates all VoIP stations on the network and assigns

a unique ID to each endpoint. IPX-C dynamically identifies phonesas they are added to the network and reports when they are

removed.



14/37

System Requirements

Hardware P4 CPU at 850MHz

ATX PCI motherboard or passive back-plane with 3.3V ATX power supplier

PCI .3 bus Bus speed: 33 or 66 MHz Bus mode: 3 bits

Operating Systems Windows 000, 003 server, and XP

Linux (planned for Q 007)

Technical Specications Max. per system: 16 Blades

3 LEDs - blade state LED - host to blade communication LEDs per Ethernet port

Environmental conditions Operating Temperature: 0C to 50C

Storage temperature: -0C to 85C.

Humidity: 8% to 80% non-condensing

Storage humidity: 8% to 80% non-condensing

Physical characteristics Form factor: Full size PCI card

Host interface: Complies with PICMG .3

Ethernet Interface: Complies with 80.3 0/00Base-TConnector: 3xRJ45

VoIP protocols Cisco Call Manager (Skinny)

Avaya Ofce Manager (H.323)

Ericsson (H.33)

Nortel (Unistem)

SIP (Station Side) / (Trunk Side)

Alcatel OmniPCX 4400

Siemens Hi-Path 4000

Planned: Mitel 3300, Intertel CS-500, NEAX 400

Product Specs and Info

Power 3.3 V: A

+5V: 5mA

Safety and Certications:

Emissions EN550, FCC part 5 class A

Immunity EN5504

Safety EN60950

Accessories TX00

TX00PCI

Warranty year standard

Optional Accessories

TX00 North America 90.033.003

TX00 Universal 90.033.00

TX00i 90.033.004

9 Racmount Kit (Max 3) 90.033.005

Blank Panel 90.033.006

Supported with SmartWORKS 3.9

Specifcations





































Lod, Israel 705

Tel: +97-3-976-4000

Fax: +97-3-976-4040

US Headquarters

7 Worlds Fair Drive

Somerset, NJ 08873

Tel: -73-469-0880

Fax: -73-469-98










Ref. # LTRM-006 V. /06

SmartWORKS IPX-C



15/37

The RTS BOX is a tap-point product designed for use

with the SmartWORKS NGX. Using the RTS BOX with

two NGX400 blades provides a 4-port solution for

call recording applications.

The RTS BOX provides voice and D-channel data

for the Avaya INDeX, Mitel SX00/SX000 and the

Siemens Rolm 975. The unique design supports all

3 PBXs with one assembly. The RJx Amp connectors

provide reliable connections to the NGX, PBX, and

phones by treating the PBX as a 4-wire supporting

half the channels.

ProvidesbothvoiceandD-channeldataor:

AvayaINDeX

MitelSX200/SX2000

SiemensRolm9751

Breaksoutull-duplexsignalinto2hal-duplexsignals

Passivedevice-Nopowersupplyrequired

PSTN

SmartTAP NGX Series


PBX

RTS BOX

Phones

RTS Box Resistive Tap Splitter



16/37



RTS Box




































Lod, Israel 705

Tel: +97-3-976-4000

Fax: +97-3-976-4040

US Headquarters

7 Worlds Fair Drive

Somerset, NJ 08873

Tel: -73-469-0880

Fax: -73-469-98










Ref. # LTRM 07 V. /06


17/37

The TX100 provides two active receive connections to

network monitoring equipment such as an AudioCode

IPX-C and IPR or AudioCodes IPM60. It can be place

anywhere in the configuration between two netwo

devices. Designed with passive circuitry, the TX00

access point does not introduce and point of failur

in the network even if there is no power to the devic

The traffic from the access point is amplified and balance

for connection to network monitoring equipmen

Upstream and downstream traffic are separated foimproved application flexibility.

Provides2activeconnectionstonetworkmonitoringequipment

Separateconnectionsormonitoringupstreamanddownstreamtrafc

Passiveaccesspointto10/100BaseTnetworkdevicesandtrafc

Networktransparent,thisdevicedoesnotrequireaMac/IPaddress

Compatiblewithallmajormanuacturersnetworkequipment

Redundantpowersupplyoptionprovidesaulttoleranceorlogging

TX00 For use with IPX-C and IPR

TX100

TX100

IPM 260

SmartWORKS IPX

SmartWORKS IPX

IPM 260

IP Phones

Workgroup Switch

IP Phones

Workgroup Switch



18/37

System Requirements

Dimensions /4H x 5 9/6 W x 5 /4 D

Power Supply Vdc, 00mA

Max cable length (from TX00 to IPX-C / IPR): TBD

Specifcations



TX00



































Lod, Israel 705

Tel: +97-3-976-4000

Fax: +97-3-976-4040

US Headquarters

7 Worlds Fair Drive

Somerset, NJ 08873

Tel: -73-469-0880

Fax: -73-469-98










Ref. # LTRM-0034 V. /06


19/37


20/37

007. AudioCodes Ltd. All rights reserved. AC, Ardito, AudioCodes, AudioCodes logo, AudioCode

IPmedia, Mediant, MediaPack, MP-MLQ, NetCoder, Stretto, TrunkPack, VoicePacketizer and

VoIPerfect are trademarks or registered trademarks of AudioCodes Ltd. All other marks are the

property of their respective owners. The information and specifications in this document and the

product(s) are subject to change without notice.


21/37


22/37

007. AudioCodes Ltd. All rights reserved. AC, Ardito, AudioCodes, AudioCodes logo, AudioCoded






23/37


24/37

007. AudioCodes Ltd. All rights reserved. AC, Ardito, AudioCodes, AudioCodes logo, AudioCoded,






25/37


26/37







27/37


Costeective,feld-proventechnology

Standardsbasedintegration

Widerangeochanneldensities MajorwirelineandwirelessLBRcodersupport

Shorterdevelopmentcycle

The Transcoding Resource Blade (TRB) family of products is

complete transcoding resource solution based on AudioCodes

successful IPmedia product line. The TRB blades provide enhance

performance features that enable complex wireline and wireles

transcoding required in IP Multimedia Subsystem (IMS) architectur

and other VoIP implementations.

Deliver Feature-Rich Solutions

TRB products support IP to IP conversion of a wide range of standar

and low bit-rate (LBR) coders, including: G.7, G.76, G.77G.73., G.79.a, iLBC, GSM-FR, GSM-EFR, AMR and EVRC*.

addition to voice coders, the TRB family also supports conversion o

G.7 fax to T.38 and a number of DTMF conversions.

Protect Customer Investment

The TRB product family is based on the VoIPerfect architecture

AudioCodes underlying, best-of-breed, core media gateway technolog

Transcoding features are managed via industry-standard SIP or vi

the high-performance AudioCodes API, which enables softwa

download, provisioning, and session control. The AudioCodes AP

was designed to maintain essential backward compatibility in orde

to protect customers investment in the development of product

based on former generations.

Enable Fast & Easy Integration

Enabling accelerated design cycles with high density and reduce

costs, the TRB is an ideal building block for scalable, reliable VoI

enabled media processing solutions. With TRBs comprehensiv

feature set, customers can quickly design a wide range of solutions

Features

Up to 008 Full Duplex transcoding sessions on a single blade

Broad list of supported coder combinations

PCI, cPCI and ATCA** form factors

Fax (G.7 to T.38)

Encryption

Packet Loss Concealment

Low Latency

Network connectivity (single and dual subnet)

API or SIP control

No external equipment is necessary

* See release notes for a detailed list of supported transcoding

combinations and densities

** Available soon.

Transcoding Resource Blade Series

IPM-60/TRB: PCI/0 Full Duplex Sessions

IPM-60/TRB: cPCI/40 Full Duplex Sessions

IPM-630/TRB: cPCI/008 Full Duplex Sessions


28/37


SpecifcationsSystem Requirements IPM260/TRB IPM1610/TRB IPM6310/TRB

Operating System Windows 000, XP, 003 - Linux - Solaris on Intel/Sparc

Hardware Requirements IPM260/TRB IPM1610/TRB IPM6310/TRB

Form Factor Full Length PCI cPCI 6U PICMG .6 cPCI 6U PICMG .6

Ethernet 0/00BaseT Dual Redundant 0/00BaseT Dual Redundant 0/00/000BaseT

Ethernet Physical RJ-45 cPSB PICMG .6 on backplane cPSB PICMG .6 on backplane

or Dual RJ-45 or Dual RJ-45

Software IPM260/TRB IPM1610/TRB IPM6310/TRB

Full Duplex Transcoding Sessions 5, 30, 60 or 0 30, 60, 0 or 40 008

Voice Transcoding G.7, G.73., G.79A/B, G.76/G.77, NetCoder, MS-GSM, GSM-FR, GSM-EFR, iLBC, EVRC, NB-AMR

Voice Processing Features Voice Activity Detection (VAD) and Comfort Noise Generation (CNG)

Gain Control: Automatic (AGC) or Programmable

RTP Forking replications for lawful intercept (CALEA)Fax Transcoding G.7 to T.38 Concurrent fax on all channels

DTMF Conversion In-band DTMF to RFC 833, SIP-INFO or SIP-NOTIFY

Media Encryption / Decryption SRTP RFC 37

Control AudioCodes proprietary API VoPLIB, SIP

Control Interface Ethernet or PCI bus

Control Security HTTPS, IPSec and PacketCable

Management SNMP Vc: Standard MIB-, RTP MIB and AudioCodes proprietary MIB

Embedded Web Server

Power Requirements IPM260/TRB IPM1610/TRB IPM6310/TRB

8W 40.7 W 40-85 W

Transcoding Resource Blade Series














gateway and media server channels globathe past few years and is a key originator of



















Lod, Israel 705

Tel: +97-3-976-4000

Fax: +97-3-976-4040

US Headquarters

7 Worlds Fair Drive

Somerset, NJ 08873

Tel: -73-469-0880

Fax: -73-469-98










Ref. # LTRM-005 V. /06


29/37


30/37







31/37


32/37







33/37


35/37


36/37







37/37

About AudioCodes

AudioCodes Ltd. (NASDAQ: AUDC), Your Gateway to VoIP, provides

innovative, reliable and cost-effective Voice over Packet (VOP) technology,

Voice Network products, and applications to OEMs, Network Equipment

Providers, Service Providers and System Integrators worldwide.

AudioCodes provides a diverse range of flexible, comprehensive media

gateway and media processing technologies (based on VoIPerfect

AudioCodes underlying, best-of-breed, core media gateway architecture)

and Session Border Controllers (SBCs). The company is a market leader

in product development, focused on VoIP Media Gateway, Media Server

and SBC technologies and network products. AudioCodes has deployed

tens of millions of media gateway and media server channels globally

over the past few years and is a key origina tor of the ITU G.73. standard

for the emerging Voice over IP market. The Company is a VoIP technology

leader focused on quality, having recently received a number one ranking

from ETSI for outstanding voice quality in its media gateways and media

servers. AudioCodes voice network products feature media gateway and

media server platforms for packet-based applications in the converged,

wireline, wireless, broadband access, enhanced voice services and video

markets. AudioCodes enabling technology products include VoIP and CTI

communication blades, VoIP media gateway processors and modules, and

CPE devices. AudioCodes headquarters and R&D facilities are located in

Israel with an R&D extension in the U.S. Other AudioCodes offices are

located in Europe, the Far East, and Latin America. For further information

on AudioCodes, visit www.audiocodes.com



Lod, Israel 705

Tel: +97-3-976-4000Fax: +97-3-976-4040

US Headquarters

7 Worlds Fair Drive

Somerset, NJ 08873

Tel: -73-469-0880

Fax:-73-469-98



007 AudioCodes Ltd. All rights reserved. AudioCodes, AC, Ardito,

AudioCoded, NetCoder, TrunkPack, VoicePacketizer, MediaPack,

Stretto, Mediant, VoIPerfect and IPmedia, OSN, Open Solutions

Network , Whats Inside Ma tters, Your Gateway To VoIP, 3GX and Nuera ,Netrake, InTouch, CTI and CTI Squared are trademarks or registered

trademarks of AudioCodes Limited. All other products or trademarks

are property of their respective owners.

LTRM-20036 V.1 03/07

audio codes product catalog

Documents