“Serving You With Locations Throughout The Nation”Glasfloss has a policy of uninterrupted research, development and product improvement and reserves the right to change design and specifications without notice.

www.glasfloss.com · (214) 741-7056 PRODUCT BULLETIN 3 ARO • SECTION 3 • 3-8-2016

[ ] AUTOMATIC ROLL FILTERS

Glasfloss manufactures a complete line of roll filters for au-tomatic roll machines. Glasfloss Automatic Roll Filters aredesigned to replace the original equipment filter with nomodification. Glasfloss Automatic Roll Filters are availablein different grades of fiberglass and polyester media in moststandard widths.

FEATURES >

Glasfloss Automatic Roll Filters are designedto fit in automatic, semi-automatic and manualtype roll filter machines without modificationto existing hardware. Glasfloss Roll Filtersshall incorporate progressively dense fiberglassmedia or 100% non-woven polyester media.For added strength, the progressively densefiberglass and 100% non-woven polyestergrades of media shall incorporate a scrim back-ing on the air-exit side. Glasfloss AutomaticRoll Filters shall incorporate a heavy-dutypaper leader and trailer that is sewn to themedia. The automatic roll filter’s media stan-dard length shall be sixty-five feet.

APPLICATIONS<

• Progressively Dense Fiberglass or 100% Non-Woven Polyester

• Scrim Backing• Heavy-Duty Paper Leader and Trailer

Industrial facilities, commercial buildings, governmentinstallations, schools and universities use GlasflossAutomatic Roll Filters. Whether the automatic rollmachine is vertical or horizontal, Glasfloss AutomaticRoll Filters are available on cores designed to fit allmajor roll machine manufacturers.

SPECIFICATIONS >

Core meets exactingstandards

Scrim backing onair-leaving side

Progressively dense fiber-glass or 100% non-woven

polyester

Heavy-duty kraftpaper leader

“Serving You With Locations Throughout The Nation”Glasfloss has a policy of uninterrupted research, development and product improvement and reserves the right to change design and specifications without notice.

www.glasfloss.com · (214) 741-7056

RES

ISTA

NC

E IN

. W.G

.

AIR FLOW RATE, (FPM)

0

0.1

0.2

0.3

0.4

0.5

250 300

EC II 1250 PHOENIX

350 400 450 500

STANDARD PRESSURE DROPTest Filter Size 24" x 24" Nominal

PHOENIX

REM

OVA

L PE

RC

ENTA

GE

PARTICLE SIZE, MICRONS

0

20

40

60

80

100

.1 1 10

MINIMUM PARTICLE SIZE EFFICIENCYTest Filter Size 24" x 24" Nominal

1250

1250 Automatic Roll Filters shall consist of a nominal 5/8" thick 100% non-woven polyester mediawith a scrim backing. 1250 media is engineered for moderate dust-loading applications. 1250 mediashall be white in color. Heavy-duty kraft paper leader and trailer shall be sewn to the media to facil-itate installation and removal. The media shall be wound on the specified core and shall be com-patible for installation into the original equipment without modification. The media shall be sixty-fivefeet in length. The media shall have a 70% Average Arrestance per ANSI/ASHRAE 52.2 Test Stan-dard. 1250 Automatic Roll Filters shall incorporate media that is classified under U.L. std. 900.

PHOENIX

PHOENIX Automatic Roll Filters shall consist of a nominal 3/4" thick 100% non-woven polyester orangeand white media with a scrim backing. Phoenix media is engineered for heavy dust-loading applications.Phoenix media is impregnated during manufacturing with a non-migratory tackifier. Heavy-duty kraftpaper leader and trailer shall be sewn to the media to facilitate installation and removal. The media shallbe wound on the specified core and shall be compatible for installation into the original equipment withoutmodification. The media shall be sixty-five feet in length. The media shall receive a MERV 7 rating perANSI/ASHRAE 52.2 Test Standard. Phoenix Automatic Roll Filters shall incorporate media that is clas-sified under U.L. std. 900.

Polyester Specifications

>

>

EC II

EC II Automatic Roll Filters shall consist of a nominal 2" thick continuous filament fiberglass of gradu-ated density with a unidirectional scrim backing. EC II media shall be blue in color. EC II media is en-gineered for moderate dust-loading applications. The fiberglass shall be treated with a non-toxic,odor-free, non-migratory tackifier. Heavy-duty kraft paper leader and trailer shall be sewn to the mediato facilitate installation and removal. The media shall be wound on the specified core and shall becompatible for installation into the original equipment without modification. The media shall be sixty-five feet in length. The media shall have a 77% Average Arrestance per ANSI/ASHRAE 52.2 TestStandard. EC II Automatic Roll Filters shall incorporate media that is classified under U.L. std. 900.

Fiberglass Specifications

>

“Serving You With Locations Throughout The Nation”Glasfloss has a policy of uninterrupted research, development and product improvement and reserves the right to change design and specifications without notice.

www.glasfloss.com · (214) 741-7056

Automatic Roll FilterCore Identification Guide

*The model number must be added as a suffix to the corresponding media designation to obtain proper part number.

American AirRoll-O-MaticKennard

Herman- Nel-son = 8" end

platesElectro-Air

Type AA core is3/4" metal pipe.Core ends are15/16" and13/16" with enddisks of 11" diameter on bothends.

Roll Width20-1/4"22-1/4"24-3/4"31-7/8"32-3/4"38-1/2"39-7/8"44-3/4"56-3/4"68-7/8"

*Model21AA22AA25AA32AA03AA39AA40AA04AA05AA06AA

GlasflossID Code AA

FarrAutomaticManual

Type FA core is2-1/8" I.D.Notched fiber-board tube with no drive pin, discsor cups. MostFarr V-8 (vertical)units use a 1-3/4" I.D. core.

Roll Width8-3/4"14-3/4"20-3/4"26-3/4"32-3/4"38-3/4"44-3/4"50-3/4"56-3/4"68-3/4"

*Model09FA15FA21FA27FA03FA39FA04FA51FA05FA06FA

GlasflossID Code FA

CambridgeAuto Roll

Type CA core is3/4" metal pipe.Core ends are15/16" and 13/16".Metal discs avail-able, specify whenordering.

Roll Width23-3/4"32-3/4"44-3/4"56-3/4"65-3/4"69"

*Model02CA03CA04CA05CA06CA69CA

GlasflossID Code CA

ContinentalConomanualConomaticCommercialFull-Flo

Mine SafetyAppl.(MSA)

Type CO core is3" I.D.fiberboard tubewith drive pin 2-1/2" from one end of tube only.No cups or discsare used.

Roll Width21-7/8"31-7/8"43-7/8"55-7/8"67-7/8"

*Model02CO03CO04CO05CO06CO

GlasflossID Code CO

TraneCarrier

Type TR (Trane)CR (Carrier) coreis 2-7/16" I.D.fiberboard tubewith a metal cupsecured and re-cessed to a depth of 1-1/2" ineach end. Thecups are stampedto form a 1-1/2"square.

Roll Width19-3/8"21-3/8"25-3/4"31-3/8"35-3/8"38-3/4"45-3/8"50-1/4"54-3/8"59-3/8"61-3/4"63-3/8"

*Model19TR21TR25TR31TR35TR38TR45TR50TR54TR59TR61TR63TRGlasfloss

ID Code TR

BLC

Type BLC core is1-1/2" I.D.EMT Conduitwith 11"end plates re-cessed1-3/8" from eachendof core.

Roll Width34-5/8"46-5/8"58-5/8"70-5/8"

*Model35BLC47BLC59BLC71BLC

GlasflossID Code BLC

“Serving You With Locations Throughout The Nation”Glasfloss has a policy of uninterrupted research, development and product improvement and reserves the right to change design and specifications without notice.

www.glasfloss.com · (214) 741-7056

Distributed by:

ULR

Glasfloss is proud to be an Energy StarPartner. The Energy Star Service andProduct Provider Partnership is availableto organizations that provide energy effi-ciency related products and/or services tothe commercial buildings and industrialplants in the United States.

Glasfloss manufactures a variety ofmedium and high efficiency air filterswhich can be specified for LEED cer-tification applications. For specific in-formation on these products, pleasecontact your local Glasfloss SalesRepresentative.

AUTOMATIC ROLL FILTER SPECIFICATIONS>

Glasfloss Automatic Roll Filters are designed to fit in automatic, semi-automatic and man-ual type roll filter machines without modification to existing hardware. Glasfloss AutomaticRoll Filters shall incorporate progressively dense fiberglass media or 100% non-wovenpolyester media. For added strength, the progressively dense fiberglass and 100% non-woven polyester grades of media shall incorporate a scrim backing on the air-exit side.Glasfloss Automatic Roll Filters shall incorporate a heavy-duty paper leader and trailer thatis sewn to the media. The automatic roll filter’s media standard length shall be sixty-fivefeet.

E: EC II - Nominal 2" fiberglass media with unidirectional scrim backing. The Media shall be blue in color. For moderate dust-loading applications.

P: 1250 - Nominal 5/8" 100% Non-woven polyester media with scrim backing. The media shall be white in color. For moderate-dust loading applications.

X: Phoenix - Nominal 3/4" 100% Non-woven polyester media with scrim backing. The media shall be orange and white in color. Tackified for heavy dust-loading applications.

Glasfloss Automatic Roll Filter Ordering CodeExample:

AR E - 05 AA

Glasfloss Auto Roll

Media Type

Core Type

Core Width

AUTOMATIC ROLL FILTER MEDIA SPECIFICATIONS>