attachment 4 - approved manufacturers list
TRANSCRIPT
-
7/29/2019 Attachment 4 - Approved Manufacturers List
1/101
21 /02/2012
SERMETERIAL / EQUIPMENT
DESCRIPTION MANUFACTURER FACTORY LOCATIONPre-Qualified
ManufacturersBy SEC
REMARKS
1 POWER TRANSFORMERS
33KV & 34.5 KV PRIMARY11 .
POWER TRANSFORMERS UP TO 30 MVA1. 1. 1 53-TMSS-01Applicable Standards:
SWEDEN YesABB
United States-N/A YesABB ( T& D)
SPAIN-Bilbao Yes Based on TS&SD letter# 09-F01546/03-03032301 dated 19th.
Aug 2009, it is pre-qualified for Power Transformer up to 132kV,100MVA as confirming to SEC specification # 53-TMSS-01, rev.0with the following conditions:
All type, design, special & routine tests (including short
circuit test) as per SEC specifications/standards shall be carriedout on the first unit to be supplied to SEC in securing an order in
the presence of three (3) SEC engineers & one (1) approvedindependent inspection agency Inspector.
Seven (7) years warranty from the date of PAC of theturnkey project in case of contract award or date of delivery incase of direct material supply order.
ABB Bilbao
TURKEY-Istanbul Yes Pre-Qualification & Participation for current & future SEC'sProjects subjected to the mutual agreement between SEC & ABB
dated 09 March 2009
ABB Elektrik Sanayi A.S. [previously ABB ESAS]
FINLAND YesABB TRANSIT OY
GERMANY YesAREVA
TURKEY Yes Complete Type, Routine / Sample tests for first order & 10 YearsWarranty from the date of PAC is required.BEST
BELGIUM YesCG POWER SYSTEMS
INDIA Yes SUSPENDED FOR SEC 2005 PROJECTS AND ONWARDCROMPTON GREAVES
JAPAN-OSAKA YesDAIHEN CORPORATION
United Kingdom YesHAWKER SIDDELEY
KOREA, Republic of-Changwon YesHYOSUNG (HICO)
Page 1 of 101
-
7/29/2019 Attachment 4 - Approved Manufacturers List
2/101
SERMETERIAL / EQUIPMENT
DESCRIPTION MANUFACTURER FACTORY LOCATIONPre-Qualified
ManufacturersBy SEC
REMARKS
KOREA, Republic of-Ulsan YesHYUNDAI
JAPAN YesJAPAN AE POWER SYSTEMS CORP.
FRANCE YesJEUMONT SCHNEIDER
JAPAN-- Yes ORIGINALLY TMT&D CORP. & DISSOLVED DURING APRIL 2005.MITSUBISHI
Romania-Craiova Yes Based on TS&SD letter # 11-002054-1-03032300 dated10/7/2011, it is prequalified for Power Transformer up to 132kV,
100MVA, as confirming to SEC specification # 53-TMSS-01,
Rev.0 with the following conditions:
All Type, Special, Routine and Sample tests (including shortcircuit withstand test) as per SEC specifications/standards shallbe carried out on the first batch of power transformer to besupplied to SEC in presence of three SEC Engineers and one (1)
SEC approved independent inspection agency inspector at SECapproved Independent laboratory, all the related costs forwitnessing the tests will be borne by the manufacturer. This was
confirmed by SC Electroputere SA through letter # 27499 dated14/06/2010.
Ten (10) years extended warranty from the date of PAC of the
turnkey project in case of contract award or date of delivery incase of direct material supply order. This was confirmed by SC
Electroputere SA through letter 27500 dated 14/06/2010.
SC ELECTROPUTERE SA
TURKEY-Kocaeli Yes Previously "AREVA-Turkey", the name has been changed to
Schneider Electric-Turkey based on Schneider Electric letter #MKT-18.01.11 dated 18/01/2010 and AREVA T&D letter # BF/BL25.11.2010.
SCHNEIDER ELECTRIC
GERMANY YesSCHORCH
GERMANY-NURNBERG YesSIEMENS AG (NURNBERG)
AUSTRIA- WEIZ YesSIEMENS TRANSFORMERS AUSTRIA GMBH &CO KG
JAPAN-- Yes ORIGINALLY TMT&D CORP. & DISSOLVED DURING APRIL 2005.TOSHIBA CORPORATION, T&D
AUSTRALIA-MELBOURNE YesWILSON TRANSF
23Total =
69 KV PRIMARY21 .
POWER TRANSFORMERS UP TO 67 MVA1. 2. 1 53-TMSS-01Applicable Standards:
SWITZERLAND YesABB
SWEDEN YesABB
Page 2 of 101
-
7/29/2019 Attachment 4 - Approved Manufacturers List
3/101
SERMETERIAL / EQUIPMENT
DESCRIPTION MANUFACTURER FACTORY LOCATIONPre-Qualified
ManufacturersBy SEC
REMARKS
United States-N/A YesABB ( T& D)
SPAIN-Bilbao Yes Based on TS&SD letter# 09-F01546/03-03032301 dated 19th.Aug 2009, it is pre-qualified for Power Transformer up to 132kV,100MVA as confirming to SEC specification # 53-TMSS-01, rev.0with the following conditions:
All type, design, special & routine tests (including shortcircuit test) as per SEC specifications/standards shall be carried
out on the first unit to be supplied to SEC in securing an order inthe presence of three (3) SEC engineers & one (1) approvedindependent inspection agency Inspector.
Seven (7) years warranty from the date of PAC of theturnkey project in case of contract award or date of delivery incase of direct material supply order.
ABB Bilbao
TURKEY-Istanbul Yes Pre-Qualification & Participation for current & future SEC's
Projects subjected to the mutual agreement between SEC & ABBdated 09 March 2009
ABB Elektrik Sanayi A.S. [previously ABB ESAS]
FINLAND YesABB TRANSIT OY
GERMANY YesAREVA
TURKEY Yes Complete Type, Routine / Sample tests for first order & 10 YearsWarranty from the date of PAC is required.
BEST
BELGIUM YesCG POWER SYSTEMS
JAPAN-OSAKA YesDAIHEN CORPORATION
PORTUGAL YesEFACEC
KOREA, Republic of-Changwon YesHYOSUNG (HICO)
KOREA, Republic of-Ulsan YesHYUNDAI
JAPAN YesJAPAN AE POWER SYSTEMS CORP.
FRANCE YesJEUMONT SCHNEIDER
Croatia/Hrvatska Yes Limited to 40 MVA Only. Complete Type, Routine / Sample testsfor first order & 10 Years Warranty from the date of PAC isrequired.
KONCAR D&ST
JAPAN-- Yes ORIGINALLY TMT&D CORP. & DISSOLVED DURING APRIL 2005.MITSUBISHI
Page 3 of 101
-
7/29/2019 Attachment 4 - Approved Manufacturers List
4/101
SERMETERIAL / EQUIPMENT
DESCRIPTION MANUFACTURER FACTORY LOCATIONPre-Qualified
ManufacturersBy SEC
REMARKS
Romania-Craiova Yes Based on TS&SD letter # 11-002054-1-03032300 dated10/7/2011, it is prequalified for Power Transformer up to 132kV,100MVA, as confirming to SEC specification # 53-TMSS-01,
Rev.0 with the following conditions:
All Type, Special, Routine and Sample tests (including shortcircuit withstand test) as per SEC specifications/standards shall
be carried out on the first batch of power transformer to besupplied to SEC in presence of three SEC Engineers and one (1)
SEC approved independent inspection agency inspector at SECapproved Independent laboratory, all the related costs forwitnessing the tests will be borne by the manufacturer. This wasconfirmed by SC Electroputere SA through letter # 27499 dated14/06/2010.
Ten (10) years extended warranty from the date of PAC of theturnkey project in case of contract award or date of delivery in
case of direct material supply order. This was confirmed by SCElectroputere SA through letter 27500 dated 14/06/2010.
SC ELECTROPUTERE SA
TURKEY-Kocaeli Yes Previously "AREVA-Turkey", the name has been changed toSchneider Electric-Turkey based on Schneider Electric letter #MKT-18.01.11 dated 18/01/2010 and AREVA T&D letter # BF/BL
25.11.2010.
SCHNEIDER ELECTRIC
GERMANY-Dresden Yes based on TS&SD letter# 09-01501-03032301 dated 25th May
2009 , Siemens AG from Germany-Dresden for PowerTransformer up to 230kV, 200MVA as confirming to SEC
specification # 53-TMSS-01, rev.0 & 53-TMSS-02, rev.0 with thefollowing conditions: All type, special & routine tests for each voltage class asper SEC specifications/standards shall be carried out on the first
batch to be supplied to SEC in securing an order in the presenceof three (3) SEC engineers & one (1) approved independentinspection agency Inspector.
Ten (10) years warranty from the date of PAC of theturnkey project in case of contract award or date of delivery incase of direct material supply order.
Siemens AG (Dresden)
GERMANY-NURNBERG YesSIEMENS AG (NURNBERG)
AUSTRIA- WEIZ YesSIEMENS TRANSFORMERS AUSTRIA GMBH &
CO KGITALY YesTAMINI
JAPAN-- Yes ORIGINALLY TMT&D CORP. & DISSOLVED DURING APRIL 2005.TOSHIBA CORPORATION, T&D
AUSTRALIA-MELBOURNE YesWILSON TRANSF
25Total =
110 KV TO 132 KV PRIMARY31 .
Page 4 of 101
-
7/29/2019 Attachment 4 - Approved Manufacturers List
5/101
SERMETERIAL / EQUIPMENT
DESCRIPTION MANUFACTURER FACTORY LOCATIONPre-Qualified
ManufacturersBy SEC
REMARKS
POWER TRANSFORMERS UP TO 100 MVA1. 3. 1 53-TMSS-01Applicable Standards:
SWITZERLAND YesABB
SWEDEN YesABB
United States-N/A YesABB ( T& D)
SPAIN-Bilbao Yes Based on TS&SD letter# 09-F01546/03-03032301 dated 19th.
Aug 2009, it is pre-qualified for Power Transformer up to 132kV,100MVA as confirming to SEC specification # 53-TMSS-01, rev.0with the following conditions:
All type, design, special & routine tests (including shortcircuit test) as per SEC specifications/standards shall be carriedout on the first unit to be supplied to SEC in securing an order in
the presence of three (3) SEC engineers & one (1) approvedindependent inspection agency Inspector.
Seven (7) years warranty from the date of PAC of theturnkey project in case of contract award or date of delivery incase of direct material supply order.
ABB Bilbao
TURKEY-Istanbul Yes Pre-Qualification & Participation for current & future SEC'sProjects subjected to the mutual agreement between SEC & ABB
dated 09 March 2009
ABB Elektrik Sanayi A.S. [previously ABB ESAS]
FINLAND YesABB TRANSIT OY
GERMANY YesAREVA
TURKEY YesAREVA
TURKEY Yes Complete Type, Routine / Sample tests for first order & 10 Years
Warranty from the date of PAC is required.
BEST
BELGIUM YesCG POWER SYSTEMS
INDIA Yes SUSPENDED FOR SEC 2005 PROJECTS AND ONWARD.CROMPTON GREAVES
JAPAN-OSAKA YesDAIHEN CORPORATION
PORTUGAL YesEFACEC
United Kingdom YesHAWKER SIDDELEY
KOREA, Republic of-Changwon YesHYOSUNG (HICO)
KOREA, Republic of-Ulsan YesHYUNDAI
Page 5 of 101
-
7/29/2019 Attachment 4 - Approved Manufacturers List
6/101
SERMETERIAL / EQUIPMENT
DESCRIPTION MANUFACTURER FACTORY LOCATIONPre-Qualified
ManufacturersBy SEC
REMARKS
Bulgaria-Sofia Yes Based on TS&SD letter # 11-00438-03-03032301 dated15/05/2011, it is prequalified for Power Transformers up to132kV, 100MVA as confirming to SEC specification #
53-TMSS-01, Rev.0 with the following conditions:
All type, special, routine and sample tests as per SECspecifications/standards
for Power Transformers up to 132kV, 100MVA shall be carriedout in case of contract award or SEC direct purchase order at
SEC approved independent laboratory or at manufacturerstesting laboratory in presence of three (3) SEC Engineers andone (1) SEC approved independent inspection agency. All therelated costs for witnessing of the tests will be borne by themanufacturer. This was confirmed by HHIBulgaria through
letter # D-0353 dated 20/08/2010.
Ten (10) years extended warranty from the date of PAC of the
turnkey project in case of contract award or date of delivery incase of direct material supply order. This was confirmed byHHIBulgaria through letter # D-0355 dated 20/08/2010.
Hyundai Heavy Industries Co. Bulgaria
JAPAN YesJAPAN AE POWER SYSTEMS CORP.
FRANCE YesJEUMONT SCHNEIDER
Croatia/Hrvatska Yes Limited to 40 MVA Only. Complete Type, Routine / Sample tests
for first order & 10 Years Warranty from the date of PAC isrequired.
KONCAR D&ST
JAPAN-- Yes ORIGINALLY TMT&D CORP. & DISSOLVED DURING APRIL 2005.MITSUBISHI
JAPAN YesNISSIN ELECTRIC
Romania-Craiova Yes Based on TS&SD letter # 11-002054-1-03032300 dated10/7/2011, it is prequalified for Power Transformer up to 132kV,
100MVA, as confirming to SEC specification # 53-TMSS-01,Rev.0 with the following conditions:
All Type, Special, Routine and Sample tests (including shortcircuit withstand test) as per SEC specifications/standards shallbe carried out on the first batch of power transformer to besupplied to SEC in presence of three SEC Engineers and one (1)
SEC approved independent inspection agency inspector at SEC
approved Independent laboratory, all the related costs forwitnessing the tests will be borne by the manufacturer. This was
confirmed by SC Electroputere SA through letter # 27499 dated14/06/2010.
Ten (10) years extended warranty from the date of PAC of the
turnkey project in case of contract award or date of delivery incase of direct material supply order. This was confirmed by SCElectroputere SA through letter 27500 dated 14/06/2010.
SC ELECTROPUTERE SA
Page 6 of 101
-
7/29/2019 Attachment 4 - Approved Manufacturers List
7/101
SERMETERIAL / EQUIPMENT
DESCRIPTION MANUFACTURER FACTORY LOCATIONPre-Qualified
ManufacturersBy SEC
REMARKS
GERMANY-Dresden Yes based on TS&SD letter# 09-01501-03032301 dated 25th May2009 , Siemens AG from Germany-Dresden for PowerTransformer up to 230kV, 200MVA as confirming to SEC
specification # 53-TMSS-01, rev.0 & 53-TMSS-02, rev.0 with thefollowing conditions: All type, special & routine tests for each voltage class asper SEC specifications/standards shall be carried out on the first
batch to be supplied to SEC in securing an order in the presenceof three (3) SEC engineers & one (1) approved independent
inspection agency Inspector. Ten (10) years warranty from the date of PAC of theturnkey project in case of contract award or date of delivery incase of direct material supply order.
Siemens AG (Dresden)
GERMANY-NURNBERG YesSIEMENS AG (NURNBERG)
AUSTRIA- WEIZ YesSIEMENS TRANSFORMERS AUSTRIA GMBH &CO KG
JAPAN-- Yes ORIGINALLY TMT&D CORP. & DISSOLVED DURING APRIL 2005.TOSHIBA CORPORATION, T&D
AUSTRALIA-MELBOURNE YesWILSON TRANSF
28Total =
230 KV PRIMARY41 .
POWER TRANSFORMERS UP TO 400 MVA1. 4. 1 53-TMSS-02Applicable Standards:
SWEDEN YesABB
United States-N/A YesABB ( T& D)
SPAIN-Cordoba Yes Based on TS&SD letter# 09-F011657/03-03032301 dated 16th.Aug 2009, it is pre-qualiafied for Power Transformer up to
380kV, 500MVA as confirming to SEC specification #53-TMSS-02, rev.0 with the following conditions: All type, design, special & routine tests (including short
circuit test) as per SEC specifications/standards shall be carriedout on the first unit to be supplied to SEC in securing an order inthe presence of three (3) SEC engineers & one (1) approvedindependent inspection agency Inspector.
Seven (7) years warranty from the date of PAC of theturnkey project in case of contract award or date of delivery incase of direct material supply order.
ABB Cordoba
GERMANY YesAREVA
TURKEY YesAREVA
BELGIUM YesCG POWER SYSTEMS
JAPAN-OSAKA YesDAIHEN CORPORATION
Page 7 of 101
-
7/29/2019 Attachment 4 - Approved Manufacturers List
8/101
SERMETERIAL / EQUIPMENT
DESCRIPTION MANUFACTURER FACTORY LOCATIONPre-Qualified
ManufacturersBy SEC
REMARKS
United Kingdom YesHAWKER SIDDELEY
KOREA, Republ ic of-Changwon Yes Based on TS&SD fax#09-F01255/02-03032301 dated 25th. July2009, it is pre-qualified for Power Transformer up to 380kV,500MVA as confirming to SEC specification # 53-TMSS-02, rev.0with the following conditions:
All type, design, special & routine tests as per SECspecifications/standards shall be carried out on the first batch tobe supplied to SEC in securing an o rder in the presence of three
(3) SEC engineers & one (1) approved independent inspection
agency Inspector. Seven (7) years warranty from the date of PAC of theturnkey project in case of contract award or date of delivery in
case of direct material supply order.
HYOSUNG (HICO)
KOREA, Republic of-Ulsan YesHYUNDAI
JAPAN YesJAPAN AE POWER SYSTEMS CORP.
JAPAN-- Yes ORIGINALLY TMT&D CORP. & DISSOLVED DURING APRIL 2005.MITSUBISHI
GERMANY-Dresden Yes based on TS&SD letter# 09-01501-03032301 dated 25th May
2009 , Siemens AG from Germany-Dresden for PowerTransformer up to 230kV, 200MVA as confirming to SECspecification # 53-TMSS-01, rev.0 & 53-TMSS-02, rev.0 with thefollowing conditions:
All type, special & routine tests for each voltage class as
per SEC specifications/standards shall be carried out on the firstbatch to be supplied to SEC in securing an order in the presence
of three (3) SEC engineers & one (1) approved independentinspection agency Inspector. Ten (10) years warranty from the date of PAC of theturnkey project in case of contract award or date of delivery in
case of direct material supply order.
Siemens AG (Dresden)
GERMANY-NURNBERG YesSIEMENS AG (NURNBERG)
AUSTRIA- WEIZ YesSIEMENS TRANSFORMERS AUSTRIA GMBH &CO KG
JAPAN-- Yes ORIGINALLY TMT&D CORP. & DISSOLVED DURING APRIL 2005.TOSHIBA CORPORATION, T&D
AUSTRALIA-MELBOURNE Yes UP TO 100 MVA ONLYWILSON TRANSF
17Total =
380KV PRIMARY51 .
POWER TRANSFORMERS UP TO 500 MVA1. 5. 1 53-TMSS-02Applicable Standards:
SWEDEN YesABB
United States-N/A YesABB ( T& D)
Page 8 of 101
-
7/29/2019 Attachment 4 - Approved Manufacturers List
9/101
SERMETERIAL / EQUIPMENT
DESCRIPTION MANUFACTURER FACTORY LOCATIONPre-Qualified
ManufacturersBy SEC
REMARKS
SPAIN-Cordoba Yes Based on TS&SD letter# 09-F011657/03-03032301 dated 16th.Aug 2009, it is pre-qualiafied for Power Transformer up to380kV, 500MVA as confirming to SEC specification #
53-TMSS-02, rev.0 with the following conditions: All type, design, special & routine tests (including shortcircuit test) as per SEC specifications/standards shall be carriedout on the first unit to be supplied to SEC in securing an order in
the presence of three (3) SEC engineers & one (1) approvedindependent inspection agency Inspector.
Seven (7) years warranty from the date of PAC of theturnkey project in case of contract award or date of delivery incase of direct material supply order.
ABB Cordoba
GERMANY YesAREVA
TURKEY Yes First Unit to be Type Tested in the presence of 3 SEC Engineers& 1 SEC approved Independent Inspector; Extended Warranty ofSix years.
AREVA
BELGIUM YesCG POWER SYSTEMS
United Kingdom YesHAWKER SIDDELEY
KOREA, Republ ic of-Changwon Yes Based on TS&SD fax#09-F01255/02-03032301 dated 25th. July2009, it is pre-qualified for Power Transformer up to 380kV,
500MVA as confirming to SEC specification # 53-TMSS-02, rev.0with the following conditions:
All type, design, special & routine tests as per SECspecifications/standards shall be carried out on the first batch to
be supplied to SEC in securing an o rder in the presence of three(3) SEC engineers & one (1) approved independent inspectionagency Inspector.
Seven (7) years warranty from the date of PAC of theturnkey project in case of contract award or date of delivery incase of direct material supply order.
HYOSUNG (HICO)
KOREA, Republic of-Ulsan YesHYUNDAI
JAPAN YesJAPAN AE POWER SYSTEMS CORP.
JAPAN-- Yes ORIGINALLY TMT&D CORP. & DISSOLVED DURING APRIL 2005.MITSUBISHI
GERMANY-NURNBERG YesSIEMENS AG (NURNBERG)
AUSTRIA- WEIZ YesSIEMENS TRANSFORMERS AUSTRIA GMBH &
CO KG
JAPAN-- Yes ORIGINALLY TMT&D CORP. & DISSOLVED DURING APRIL 2005.TOSHIBA CORPORATION, T&D
14Total =
2 PAD MOUNTED DISTRIBUTION TRANSFORMERS
13.8 KV, 33KV & 34.5 KV PRIMARY12 .
Page 9 of 101
-
7/29/2019 Attachment 4 - Approved Manufacturers List
10/101
SERMETERIAL / EQUIPMENT
DESCRIPTION MANUFACTURER FACTORY LOCATIONPre-Qualified
ManufacturersBy SEC
REMARKS
DIST. TRANSFORMERS UP TO 2 MVA2. 1. 1 51-TMSS-01Applicable Standards:
Saudi Arabia-RIYADH YesABB
Saudi Arabia-RIYADH Yes Based on TS&SD letter # 11-03272-03032301 dated16/11/2011, it is prequalified for Station Service Transformer upto 1.5MVA only as confirming to SEC specification #
51-TMSS-01, Rev.0 with the following conditions:
The following Special Tests as per SECspecifications/standards for Station Service Transformer shall be
conducted on the first batch to be supplied to SEC in case ofcontract award or SEC direct purchase order in SEC approvedindependent laboratory, in presence of three (3) SEC Engineers
and one (1) SEC approved independent inspection agency. Allthe related costs for witnessing of the tests will be borne by themanufacturer:
1. Off-circuit tap changers.2. Determination of capacitance winding to earth and betweenwindings.
3. Determination of transient voltage characteristics.4. Measurement of zero sequence impedance.5. Measurement of the harmonics of the no load current.
6. Measurement of D.C insulation resistance to earth of thewindings (Polarization Index and core).7. Measurement of dissipation factor (Tan Delta) of theinsulation capacitance.
8. Determination of sound levels.
This was confirmed by ALFANAR Electrical Systems(AES)Riyadh through letter # Nil dated 13/03/2011.
Ten (10) years extended warranty from the date of PAC of
the turnkey project in case of contract award or date of deliveryin case of direct material supply order. This was confirmed byALFANAR Electrical Systems (AES)Riyadh through letter # Nildated 09/04/2011.
ALFANAR ELECTRICAL SYSTEMS
United Arab Emirates-ABU DHABI Yes UP TO 1.5 MVA FEDERAL TRANSFORMERS CO.
Croatia/Hrvatska Yes UP TO 2.5 MVA. Complete Type, Routine / Sample tests for first
order & 10 Years Warranty from the date of PAC is required.
KONCAR D&ST
Saudi Arabia-DAMMAM Yes UP TO 13.8 KV ONLY SAUDI TRANSFORMERS CO.
Saudi Arabia-Riyadh YesUnited Transformers Electric Co. (UTEC)
Saudi Arabia-DAMMAM Yes UP TO 13.8 KV ONLY WESCOSA
Page 10 of 101
-
7/29/2019 Attachment 4 - Approved Manufacturers List
11/101
SERMETERIAL / EQUIPMENT
DESCRIPTION MANUFACTURER FACTORY LOCATIONPre-Qualified
ManufacturersBy SEC
REMARKS
7Total =
3 PAD MOUNTED GROUNDING TRANSFORMERS UP TO 2 MVA
13.8 KV, 33KV & 34.5 KV PRIMARY13 .
GROUNDING TRANSFORMERS3. 1. 1 52-TMSS-01Applicable Standards:
--- Yes ALL APPROVED POWER TRANSFOREMER MANUFACTURERS,EXCEPT DISTRIBUTION TRANSFORMER MANUFACTURERS ARE
ALSO ACCEPTABLE FOR GROUNDING TRANSFORMERS
*
United States YesABB
Saudi Arabia-RIYADH YesABB
ITALY YesABB ( T& D)
SWITZERLAND-GENEVA YesABB SECHERON
BELGIUM YesCG POWER SYSTEMS
INDIA Yes SUSPENDED FOR SEC 2005 PROJECTS AND ONWARDCROMPTON GREAVES
KOREA, Republic of-Changwon YesHYOSUNG (HICO)
KOREA, Republic of-Ulsan YesHYUNDAI
9Total =
4 DRY TYPE TRANSFORMERS
36 KV PRIMARY14 .
36 KV PRIMARY4. 1. 0 Applicable Standards:
Saudi Arabia YesABB/AEIL
GERMANY YesSIEMENS
Saudi Arabia-DAMMAM YesWESCOSA
3Total =
5 COMPACT SUBSTATION
69KV PRIMARY, 13.8 KV OR 34.5 KV SECONDARY15 .
UNIT SUBSTATION, 69KV PRIMARY, 13.8 KV OR 34.5 KV SECONDARY5. 1. 1 Applicable Standards:
SWITZERLAND-GENEVA YesABB (BBC SECHERON)
Page 11 of 101
-
7/29/2019 Attachment 4 - Approved Manufacturers List
12/101
SERMETERIAL / EQUIPMENT
DESCRIPTION MANUFACTURER FACTORY LOCATIONPre-Qualified
ManufacturersBy SEC
REMARKS
BELGIUM YesCG POWER SYSTEMS
2Total =
110-132 KV PRIMARY, 13.8 KV OR 34.5 KV SECONDARY25 .
UNIT SUBSTATION, 110 - 132 KV PRIMARY, 13.8 KV OR 34.5 KV SECONDARY5. 2. 1 Applicable Standards:
United States-N/A YesABB ( T& D)
1Total =
6 REACTOR
OIL IMMERSED REACTORS16 .
33 KV TO 69 KV OIL IMMERSED REACTORS6. 1. 1 58-TMSS-01Applicable Standards:
SWEDEN YesABB
TURKEY YesAREVA
FRANCE-(ST. QUEN) YesAREVA_(ST. QUEN)
KOREA, Republic of-Ulsan Yes Based on TS&SD Letter # 10-02438-02-03032301 dated31/08/2010, it is pre-qualified for Shunt Reactor as confirming toSEC specification # 58-TMSS-01, Rev.0 with the following
conditions:
All type/special, routine& sample tests for Shunt Reactorson one unit of each rating supplied to SEC shall be conducted at
Manufacturer's Testing Laboratory in the presence of three (3)SEC engineers & one (1) SEC approved independent inspectionagency Inspector, all the related costs for witnessing the tests
will be borne by the manufacturer. This was confirmed by HHIKorea through letter # S370-1007-052 dated 05/07/2010.
Ten (10) years extended warranty for the proposed Shunt
Reactors from the date of PAC of the turnkey project in case of
contract award or date of delivery in case of direct materialsupply order. This was confirmed by HHI Korea through letter
# S370-1008-0182 dated 18/08/2010.
HYUNDAI
JAPAN YesJAPAN AE POWER SYSTEMS CORP.
JAPAN-- Yes ORIGINALLY TMT&D CORP. & DISSOLVED DURING APRIL 2005.MITSUBISHI
GERMANY-NURNBERG YesSIEMENS AG (NURNBERG)
AUSTRIA- WEIZ YesSIEMENS TRANSFORMERS AUSTRIA GMBH &CO KG
Page 12 of 101
-
7/29/2019 Attachment 4 - Approved Manufacturers List
13/101
SERMETERIAL / EQUIPMENT
DESCRIPTION MANUFACTURER FACTORY LOCATIONPre-Qualified
ManufacturersBy SEC
REMARKS
JAPAN-- Yes ORIGINALLY TMT&D CORP. & DISSOLVED DURING APRIL 2005.TOSHIBA CORPORATION, T&D
9Total =
110 KV TO 132 KV REACTORS6. 1. 2 58-TMSS-01Applicable Standards:
SWEDEN YesABB
United States-N/A YesABB ( T& D)
TURKEY YesAREVA
FRANCE-(ST. QUEN) YesAREVA_(ST. QUEN)
KOREA, Republic of-Ulsan Yes Based on TS&SD Letter # 10-02438-02-03032301 dated31/08/2010, it is pre-qualified for Shunt Reactor as confirming toSEC specification # 58-TMSS-01, Rev.0 with the following
conditions:
All type/special, routine& sample tests for Shunt Reactorson one unit of each rating supplied to SEC shall be conducted at
Manufacturer's Testing Laboratory in the presence of three (3)SEC engineers & one (1) SEC approved independent inspectionagency Inspector, all the related costs for witnessing the tests
will be borne by the manufacturer. This was confirmed by HHIKorea through letter # S370-1007-052 dated 05/07/2010.
Ten (10) years extended warranty for the proposed Shunt
Reactors from the date of PAC of the turnkey project in case ofcontract award or date of delivery in case of direct materialsupply order. This was confirmed by HHI Korea through letter
# S370-1008-0182 dated 18/08/2010.
HYUNDAI
JAPAN YesJAPAN AE POWER SYSTEMS CORP.
JAPAN-- Yes ORIGINALLY TMT&D CORP. & DISSOLVED DURING APRIL 2005.MITSUBISHI
GERMANY-NURNBERG YesSIEMENS AG (NURNBERG)
AUSTRIA- WEIZ YesSIEMENS TRANSFORMERS AUSTRIA GMBH &CO KG
JAPAN-- Yes ORIGINALLY TMT&D CORP. & DISSOLVED DURING APRIL 2005.TOSHIBA CORPORATION, T&D
10Total =
230 KV OIL IMMERSED REACTORS6. 1. 3 58-TMSS-01Applicable Standards:
SWEDEN YesABB
United States-N/A YesABB ( T& D)
TURKEY YesAREVA
Page 13 of 101
-
7/29/2019 Attachment 4 - Approved Manufacturers List
14/101
SERMETERIAL / EQUIPMENT
DESCRIPTION MANUFACTURER FACTORY LOCATIONPre-Qualified
ManufacturersBy SEC
REMARKS
FRANCE-(ST. QUEN) YesAREVA_(ST. QUEN)
KOREA, Republic of-Ulsan Yes Based on TS&SD Letter # 10-02438-02-03032301 dated31/08/2010, it is pre-qualified for Shunt Reactor as confirming toSEC specification # 58-TMSS-01, Rev.0 with the followingconditions:
All type/special, routine& sample tests for Shunt Reactorson one unit of each rating supplied to SEC shall be conducted at
Manufacturer's Testing Laboratory in the presence of three (3)
SEC engineers & one (1) SEC approved independent inspectionagency Inspector, all the related costs for witnessing the testswill be borne by the manufacturer. This was confirmed by HHI
Korea through letter # S370-1007-052 dated 05/07/2010.
Ten (10) years extended warranty for the proposed Shunt
Reactors from the date of PAC of the turnkey project in case ofcontract award or date of delivery in case of direct materialsupply order. This was confirmed by HHI Korea through letter# S370-1008-0182 dated 18/08/2010.
HYUNDAI
JAPAN YesJAPAN AE POWER SYSTEMS CORP.
JAPAN-- Yes ORIGINALLY TMT&D CORP. & DISSOLVED DURING APRIL 2005.MITSUBISHI
GERMANY-NURNBERG YesSIEMENS AG (NURNBERG)
AUSTRIA- WEIZ YesSIEMENS TRANSFORMERS AUSTRIA GMBH &CO KG
JAPAN-- Yes ORIGINALLY TMT&D CORP. & DISSOLVED DURING APRIL 2005.TOSHIBA CORPORATION, T&D
10Total =
380 KV OIL IMMERSED REACTORS6. 1. 4 58-TMSS-01Applicable Standards:
SWEDEN YesABB
United States-N/A YesABB ( T& D)
FRANCE-(ST. QUEN) YesAREVA_(ST. QUEN)
Page 14 of 101
-
7/29/2019 Attachment 4 - Approved Manufacturers List
15/101
SERMETERIAL / EQUIPMENT
DESCRIPTION MANUFACTURER FACTORY LOCATIONPre-Qualified
ManufacturersBy SEC
REMARKS
KOREA, Republic of-Ulsan Yes Based on TS&SD Letter # 10-02438-02-03032301 dated31/08/2010, it is pre-qualified for Shunt Reactor as confirming toSEC specification # 58-TMSS-01, Rev.0 with the following
conditions:
All type/special, routine& sample tests for Shunt Reactorson one unit of each rating supplied to SEC shall be conducted at
Manufacturer's Testing Laboratory in the presence of three (3)SEC engineers & one (1) SEC approved independent inspectionagency Inspector, all the related costs for witnessing the tests
will be borne by the manufacturer. This was confirmed by HHIKorea through letter # S370-1007-052 dated 05/07/2010.
Ten (10) years extended warranty for the proposed Shunt
Reactors from the date of PAC of the turnkey project in case ofcontract award or date of delivery in case of direct materialsupply order. This was confirmed by HHI Korea through letter
# S370-1008-0182 dated 18/08/2010.
HYUNDAI
JAPAN YesJAPAN AE POWER SYSTEMS CORP.
JAPAN-- Yes ORIGINALLY TMT&D CORP. & DISSOLVED DURING APRIL 2005.MITSUBISHI
GERMANY-NURNBERG YesSIEMENS AG (NURNBERG)
AUSTRIA- WEIZ YesSIEMENS TRANSFORMERS AUSTRIA GMBH &CO KG
JAPAN-- Yes ORIGINALLY TMT&D CORP. & DISSOLVED DURING APRIL 2005.TOSHIBA CORPORATION, T&D
9Total =
AIR CORE SERIES REACTOR26 .
230 KV AIR CORE SERIES REACTORS6. 2. 1 58-TMSS-02Applicable Standards:
--- Yes ALL POWER TRANSFORMER AND OIL IMMERSED REACTOR MANUFACTURERS ARE ACCEPTABLE TO SUPPLY AIR CORESERIES REACTORS FROM 13.8KV TO 230 KV
*
Page 15 of 101
-
7/29/2019 Attachment 4 - Approved Manufacturers List
16/101
SERMETERIAL / EQUIPMENT
DESCRIPTION MANUFACTURER FACTORY LOCATIONPre-Qualified
ManufacturersBy SEC
REMARKS
AUSTRIA-Leonding, Linz Yes Based on TS&SD letter 10-01317-1-03032301 dated May 10,2010. TRENCH AUSTRIA GMBH is pre-qualified for Air CoreSeries Reactors as confirming to SEC Specification 58-TMSS-02,
Rev.0 with the following conditions: Extended Warranty: Seven (7) years Extended Warranty shallbe applicable for the Air Core Series Reactors to be supplied toSEC by TRENCH AUSTRIA GMBH as confirmed through their
letter # NIL dated April 28, 2010. Test Witnessing: Factory Tests on the first batch of Reactors tobe supplied to Contract # 10931162/00 and Contract #
10931163/00 for Dynamic Reactive Power CompensationProjects in Central Operating Area shall be conducted inpresence of three (3) SEC Engineers and one (1) IIA Inspector,under the sole expense of the Manufacturer as confirmed
through their Letter Letter # NIL dated April 28, 2010.
TRENCH AUSTRIA GMBH
CANADA-Scarborough, Ontar io Yes Based on TS&SD lette r 10-01317-1-03032301 dated May 10,2010. TRENCH CANADA is pre-qualified for Air Core SeriesReactors as confirming to SEC Specification 58-TMSS-02, Rev.0
with the following conditions: Extended Warranty: Seven (7) years Extended Warranty shallbe applicable for the Air Core Series Reactors to be supplied toSEC by TRENCH CANADA as confirmed through their letter # NIL
dated April 28, 2010. Test Witnessing: Factory Tests on the first batch of Air CoreSeries Reactors to be supplied to Contract # 20931030/00 for
Taif BSP & Kayber/Bawat S/S shall be conducted in presence ofthree (3) SEC Engineers and one (1) IIA Inspector, under thesole expense of the Manufacturer as confirmed through theirLetter # NIL dated April 27, 2010.
Free Replacement: TRENCH CANADA shall supply onecomplete three phase set of Reactors (3 units) to SEC (TaboukCity) free of charge as already confirmed through their letter #
NIL dated November 06, 2009.
TRENCH CANADA
3Total =
AIR CORE REACTORS36 .
230 KV AIR CORE REACTORS6. 3. 1 52-TMSS-02,58-TMSS-02Applicable Standards:
BELGIUM YesALSTOM (T & D) BALTEAU SA (NV)
Uni ted Arab Emira tes-Abu Dhabi Yes L imited to 34 .5kV Only; Fi rst uni t of 34 .5kV Ai r Core Reactorshall be type tested in an independent lab. in the presence of 3SEC Engineers & 1 SEC Approved Independent Inspection
Agency; 10 years of Extended Warranty.
Power Economy Middle East Co.
2Total =
Page 16 of 101
-
7/29/2019 Attachment 4 - Approved Manufacturers List
17/101
SERMETERIAL / EQUIPMENT
DESCRIPTION MANUFACTURER FACTORY LOCATIONPre-Qualified
ManufacturersBy SEC
REMARKS
7 SWITCHGEARS
METAL CLAD SWITCHGEARS17 .
13.8 KV UP TO 34.5 KV7. 1. 1 32-TMSS-01Applicable Standards:
United States-N/A YesABB ( T& D)
Saudi Arabia Yes For 33kV AIS:
classic ZS3 type with current rating up to 2500A@ 40oC; CBtype VD43620-25(2000A), VD43612-25(1250A & 800A); ES typeEK5, 3007N280.
For 13.8kV AIS: 13.8kV switchgear type UniGear ZS1 (CT on upper & lowerside of CB) with rated current of incomer, Bus Section, Bus Riser
3003A and 1756A, Out Going Feeder with rated current 924Aand 682A @ 40?C, 60Hz, 25kA (3s).
Out Going Feeder (CT on lower side of CB) with rated
current 991A and 648A @ 40?C, 60Hz, 25kA (3s).
CB types (VD4 embedded pole): VD4 17.31-25 (interrupter
G6), ABB Germany and VD4 17.16-25 (interrupter VG4/S), VD4
17.12-25 (interrupter VG4) & VD4 17.06-25 (interrupter VG4),ABB, Italy.
Circuit breaker for Capacitor bank back to back switching(BC2-630A); VD4 17.12-40 (interrupter VG6), HD4 17.12-25(interrupter SF6), HD4 24.12-25 (interrupter SF6), and (BC2-
900A); HD4 17.16-25 (interrupter SF6) ABB, Italy.
Earthing switch type EK6, ABB-EJF, Czech.
CT & VT: ABB-EJF, Czech or WTW make, Germany
Old version: Classic ZS1 .
ABB/AEIL
GERMANY-CALOR EMAG YesABB-CALOR EMAG
Saudi Arabia-JEDDAH Yes For 13.8kV AIS:type 8BK20 with CB type 3AH.for 33kV AIS:type 8BT2 is not acceptable, as the VT is situated in a separatecompartment and connected by cable.
AEL -SIEMENS
Page 17 of 101
-
7/29/2019 Attachment 4 - Approved Manufacturers List
18/101
SERMETERIAL / EQUIPMENT
DESCRIPTION MANUFACTURER FACTORY LOCATIONPre-Qualified
ManufacturersBy SEC
REMARKS
Saudi Arabia-RIYADH Yes Based on TS&SD letter# 09-02613-01-03032301 dated 13thSeptember 2009, ALFANAR ELECTRICAL SYSTEMS from SaudiArabia-Riyadh for 13.8kV Switchgear type NES-H with degree
protection IP4X; vacuum CB (rating 3150A & 1250A) and ESfrom LSIS (South Korea) - details of types are mentioned in theTS&SD letter; as confirming to SEC specification # 32-TMSS-01,rev.0 with the following condition:
Ten (10) years warranty from the date of PAC of theturnkey project in case of contract award or date of delivery incase of direct material supply order.
ALFANAR ELECTRICAL SYSTEMS
FRANCE-(MACON CEDEX 9) YesAREVA (MACON CEDEX 9)
PORTUGAL YesEFACEC
Poland-Konin Yes based on TS&SD letter# 09-01092-03032301 dated 18th. April2009 it is prequalified for for 13.8kV Air Insulated Switchgear
type D-17P with SCC of 25kA/3sec, degree of protection IP4Xand rated current of 3000A @ 40oC, 60Hz; CB type VD4 whichapproved by SEC from ABB-Germany (3000A) & ABB-Italy(2500A); ES type UMR from ELECTROBUDOWA SA-Poland as
confirming to SEC specification # 32-TMSS-01, rev.0 with Ten(10) years warranty from the date of PAC of the Turnkeyproject in case of contract award or date o f delivery in case of
direct material supply order.
ELEKTROBUDOWA SA
Saudi Arabia-RIYADH Yes For 13.8kV AIS:
Pre-qualified since 24/02/1420H for 13.8kV SWG type MC-Setwith CB type LF3-3150-(2500A), LF2- 2500 (2000A), LF2-1250(800A), LF2-630 (400A) and warranty of (7)years from
commissioning date of the first delivery for any onward projector order in the first two years and then shall be (3)years fromPAC.
for 33kV AIS:Based on TS&SD fax ref.#09-00073-2-03032301 dated04/02/2009. Pre-Qualified for 34.5 kV SWG type(F400NL)1250/2500 A @40C &60Hz with IP4X,SF6 CB type
SF2(France),ES type TFCM(France), & (10)years warranty.old version:33kV AIS type F400G with current rating up to 2500A @ 40oC
with CB type SF & SF2
EPS LTD. (GROUPE SCHNEIDER)
JAPAN YesJAPAN AE POWER SYSTEMS CORP.
Croatia/Hrvatska Yes LIMITED TO DTA ONLY; FOR CTA PREQUALIFICATION UNDER PROGRESS
KONCAR
JAPAN-- Yes ORIGINALLY TMT&D CORP. & DISSOLVED DURING APRIL 2005.MITSUBISHI
United States Yes SWITCHGEAR NOT YET TYPE TESTEDPOWER CON
United States YesS & C
United States YesSIEMENS
Page 18 of 101
METERIAL / EQUIPMENT P Q lifi d
-
7/29/2019 Attachment 4 - Approved Manufacturers List
19/101
SERMETERIAL / EQUIPMENT
DESCRIPTION MANUFACTURER FACTORY LOCATIONPre-Qualified
ManufacturersBy SEC
REMARKS
JAPAN-- Yes ORIGINALLY TMT&D CORP. & DISSOLVED DURING APRIL 2005.TOSHIBA CORPORATION, T&D
FRANCE YesVA TECH
Saudi Arabia-DAMMAM YesWESCOSA
18Total =
110 KV TO 132 KV GIS7. 1. 2 32-TMSS-02Applicable Standards:
GERMANY Yes Old Version:145kV GIS type ELK-04 with CB type ELK-SW04, Hydraulic
spring mechanism; DS type ELK-TE0 (3 POS), MES type ELK-TE0(3 POS)/ TE03-DR04; HES type ELK-EB03.
New Version:
Based on TS&SD letter # 11-00455-5-03032301 dated April 04,2011, the new version 145kV GIS type ELK-04 with CB typeELK-CB0 (Hydraulic Spring Mech. HMB-1), DS type
ELK-DE0-3POS, MES type ELK-DE0, HSES type ELK-ES0 (MotorSpring Mech.) is pre-qualified as conforming to SEC specification# 32-TMSS-02, Rev.01 with the following condition:Ten (10) Years Extended Guarantee/Warranty from the date of
PAC of project (in case of contract award) and from date ofdelivery for the direct material supply order. This was confirmed
in writing by ABB Germany via their letter # PTPH/GVS.Nb,10_year-warranty.doc dated May 14, 2010.
ABB
SWITZERLAND YesABB
FRANCE-(AIX-LES BAINS) Yes New version:
145kV GIS type B65 with CB type B65-CBMotor spring mechanism; DS type B65-DS; ES type B65-ES.Old version:
145kV GIS type B95 with CB type BHG 112, Moto r springmechanism; DS Bt212; ES type BE212
AREVA (AIX-LES BAINS)
SWITZERLAND-Oberentfelden Yes 145kV GIS type B65 with CB type B65-CBMotor spring mechanism; DS type B65-DS; ES type B65-ES; HEStype B65-EF.
AREVA T&D AG
KOREA, Republ ic of-Changwon Yes New Mode l approved on 10-04-2007, Model Type HSG-144A145KV GIS with CB type HCSP-144A
Motor spring mechanism; DS type HDMO-144A; MES typeHDMO-144A, HES type HEMS-144A.
All Type and Design tests have been carried out completely &accepted as mentioned in TS&SD letter#08-F02926-03032301dated 22/11/2008.
Provide extended Guarantee/Warranty for Seven(7) Years fromthe date of PACOld version: 145kV GIS type 145HGS40 with CB type145HCB,145PL40; DS type 145SDSV/SDSH; MES type 145SESM;
HES type 145SESA
HYOSUNG (HICO)
Page 19 of 101
METERIAL / EQUIPMENT Pre Qualified
-
7/29/2019 Attachment 4 - Approved Manufacturers List
20/101
SERMETERIAL / EQUIPMENT
DESCRIPTION MANUFACTURER FACTORY LOCATIONPre-Qualified
ManufacturersBy SEC
REMARKS
KOREA, Republic of-Ulsan Yes New version: 145kV GIS type 145SP-1 with CB type 145SP-K1Motor spring mechanism; BDS type 145SP-3PS1; LDS type145SP-3PS2; MES type 145-3PS2; HES type 145SP-LES2.
Old version: 145kV GIS type 145SP with CB type 145SP-KHydraulic mechanism; DS type 145SP-DS; MES type 145SP-ES;HES type 145SP-LES
HYUNDAI
JAPAN Yes New version: 145kV GIS type CFTA with CB type CFPT-120-40L,FAR3 Motor spring mechanism; DS type CFL-120; ES type
CFL-120.Old version: 145kV GIS type CFT with CB type CFPT-140-40L,FAR3,C Pneumatic mechanism; DS type SFL-EA; HES type
SFGM-FA.Old version:145kV GIS type SDA5 (SDA514) with CB type BAK5, Hydraulicmechanism.
JAPAN AE POWER SYSTEMS CORP.
Croatia/Hrvatska Yes GIS & ADAPTORS; LIMITED TO DTA ONLY; FOR CTA
PREQUALIFICATION UNDER PROGRESS
KONCAR
JAPAN-- Yes ORIGINALLY TMT&D CORP. & DISSOLVED DURING APRIL 2005.New version 145kV GIS type 100GMKD with CB type120-SFMT-40CJ; DS type 120GRD/GLD; MES type
120GRED/GRE; HES type 120 GRED/GRE-A.Old version: 145kV GIS 120GMKM with CB type 120-SFMT-40,Pneumatic mechanism; DS type 120-GR-20,
120-GL-20; MES type 120-GRE, 120-GREC; HES type 120-GREA.
Old version: 145kV GIS 100GMKD with CB type 120-SFMT-40CEMotor spring mechanism; DS type 120GLD; HES type 120-GREA.
MITSUBISHI
FRANCE-GRENOBLE Yes New version:145kV GIS type TH7m with CB type TH7m AF8ER(Motor spring);
BDS type CM002, CM003 (3-position); LDS type CM002, CM003(2-position); MES type CM002,CM003; HES type CM002, CM003.Old version: 145kV GIS type HEXABOLIC-TH7 with CB type
DTH7 Hydraulic mechanism; BDS type SITH7; LDS type ITH7, SITH7; ES type ST TH7.
SIEMENS
GERMANY Yes New version: 145kV GIS type 8DN8-II with CB type 8DN8 Motorspring mechanism; DS type 8DN8; ES type 8DN8.Old version: 145kV GIS type 8DN8 with CB type 8DN6(P1) Motor
spring mechanism; DS type 8DN8; ES type 8DN8.
SIEMENS
JAPAN-- Yes ORIGINALLY TMT&D CORP. & DISSOLVED DURING APRIL 2005.
145kV GIS type with CB type GSPK-145AP; BDS typeKTM-120PW, DTM-120PW, DLM-120PW; LDS type KTM-120PW,
DTM-120PW; MES type EBM-120W; HES type EAP-120W.
TOSHIBA CORPORATION, T&D
12Total =
230 KV -GIS7. 1. 3 32-TMSS-02Applicable Standards:
Page 20 of 101
METERIAL / EQUIPMENT Pre-Qualified
-
7/29/2019 Attachment 4 - Approved Manufacturers List
21/101
SERMETERIAL / EQUIPMENT
DESCRIPTION MANUFACTURER FACTORY LOCATIONPre-Qualified
ManufacturersBy SEC
REMARKS
SWITZERLAND Yes 230kV GIS type ELK SP2-1 with CB type ELK SP2-1; BDS typeELK-TE/ ELK-TW/ELK-TV; MES type ELK EM/ELK-EA; HES typeELK EB.
ABB
FRANCE-(AIX-LES BAINS) Yes 230kV GIS type T105 with CB type B105-CB; DS type CLTAREVA (AIX-LES BAINS)
JAPAN Yes 230kV GIS type MFPT MFPTB-300-63L with CB typeMFPTB-300-63LA, HAR/
MFTB-300-563L; BDS type FL-EA, LDS type FMG-FA/FG.
JAPAN AE POWER SYSTEMS CORP.
JAPAN-- Yes ORIGINALLY TMT&D CORP. & DISSOLVED DURING APRIL 2005.MITSUBISHI
GERMANY-Berlin Yes Old Version 230kV GIS type 8DN40-8DN4 with CB 8DN401-8DN4; BDStype 8DN4-8DQ1; LDS type 8DP4; MES type 8DN4; HES type8DP4.
Based on SIEMENS letter# 30179023-A1 dated02/05/2011, this type is already obsolete/phased out.
New VersionBased on TS&SD letter # 11-00267/01-03032301 dated02/02/2011, it is pre-qualified for 300kV GIS type 8DN9, rated
current 4000A, short time current rating of 63kA, CB (SingleBreak) type 8DN9-300-63-4000 with motor spring mechanism,Busbar & line DS type 8DN9-300-63-4000 with motor drive
mechanism, MES type 8DN9-300-63-with motor drive
mechanism & HES type 8DN9-300-63-4000 with motor drivemechanism as confirming to SEC specification #32-TMSS-02,Rev.01, with the following conditions:
Ten (10) years extended warranty starting from project"Safaniyah 380/230kV project" as confirmed through SIEMENS
letter # PQ_8DN9_02 dated 26/06/2010.
This GIS shall only be used for 245kV, 63kA applications.
SIEMENS
FRANCE-GRENOBLE YesSIEMENS
JAPAN-- Yes ORIGINALLY TMT&D CORP. & DISSOLVED DURING APRIL 2005.TOSHIBA CORPORATION, T&D
7Total =
380 KV - GIS7. 1. 432-TMSS-02Applicable Standards:
SWITZERLAND Yes 420kV GIS type ELK-03 with CB type ELKSP-3 DOUBLE BREAK,Spring Hydraulic Charged mechanism, BDS type ELKT, LDS typeELKT, MES type ELK EM3, MES type ELK EB3
ABB
FRANCE-(AIX-LES BAINS) Yes 420kV GIS type T155 with CB type FB2T (Hydrolic Mech.)AREVA (AIX-LES BAINS)
Page 21 of 101
METERIAL / EQUIPMENT Pre-Qualified
-
7/29/2019 Attachment 4 - Approved Manufacturers List
22/101
SERMETERIAL / EQUIPMENT
DESCRIPTION MANUFACTURER FACTORY LOCATIONPre Qualified
ManufacturersBy SEC
REMARKS
KOREA, Republ ic of-Changwon Yes Based on TS&SD lette r # 10-F-02299/02-03032301 dated25/10/2010, it is pre-qualified for 420kV GIS type HSG 426A,63kA, CB (Single Break) type HCHY 426A with Hydraulic
Mechanism, Busbar DS type HDMO 426A, Line DS type HDMO426B,ES type HEMO 426A&H-ES type HEMS 426A asconfirming to SEC specification # 32-TMSS-02,Rev.01, with thefollowing conditions:
Supply one complete spare bay" free of charge" (for notrepeating the short circuit test of circuit breaker type HCHY
426A) on the first supply of 420kV GIS type HSG 426A to SEC.This was confirmed in writing by Hyosung Corp (Korea) throughletter #Nil dated 28th December 2009.
Repeat/carry out the temperature rise test at 55?C (it wascarried out before at 50?C) of the main circuit on the first supplyof the 420kV GIS type HSG 426A to SEC. This was confirmed in
writing by Hyosung Corp (Korea) through letter #HS-420GIS-100830-1 dated 30th August 2010.
Back to back switching tests for the capacitor bank shall be
conducted in an independent test laboratory whenever there isproject requirement. This was confirmed in writing by HyosungCorp (Korea) through letter #HS-420GIS-100830-1 dated 30th
August 2010.
Ten (10) years extended warranty for the proposed 420kVGIS type HSG 426A from the date of PAC of the turnkey project
in case of contract award or date of delivery in case of directmaterial supply order. This was confirmed in writing by HyosungCorp (Korea) through letter #HS-420GIS-100830-1 dated 30th
August 2010.
HYOSUNG (HICO)
KOREA, Republic of-Ulsan Yes 420 kV; 63kA; TYPE-550 SR; CB-550 SR-K (Single Break);DS-550 DRM 1&2; ES-550 ERM; HES-550 LES; back to backcapacitor switching test for C.B. shall be done in independentlaboratory iin the presence of SEC Engineers whenever there is a
requirment for this test iin th PTS of forthcoming SEC projects.- 10 Years extended warranty.
HYUNDAI
JAPAN Yes 420kV GIS type 1FTJAPAN AE POWER SYSTEMS CORP.
JAPAN-- Yes ORIGINALLY TMT&D CORP. & DISSOLVED DURING APRIL 2005.MITSUBISHI
FRANCE-GRENOBLE Yes 420kV GIS type YGII with CB type SPD; DS ype YGIISIEMENS
United Kingdom-HEBBUM YesSIEMENS
Page 22 of 101
METERIAL / EQUIPMENT Pre-Qualified
-
7/29/2019 Attachment 4 - Approved Manufacturers List
23/101
SERMETERIAL / EQUIPMENT
DESCRIPTION MANUFACTURER FACTORY LOCATIONQ
ManufacturersBy SEC
REMARKS
GERMANY Yes New version: 550kV GIS typ 8DQ1 with CB type 8dQ1-P2; DStype 8DQ1; ES type 8DQ1. with ten (10) years extendedwarranty from the date o f Provisional Acceptance Certificate
(PAC) of the Turnkey project (In case of contract award) andfrom the date of delivery for the direct material supply order.The guarantee/warranty shall cover all the cost of materials andlabor as per warranty/guarantee of materials and workmanship
and subsequently reduced yearly in case of future project award.old version: 420kV GIS type 8DQ1 with CB type 8DQ1-T2,DOUBLE BREAK, Hydraulic mechanism; DS type 8QD1
SIEMENS
JAPAN-- Yes ORIGINALLY TMT&D CORP. & DISSOLVED DURING APRIL 2005.Old virsion: 420kV GIS type GID with CB type GSR400R2B/GSRK, DOUBLE BREAK, Hydraulic mechanism.
TOSHIBA CORPORATION, T&D
10Total =
33 KV GIS7. 1. 5 Applicable Standards:
GERMANY Yes Based on TS&SD Letter # 10-02461-02-03032301 dated31/08/2010, it is pre-qualified for 36kV GIS type 8DA10,ratedcurrent 2500A,short time current rating of 25kA(3sec) ,CB type
3AH with interrupter type VS 30040 (40kA) as confirming to SECspecification # 32-TMSS-03, Rev.0 with the following conditions:
Capacitor bank back to back switching tests in case of non
availability of test report shall be conducted in an independenttesting laboratory in the presence of three (3) SEC engineers &one (1) SEC approved independent inspection agency Inspector,
all the related costs for witnessing the tests will be borne by themanufacturer, in case there is a need of capacitor bankapplication. This was confirmed by Siemens through letter #8DA10_PQR_R1 dated 25/08/2010.
Seven (7) years extended warranty for the proposed 36kVGIS ,type 8DA10 from the date of PAC o f the turnkey project in
case of contract award or date of delivery in case of directmaterial supply order. This was confirmed by Siemens troughletter # 8DA10_PQR_R1 dated 25/08/2010.
SIEMENS
1Total =
8 BATTERY EQUIPMENT
BATTERY LEAD ACID18 .
BATTERY LEAD ACID8. 1. 0 46-TMSS-01Applicable Standards:
GERMANY YesBAE BERLINER BATTERIE FABRIK- G
Page 23 of 101
SERMETERIAL / EQUIPMENT
MANUFACTURER FACTORY LOCATIONPre-Qualified
REMARKS
-
7/29/2019 Attachment 4 - Approved Manufacturers List
24/101
SER/ Q
DESCRIPTION MANUFACTURER FACTORY LOCATION ManufacturersBy SEC
REMARKS
United States YesC & D
FRANCE YesCEAC
FRANCE-- Yes PREVIOUSLY KNOWN AS HAWKER S.A.R.L - FRANCE; FIVE
YEARS OF EXTENDED WARRANTY
ENERSYS S.A.R.L.
United States YesEXIDE
ITALY YesFIAMM
United States YesGOULD (GNB)
GERMANY YesHOPPECKE
SLOVENIA YesTOVARNA AKUMULATORSKIH BATERIJ
United Kingdom YesTUNGSTONE (HAWKER TUNGSTONE)
GERMANY YesVARTA
JAPAN YesYUASA
12Total =
BATTERY LEAD ACID, VALVE REGULATED LEAD ACID (VRLA)28 .
BATTERY LEAD ACID, VALVE REGULATED LEAD ACID (VRLA)8. 2. 0 46-TMSS-04Applicable Standards:
FRANCE-- Yes originally was SAFT Power System SAS-FranceAEG Power Solutions SAS
United States YesC & D
United Kingdom YesCHLORIDE (HAWKER CHLORIDE)
ITALY YesFIAMM
United States YesGNB
United Kingdom YesHAWKER LTD.
GERMANY YesHOPPECKE
GERMANY YesSAB
United States YesSEC
GERMANY YesVARTA
United States YesYUASA EXIDE
11Total =
BATTERY NICKEL CADMIUM (NiCD)38 .
BATTERY NICKEL CADMIUM (NiCD)8. 3. 0 46-TMSS-06Applicable Standards:
Page 24 of 101
SERMETERIAL / EQUIPMENT
MANUFACTURER FACTORY LOCATIONPre-Qualified
REMARKS
-
7/29/2019 Attachment 4 - Approved Manufacturers List
25/101
SER DESCRIPTION MANUFACTURER FACTORY LOCATION ManufacturersBy SEC
REMARKS
SWEDEN YesALCAD
FRANCE YesCHLORIDE
SPAIN YesEMISA
United States YesEXIDE
GERMANY Yes MERGED WITH SAFT NIFE -SWEDENFRIWO
GERMANY-Zwickau Yes Based on TS&SD fax ref.#08-F02675/03-03032301 dated10/01/2009. Pre-Qualified for Nicd Battery with this conditions:
-First batch shall be type tested in Independent Laboratory iinpresence of (3) SEC engineers & (1) independent inspector.-(07) years warranty
GAZ Gerate- und Akkumulatorenwerk ZwickauGmbH
United States YesGNB
SWEDEN Yes 370 TO 1390AHSAFT-NIFE
GERMANY YesVARTA HAWKER
9Total =
BATTERY CHARGER48 .
BATTERY CHARGER8. 4. 1 46-TMSS-02Applicable Standards:
FRANCE YesAEES
FRANCE-- Yes Originally was SAFT Power System SAS-FranceAEG Power Solutions SAS
FRANCE YesBENNING
GERMANY-- Yes Previously "Theo-Benning-Germany", the name has beenchanged to Benning Elektrotechnik & Elektronik GmbH & Co. KG-Germany based on TS&SD/ESD letter # 11-00334-03032301
dated 30/01/2011.
Benning Elektrotechnik & Elektronik GmbH &Co.kG.
United States YesC & D
ITALY-BIBIENA Yes Based on TS&SD letter# 09-F001363/02-03032301 dated 2nd.
May 2009 as confirming to SEC specifications # 46-TMSS-02,rev.0 ; with the following conditions: All tests shall be carried out on the first batch of Battery
Charger or UPS to be supplied to SEC in securing an order in themanufacturer's testing laboratory in the presence of three (3)SEC engineers & one (1) approved independent inspectionagency Inspector.
Ten (10) years warranty from the date of PAC of theturnkey project in case of contract award or date of delivery incase of direct material supply order.
CEG
FRANCE YesCHLORIDE
Page 25 of 101
SERMETERIAL / EQUIPMENT
SC O MANUFACTURER FACTORY LOCATIONPre-Qualified
M f t REMARKS
-
7/29/2019 Attachment 4 - Approved Manufacturers List
26/101
SER DESCRIPTION MANUFACTURER FACTORY LOCATION ManufacturersBy SEC
REMARKS
SPAIN YesEMISA (ELECTRO MERCANTIL INDUSTRIALS.A. SPAIN)
United Kingdom YesERSKINE
United States YesEXIDE
SWITZERLAND YesGUTOR ELECTRONIC LTD.
11Total =
UPS, 5 THROUGH 100KVA8. 4. 2 46-TMSS-03Applicable Standards:
ITALY-BIBIENA Yes Based on TS&SD letter# 09-F001363/02-03032301 dated 2nd.
May 2009 as confirming to SEC specifications # 46-TMSS-03,rev.0 ; with the following conditions: All tests shall be carried out on the first batch of BatteryCharger or UPS to be supplied to SEC in securing an order in the
manufacturer's testing laboratory in the presence of three (3)SEC engineers & one (1) approved independent inspectionagency Inspector.
Ten (10) years warranty from the date of PAC of theturnkey project in case of contract award or date of delivery incase of direct material supply order.
CEG
SWITZERLAND YesGUTOR ELECTRONIC LTD.
2Total =
BATTERY CHARGER, 48 VDC8. 4. 3 46-TMSS-02,46-TMSS-05Applicable Standards:
FRANCE Yes ACCEPTABLE FOR APPLICATIONS OTHER THAN TELECOMAEES
FRANCE-- Yes originally was SAFT Power System SAS-FranceAEG Power Solutions SAS
FRANCE YesBENNING
ITALY Yes FOR TELECOM APPLICATIONSBRAGA MORO
FRANCE YesCHLORIDE
AUSTRALIA-ALPHA Yes SWITCH MODE RECTIFIERS / BATTERY CHARGERS ONLY FORTELECOM APPLICATION.
COM 10 INTERNATIONAL PTY. LTD.
SPAIN YesEMISA (ELECTRO MERCANTIL INDUSTRIALS.A. SPAIN)
Page 26 of 101
SERMETERIAL / EQUIPMENT
DESCRIPTION MANUFACTURER FACTORY LOCATIONPre-Qualified
Manufacturers REMARKS
-
7/29/2019 Attachment 4 - Approved Manufacturers List
27/101
SER DESCRIPTION MANUFACTURER FACTORY LOCATION ManufacturersBy SEC
REMARKS
United Kingdom Yes Based on TS&SD letter# 09-F02210/03-03032301 dated 1st .September 2009, ERSKIN System Ltd. (a division of Dale PowerSolution plc) from United Kingdom-Scarborough for 48V DC
battery Charger as confirming to SEC specification #46-TMSS-05, rev.0 with the following conditions: All type, design, special & routine tests as per SECspecifications/standards shall be carried out on the first batch to
be supplied to SEC in securing an o rder in the manufacturer'slaboratory in the presence of three (3) SEC engineers & one (1)approved independent inspection agency Inspector.
Ten (10) years warranty from the date of PAC of theturnkey project in case of contract award or date of delivery incase of direct material supply order.
ERSKINE
United States Yes SCR TYPE ONLY EXIDE
United Kingdom Yes .HAMMER & SIMMONS
United States Yes SWITCH MODE RECTIFIERS ONLY FOR TELECOMAPPLICATIONS
T.D.I
11Total =
9 LV DISTRIBUTION PANELS
AC & DC DIST. PANELS19 .
AC & DC DIST. PANELS9. 1. 0 31-TMSS-02Applicable Standards:
Saudi Arabia YesABB/AEIL
Saudi Arabia-RIYADH YesALFANAR ELECTRICAL SYSTEMS
Saudi Arabia-DAMMAM YesEAST & WEST FACTORY
Saudi Arabia-DAMMAM YesELECTRICAL PANEL BOARD FACTORY/HAWATRADING
Saudi Arabia-RIYADH YesEPS LTD. (GROUPE SCHNEIDER)
United Arab Emirates-DUBAI Yes Ten (10) years warranty from the date of PAC of the
turnkey project in case of contract award or date of delivery incase of direct material supply order.
ETA-PCS
Page 27 of 101
SERMETERIAL / EQUIPMENT
DESCRIPTION MANUFACTURER FACTORY LOCATIONPre-Qualified
Manufacturers REMARKS
-
7/29/2019 Attachment 4 - Approved Manufacturers List
28/101
SER DESCRIPTION MANUFACTURER FACTORY LOCATION ManufacturersBy SEC
REMARKS
Saudi Arabia-Riyadh Yes Based on TS&SD letter #11-F03210/01-03032301 dated29/11/2011, it is pre-qualified for AC&DC Panels as confirming toSEC specification # 31-TMSS-02, Rev.0 with the following
conditions:
All type, special, routine and sample tests as per SECspecifications/standards shall be carried out on the first batch of
AC&DC Panels to be supplied to SEC in case of securing an orderin the presence of three (3) SEC Engineers & one (1) approvedindependent inspection agency Inspector in an independent
testing laboratory. All the related costs for witnessing the testswill be borne by the manufacturer. This was confirmed byMEMF-ETA Switchgear Manufacturing Company through letter #Nil dated 14/02/2011.
Ten (10) years extended warranty from the date of PAC ofthe turnkey project in case of contract award or date of delivery
in case of direct material supply order. This was confirmed byMEMF-ETA Switchgear Manufacturing Company through letter #Nil dated 08/12/2010.
MEMF-ETA Switchgear Manufacturing Company
Saudi Arabia-RIYADH YesMOHAMMAD AL OJAIMI FACTORY
Saudi Arabia-RIYADH YesMUSAID SWITCHGEAR
Saudi Arabia-DAMMAM YesREMAL
Saudi Arabia-JEDDAH YesSIEMENSSaudi Arabia-Dammam Yes Based on TS&SD Letter # 11-01751/01-03032301 dated
27/06/2011, it is pre-qualified for Auxiliary AC & DC Panels up to132kV only as confirming to SEC specification # 31-TMSS-02,Rev.0 with the following conditions:
All type, special, routine and sample tests as per SECspecifications/standards shall be carried out on the first batch of
each type of Auxiliary AC&DC Panels to be supplied to SEC incase of securing an order in the presence of three (3) SECengineers & one (1) approved independent inspection agencyInspector in an independent testing laboratory. All the related
costs for witnessing the tests will be borne by the manufacturer.This was confirmed by WESCOSA-Dammam through letter # Nildated 18/05/2010.
Ten (10) years extended warranty from the date of PAC of theturnkey project in case of contract award or date of delivery incase of direct material supply order. This was confirmed by
WESCOSA-Dammam through letter # Nil dated 30/08/2010.
Waha Electric Supply Co. of Saudi Arabia-(WESCOSA)-Dammam
12Total =
10 LOAD BREAK SWITCHES UPTO 34.5 KV & RING MAIN UNITS, 15 KV
Page 28 of 101
SERMETERIAL / EQUIPMENT
DESCRIPTION MANUFACTURER FACTORY LOCATIONPre-Qualified
Manufacturers REMARKS
-
7/29/2019 Attachment 4 - Approved Manufacturers List
29/101
DESCRIPTION ManufacturersBy SEC
LOAD BREAK SWITCHES UPTO 34.5 KV110 .
LOAD BREAK SWITCHES UPTO 34.5 KV10. 1. 0 Applicable Standards:
Saudi Arabia YesABB/AEIL
FRANCE YesAREVA
Saudi Arabia-RIYADH YesEPS LTD. (GROUPE SCHNEIDER)
GERMANY YesFRITZ DRIESCHER
JAPAN YesHITACHI
Croatia/Hrvatska YesKONCAR
GERMANY YesSIEMENS
7Total =
RMU, 15 KV210 .
RMU, 15 KV10. 2. 0 32-TMSS-07Applicable Standards:
Saudi Arabia-RIYADH YesABB
FRANCE YesAREVA
Saudi Arabia-RIYADH YesEPS LTD. (GROUPE SCHNEIDER)
GERMANY YesFRITZ DRIESHER KG
Saudi Arabia-DAMMAM YesGULF REYROLLE LTD
FRANCE YesMERLIN GERIN
Saudi Arabia-AL KHOBAR YesSAUDI LUCY
GERMANY-FRANKFURT YesSIEMENS AG EVM
Saudi Arabia-DAMMAM YesTHE INTERNATIONAL ELECTRICAL PRODUCTSCO.
United Kingdom YesW. LUCY
10Total =
SPARE PARTS FOR RMU & EOS310 .
SPARE PARTS FOR RMU & EOS10. 3. 0 Applicable Standards:
BAHRAIN YesCELLMEC
Page 29 of 101
SERMETERIAL / EQUIPMENT
DESCRIPTION MANUFACTURER FACTORY LOCATIONPre-Qualified
Manufacturers REMARKS
-
7/29/2019 Attachment 4 - Approved Manufacturers List
30/101
DESCRIPTIONBy SEC
1Total =
11 NEUTRAL EARTHING RESISTORS UP TO 33 KV
NER, UP TO 33 KV111 .
NER, UP TO 33 KV11. 1. 0 57-TMSS-01Applicable Standards:
United Kingdom YesCRESSAL RESISTOR
United Kingdom YesFURSE
FRANCE-- Yes EXTENDED GUARANTEE / WARRANTY FOR 10 YEARSM.S.Resistances
FRANCE YesMETAL DEPLOYE
INDIA YesNATIONAL
5Total =
12 BARE CONDUCTORS
TYPE ACAR / ACSR / AAAC112 .
BARE CONDUCTOR, ACAR / ACSR / AAAC12. 1. 1 10-TMSS-01Applicable Standards:
United States YesALCOA
INDIA-NALAGARH Yes Based on TS&SD Letter # 10-01566-2-03032300 dated
14/06/2010, it is pre-qualified for Bar Conductors as confirmingto SEC specification # 10-TMSS-01, Rev.01 with the followingconditions:
The first batch of each type of conductors to be supplied toSEC shall be type tested in an independent accredited test
laboratory in the presence of three (3) SEC engineers & one (1)SEC approved independent inspection agency Inspector and allcost pertaining to the tests shall be borne by the manufacturer.This has been confirmed in writing by the manufacturer, through
letter # AIL/BRD/PQ/SEC/19 dated 22nd May 2010.
Ten (10) years warranty from the date of PAC of the
turnkey project in case of contract award or date of delivery incase of direct material supply order. This has been confirmed inwriting by the manufacturer; through letter # AIL/BRD/SEC/PQ/19 dated 22nd May 2010.
APAR Industries Ltd-NALAGARH
Page 30 of 101
SERMETERIAL / EQUIPMENT
DESCRIPTION MANUFACTURER FACTORY LOCATIONPre-Qualified
Manufacturers REMARKS
-
7/29/2019 Attachment 4 - Approved Manufacturers List
31/101
By SEC
INDIA-SILVASSA Yes Based on TS&SD Letter # 10-01566-2-03032300 dated14/06/2010, it is pre-qualified for Bar Conductors as confirmingto SEC specification # 10-TMSS-01, Rev.01
with the following conditions:
The first batch of each type of conductors to be supplied toSEC shall be type tested in an independent accredited test
laboratory in the presence of three (3) SEC engineers & one (1)SEC approved independent inspection agency Inspector and allcost pertaining to the tests shall be borne by the manufacturer.
This has been confirmed in writing by the manufacturer, throughletter # AIL/BRD/PQ/SEC/19 dated 22nd May 2010.
Ten (10) years warranty from the date of PAC of the
turnkey project in case of contract award or date of delivery incase of direct material supply order. This has been confirmed inwriting by the manufacturer; through letter # AIL/BRD/
SEC/PQ/19 dated 22nd May 2010.
APAR Industries Ltd-SILVASSA
BAHRAIN-MANAMA YesMIDAL CABLE LTD.
MUSCAT-- Yes FIRST LOT OF EACH TYPE SHALL BE TYPE TESTED IN AN
INDEPENDENT LABORATORY PER 10-TMSS-01 & OTHER INTL.STANDARDS, IN PRESENCE OF SEC ENGINEERS AND ALL COSTSHALL BE BORNE BY THE MANUFACTURER.10 YEARS
EXTENDED WARRANTY.
OMAN CABLE INDUSTRIES
Saudi Arabia-RIYADH YesRIYADH CABLESSaudi Arabia-JEDDAH YesSAUDI CABLE
United States YesSOUTHWIRE
INDIA-- Yes Based on TS&SD Letter # 10-F001691/01-03032301 dated19/06/2010, it is pre-qualified for Bare Conductors types (ACAR,
ACSR & AAAC) as confirming to SEC specification # 10-TMSS-01Rev.01 with the following conditions:
ACAR and ACSR conductors are successfully type tested inaccredited laboratory in presence of SEC Engineers withacceptable results.
For AAAC conductors, type, special, routine and sampletests shall be conducted on the first batch in an independentaccredited test laboratory in the presence of three (3) SEC
engineers & one (1) SEC approved independent inspectionagency Inspector and all cost pertaining to the tests shall beborne by the manufacturer.
Ten (10) years warranty from the date of PAC of theturnkey project in case of contract award or date of delivery incase of direct material supply order.
STERLITE (INDIA)
Page 31 of 101
SERMETERIAL / EQUIPMENT
DESCRIPTION MANUFACTURER FACTORY LOCATIONPre-Qualified
ManufacturersB SEC
REMARKS
-
7/29/2019 Attachment 4 - Approved Manufacturers List
32/101
By SEC
9Total =
TYPE ACSR/AW212 .
BARE CONDUCTOR, ACSR/AW12. 2. 1 10-TMSS-01Applicable Standards:
United States YesALCOA
INDIA-NALAGARH Yes Based on TS&SD Letter # 10-01566-2-03032300 dated
14/06/2010, it is pre-qualified for Bar Conductors as confirmingto SEC specification # 10-TMSS-01, Rev.01 with the followingconditions:
The first batch of each type of conductors to be supplied to
SEC shall be type tested in an independent accredited testlaboratory in the presence of three (3) SEC engineers & one (1)SEC approved independent inspection agency Inspector and all
cost pertaining to the tests shall be borne by the manufacturer.This has been confirmed in writing by the manufacturer, throughletter # AIL/BRD/PQ/SEC/19 dated 22nd May 2010.
Ten (10) years warranty from the date of PAC of theturnkey project in case of contract award or date of delivery incase of direct material supply order. This has been confirmed in
writing by the manufacturer; through letter # AIL/BRD/SEC/PQ/19 dated 22nd May 2010.
APAR Industries Ltd-NALAGARH
INDIA-SILVASSA Yes Based on TS&SD Letter # 10-01566-2-03032300 dated14/06/2010, it is pre-qualified for Bar Conductors as confirmingto SEC specification # 10-TMSS-01, Rev.01 with the following
conditions:
The first batch of each type of conductors to be supplied to
SEC shall be type tested in an independent accredited testlaboratory in the presence of three (3) SEC engineers & one (1)SEC approved independent inspection agency Inspector and allcost pertaining to the tests shall be borne by the manufacturer.
This has been confirmed in writing by the manufacturer, throughletter # AIL/BRD/PQ/SEC/19 dated 22nd May 2010.
Ten (10) years warranty from the date of PAC of theturnkey project in case of contract award or date of delivery incase of direct material supply order. This has been confirmed inwriting by the manufacturer; through letter # AIL/BRD/
SEC/PQ/19 dated 22nd May 2010.
APAR Industries Ltd-SILVASSA
Saudi Arabia-JEDDAH YesJEDDAH CABLE CO.
BAHRAIN-MANAMA YesMIDAL CABLE LTD.
Page 32 of 101
SERMETERIAL / EQUIPMENT
DESCRIPTION MANUFACTURER FACTORY LOCATIONPre-Qualified
ManufacturersBy SEC
REMARKS
-
7/29/2019 Attachment 4 - Approved Manufacturers List
33/101
By SEC
MUSCAT-- Yes FIRST LOT OF EACH TYPE SHALL BE TYPE TESTED IN ANINDEPENDENT LABORATORY PER 10-TMSS-01 & OTHER INTL.STANDARDS, IN PRESENCE OF SEC ENGINEERS AND ALL COST
SHALL BE BORNE BY THE MANUFACTURER.10 YEARSEXTENDED WARRANTY.
OMAN CABLE INDUSTRIES
Saudi Arabia-RIYADH YesRIYADH CABLES
Saudi Arabia-JEDDAH YesSAUDI CABLE
United States YesSOUTHWIRE
INDIA-- Yes Based on TS&SD Letter # 10-F001691/01-03032301 dated19/06/2010, it is pre-qualified for Bare Conductors type(ACSR/AW) as confirming to SEC specification # 10-TMSS-01Rev.01 with the following condition:
Ten (10) years warranty from the date of PAC of theturnkey project in case of contract award or date of delivery incase of direct material supply order.
STERLITE (INDIA)
10Total =
GROUND WIRE312 .
GROUND WIRE12. 3. 1 10-TMSS-03Applicable Standards:
United States YesALCOA
INDIA-NALAGARH Yes Based on TS&SD Letter # 10-01566-2-03032300 dated14/06/2010, it is pre-qualified for Overhead Ground Wire (OGW)of Aluminum Clad Steel (ACS) Type only as confirming to SEC
specification # 10-TMSS-03, Rev.0 with the following conditions:
The first batch of Aluminum Clad Steel (ACS) type to besupplied to SEC shall be type tested in an independent
accredited test laboratory in the presence of three (3) SECengineers & one (1) SEC approved independent inspectionagency Inspector and all cost pertaining to the tests shall be
borne by the manufacturer. This has been confirmed in writingby the manufacturer through letter # AIL/BRD/PQ/SEC/19 dated22nd May 2010.
Ten (10) years warranty from the date of PAC of theturnkey project in case of contract award or date of delivery incase of direct material supply order. This has been confirmed in
writing by the manufacturer through letter # AIL/BRD/SEC/PQ/19 dated 22nd May 2010.
APAR Industries Ltd-NALAGARH
Page 33 of 101
SERMETERIAL / EQUIPMENT
DESCRIPTION MANUFACTURER FACTORY LOCATIONPre-Qualified
ManufacturersBy SEC
REMARKS
-
7/29/2019 Attachment 4 - Approved Manufacturers List
34/101
By SEC
INDIA-SILVASSA Yes Based on TS&SD Letter # 10-01566-2-03032300 dated14/06/2010, it is pre-qualified for Overhead Ground Wire (OGW)of Aluminum Clad Steel (ACS) Type only as confirming to SEC
specification # 10-TMSS-03, Rev.0 with the following conditions:
The first batch of Aluminum Clad Steel (ACS) type to besupplied to SEC shall be type tested in an independent
accredited test laboratory in the presence of three (3) SECengineers & one (1) SEC approved independent inspectionagency Inspector and all cost pertaining to the tests shall be
borne by the manufacturer. This has been confirmed in writingby the manufacturer through letter # AIL/BRD/PQ/SEC/19 dated22nd May 2010.
Ten (10) years warranty from the date of PAC of theturnkey project in case of contract award or date of delivery incase of direct material supply order. This has been confirmed in
writing by the manufacturer through letter # AIL/BRD/SEC/PQ/19 dated 22nd May 2010.
APAR Industries Ltd-SILVASSA
SPAIN YesECN CG SA
JAPAN YesJ-POWER SYSTEM CORP.
BAHRAIN-MANAMA YesMIDAL CABLE LTD.
Saudi Arabia-RIYADH YesRIYADH CABLES
Saudi Arabia-JEDDAH YesSAUDI CABLE
United States YesSOUTHWIRE
FRANCE YesTREFILEUROPE
10Total =
COPPER CLAD, STEEL GROUNDING CONDUCTOR & GROUNDING ROD412 .
COPPER CLAD STEEL GROUNDING CONDUCTOR AND GROUNDING ROD12. 4. 1 10-TMSS-05Applicable Standards:
United States-Statesvi lle, NC YesComScope Bimetals USA
United Kingdom-Nottingham Yes Including Exothermic Welding and Grounding connectors .FM Sudafix
Saudi Arabia YesFURSE
CHINA YesGANSEC SHENGYUEAN WIRE & CABLE CO.LTD.
SOUTH KOREA YesILJIN CORP./JIWOONG ELECTRIC CO.
United States YesLTV COPPERWELD
Saudi Arabia-JEDDAH YesSAUDI ELECTRIC INDUSTRIES CO. LTD.
Page 34 of 101
SERMETERIAL / EQUIPMENT
DESCRIPTION MANUFACTURER FACTORY LOCATIONPre-Qualified
ManufacturersBy SEC
REMARKS
-
7/29/2019 Attachment 4 - Approved Manufacturers List
35/101
By SEC
7Total =
COMPOSITE OPTICAL OH GROUND WIRE (OPGW)512 .
OPGW12. 5. 1 10-TMSS-04Applicable Standards:
United Kingdom-- Yes PREVIOUSLY ALCOA FUJIKURA LTD (AFL).AFL TELECOMMUNICATIONS EUROPE LTD
GERMANY-Monchengladbach Yes EXTENDED GUARANTEE/WARRANTY FOR A PERIOD OF 10YEARS.
Previously Draka Comteq Germany GmbH & KG.
AFL Telecommunications GmbH
SWITZERLAND YesBRUGG TELECOM AG
United Kingdom-PRESCOT YesCORNING CABLES (BICC)
FINLAND YesDRAKA NK
JAPAN YesFUJIKURA
JAPAN YesFURUKAWA ELECTRIC CO. LTD.
CHINA-Nantong Yes Based on TS&SD Letter # 10-01654-03032301 dated05/06/2010, it is pre-qualified for OPGW as confirming to SEC
specification # 10-TMSS-04, Rev.0 with the following conditions:
The first batch of each types of OPGW to be supplied toSEC shall be type tests in an independent testing laboratory inthe presence of three (3) SEC engineers & one (1) SEC approvedindependent inspection agency Inspector and all cost pertainingto the tests shall be borne by manufacturer .All type/design,
routine/sample and special tests per SEC material specificationnumber 10-TMSS-04, Rev.0 shall be conducted. This wasconfirmed in writing by the manufacturer through letter# Nil
dated 18th June 2009.
Ten (10) years warranty from the date of PAC of theturnkey project in case of contract award or date of delivery in
case of direct material supply order. This was confirmed inwriting by the manufacturer through letter # Nil dated 18th June2009.
Jiangsu Zhongtian Technology Co.Ltd (ZTT)-China
Page 35 of 101
SERMETERIAL / EQUIPMENT
DESCRIPTION MANUFACTURER FACTORY LOCATIONPre-Qualified
ManufacturersBy SEC
REMARKS
-
7/29/2019 Attachment 4 - Approved Manufacturers List
36/101
y
KOREA, Republic of Yes Based on TS&SD letter # 10-02583-03032301 dated19/09/2010, it is pre-qualified for OPGW as confirming to SECspecification # 10-TMSS-04,Rev.0, with the following conditions:
All type/design; routine/sample and special tests per SECmaterial specification # 10-TMSS-04, Rev.0 of first batch of eachtypes of OPGW to be supplied to SEC shall be conducted in an
independent testing laboratory in the presence of three (3) SECengineers & one (1) SEC approved independent inspectionagency Inspector and all cost pertaining to the tests shall be
borne by Manufacturer. This was confirmed in writing by themanufacturer through letter #Nil dated 24th December 2009.
Ten (10) years extended warranty for each types of OPGWfrom the date of PAC of the turnkey project in case of contractaward or date of delivery in case of direct material supply order.
This was confirmed in writing by the manufacturer through letter#Nil dated 24th December 2009.
LS CABLES
CANADA YesPHILLIPS FITEL
ITALY YesPIRELLI
SPAIN Yes PREVIOUSLY "PIRELLI"PRYSMIAN TELECOM
KOREA, Republic of Yes Based on TS&SD letter# 09-F00730/03-03032301 dated 24th
August 2009, Taihan Electric Wire Co. Ltd. from SouthKorea-Anyang for OPGW as confirming to SEC specification #10-TMSS-04, rev.0 with the following conditions:
All type, design, special & routine tests as per SECspecifications/standards shall be carried out on the first batch tobe supplied to SEC in securing an o rder in the manufacturer'slaboratory in the presence of three (3) SEC engineers & one (1)
approved independent inspection agency Inspector. Ten (10) years warranty from the date of PAC of theturnkey project in case of contract award or date of delivery in
case of direct material supply order.
TAIHAN ELECTRIC WIRE COMPANY
13Total =
HEAT RESISTANT ALUMINUM ALLOY CONDUCTOR612 .
HEAT RESISTANT ALUMINUM ALLOY CONDUCTOR12. 6. 1 10-TMSS-06Applicable Standards:
JAPAN Yes IT IS A CONSORTIUM OF FUJIKURA & FURUKAWA. ONLY INVAR CONDUCTORS PER CLAUSE 1.3 & 1.4 OF 10-TMSS-06. FIRST
LOT TO BE TYPE TESTED IN THE PRESENCE OF 3 SEC ENGRSAND IIA INSPECTOR; EXTENDED WARRANTY FOR 10 YEARS.
FUJIKURA VISCAS CORP
JAPAN Yes Based on TS&SD letter# 09-00649-1-03032301 dated 28 March2009 it is pre-qualified for GTACSR & GZTACSR.
J-POWER SYSTEM CORP.
Page 36 of 101
SERMETERIAL / EQUIPMENT
DESCRIPTION MANUFACTURER FACTORY LOCATIONPre-Qualified
ManufacturersBy SEC
REMARKS
-
7/29/2019 Attachment 4 - Approved Manufacturers List
37/101
KOREA, Republic of Yes Based on TS&SD letter # 10-02584-03032301 dated19/09/2010, it is pre-qualified for Heat Resistance AluminumAlloy Conductors, Gap& Non Gap type as confirming to SEC
specification # 10-TMSS-06,Rev.0, with the following conditions:
All type/design; routine/sample and special tests per SECmaterial specification # 10-TMSS-06, Rev.0 of first batch of each
types of Heat Resistance Aluminum Alloy Conductors to besupplied to SEC shall be conducted in an independent testinglaboratory in the presence of three (3) SEC engineers & one (1)
SEC approved independent inspection agency Inspector and allcost pertaining to the tests shall be borne by Manufacturer. Thiswas confirmed in writing by the manufacturer through letter #Nildated 08th January 2010.
Ten (10) years extended warranty for each types of HeatResistance Aluminum Alloy Conductors from the date of PAC of
the turnkey project in case of contract award or date of deliveryin case of direct material supply order. This was confirmed inwriting by the manufacturer through letter #Nil dated 08thJanuary 2010.
Full time presence of LS-Korea expert during execution of
first order with Gap type conductor for guidance and training ofSEC/Contractor staff about installation of this t ype of conductoras confirmed through LS letter # LS/LHJ-100526/00 dated 26thMay 2010.
Full technical support will be provided to SEC duringoperation of Gap Conductors for minimum five (5) years period
from first project as confirmed through LS letter # LS/LHJ-100526/00 dated 26th May 2010.
LS CABLES
3Total =
13 INSULATED CONDUCTOR CABLE (XLPE)
13.8 KV113 .
XLPE CABLE 13.8 KV13. 1. 1 Applicable Standards:
United Arab Emirates-DUBAI Yes Including Joints & TerminationsDUBAI CABLE CO.
EGYPT-- Yes Including Joints & TerminationsELSEWEDY EGYTECH CABLE CO.
Saudi Arabia-JEDDAH Yes Including Joints & TerminationsJEDDAH CABLE CO.
KOREA, Republic of Yes PREVIOUSLY LG; Including Joints & TerminationsLS
Page 37 of 101
SERMETERIAL / EQUIPMENT
DESCRIPTION MANUFACTURER FACTORY LOCATIONPre-Qualified
ManufacturersBy SEC
REMARKS
-
7/29/2019 Attachment 4 - Approved Manufacturers List
38/101
MUSCAT-- Yes Ref# is 08-02531/01-0303230 dated 08/11/2008no accessories are pre-qualified
OMAN CABLE INDUSTRIES
Saudi Arabia-RIYADH Yes Including Joints & TerminationsRIYADH CABLES
Saudi Arabia-JEDDAH Yes Including Joints & TerminationsSAUDI CABLE
KOREA, Republic of Yes Including Joints & TerminationsTAIHAN ELECTRIC WIRE COMPANY
8Total =
33 & 34.5 KV213 .
XLPE CABLE 33 & 34.5 KV13. 2. 1 Applicable Standards:
JAPAN Yes Including Joints & TerminationsDAINICHI-NIPPON CABLES (MITSUBISHI)
TURKEY-- Yes Including Joints & TerminationsDEMIRER KABLO/SAUDI CABLE CO.
United Arab Emirates-DUBAI Yes Including Joints & TerminationsDUBAI CABLE CO.
EGYPT-- Yes Including Joints & TerminationsELSEWEDY EGYTECH CABLE CO.
JAPAN Yes Including Joints & TerminationsFUJIKURA CABLES
Saudi Arabia-JEDDAH Yes Including Joints & TerminationsJEDDAH CABLE CO.
JAPAN Yes Including Joints & TerminationsJ-POWER SYSTEM CORP.
KOREA, Republic of Yes PREVIOUSLY LG; Including Joints & TerminationsLS
HUNGARY Yes Including Joints & TerminationsMKM
MUSCAT-- Yes Ref# is 08-02531/01-0303230 dated 08/11/2008no accessories are pre-qualified
OMAN CABLE INDUSTRIES
Saudi Arabia-RIYADH Yes Including Joints & TerminationsRIYADH CABLES
Saudi Arabia-JEDDAH Yes Including Joints & TerminationsSAUDI CABLE
JAPAN Yes Including Joints & TerminationsSHOWA CABLE
KOREA, Republic of Yes Including Joints & TerminationsTAIHAN ELECTRIC WIRE COMPANY
14Total =
LPE CABLES 69 KV313 .
XLPE CABLES 69 KV13. 3. 1 11-TMSS-01Applicable Standards:
FRANCE Yes Including Joints & TerminationsALCATEL
JAPAN Yes Including Joints & TerminationsDAINICHI-NIPPON CABLES (MITSUBISHI)
TURKEY-- Yes Including Joints & TerminationsDEMIRER KABLO/SAUDI CABLE CO.
Page 38 of 101
SERMETERIAL / EQUIPMENT
DESCRIPTION MANUFACTURER FACTORY LOCATIONPre-Qualified
ManufacturersBy SEC
REMARKS
FINLAND Y I l di J i t & T i tiDRAKA NK
-
7/29/2019 Attachment 4 - Approved Manufacturers List
39/101
FINLAND Yes Including Joints & TerminationsDRAKA NK
EGYPT-- Yes TO CARRY OUT ALL TYPE/DESIGN AND ROUTINE/SAMPLETESTS AT SEC APPROVED INDEPENDENT LABORATORY INPRESENCE OF A REPRESENTATIVE OF 3RD PARTY INSPECTIONAGENCY & THREE ENGINEERS OF SEC FOR FIRST CONTRACT;
10 YEARS OF EXTENDED GUARANTEE/WARRANTY; FOR JOINTS& TERMINATIONS ALSO;
ELSEWEDY EGYTECH CABLE CO.
JAPAN Yes Including Joints & TerminationsFUJIKURA CABLES
JAPAN Yes Including Joints & TerminationsFURUKAWA ELECTRIC CO. LTD.
Saudi Arabia-JEDDAH Yes Based on TS&SD letter # 10-02784-01-03032301 dated24/10/2010, it is pre-qualified for 69kV, 1x630mm XLPE PowerCable as confirming to SEC specification # 11-TMSS-01, Rev.0,
with the following condition:
Ten (10) years extended warranty for the proposed 69kV,1x630mm XLPE Power Cable from the date of PAC o f the
turnkey project in case of contract award or date of delivery incase of direct material supply order. This was confirmed inwriting by Jeddah Cable Co. through letter #Nil dated 26th June
2006.
JEDDAH CABLE CO.
JAPAN Yes Including Joints & TerminationsJ-POWER SYSTEM CORP.
HUNGARY Yes Including Joints & TerminationsMKM
NORWAY Yes Including Joints & TerminationsNEXANS NORWAY AS
GERMANY-BERLIN Yes Including Joints & TerminationsPIRELLI KABEL AND SYSTEM GMBH
Saudi Arabia-RIYADH Yes Including Joints & TerminationsRIYADH CABLES
Saudi Arabia-JEDDAH Yes Including Joints & TerminationsSAUDI CABLE
GERMANY-GERMANY Yes PREVIOUSLY ABB. Including Joints & TerminationsSUDKABEL
15Total =
110KV TO 132 KV413 .
XLPE CABLES 110 TO 132 KV13. 4. 1 11-TMSS-02Applicable Standards:
SWITZERLAND Yes Including Joints & TerminationsBRUGG
JAPAN Yes Including Joints & TerminationsDAINICHI-NIPPON CABLES (MITSUBISHI)
TURKEY-- Yes Including Joints & TerminationsDEMIRER KABLO/SAUDI CABLE CO.
FINLAND Yes Including Joints & TerminationsDRAKA NK
Page 39 of 101
SERMETERIAL / EQUIPMENT
DESCRIPTION MANUFACTURER FACTORY LOCATIONPre-Qualified
ManufacturersBy SEC
REMARKS
EGYPT Yes TO CARRY OUT ALL TYPE/DESIGN AND ROUTINE/SAMPLEELSEWEDY EGYTECH CABLE CO
-
7/29/2019 Attachment 4 - Approved Manufacturers List
40/101
EGYPT-- Yes TO CARRY OUT ALL TYPE/DESIGN AND ROUTINE/SAMPLETESTS AT SEC APPROVED INDEPENDENT LABORATORY INPRESENCE OF A REPRESENTATIVE OF 3RD PARTY INSPECTION
AGENCY & THREE ENGINEERS OF SEC FOR FIRST CONTRACT;10 YEARS OF EXTENDED GUARANTEE/WARRANTY; FOR JOINTS& TERMINATIONS ALSO;
ELSEWEDY EGYTECH CABLE CO.
JAPAN Yes Including Joints & TerminationsFUJIKURA
JAPAN Yes Including Joints & TerminationsFURUKAWA ELECTRIC CO. LTD.
Saudi Arabia-JEDDAH Yes Based on TS&SD letter # 10-02784-01-03032301 dated
24/10/2010, it is pre-qualified for 132kV, 1x1200mm XLPEPower Cable as confirming to SEC specification # 11-TMSS-02,
Rev.0, with the following condition:
Ten (10) years extended warranty for the proposed 132kV,
1x1200mm XLPE Power Cable from the date of PAC of theturnkey project in case of contract award or date of delivery incase of direct material supply order. This was confirmed inwriting by Jeddah Cable Co. through letter #Nil dated 26th June
2006.
JEDDAH CABLE CO.
JAPAN Yes Including Joints & TerminationsJ-POWER SYSTEM CORP.
KOREA, Republic of Yes PREVIOUSLY LG; Including Joints & TerminationsLS
NORWAY Yes Including Joints & TerminationsNEXANS NORWAY AS
GERMANY-BERLIN Yes Including Joints & TerminationsPIRELLI KABEL AND SYSTEM GMBHSaudi Arabia-RIYADH Yes Including Joints & TerminationsRIYADH CABLES
Saudi Arabia-JEDDAH Yes Including Joints & TerminationsSAUDI CABLE
GERMANY-GERMANY Yes PREVIOUSLY ABB. Including Joints & TerminationsSUDKABEL
KOREA, Republic of Yes Including Joints & TerminationsTAIHAN ELECTRIC WIRE COMPANY
16Total =
230 K V513 .
XLPE CABLE 230 K V13. 5. 1 11-TMSS-02Applicable Standards:
SWITZERLAND Yes Including Joints & Terminations; COMPLETE TYPE, SPECIAL & ROUTINE TESTS FOR THE FIRST ORDER , ALSO 10 YEARS
WARRANTY FROM THE DATE OF PAC ARE REQUIRED
BRUGG
JAPAN Yes Including Joints & TerminationsDAINICHI-NIPPON CABLES (MITSUBISHI)
TURKEY-- Yes Including Joints & TerminationsDEMIRER KABLO/SAUDI CABLE CO.
JAPAN Yes Including Joints & TerminationsFUJIKURA
JAPAN Yes Including Joints & TerminationsFURUKAWA ELECTRIC CO. LTD.
Page 40 of 101
SERMETERIAL / EQUIPMENT
DESCRIPTION MANUFACTURER FACTORY LOCATIONPre-Qualified
ManufacturersBy SEC
REMARKS
JAPAN Yes Including Joints & TerminationsJ-POWER SYSTEM CORP
-
7/29/2019 Attachment 4 - Approved Manufacturers List
41/101
JAPAN Yes Including Joints & TerminationsJ-POWER SYSTEM CORP.
KOREA, Republic of Yes PREVIOUSLY LG; Including Joints & Terminations. Ten (10) years extended warranty from the date of PAC of theFirst turnkey project in case of contract award or date o f the
First delivery in case of direct material supply order.
LS
NORWAY Yes Including Joints & TerminationsNEXANS NORWAY AS
GERMANY-BERLIN Yes Including Joints & TerminationsPIRELLI KABEL AND SYSTEM GMBH
Saudi Arabia-JEDDAH Yes based on TS&SD letter# 09-01366-03032301 da