atoms and molecules
DESCRIPTION
Learn about the basic building blocks of matter i.e. ATOMS. Based on Class 9 Syllabus.TRANSCRIPT
ATOMS AND MOLECULES
History of Atoms The idea of divisibility of matter was considered
long back in India, around 500 BC. An Indian philosopher Maharishi Kanad, postulated that if we go on dividing matter (padarth), we shall get smaller and smaller particles.
Pakudha Kaccayana, elaborated this doctrineand said that these particles normally exist in a combined form which gives us various forms of matter.Democritus and Leucippus
suggested that if we go on dividing matter, a stage will come when particles obtained cannot be divided further. Democritus called these indivisible particles atoms (meaning indivisible).
Democritus
Leucippus
Father of Modern Chemistry: Antoine L. Lavoiser
Antoine-Laurent de Lavoisier (26 August 1743 – 8 May1794)was a French nobleman and chemist central to the 18th-century Chemical Revolution and a large influence on both the histories of chemistry and biology. Antoine L. Lavoiser laid the foundation of chemical sciences by establishing two important laws of chemical combination.
Laws of Chemical Combinations
There are two laws of chemical combination.
Law of Conservation of MassLaw of Constant Proportions
Law of Conservation of Mass
Antoine L. Lavoisier, a French scientist, established the theory of Law of Conservation of Mass.
The law of conservation of mass states, “Mass can neither be created nor destroyed in a chemical reaction”.
Explanation of the Law:According to this law mass of an isolated
system will remain constant over time. This means when mass is enclosed in a system and none is allowed in or out, its quantity will never change. That is mass will be conserved, and hence this is called Law of Conservation of Mass. This means total mass of products is always equal to the total mass of reactants. As there is no loss of mass of substances, i.e. mass is conserved, that’s why Lavoisier called this the law of conservation of mass.
Reactants and Products:
In a chemical reaction The substances that combine or
react are known as reactants. The new substance/substances
formed are called product or products.
Example:When calcium oxide is dissolved in water
calcium hydroxide is formed. The reaction involved in this can be written as:
In this reaction calcium oxide and water are reactants while calcium hydroxide is product.
In this reaction 74 g of calcium hydroxide is obtained when 56 g of calcium oxide reacts with 18 g of water, which is proved by experiment.
Here the total mass of reactants, i.e. calcium oxide and water is equal to 74 g. And the mass of product, i.e. calcium hydroxide is also equal to 74g. This proves that the total mass of reactants is always equal to the total mass of product, which proves the Law of Conservation of Mass.
Law of Constant Proportions
Law of Constant Proportion states that a chemical compound always contains exactly the same proportion of elements by mass.
This law is also known as Law of definite proportions. Joseph Louis Proust gave this law hence, this law is also known as Proust’s Law.
Explanation of the lawCompounds are formed by the
combination of two or more elements. In a compound the ratio of the atoms or element by mass remains always same irrespective of the source of compound. This means a certain compound always formed by the combination of atoms in same ratio by mass. If the ratio of mass of constituent atoms will be altered the new compound is formed.
Examples:-
In a water molecule (H20) Hydrogen : Oxygen= 1:8In Ammonia ( NH3) Nitrogen : Oxygen = 14:3In Common Salt (NaCl) Sodium: Chlorine= 23: 35.5In Carbon dioxide (CO2) Carbon: Oxygen = 3:8In Calcium Oxide (CaO) Calcium: Oxygen= 5:2In Magnesium Sulphide (MgS) Magnesium: Sulphur = 3:4
John Dalton
John Dalton (6 September 1766 – 27 July 1844) was an English chemist, meteorologist and physicist. He is best known for his pioneering work in the development of modern atomic theory, and his research into colour blindness.
Dalton’s Atomic Theory
John Dalton, a British Chemists and scientists gave the Atomic Theory in 1808. This theory is popularly known as Dalton’s Atomic Theory in the honor of John Dalton. He gave the theory on the basis of Laws of Chemical Combination and explains them properly. In his theory he explains about atom.
Main postulates of Dalton's atomic theoryElements are made of extremely small
particles called atoms.Atoms of a given element are identical in size,
mass, and other properties;Atoms of different elements differ in size,
mass, and other properties.Atoms cannot be subdivided, created, or
destroyed.Atoms of different elements combine in simple
whole-number ratios to form chemical compounds.
In chemical reactions, atoms are combined, separated, or rearranged.
What is an Atom?Atom can be defined as the
smallest particle of matter that takes part in a chemical reaction.
How big are Atoms? Atoms are very small, they are
smaller than anything that we can imagine or compare with.
Characteristics of atoms:Atom is the smallest particle of matter.All elements are made of tiny particles called atom.Atoms are very small in size and cannot be seen
through naked eyes.Atom does not exist in free-state in nature. But
atom takes part in a chemical reaction.The properties of a matter depend upon the
characteristics of atoms.Atoms are the building block of an element similar
to a brick which combine together to make a building.
The size of atoms is indicated by its radius. In ancient time atoms was considered indivisible.
Symbols of Atoms of Different ElementsSymbols of some elements are formedfrom the first letter of the name and a
letter,appearing later in the name. E.g.: (i) chlorine: Cl, (ii) zinc: Zn etcSome have been taken from thenames of elements in Latin, German or
Greek.E.g.: s Iron is Fe from ferrum, Sodium is Na from natrium, Potassium is K from kalium
Atomic Mass
Mass of atom is called atomic mass. Since, atoms are very small consequently actual mass of an atom is very small. For example the actual mass of one atom of hydrogen is equal to 1.673 x 10-
24 g. This is equal to 0.000000000000000000000001673 gram. To deal with such small number is very difficult. Thus for convenience relative atomic mass is used.
Existence of Atoms
Atoms of most of the elements exist in the form of molecule or ion, since they are most reactive. For example, hydrogen, oxygen, chlorine, etc. However, atoms of some elements, which are non-reactive, exist in free-state in nature. For example helium, neon, argon, etc.
Usually atoms are exist in following two forms -
1. In the form of molecules2. In the form of ions
Molecule
A molecule is a group of two or more atoms that are chemically bonded together, that is, tightly held together by attractive forces.
Atomicity
Mono-atomic: When molecule is formed by single atom only, it is called mono-atomic molecule. Generally noble gases form mono-atomic molecules. For example: Helium (He), Neon (Ne),
Di-atomic: When molecule is formed by the combination of two atoms of it is called diatomic molecule. For example: Hydrogen (H2), Oxygen (O2), Nitrogen (N2), Chlorine (Cl2), etc.
Tri-atomic: When molecule is formed by the combination of three atoms it is called tri-atomic molecule. For example: molecule of ozone (O3)
Tetra-atomic:- When molecule is formed by the combination of four atoms it is called tetra-atomic molecule. For example: Phosphorous molecule (P4)
Polyatomic:- When molecule is formed by the combination of more than two atoms, it is called polyatomic molecule. For example: Sulphur molecule (S8)
All metals are mono-atomic. All gases are di-atomic.
Molecules of ElementsThe molecules of an element are
constituted by the same type of atoms. e.g.: O + O→ O2 (Oxygen Gas) ‘di-
atomic’ O + O + O→ O3 (Ozone) ‘tri-atomic’ 4P→ P4 (Phosphorous) ‘tetra-atomic’ 8S→ S8 (Sulphur) ‘poly-atomic’
Molecules of CompoundAtoms of different elements join together in
definite proportions to form molecules of compounds.
e.g.: Ca + O → CaO (Calcium Oxide) ‘di-atomic’
2H + O → H20 (Water) ‘tri-atomic’ N + 3H → NH3 (Ammonia) ‘tetra-atomic’ 2K + S + 4O → K2SO4 (Potassium
sulphate) ‘poly-
atomic’
IonsParticles carrying positive or negative
charges are called ions. Types of ions:1. Cations: Positively charged ions E.g.: Al3+,
Ca2+
2. Anions: Negatively charged ions E.g.: Cl−, Br−
All metals form cations by loosing electrons.All non-metals form anions by gaining
electrons.
Valencies of some elements
Chemical Formula
The chemical formula of a compound is a symbolic representation of its composition.
e.g.: H20 (Water), CaO (Calcium Oxide), NH3 (Ammonia) , K2SO4 (Potassium sulphate) etc.
Rules of writing chemical formulae • The valencies or charges on the ion must
balance. • When a compound consists of a metal and a
non-metal, the name or symbol of the metal is written first. For example:calcium oxide (CaO), sodium chloride (NaCl), iron sulphide (FeS), copper oxide (CuO) etc., where oxygen, chlorine, sulphur are non-metals and are written on the right, whereas calcium, sodium, iron and copper are metals, and are written on the left.
• In compounds formed with polyatomic ions, the ion is enclosed in a bracket before writing the number to indicate the ratio.
Formulae of CompoundsHydrogen chloride
Hydrogen Sulphide
Magnesium chloride
Calcium oxide
Ammonium Sulphate
Sodium carbonate
Calcium hydroxide
Sodium Nitrate
Mole ConceptOne mole of any species (atoms,
molecules, ions or particles) is that quantity in number having a mass equal to its atomic or molecular mass in grams.
1 mole (of anything) = 6.022×1023 in number
Mass of 1 mole of a particular substance is always fixed.
Avogadro’s NumberIt was named after the Italian
scientist named Amedeo Avagadro.
It is denoted by.
Its value is 6.022×1023
Ao is equal to 1 mole.
THANK YOU
Made By: Samyak Jain