atoll gsm umts lte acp
TRANSCRIPT
-
7/22/2019 Atoll Gsm Umts Lte Acp
1/37
Atoll ACP Module (GSM/UMTS/LTE)
3GPP Multi-RAT
Version 3.1.0
Confidential Do not share without prior permission
-
7/22/2019 Atoll Gsm Umts Lte Acp
2/37
2
New ACP module
New Concept of ACP implemented as an integrated Function of thePlanning Tool
Easy to use & administrate
One GUI for RF Planning & ACP
Common HW and system infrastructure
Common database
Automatic Optimisation of Network Parameters to increase Coverage and
Capacity
Site selection
Antenna selection & parameter optimisation (azimuth, height, mechanical & E tilt)Antenna Height
Power
-
7/22/2019 Atoll Gsm Umts Lte Acp
3/37
3
ACP Integration into Atoll
Fully integrated in the Atoll GUI and database
Additional data folder
Additional functional menus
-
7/22/2019 Atoll Gsm Umts Lte Acp
4/37
4
Product Availability
Based on an ACP Technology developed by Softwave WirelessJoint technology development with major European operator
Field Tested & Proven
Option to the Atoll UMTS GSM LTE modules
Combined GSM/UMTS/LTE optimisation
Also available for Atoll version 2.7 and 2.8
-
7/22/2019 Atoll Gsm Umts Lte Acp
5/37
5
Features
Pre defined Optimisation objectives
UMTS
Network coverage (RSCP)
Pilot interference (Ec/Io)
Pilot Pollution
Soft Handover
GSM
BCCH coverage
Cell Dominance
LTE
RS coverage (RSRP, RS C/N, Signal level..)
RS CINR (RSRQ...)
All technologies : Overlap threshold
User defined Optimisation objectivesFlexible interface
Allows Cross layer or Cross technology objectiveComplex objective definition (logical operation between objectives)
-
7/22/2019 Atoll Gsm Umts Lte Acp
6/37
6
Features
Through automatic adjustments of selected network parameters
Antenna parameters
Type Azimuth
Mechanical tilt and Electrical downtilt
Height
Transmit Power GSM Transmission power-
UMTSPilot Power-
LTEtotal power-
Site selection optimisation process
Candidate sites based on existing sites or station templates
User-driven optimisation process
Surface / traffic-based optimisationConvergence criteria
Usage of live network data
Tuned propagation models
Drive-test calibrated pathloss matrices Path loss matrices of Atoll project are used by Atoll ACP
-
7/22/2019 Atoll Gsm Umts Lte Acp
7/37
Optimisation Process with Atoll ACP
Confidential Do not share without prior permission
-
7/22/2019 Atoll Gsm Umts Lte Acp
8/378
Optimisation Setup -1-
Optimisation parameters
Radio layers to be optimised (UMTS, GSM900, GSM1800, LTE)User can activate/deactivate the radio layer to be used/optimized
Number of iteration (maximum number of potential changes )
Selection of Reconfiguration Area (cells within a specific geographical area, i.e.
focus zone)
Definition of Custom zones for objective/target (Hot Spot/ group of clutter class)
Radio Layers Zone definition
-
7/22/2019 Atoll Gsm Umts Lte Acp
9/379
Optimisation Setup -2-
Optimisation parameters
Cost control No Cost control (Optimisation only based on Quality)
Compromise between Quality and Cost (Parameter Change Cost, Site Visit Cost..)
Site class can be defined, with specific reconfiguration costs (friendly sites..)
Cost Control parameters
-
7/22/2019 Atoll Gsm Umts Lte Acp
10/3710
Optimisation Setup -3-
Reconfiguration
List of cells to be optimised (based on geographical area or cell list)Parameter modification defined per cell or per parameter (e.g. antenna group,
min/max downtilt angle)
Antenna azimuth with asymmetric values and/or minimum angle separation between sectors
Antenna height optimisation requires path loss calculation by ACP
Cell list selection for Reconfiguration
-
7/22/2019 Atoll Gsm Umts Lte Acp
11/3711
Optimisation Setup -4-
Reconfiguration
Parameter modification defined per cell (ie UMTS Pilot Power)Display on feature based on custom zones to select list of cell
Cell list can be exported/modified in Excel (ie Min/Max values, Use field)
and re-imported in ACP Setup
-
7/22/2019 Atoll Gsm Umts Lte Acp
12/3712
Optimisation Setup -5-
Physical antenna creation based on Antenna pattern
Dual band antenna (GSM/UMTS) with common E tilt
Antenna definition
Antenna patterns to create physical antennas for electrical tilt optimisation Automatic creation based on antenna pattern name or Atoll antenna table
Manual allocation is also possible
Radome creation with merge of physical antennas (Dual/Tri band antennas)
Antenna groups -group of radomes- for selection of best antenna type (within
group allocated to each sector)
Additional Electrical Tilt (AEDT) optimisation available
-
7/22/2019 Atoll Gsm Umts Lte Acp
13/3713
Optimisation Setup -6-
Objectives
Flexible Cost function allowing selection of optimisation criteria/constraintsList of objectives
Target zones for geographical areas
Weighting between objectives (RSCP Coverage vs EcIo)
Choice between Surface (Uniform traffic) or traffic based optimisation (Traffic Weighting)
All traffic maps defined in Atoll are supported
List of Pre -Defined objectives
Objective Criteria on EcIo
-
7/22/2019 Atoll Gsm Umts Lte Acp
14/37
Objective Condition
Weighting is considered in order to give more priority to selected zones Objective thresholds per zone (Computationdefault- , focus zone, custom zones)
14
Optimisation Setup -7-
Objective thresholds on EcIo
-
7/22/2019 Atoll Gsm Umts Lte Acp
15/37
Objective Target
% coverage on Target zone Optionally, filter on measurement points for Objective (i.e. consider only area for UMTS
Objective where GSM signal level is low)
15
Optimisation Setup -8-
-
7/22/2019 Atoll Gsm Umts Lte Acp
16/37
Specific Objectives (i.e. UMTS)
% coverage on Target zone Optionally, filter on measurement points for Objective (i.e. consider only area for UMTS
Objective where GSM signal level is low)
16
Optimisation Setup -9-
-
7/22/2019 Atoll Gsm Umts Lte Acp
17/3717
Optimisation Control
Key parameter evolution over time for objective
Coverage (RSCP, BCCH, LTE RS)
UMTS Ec/Io, LTE RS CINR...Cell Dominance
Graphical display in real time for
Quality
Variation per Radio layer
Each Objective Initial/Final plots (Success/fail area for target)
Number of changes per type
-
7/22/2019 Atoll Gsm Umts Lte Acp
18/3718
Optimisation Results
Network-level parameter report
Initial/Final statistics andimprovement per Objective
Statistics provided for :
Computation
Focus zones
Hot spot zones
Global report available in Excel
format
Reconfiguration Statistics
(Changes of parameterstilt,
azimuths, )
Graphical Analysis
Final/Initial plot comparison for
each ObjectiveHistograms provided for all
zones
Initial/Final plots for area where
target is reached.
-
7/22/2019 Atoll Gsm Umts Lte Acp
19/37
19
Implementation Plan Analysis
Improvement vs. ChangesGraphical analysis
Allows user to analyse global
improvement according to the
number of changes
Improvement also provided for
each objective
Coverage
3G Ec/Io, RS CINR...
Allows to build a modification
implementation
Changes can be ranked by
profitability (Change
Order)
Most profitable changes
will be applied first
Change number (order)
-
7/22/2019 Atoll Gsm Umts Lte Acp
20/37
20
Cell-level Analysis
ACP displays initial / final cell parameters
User-selectable modification list
User can commit modifications into Atoll or keep the results as an optimisation
scenario in the Atoll project
New settings can be analysed using the Monte-Carlo simulator and Atoll
prediction plots / analysis tools.
Commit Changes directly in transmitter/cell tablesRestore original values in database
-
7/22/2019 Atoll Gsm Umts Lte Acp
21/37
21
ACP Coverage plots
Output results availableQuality Analysis
RSCP, Ec/Io
BCCH Coverage...
Change Analysis
Type of change
Tilts, Azimuth, Power
Best server Analysis
Absolute values ofparameter changes(Tilt,
Azimuth...)
Objective Sector Analysis Improvement per cell
Objective Analysis
Success/Fail area
ACP map for Final electrical tilt values
-
7/22/2019 Atoll Gsm Umts Lte Acp
22/37
22
Optimisation Results (Example)
EcIo Coverage (Initial / Final)
Statistics available for RSCP Coverage
Statistical results for all zones
Initial /final coverage
Status map for RSCP Objective
Display area before and after optimisation
where target is reached or not (success/fail)
-
7/22/2019 Atoll Gsm Umts Lte Acp
23/37
Site Selection Process with Atoll ACP
(UMTS or LTE examples)
Confidential Do not share without prior permission
-
7/22/2019 Atoll Gsm Umts Lte Acp
24/37
24
Site Selection Process for UMTS- First Scenario
Site Selection between candidates for nominal site
Existing sites/sectors can be locked or removedSite status flag can be defined in site table as custom field
Definition of groups of candidates (minimum / maximum number of sites)
Cells can be optimised or not (reconfiguration for existing sites available
during site selection)
Group of candidates
-
7/22/2019 Atoll Gsm Umts Lte Acp
25/37
25
Optimisation Results / First Scenario
Statistics report
Site/sectors selected within each group (here 1 amongst 2)Existing sites were locked (kept)
Number of cells reconfigured (if reconfiguration mode selected)
Other statistics for zones (computation, focus or hot spots)
Implementation plan for site selected
with reconfiguration for existing sites
Statistics in term of number of sites
and coverage statistics for all zones
-
7/22/2019 Atoll Gsm Umts Lte Acp
26/37
26
Implementation in database / First Scenario
Commit Results in database
Quick evaluation thanks to ACP coverage plotsPredictions can be recalculated in Atoll project once changes are
committed in database
Example of prediction for final network configuration
Initial and Final coverage
with statistics on Hot spot zone
-
7/22/2019 Atoll Gsm Umts Lte Acp
27/37
27
Site Selection Process for UMTS Second Scenario
Deployment scenario with potential candidates, already defined in database
All 3G sites are supposed to be candidates (to be selected/activated)GSM sites :
are already existing, and share same antennas (E tilt not linked)
can be reconfigured during UMTS site selection
ACP to choose the optimal sites to fulfil objectives (RSCP, EcIo)
Minimum/maximum number of sites to consider within the area
Group of Candidate sitesExisting GSM sites
-
7/22/2019 Atoll Gsm Umts Lte Acp
28/37
28
Optimisation Results / Second Scenario
Statistics report
Total number of Site/sectors removed/added and selectedNumber of cells reconfigured (if reconfiguration mode selected)
Other statistics (RSCP, EcIo) for computation and focus zones
-
7/22/2019 Atoll Gsm Umts Lte Acp
29/37
29
Implementation Plan Analysis / Second Scenario
Improvement vs. Changes Graphical analysis
Sites or sectors added or removed to fulfil requirements (Objectives)
Changes of parameters (tilts) if reconfiguration mode selected
Site activated
-
7/22/2019 Atoll Gsm Umts Lte Acp
30/37
30
Cell-level Analysis / Second Scenario
Cell result table
Candidate sites to be de-activated/activated in database (UMTS)List of changes for candidates if reconfiguration mode selected
List of changes for GSM sites if reconfiguration activated for this layer
Cells reconfigured Cells selected/activated
-
7/22/2019 Atoll Gsm Umts Lte Acp
31/37
31
Site Selection Process for LTE Third Scenario-
Deployment scenario with potential candidates, either defined with their
coordinates in database or based on existing GSM/UMTS sites
Candidate site location (X/Y) for LTE can be :
Added in site table as location only
Imported as a list (text format) directly in ACP
Automatically created from location of existing GSM or UMTS sites
Reconfiguration of Station template parameters is user defined
Atoll ACP associates candidate location with Station template types, according to
geographical area (ie Urban/Rural station depending on area)
Common multi band antenna (UMTS/LTE) can be allocated to new LTE sites to
link sectors
-
7/22/2019 Atoll Gsm Umts Lte Acp
32/37
32
Optimisation Setup / Third Scenario
Principles of Site selection based on New candidates
ACP calculates path loss matrices of candidates at beginning of optimisationprocess (only once)
LTE Sites are always reconfigured when selected
Control of existing Layers (avoid degradation of quality)
Flexible settings
Zone Weighting (focus on specific area, ie dense urban)
Objectives weighting (RS Coverage vs RS CINR) Objectives per zone (Focus, Hot spot, group of clutter class..)
-
7/22/2019 Atoll Gsm Umts Lte Acp
33/37
33
Optimisation progress / Third Scenario
Graphical display for objectives, radio layers, change type
User can stop based on parameter evolution (% Coverage, number of sitesadded..)
Automatic stop when maximum number of iteration reached
LTE Coverage and CINR
evolution over time
GSM/UMTS sites upgraded to LTE
and new LTE site added,
with reconfiguration of existing sitesInitial and Final RS CINR Coverage showing
where target is reached or not
(Success/Fail for CINR threshold )
-
7/22/2019 Atoll Gsm Umts Lte Acp
34/37
34
Optimisation results / Third Scenario
Final implementation
List of LTE sites selected, with potential reconfiguration of default templateparameters (tilt...)
GSM and UMTS layer : list of changes for existing sites, with statistical results
for all zones
-
7/22/2019 Atoll Gsm Umts Lte Acp
35/37
35
Optimisation results / Third Scenario
Visual analyse with ACP plots and Atoll predictions
ACP results for planned LTE layer
ACP coverage plots displayed in map window
-
7/22/2019 Atoll Gsm Umts Lte Acp
36/37
36
ACP Summary and Benefits
New Concept of ACP implemented as an integrated function of the RF
Planning Tool
Optimised Design for Network in the Planning & Roll-Out phases
Optimisation of Live Networks
Integrated Planning/Optimisation Process & Workflow
-
7/22/2019 Atoll Gsm Umts Lte Acp
37/37
Thank You!