atm branding for financial institutions design
TRANSCRIPT
Arch
itect
ural
Exc
elle
nceATM Branding for Financial Institutions
Design, Fabrication, Installation, Management and Maintenance
Jody BuntingPresident
©2005-2011 Bunting Graphics, Inc. Part of the Bunting Group of Companies 20 River Road Verona, PA 15147 Tel 412.820.2200 www.buntinggraphics.com
ATM Branding Experts
Active Financial Industry Clients
Citizens Bank1 Citizens DriveRiverside, Rhode Island 02915
Fifth Third BankFifth Third Center38 Fountain Square PlazaCincinnati, Ohio 45263
First National Bank1 F.N.B. BoulevardHermitage, PA 16148
Fiserv255 Fiserv DriveBrookfield, Wisconsin 53045
PNC Bank (PNC Strategic Sourc-ing)U. S. Steel Tower600 Grant StreetPittsburgh, PA 15219
First Niagara Financial Group 6950 South Transit RoadLockport, NY 14095
Wells Fargo & Company 420 Montgomery StreetSan Francisco, CA 94104
Bunting Graphics provides custom ATM branding solutions
for financial institutions. Our breadth of capability and
broad experience with financial rebranding provides us
with the competitive tools to perform well in the ATM
channel. Our custom ATM branding solutions include:
• ATM Bezels, Enclosures and Surrounds
• Toppers and branding for stand-alone units
• ATM Kiosks and Islands
• Drive-Thru ATM Branding
Services:
• Design Assistance
• Professional Engineering Services
• Fabrication of custom branded elements
©2005-2011 Bunting Graphics, Inc. Part of the Bunting Group of Companies 20 River Road Verona, PA 15147 Tel 412.820.2200 www.buntinggraphics.com
Released to: Citizens BankDrawn by: Stephen JeszDate: 10.04.10Revision:
These documents are for design intent and shall be used only as a guide to produce the finished sizes, appearance and functions shown. Nothing contained in these documentsshall be construed as a design for any engineered element. The fabricator/contractor shall be responsible for all structural, electrical, mechanical and foundation engineering.These documents were not produced under an architectural services agreement. These drawings are part of an original unpublished design by Bunting Graphics, Inc. The detailingand information contained on theses pages shall not be reproduced, copied or utilized except for the specific for which they were created, without previous written authorized fromBunting Graphics, Inc. ATM Canopy
ATM_C1
OPTION: C1
ELEVATION3/8” = 1’ - 0”
SIDE VIEW3/8” = 1’ - 0”
Clearance 10’-3”
Bunting is a full solution provider of ATM branding.
ATM toppers are engineered and fabricated to fit the standard ATM models from Diebold and NCR. Illuminated or non-illuminated options are available.
ATM Toppers
©2005-2011 Bunting Graphics, Inc. Part of the Bunting Group of Companies 20 River Road Verona, PA 15147 Tel 412.820.2200 www.buntinggraphics.com
ATM Toppers
©2005-2011 Bunting Graphics, Inc. Part of the Bunting Group of Companies 20 River Road Verona, PA 15147 Tel 412.820.2200 www.buntinggraphics.com
ATM Toppers & Surrounds
©2005-2011 Bunting Graphics, Inc. Part of the Bunting Group of Companies 20 River Road Verona, PA 15147 Tel 412.820.2200 www.buntinggraphics.com
Project: Fifth Third Bank ATMDrawn by: Stephen JeszDate: 2.23.11Revision:Drawing File: 2012\2012 Leads\A003603 - FifthThird Bank ATM\Leads Briefcase\Signage Package\Drawings & Specs\Diebold Opteva 760_Option 1.ai
These documents are for design intent and shall be used only as a guide to produce the �nished sizes, appearance and functions shown. Nothing contained in these documentsshall be construed as a design for any engineered element. The fabricator/contractor shall be responsible for all structural, electrical, mechanical and foundation engineering.These documents were not produced under an architectural services agreement. These drawings are part of an original unpublished design by Bunting Graphics, Inc. The detailingand information contained on theses pages shall not be reproduced, copied or utilized except for the speci�c for which they were created, without previous written authorized fromBunting Graphics, Inc. Diebold Opteva 760
FIFTH THIRD BANK ATM MODEL
COLOR SPECIFICATIONS:APPLY OVER OPAQUE WHITE SUBSTRATEAPPLY OVER 274908-274909 WHITE EPOXY PRIMER
***
SAPPHIRE BLUE
SKY BLUE
VIVID GREEN
SILVER GREY
WHITE
----------
3M VINYL3632-8607180C-373632-80433632-8043*3632-1563632-156*3630-121180C-1203632-20108C-10
----------
MAP PAINTMP55619MP55619MP55609MP55609MP55605MP55605**MP55607MP55607MP18336MP18336
TranslucentOpaqueTranslucentOpaqueTranslucentOpaqueTranslucentOpaqueTranslucentOpaque
MODEL “760” ATM ELEVATION3/4” = 1’ - 0”
1-
SIDE VIEW3/4” = 1’ - 0”
2-
ATM
3’ - 9” 5”
T.B
.D.
MA
X 1
0’ -
0” W
ITH
OU
T S
EA
MS
FORMED, ALUMINUM FASCIA WITH RADIUS ENDS / WHITE IN GRAPHICS TO BE ILLUMINATED PUSH-THRU 1/4” FROM FACE
REVEAL
PANEL TO BE REMOVABLE WITH MECHANICAL
FASTENERS INSIDE REVEAL
3’ - 9”
5”
PLAN VIEW3/4” = 1’ - 0”
3-
Final Con�gurationStandalone ATM Unit
Final Con�gurationIn-Wall ATM Unit
Enlargement of PanelShowing 1. How patterns meet at corners2. Color and placement of grey ‘current’ art
Front Right Rear Left
Front Right
Front Panel Right Panel
24 Hour Banking 24 Hour Banking24 Hour Banking
24 Hour Banking 24 Hour Banking
24 Hour Banking
24 Hour Banking
Shee
tz AT
M Gr
aphi
c Wra
p
Sheetz ATM Topper Concept First Niagara Financial Group July 2009
Front View
Scale: 1” = 1’
Right View Back View Left View
ATM Branding
©2005-2011 Bunting Graphics, Inc. Part of the Bunting Group of Companies 20 River Road Verona, PA 15147 Tel 412.820.2200 www.buntinggraphics.com
ATM SurroundsBunting fabricated ATM surrounds for 4 Santander ATM models in sizes ranging from 84” to 117” in height.
The Santander ATM surrounds are fabricated from aluminum and painted with high quality automotive finish with push through acrylic graphics.
The surrounds are illuminated with high output T8 lamps with electronic ballasts for extended performance in cold weather environments.
The face is clad with Super Abrasion Resistant Acrylic with beveled polished edges.
©2005-2011 Bunting Graphics, Inc. Part of the Bunting Group of Companies 20 River Road Verona, PA 15147 Tel 412.820.2200 www.buntinggraphics.com
Architectural ExcellenceBunting Graphics is an architectural fabricator with a reputation for high quality fabrication. Our hand-crafted attention to quality and detail results in a level of precision noteworthy for our industry.
Bunting’s craftsmen operate out of 2 facilities boasting a total floor space capacity of 215,000 Sq.Ft. This square footage is on par with large commercial sign fabricators and is a necessary component for high volume throughput.
The difference maker for our clients is the finished product. The ability to throughput the highest grade of quality in large quantities is what helps to set us apart from our competition.
Bunting Graphics, Inc.20 River RoadVerona, PA 15147Tel: 412.820.2200Fax: 412.820.4404www.buntinggraphics.com