atlona at-hd-m2c hdmi multichannel to 2ch converter data sheet
TRANSCRIPT
Atlona HDMI Multichannel to 2CH Converter
AT-HD-M2C
atlona.com70 Daggett Road San Jose, CA 95134,tel: 1-877-536-3976, fax:408-743-5622, toll free: 1-877-536-3976©Atlona 2003-2013
The Atlona HDMI Multichannel to 2Ch Converter provides a solution for multiple audio formats. The AT-HD-M2C transmits its own multichannel EDID in place of any connected display’s EDID, to ensure when there are multiple displays the connected source sends the highest audio possible. Once the audio is received, it is down converted to 2Ch and sent through the HDMI, optical, or L/R ports, while still passing the video.
• Converts multichannel audio into 2 channel audio• Audio EDID - replaces the display’s 2 channel audio EDID with its own multichannel audio• (Digital) Coaxial / Optical outputs for older AVRs with no HDMI support• Supports pass through of up to 1080p or 1920x1200
• L/R audio output - for 2Ch amplifiers• Compatible with most lossy and lossless formats• LED audio status lights for all audio formats to determine incoming audio signals• Plug & Play• HDCP compliant
Atlona HDMI Multichannel to 2CH Converter
AT-HD-M2C
atlona.com70 Daggett Road San Jose, CA 94089,tel: 1-877-536-3976, fax:408-743-5622, toll free: 1-877-536-3976©Atlona 2003-2013
Dolby and the double-D symbol are registered trademarks of Dolby Laboratories.
DTS, DTS-HD, the Symbol, & DTS or DTS-HD and the Symbol together are registered trademarks of DTS, Inc. © DTS, Inc. All Rights Reserved.
Specifications
Audio
Total Harmonic Distortion 0.0025% (-92dB, sample frequency: 48Khz)
Signal/Noise Ration 106dB
Gain 0
Frequency Range 20Hz to 20Khz
HDMI In Signal uAudio Type Channels Audio Type Channels Audio Type Channels
PCM LPCMLPCM
25.17.1
Dolby® DigitalDolby® Digital PlusDolby® TrueHD
5.15.17.1
DTS Digital Surround™ DTS-HD Master Audio™
5.17.1
Output Signal uHDMI OpticalCoaxialAnalog (Left/Right)
PCMPCMPCMAnalog
2222
Bandwidth 6.75Gbps
PortsVideo/Audio inputVideo/Audio outputAudio output
Firmware updatePower
1 x HDMI1 x HDMI
1 x L/R Analog Audio1 x Optical Digital Audio1 x Coaxial Digital Audio
1 x mini USB1 x DC 5V
Power Consumption 3.9W
Audio Accepts up to Dolby TrueHD or DTS-HD Master Audio Outputs 2Ch audio
Resolution Video: up to 1080pVESA: up to 1920x1200
Dimensions 1.18 x 4.92 x 4.33 in30 x 125 x 110 mm
Weight 0.57 lbs0.03 kg
Temperature Operating32°F to 104°F 0°C to 40°C
Storage -4°F to 140°F 20°C to 60°C
Certifications CE, FCC, RoHS, cULus for power supply
Dolby Digital Plus 7.1 is not supported by the AT-HD-M2C