175L

CSR

Crawler excavator 175LCSR

18.8 t

75 kW (102 HP)

0.67 - 1.12 m3

ROBU

ST. S

TRON

G. S

TABL

E.

TECH

NICA

L SP

ECIF

ICAT

IONS

Technical specifications

www.atlasgmbh.com

ENGINE HYDRAULIC SYSTEM EQUIPMENTPower rating acc. to ISO 9249 .... 75 kW (102 HP)RPM .................................................. 2100/minMake / model ............. Deutz / TCD 2012 L04 2VDesign ............ Turbocharger/Charge Air coolingDisplacement .....................................4040 cm3

Number of cylinders ........................................ 4Cooling system ............................ Water-cooledAir filter ........................................... Dry air filterBattery .................................... 2 x 12 V / 100 AhGenerator ...................................... 24 V / 55 AhStarter ............................................ 24 V / 4 kW

• AWE 4 system • Load limit controlled high-performance pump• Fuel-efficient flow-on-demand control• Suction valves for all work functions • Load-retaining a. fine lowering valves in lifting circiut• Restrictors in the lift and articulating circuits• Primary and secondary overload protection• Hydraulic system ................ 1 x Axial piston pump• Main pump ........................................... HPR 105• Max. oil flow ......................................... 220 l/min • Max. operating pressure ........................ 340 bar

BASIC UNIT A41.82:• Base arm C53.41• Adjustable boom C53.46, working length 3095 mm• Stick D53.3, working length 2650 mm

DRIVER´S CAB:• Air-conditioning• Preparation for radio installation• Air-cushioned comfort seat (seat heating optional)• Panorama glazing with heat-absorbing glass

TRACTION DRIVE UNDERCARRIAGE FILL CAPACITIES• Max. speed ............................. 2.4 / 5.0 km/h• Tractive force .................................... 153 kN• Max. gradeability ................................... 70%

• X-frame• Track 2.2 m, Base plate width 600 mm• Drive quality B4HD

• Fuel tank ......................................... 190 litres• Engine oil .......................................... 13 litres• Hydraulic tank ................................. 200 litres

DRIVER´S CAB SWING ASSEMBLY ATTACHMENTS (SELECTION)• Type ........................ Atlas comfort cabin 935• Total length .................................... 1760 mm• Width ............................................... 935 mm• ISO 6396 (LpA) in driver's cab ........... 75 dB(A)• 2000/14 EG (LwA) ambience level ..98 dB(A)

• Max. swing speed ...................................... 9/min• Swing torque ....................................... 37.5 kNm• Automatically controlled multi-disc brake• Axial piston motor with priority valve

• Bucket F415 / 0.67 m3 / 850 mm wide• Bucket F416 / 0.82 m3 / 1000 mm wide• Bucket F417 / 0.92 m3 / 1100 mm wide• Bucket F648 / 1.12 m3 / 1300 mm wide

0

0

1

1 2 3 4 5 6 7 8 11

-1

-2

-3

-4

-5

-7

-8

2

3

4

5

6

7

8

9

10

11

12

10

-6

FG

B A J

DDL

H

Working ranges Hydraulic adjustable boom (C53.41)Bucket pivot pointMax. digging heightMax. digging depthMax. reachMax. digging reachMax. arm positionMax. reach heightLowest bucket pivot pointMax. bucket digging forceMax. stick digging forceGrab clamping forceOperating WeightTailswing radius Transport lengthTransport width (800mm Chain width)Transport height

8.72 m-

5.58 m7.90 m9.30 m2.65 m

10.12 m4.18 m130kN72 kN

-18.8 t

1.575 m7.90 m

3.0 m3.02 m

8.72 m6.22 m6.68 m7.90 m8.70 m2.65 m

-4.18 m

--

73 kN19.0 t

ABDFGHJL

Bucket Grabs

All values in kilogrammes (kg) were determined acc. ISO 10567 and include a stability factor of 1.33 or 87% of the hydraulic lifting capacity.These values are applicable at the top of the arm with optimum positioning of the corresponding arm system and with powerboost switched on. *Value limited due to hydraulics.

Lifting capacities Hydraulic adjustable boom (C53.41) and stick 2.65 m (D53.3). Swing radius 1575 mm

3.0 m 4.0 m 5.0 m 6.0 m 7.0 m

Height FRONT LATERAL LATERAL LATERAL LATERAL LATERALFRONT FRONT FRONT FRONT

+6.0 m+4.5 m+3.0 m+1.5 m+0.0 m-1.5 m-3.0 m

9510*

10510*

11474*

12151*

12471*

7973

7704

7601

7208

7141

4806*

7561*

8118

8089

8263

8104

4806*

5142

5006

4948

4694

4556

4700*

5159*

5933

5829

5836*

5760

5575

3894

3844

3755

3691

3600

3431

3262

3894*

4614

4560

4531

4422

4261

2858

2953

2930

2875

2714

2554

3446*

3552*

3499

3412

2193

2209

2155

2070ATLAS Maschinen GmbHEXCAVATORSAtlasstrasse 627777 Ganderkesee, GermanyT: +49 (0) 4222 954 0F: +49 (0) 4222 954 343 info@atlasgmbh.com

175LCSR-EN (1) Effective date: August 2010. Product specifications and prices are subject to change without notice or obligation. The photographs and/or drawings in this document are for illustrative purposes only. Refer tothe appropriate Operator’s Manual for instructions on the proper use of this equipment. Failure to follow the appropriate Operator’s Manual when using our equipment or to otherwise act irresponsibly may result in seriousinjury or death. The only warranty applicable to our equipment is the standard written warranty applicable to the particular product and sale and Atlas makes no other war- ranty, express or implied. The only warrantyapplicable to our equipment is the standard written warranty applicable to the particular product and sale and Atlas makes no other warranty, express or implied. Products and services listed may be trademarks, servicemarks or trade-names of Atlas Maschinen GmbH and/or its subsidiaries. All rights are reserved. Atlas® is a registered trademark of Atlas Maschinen GmbH.Copyright © 2010 Atlas Maschinen GmbH. Ref. no. 6144199

9