atg presentation · pdf fileatg presentation 2014 created by zbynek zavadil september 16,...

$: Atg Presentation · PDF fileATG PRESENTATION 2014 Created by Zbynek Zavadil September 16, 2014 . 2 ... UT TOFD – Time of flight diffraction technique$
ATG PRESENTATION 2014 www.atg.cz

www.atgtesting.com

Created by Zbynek Zavadil

September 16, 2014

2

MOTTO: „ATG GOAL IS TO SOLVE CHALLENGES OF OUR CUSTOMERS IN SPECIAL

PROCESSES NDT, WELDING, COMPOSITES, SURFACE TREATMENT“ Vision To be a financially strong, technology company on the international scale in the area of industrial inspections, ensuring the quality of Customer’s products by implementing a complete solution of advanced technologies, products and services, based on the latest technical trends and development. Introduction, ATG activities, Basic Information

ATG IS ISO 9000:2008 CERTIFIED

ATG IS ISO 17043 ACCREDITED

ATG – Advanced Technology Group – www.atg.cz

Beranovych 65, Praha 9, 190 00, Czech Republic

INTRODUCTION



ATG (Advanced Technology Group) Ltd. is an engineering company active in special processes as NDT, welding, plant inspection, inspection, material and corrosion analysis

ATG Ltd. is a company with closed chain of products as follows:

Personnel qualification

Services in special processes (providing, consultancy, expertising ...)

Production for NDT

Independent inspection (Second and Third party inspection)

It means the company offers the complete technical solution for special processes as NDT, welding …

3

ATG MAIN ACTIVITIES


Beranovych 65, Praha 9, 190 00, Czech Republic 4

ATG activities are concentrated in the following areas in more details:

o NDT process – nondestructive testing

o Welding process

o Plant inspection – corrosion and material engineering

o Independent inspection (TPI - The third party inspection, second party inspection) + ASME Code, PED, ISO 3834, ISO 15607, etc.,

o Technical Personnel certification acc. to ISO 17024 (ATG CERT)

o Proficiency approval of NDT processes according to ISO 17043

o Design , production and system integration for NDT process

o Research and development in NDT, in material and corrosion analysis

BASIC INFORMATION



Company type Ltd.

Established 1992

Number of permanent employees 95

Number of university graduated 60

Number of Ph.D. 7

Number of NDT Level III qualified 28

Number of NDT Level III qualifications 83

Number of subsidiaries 9

ATG branches in Czech Republic Pilsen – western Bohemia Ostrava – northern Moravia

* These data are valid to February 15th 2014

ATG PERSONNEL GROWTH



Consolidated number of employees of the main ATG companies (ATG Prague, LA composite, ATG Slovakia) is 220 persons in 2014

ATG TURNOVER GROWTH



Turnover structure (approximately 10 milion USD)

o NDT HW production – 50% (long term projects cause a fluctuation)

o Independent inspection and NDT services – 25%

o Personnel qualification and certification – 25%

ATG INTERNAL STRUCTURE



Affilations ATG CEO Zbynek Zavadil Tomas Netusil

Daughters

SECRETARY ECONOMY

QUALITY ASSURANCE Josef Leger

SALES Ondrej Doubek

NDT SERVICES Vaclav Jandura

INSPECTION Jan Svub

PRODUCTION Zdenek Zdimera

RESEARCH & DEVELOPMENT

ATG CERT

Martin Ruzicka

NDT INSPECTION Petr Tichy

INSPECTION PLANT, TPI

DESIGN Jakub Horejsi

NDT TRAINING Vladimira Kohoutkova

INSPECTION TRAINING Michaela Markova

TECHNOLOGY Tereza Uhlova

PROFICIENCY APPROVAL (ISO 17043) Vaclav Jandura

AWS training Andrey Mlich

API training Josef Prokop

REALIZATION ASSEMBLY Vladislav Zak

EASA PART 145 process D1 Vaclav Jandura

SERVICE Tomas Toms

ATG EXTERNAL STRUCTURE / SUBSIDIARIES , AFFILATIONS



ATG PRAGUE – SUBSIDIARY COMPANIES

CZECH REP

LA COMPOSITE PK-Q ATG – INSPEKTA

SLOVAK REPUBLIC ATG SLOVAKIA

RUSSIA ATG AFFILIATION MOSCOW ATG ACADEMY

UKRAINE ATG – ONIKO

TURKEY ATG TECHNOLOGIC

UAE ATG TCS

10

TECHNICAL PERSONNEL TRAINING

WITH ATG

Qualification training coverage,

Standard NDT methods, Specialized methods



11

ATG covers qualifications in these areas:

NDT - nondestructive testing

Welding coordination personnel and welders

Third Party Inspectors

Plant Inspectors

o API 510 – Pressure vessel

o API 570 – Process piping

o 653 – Storage tanks inspector

o Corrosion technologist/engineer/inspector

o Crane inspector ..

PERSONNEL TRAINING ~ OVERVIEW



All training/courses can be realized/performed in both ways:

o independent central certification acc. to ISO EN 17024 and by ATG CERT or authorized Certification Bodies

o or employer certification acc. to SNT-TC-1A too

All training/courses and exams can be performed in the customer facility or in ATG training centers

Schedule/Program of courses - in the employer certification system are scheduled acc. to …employer requirements

The implementation of these qualifications can be supported by Service Level III department activity - creation and implementation of employer legislative (procedures, instructions, audits, ..... etc.)

Support Level III for customer or independent audits

12

Qualification training covers all basic NDT methods in qualification levels 1,2 and 3

PERSONNEL TRAINING – NDT METHODS



RT

UT

PT

MT ET

VT

LT

ATG offers more specialized methods or testing systems as follows

IRT – Infrared Thermography ST - Shearography TCS - Testing of Composite and Bonded

structures (Mechanical Impedance Method, Pitch-Catch, Resonance Method, Transmission UT, Tapping, IRT - Infrared Thermography, ...etc)

UTM - Ultrasonic Thickness Measurement

UT TOFD – Time of flight diffraction technique

UT PA – Phased array technique LT – Leakage testing RTI - Interpretation of Radiographs LA – Lubrication Analysis

13

CZECH REPUBLIC o PRAGUE

o PILSEN

o OSTRAVA

SLOVAK REPUBLIC o TRENCIN

o ZIAR NAD HRONOM

o KOSICE

RUSSIA o MOSCOW S7

o MOSCOW - NIKIMT

o SANKT PETERSBURG – NDT ACADEMY

o NOVOSIBIRSK S7

UKRAINE o KIEV – ATG ONIKO

ATG TRAINING CENTERS STRUCTURE



TURKEY o ISTANBUL – ATG TEKNOLOGIC

IRAQ o BAGHDAD – PERTC

UAE o ABU DHABI – ATG TCS

LATVIA o RIGA – INSPECTA LATVIJA

SERBIA o BEOGRAD - METALINSPEKT

ALGERIA o ALGER - YIT

In all countries is possible to organize qualification training and examinations at plants of the Customer

14

ATG CERTIFICATION

Independent Central Certification (TUV Nord, Reaktortest, Inspecta L, AWS, IIW CWS ANB),

Employer Certification, ATG CERT



PERSONNEL CERTIFICATION



ATG can offer both qualification schemes together with contractual partners and partner Certification Bodies. The final decision of the Customer is dependent on its request:

Independent Central Certification (ISO 17024 and equivalent)

NDT process

ISO 9712 – ATG is an authorized training and examination center (authorized by TÜV Nord , Reaktortest, INSPECTA L)

ISO 11484 - authorized training and examination center (authorized by Reaktortest)

ATG CERT – ATG has own certification body acc. to ISO 17024 for NDT, welding, TPI and Plant Inspection personnel

ASME ANDE-01 is expected to be the basic certification scheme

15




WELDING process

AWS (American Welding Society) – CWI (Certified Welding Inspector) and CRI (Certified Radiograph Interpreter) contractual agent agency of AWS

CWS ANB –

o IWI (International Welding Inspectors) qualification

o IWE/T (International Welding Engineers, Technologists, Specialists) in cooperation of Czech Technical University

o Welders according to EN 287/ISO 9606 in cooperation of DOM 13

Welders according to ASME BPVC IX

Welders accrding to AWS D.17




Employer Certification

NDT process SNT-TC-1A – ATG provides qualification in the most common Employer systems especially for

pressure equipment production

EN 4179/NAS410 (aerospace) - ATG is approved as Outside Agency by National Aerospace NDT Board and can qualify companies working according to EASA Part 145 (MRO) and/or EASA Part 21

ISO 11484, EN 10 256 – ATG provides qualification system for steel products and tubes

Welding process Welders according to ASME BPVC IX

Welders accrding to AWS D.17

18

ATG CERT covers personnel certification in following processes:

NDT - nondestructive testing

Welding process - coordination personnel and welders

Third Party Inspection

Plant Inspection including

o Corrosion inspectors (API 510, 570, 653)

o Crane inspectors etc.

ATG CERT ~ PERSONNEL CERTIFICATION



ATG Cert basic information:

from March 2011

independent central personnel certification acc. to ISO EN 17024 for NDT, welding, third party inspection and plant inspection

non accredited certification

own examination center

possibility to use previous qualification

system of approved exam centers from outside certification systems

Czech, Russian, English versions of examination questions

Czech, Russian, English, Arabic speaking examiners

ATG COMPLETE SERVICES FOR NDT



ATG can support you for all methods in following directions:

o Analysis of technical problem

o Proposal for solution of this problem

o Verification/confirmation of proposed solution by own equipment and personnel

o Coverage of starting period of routine testing by ATG operators

o On the job training of customer operators

o Qualification and certification of the customer operators according to the customer request (SNT-TC-1A, ISO 9712, NAS 410 ……)

o Technical support for NDT equipment deliveries by Level 3

o Complete Level 3 services for the customer

19

NDT INSPECTION MAIN ACTIVITIES



METHOD EQUIPMENTS/ TECHNIQUES STAFF (contact person)

RT Radiographic Testing

radiography (from 20 kV up to 400 kV) gamagraphy (Ir, Se, Co) radiometry , Digital radiography, cabinets

Pavel Maranek, RT Level III

UT Ultrasonic Testing

through transmission, immersion + squirter system thickness measurement reflection

Jan Matousek, UT Level III

PT Liquid Penetrant Testing

dye penetrant fluorescent penetrant

Pavel Maranek, PT Level III

FPI Fluorescent Penetrant Inspection

fluorescent penetrant lines UT cleaning

Zbyněk Zavadil, PT Level III

MT Magnetic Particle Testing

hand yokes (AC/DC, 230V, 42V) mobile generators (AC/DC up to 4000A) stationary MT benches (ASTM 1444)

Josef Krejča, MT Level III

ET Eddy Current Testing

structuroscopes single-frequency ET apparatus multi-frequency ET apparatus with all probes

Petr Tichý, ET Level III

VT Visual Testing

direct VT of welds and castings indirect VT (boroscopy, endoscopy)

Vaclav Jandura, VT Level III

LT Leak Testing

integral methods (pressure) differential methods (bubble technique, penetrant,

He spectrometer)

Václav Jandura , LT Level III

20

21

ATG PRODUCTION FOR NDT

Products designed and produced by ATG,

Imported products, ATG production types



22

„ATG DOES NOT OFFER ONLY EQUIPMENT, BUT IT

OFFERS COMPLEX SOLUTION FOR YOU AS WELL“

Analysis of problem/task - proposal of solution - design –

realization/production - delivery - personnel qualification



23

PRODUCTION FOR NDT



Complex systems for all NDT methods: UT, ET, MT, RT Manipulators Transport system for testing

systems benches and stands UT, ET, MT, PT/FPI testing lines Handy equipment for NDT as: Electromagnetic yokes Viewers Densitometers Test and calibration blocks: Test pieces Etc.

Products designed and produced by ATG

PRODUCTION FOR NDT/ ATG COMPLETE SERVICES FOR NDT



ATG OFFERS A COMPLETE SOLUTION FOR NDT:

o TECHNICAL PROBLEM ANYLYSIS

o TECHNICAL PROPOSAL OF POSSIBLE SOLUTIONS

o DELIVERY OF HW/EQUIPMENT

o DELIVERY OF NDT PERSONNEL QUALIFICATION ACCORDING TO THE REQUESTED QUALIFICATION AND CERTIFICATION SCHEME

o SUPPORT FOR IMPLEMENTATION OF NDT PROCESS BY COOPERATION FOR INTERNAL CUSTOMER QA SYSTÉM AN DLEGISLATIVE

o AUTHORIZED SERVICE

24

25

FPI LINES



26

MT SYTEMS



27

UT MANIPULATORS / SCANNERS



28

ET MANIPULATOR - WHEELTESTER



29

ATG FOR OIL & GAS AND POWER

INDUSTRY

Regions of activities/interest, Out-source services,

NDT equipment, Training of technical personnel, Others



ATG FOR OIL & AND POWER INDUSTRY



Regions of ATG activities/interest:

Out-source services (Outside Agency) for:

oil refineries LPG projects

lube oil plants tank farms

oil and product pipelines hydrocrack plants

water and steam power plants nuclear power plants

NDT services-routine testing in all methods RT,UT,MT,PT, T,VT by Level II acc. to ISO 9712 or SNT-TC-1A

NDT supervision by Level III operators

NDT Level III service - implementation of company NDT system, NDT personnel training for PED too, support for creation of written procedures etc., support for ASME Code + NDT Services - Providing of NDT (RT, UT, MT, PT/FPI, ET, VT, LT) by EN and SNT-TC-1A qualified NDT operators/staff

Welding inspection - service of IWI and EWI, support for EN ISO 15614 Part 1:2004 (WPS a WPAR) and ISO 3834

Plant Inspection/Corrosion inspection and material selection




NDT (Non Destructive Testing) equipment for:

crack and surface/subsurface defects detection of ferromagnetic materials MT - magnetic particle equipment, magnetizing units - own production

crack and surface defects detection of non-ferromagnetic materials PT/FPI

crack and surface/subsurface defects detection of conductive materials ET - lines (ROHMAN)

internal defects of castings RT - systems incl. shielding cabinets, roentgen tubes, manipulators, image processing

internal defects of cast, forged and machined parts UT - ultrasonic testing equipment

internal defects of castings RT - radiographic and radioscopic systems - real time imaging systems




Training of technical personnel for:

:

Others: Risk and Failure Analysis

Design and Material Selection

Residual Life Assessment

NDT - according to SNT-TC-1A and ISO 9712 as approved training body of ATG Cert or alternatively by Reaktortest and TUV Nord which are accredited, training for PED (Pressure Equipment Directive) purposes

Welding - welding inspectors and coordinated personnel (ISO 14731) as ATG approved training body of CWS-ANB (Czech Welding Society - Authorized National Body) approved by IAB/IIW, EWF and EOTC

Plant Inspection/Corrosion - technicians and technologists

Third Party Inspection

33

PARTNERS & ATG AS A DISTRIBUTOR

ATG contractual partners, ATG collaborating inspection

and supervision companies, ATG as an (authorized) distributor



ATG CONTRACTUAL PARTNERS



HARTFORD STEAM BOILER INTERNATIONAL Ltd, Germany

support for ASME Code, PED (97/23/EU European Directive) as Notified Body

CANSPECT, Toronto, Canada independent third party inspection personnel qualification

METAMAK, Istanbul, Turkey personnel qualification and certification SVUOM s.r.o., Prague, Czech Republic (former National Research Institute for Material Surface Protection)

training center for corrosion personnel painting inspection

BV Inc., Prague, Czech Republic RLA - Residuum Life Assessment of Power Systems, Petrochemical Systems

TÜV Nord Czech (accredited certification body for NDT personnel + Recognized Third Party Organization acc. to 97/23/EU)

ATG as approved training and examination center for NDT personnel qualification and certification according to ISO 9712

INSPECTA LATVIJA (accredited certification body for NDT personnel + Recognized Third Party Organization acc. to 97/23/EU)

ATG as approved training and examination center for NDT personnel qualification and certification according to ISO 9712,

ATG CONTRACTUAL PARTNERS



REAKTORTEST s.r.o., Trnava, Slovak Republic (nuclear power plants inspection, accredited certification body for technical personnel)

ATG as approved training and/or exam centre for NDT according to EN 9712, EN 4179, corrosion personnel, welding inspectors

TÜV Nord, Essen, Germany (accredited certification body for NDT personnel + Recognized Third Party Organization acc. to 97/23/EU)

ATG as approved training and examination center for NDT according to ISO 9712

CWS ANB (Czech Welding Society Authorized National Body) - accredited certification body for welding personnel, approved by EWF, EOTC

ATG as approved training centre for EWI - European Welding Inspectors

API (American Petroleum Institute), USA Approved training body according to TPCP for RT, PT, Plant Inspectors and Welding Inspectors, now is transformed to API-U system

AWS (American Welding Society), USA Contractual agent organization for CWI and CRI qualification

36

Inspekta, Milano, Italy

T.EX.IN.srl, Dalmine, Italy

2R Due Erre Engineering, Ravenna, Italy

CANSPECT, Canada

S&Qmart, Turkey

Banford Associates, Iverurie, UK

Bureau Veritas, Prague, Czech Republic

3P Quality Services, Bavel, The Netherlands

Trest Belpromnaladka, Minsk, Belorussia

YAMANI INSTITUTE OF TECHNOLOGY, Algeria

ATG COLLABORATING INSPECTION AND SUPERVISION

COMPANIES



Marisand Impex, Bucharest, Romania

Al-Rook Company for Engineering Services, Baghdad, Iraq

Tecnic Company, Banjas, Syria

Omic, Tokyo, Japan

Baxcounsel Inspection Bureau, Bombay, India

INCOK, Seoul, Korea

QA Management, Perth, Australia

SQA Services, San Diego, USA

JIC, Tokyo, Japan

ATG AS AN (AUTHORIZED) DISTRIBUTOR



ARDROX/ CHEMETALL (BRD)

PT + MT + AEROSPACE REPAIR - chemicals, penetrants, cleaners etc

MR CHEMIE (GERMANY) PT + MT - UV lamps

SONATEST (GB) UT - handy defectoscopes, thickness meters, UT probes

SOCOMATE (RF) UT - multichanel systems

TECNITEST (SPAIN) UT - testing of spot welds for automotive industry

ROHMANN (GERMANY) ET - detection of surface defects in nuclear and aerospace industry, measurement of conductivity ET - detection of surface defects in automotive industry, multi-frequence sorting of materials - STRUCTUROSCOPY

ATC (USA) LT – leak testing systém for automotive industry especially

BALTEAU NDT (BELGIUM) RT - industrial mobile and stationary X-ray machines

KODAK (USA) RT - industrial radiographic films

OLYMPUS INDUSTRIAL /KEYMED (JAP/GB) VT- fibro-scopes, bore-scopes, video-scopes

38

LIST OF MAIN REFERENCES



39

ISO 9712 ENEL CZECH POWER PLANTS RWE TUV NORD TUV SUD SGS INSPEKTA SKODA MOO OF IRAQI REPUBLIC

IWI RWE TUV SUD SKODA VITKOVICE Level 3 Services SKODA WORKS and 50 companies

LIST OF REFERENCES - PERSONNEL QUALIFICATION



EN4179/NAS410

AEROFLOT

CZECH AIRLINES

TRAVEL SERVICE

S7

ROSSYA AIRLINES

SATURN RYBINSK

VASO VORONEZH

UT AIR

IRAQI AIRWAYS

PRI NADCAP support

AERO VODOCHODY

LLV LATECAURE

JIHLAVAN

JIHOSTROJ

PBS VELKA BITES

40

MT (Magnetic Particle Testing) – benches and systems

o HUTA CELSA (PO) – for MAN

o VW (SK)

o GE AIRCRAFT ENGINES (CZ)

o CEZ – CZECH POWER PLANTS (CZ)

o KINEX (SK) – for Honneywell

o VIAM (RF)

o CZECH AIRLINES

o ………….

PT (Penetrant Testing) – FPI lines

o ELBIT (RO) – for RR

o WSK (PO) – for P&W

o AEROFLOT (RF)

o IAZ IRKUTSK (RF) – for IAZ, AIRBUS

o STROJMETAL (CZ) – for AUDI

o FAGOR (ESP) – for BMW

o HIDRIA – for VW

o UMPO UFA – for P&W

o HONEYWELL (CZ)

o …….

REFERENCE LIST - NDT HW



UT (Ultrasonic Testing) – UT tanks and automated manipulators/lines o PCC (CZ) – for RR, SNECMA, GE

o KINEX – for HONNEYWELL

o ALCAN/CONSTELIUM (CZ)

o …………….

ET (Eddy Current Testing) –manipulators, automated lines o TPA (GER) - wheeltester

o S7 - wheeltester

o VTS VNUKOVO – wheel tester

o UT AIR – wheeltester

o ………………

RT (Radiographic Testing) – radiographic, shielded workshops, manipulators o PBS BRNO (CZ)

o ARAKO (CZ)

o ………………….

LT (Leak Testing) – automated systems for AUTOMOTIVE industry o HELLA (SK)

o REA (SK)

o AISIN (CZ)

o …………..

41

Inspection work on petrochemical, power and other plants, which our experts were involved in (covering both shop and site inspections): Salahuddin Refineries I, II - Technoexport - SEORGI Baiji Lube Oil Plant - SCOP Tuba Tank Farm, Basrah - MHI - SCOP Third Pay Zone Development Project, Basrah - MHI -

SCOP Dry Gas Pipeline Project - SCOP Basrah Refinery I,II - Technoexport - SEORGI Strategic Pipeline - SCOP North Refinery Project, Baiji - Chyioda - SCOP Lube Oil Storage Tanks, Baiji - Technoexport - SCOP Sfaya Oil Field Project - SCOP Khabaz Oil Field - SCOP Daura Refinery - Technoexport – SEORGI Najibyiyah Power Plant, Basrah - Technopromexport

- MOI Daura Power Plant - Kraftwerk Union - SOE Al Shemal Power Station - GIE - SOE Haditha Hydraulic Plant - Litostroj - SOE

LIST OF REFERENCES - INSPECTION



SF 6 Switchgears - 6 sites - SOE Water Treatment Plants - UN Projects - MOI Paper Mill, Basrah - Sulzer - MOI Paper Mill, Amara - Sulzer - MOI Cement Factory, Falluja - Polish Supplier - MOI Cement Factory, Kirkuk - MOI Sponge Iron Plant, Basrah - Cressot Loire - MOI East Factory, Amara - MOI Loading of Sulphur, Um Quasr, State

Organization for Minerals, MOIM

Inspection Engineers working at: Inspection Department of BPC, Basrah Inspection Department of NPC, Kirkuk

Two of our electrical inspectors worked as so called International Observers in Iraq on energy projects employed by the United Nations on the basis of the Security Council Resolution No.986 (Oil for Foodstuffs).

42

Snohvid Project - Nexans, Norway

Castor, Constor Projects - German Geselschaft fuer Nuclear Sicherheit, Germany

Remanent Life Assessment of Butadien Unit - Kaucuk Refinery, Kralupy, Czech Republic

Sulphur Production Projects - Ceska Rafinerska Refinery, Kralupy/Litvínov, Czech Republic

Risk Based Inspections of MTBE Production - Ceska Rafinerska Refinery, Litvínov, Czech Republic

Kandla – Bhatinda Pipeline Project, India

JGC Petrochemical Project - Dubai, UAE

Thessaloniki PVC Plant – Greece

Water Treatment and Distribution Plants, Syria

Banias GCG Power Plant - Banias GCG, Syria

Oersted Power Plant, Denmark

Nuevitas Power Plant, Cuba

Las Camariocas Aluminum Plant, Cuba

Shen – Tou Power Plant, China

Aircraft Engineering NDT Inspections - various clients

NDT performance and consulting - Skoda Auto, Czech Republic

Czech Power Plants (CEZ) - longterm periodical inspections of boiler drums in service in all power plants

LIST OF REFERENCES - INSPECTION



remnant life assesment, Czech Republic

Czech Power Plants (CEZ) - FCB Boiler K 8, Czech Republic

Heat Station Dvur Kralove - Boiler K 3, Steam Piping, Czech Republic

FBC (Fluidized Bed Cooler) for Boiler K 11, Energetika Trinec, Czech Republic

Teplarny Brno – Bus Steam Piping 10 MPa, Czech Republic

Teplarny Brno – Remnant Life Assessment of the Pressure System in service, Czech Republic

Eastman Sokolov, Power Division – Boilers K13, K14, Czech Republic

Hexion Sokolov, Power Division – Feeding Water Heat Conditioning, Czech Republic

Slavia Capital – Palma Bratislava – Biodiesel Production – Technical Due Diligence, Slovakia

Daiho, Impress, Eaton, Koito, Zexel Valeo, Candy/Conta – Technical Assistance during plant erections, Czech Republic

Raiffeisen Leasing – Technical Due Diligence at Paper Mill Plant Loučovice, Czech Republic

and others

43

ATG CONTACT LIST

Sales, Inspection/supervision, Personnel

training/qualification, ATG cert/personnel certification,

NDT services and Outside Agency, Production, Projection and design



ATG CONTACT LIST



SALES Ondrej Doubek tel: +420 273 073 612 fax: +420 273 073 600

e-mail: [email protected] mobil:+420 731471889

Jan Vondra tel: +420 731 471 898 e-mail: [email protected]

INSPECTION/SUPERVISION Jan Svub tel: +420 731125025

Fax: +420 273 073 650 e-mail: [email protected]

Josef Prokop tel: +420 739634658 Fax: +420 273 073 650 e-mail: [email protected]

44

mailto:[email protected]





ATG CONTACT LIST



PERSONNEL TRAINING / QUALIFICATION

Vladimíra Kohoutková tel: +420 273 073 630 fax: +420 273 073 600

e-mail: [email protected] mobil: +420 731125024

ATG CERT / PERSONNEL CERTIFICATION

Martin Ruzicka tel: +420 273 073 607 fax: +420 273 073 600


NDT SERVICES & OUTSIDE AGENCY

Vaclav Jandura tel: +420 273 073 620 fax: +420 273 073 600


PRODUCTION Zdenek Zdimera tel: +420 273 073 640

fax: +420 273 073 600


PROJECTION AND DESIGN Jakub Horejsi tel: +420 603181263

fax: +420 273 073 660

e-mail: [email protected]







atg presentation · pdf fileatg presentation 2014 created by zbynek zavadil september 16,...

Documents