atc systems oems - plenumstatic.plenummedia.com/40847/files/20160108091038-atc-oems.pdf ·...
TRANSCRIPT
Avenida de la Constitución 232, Torrejón de Ardoz,28850 Madrid – SPAIN Phone: +34 916 766 363
www.atc-sys.com
OEMs
1- CAPABILITIES:1.a- Engineering, Work shop & Field Services
3a- LUBRICATION & CONTROL:3a.1- Pressurized Seal Auxiliary API Plan
- Non pressurized Seal Auxiliary API Plan3a.2- Seal Systems for Mixer in Reactor Application3a.3- Manual & Self Operated Filling Unit3a.4- Customised Hydraulic Power Units3a.5- Special Purpose Lube Oil Systems Chapter 1,23a.6- General Purpose Lube Oil Systems Chapter 1,33a.7- Lube Oil Systems for Power Gen. Pumps3a.8- Lubrication Skids for Blower in Power Plants3a.9- Multi- Point Lubrication System for Siderurgy,
Pulp & Paper, Cement, Plastics, Sugar…3a.10- Water Oil Separator
3a.11- Filtering Unit
INDEX
3b.1- Heat Exchanger3b.2- Heater3b.3- Filter3b.4- Pressure Vessel3b.5- Junction & Control Boxes3b.6- Manifolds, Needle & Fittings3b.7- Accumulator3b.8- Alloyed HP Pipe Isometrics for Sour Wet3b.9- Bespoke manifold blocks
3c.1- Temperature local control System3c.2- Reverse detector & monitoring system3c.3- Shaft displacement system3c.4- Vibration radial Vertical & Horizontal transmitter3c.5- Ammeter
3b- ACCESSORIES & COMPONENTS:
3d- INSTRUMENTATION:
4- FIELD SERVICES : 4.a- Installation, Wiring & Commissioning
5- QUALITY: 5a -Certified bench instrumentation
2- ENGINEERING SERVICES:2.a- Design, Tests & Documentation
3d.1- Mechanical Level Gauges & Level Switches3d.2- Temperature Measurement3d.3- Instrument cabinets for extreme ambient conditions 3d.4- Flow Sights 3d.5- Restriction Orifice
3c- AUXILIARY SYSTEMS FOR ROTATIVE MACHINERY:
1- CAPABILITIES
1.a- Engineering, work shop & field services:
ATC SYSTEMS: Calculations, design, manufacture and marketing bespoke systems or distributed by ATC
ATC Professional team with extensive experience to design, mechanical & welding works, electricity & instrumentation, offering quality and confidence to customers.
More than 4.000 m2 dedicated to the production in different sites, 800 m2 of offices and common areas.
Software for calculations and designing.
- Work Shops: - Mechanical workshop (CNC milling lathe, CNC, vertical drills, etc.).
- Welding workshop ASME Welders and registered procedures (carbon, stainless steel and special alloys), .
ATC is ASME U-STAMP Certified, TIG, MAG, MIG, Plasma, welding robots and CNC micro-laser welding.
- Test Services: ( All Tools ENAC certified )• Calibration and programming laboratory for instruments.
• Hand-held tools for measuring isolation & signal quality.
• Sound level tool. Painting thickness.
• Pressure test facilities.
• Flow test calibrated for running test, signal with recording.
• Temperature test bench.
• Level measurement test bench.
Technical: - Flow Instruments, Valves & Thermowell- Filter & H. Exchanger calculation - Pressure Vessels calculation- Valves calculation- VDDL- Project management
Design:- 3 D drawing generation- Generation of Hook- Ups- P&ID Generation- Wiring diagrams.- Quality control plan- ITP/QCP- Cause / Effect System diagram
Test:- Hydrostatic test certificate- Dye penetrant test- Other NDE: X-Ray, Ultrasonic, Hardness ...- Dimensional control- Wiring loop test certificate- Wiring isolation test certificate- Running Test
2- ENGINEERING SERVICESDocumentation:
- Welding dossier (WPS, PQR & WPQ)- “EC” declaration of conformity- Certificates of Area Classifieds- Material certificates EN10204.3.1 for
pressured and wet parts, other EN10204.2.2- Instrument Calibration Certificates- Tags list- Spare part list- Painting inspection reports- Packing Photos- NDE test reports- Datasheets- G.A. Drawings- Electrical drawing & Signal list- Start up & maintenance manuals
- Design, Test & Documentation
4- FIELD SERVICES
4.a- Installation & Commissioning.
Qualified technicians to perform installations, start- up and commissioning by certified engineers, technical assistance worldwide.
ATC is an ISO 9001 company certified, working under IEC, NEC, ATEX standards. ATC ´s test benches are ENAC instruments certified. All our systems are EC Stamp and PED 97/23EC and ASME U-Stamp when it is required. Personal with registration for working in Oil & Gas facilities.
3- PRODUCTS: For products information, please contact at: [email protected]
5- QUALITY
5a – Test bench instrumentation, certified