asybcoviking pump gear pump viking series 115 canadian • ideally suited for direct drives at...

ASYB

CO

POMPE À ENGRENAGES GEAR PUMP

VIKI

NG P

UMP

GEAR PUMP VikingSeries 115 Canadian

• Ideally suited for direct drives at nominal motor speeds from 900 to 1750 RPM.

• Capacities to 30 GPM (114 LPM). Sizes 3/4’’ thru to 1 1/2’’ (19 mm thru to 38 mm). Differential pressure to 100 PSIG. (690

kPa).

PumpSeries

32

115

32

115

32

115

32

115

Pump Model

G

G 2

H

H 4

Suctionand

DischargeSize (In)

3/4

(NPT)

1

(NPT)

1

(NPT)

1 1/2

(NPT)

ViscositySSU

38100750

2 5007 500

25 00038

100750

2 5007 500

25 00038

100750

2 5007 500

25 00038

100750

2 5007 500

25 000

PumpRPM

1 2001 2001 200

950780640

1 2001 2001 200

950780640

1 2001 2001 200

950780640

1 2001 2001 200

950780640

25 PSI

GPM

5.76.06.05.24.23.45.76.06.05.24.23.4

10.010.010.59.07.25.8

20.020.021.017.515.011.2

50 PSI

GPM

5.56.06.05.24.23.45.56.06.05.24.23.49.0

10.010.59.07.25.8

20.020.021.017.515.011.2

75 PSI

GPM

5.96.05.24.23.4

5.96.05.24.23.4

10.010.59.07.25.8

20.021.017.515.011.2

100 PSI

GPM

5.96.05.24.23.4

5.96.05.24.23.4

10.010.59.07.25.8

20.021.017.515.011.2

• General Purpose

• Designed and engineered to serve petroleum, chemical,process and manufacturing industries.

• 750 GPM (2839 L/m) • 100 PSI (690 kPa)

• 1 1/2’’ to 6’’ (38.1 to 152 mm) • 2 000 000 SSU (439 500 CS)

SERIES 32 US

• Same as 115 Canadian• Long shaft non supported

by pillow block.

SERIES 115

• Same as 32 US• Need bearing to support shaft

VIKI

NG P

UMP

Viking TRUCK AND TRANSPORTROTARY PUMPS

Series 120

Liquid transfer service of

• Fuel oil• Kerosene• Asphalt• Gasoline• Diesel oils, industrial liquids• Petroleum products• Chemical products

• Pump operating speeds to 640 RPM• Capacities to 175 GPM• Sizes 1 1/4’’ thru 3’’• Pressures to 200 PSIG

Packing gland

Multi-ring, extra deep and long stuffing box, to reduce possibleleaks to absolute minimum. Self-adjusting dripproof mechanicalseals are available as an optional feature.

Self-priming

The series 120 pump is completely self-priming - eliminates vapourlocking conditions, excellent vacuum developing characteristics,assures complete ‘’pump out’’ in tank truck applications.

Shaft

Precision ground, extra heavy-designed so as not to deflect or twist under the most severe applications, assures longer sealing and bearing life.

J-124

K-124

KK-124

L&LQ-124

LL-124

LM-124

7502 5007 500

7502 5007 500

7502 5007 500

7502 5007 500

7502 5007 500

7502 5007 500

165550

1 650165550

1 650165550

1 650165550

1 650165550

1 650165550

1 650

400400400400400400400400400400400400400400400400400400

210210210210210210210210210210210210210210210210210210

325325325325325325325325325325325325325325325325325325

999999999999999999999999999999999999

163163163163163163163163163163163163163163163163163163

640520420640520420640520420640520420520420350420350280

32.025.021.063.051.041.085.070.058.01501209714611810314511590

1219580238193155322265220568454367553447390549435341

2.02.02.44.24.44.45.05.45.89.08.09.57.09.010.06.06.05.0

1179576238189155318265216556454367473439386549435341

3.03.53.16.06.06.08.07.57.512.512.012.512.012.012.511.09.08.0

31.025.020.063.050.041.084.070.057.01471209714511610214511590

1179176235189155318261212549439363537435379530416322

6.57.04.6

11.010.08.9

15.012.510.222.020.018.022.520.017.521.016.014.0

31.024.020.062.050.041.084.069.056.01451169614211510014011085

ModelSeries

SSU

Viscosities

CS oFoF oCoC

SpeedMaxRPM US

GPM

(2) Capacities & Power Requirements at Set Differential Pressures

LPM BHP LPM BHPUS

GPM LPM BHPUS

GPM

HydrostaticTest

PressurePSI

Max. RecommendedTemperature

Pack Seal50 PSI - 345 kPa 100 PSI - 690 kPa Max 200 PSI - 1380 kPa

ROTARY POSITIVE Viking DISPLACEMENT PUMPS

Series 124

•Rugged and dependable for demanding applications.

•Designed and engineered to serve petroleum, chemical,process and manufactured industries.

• 1000 USGPM (3 784 L/m) • 200 PSIG (1 380 kPa)

• 1 1/2’’ to 6’’ (38.1 to 152 mm) • 2 000 000 SSU (439 500 CS)

• 650 oF (340 oC)

VIKI

NG P

UMPS

34 US MODEL

Same as 230 series Canadian

JACKETED ROTARY PUMP VikingSeries 230 CanadianSeries Q 34 US

ModelNumber

* LQ34

* Q34

M34

N34

** PortSize

Inches

2 1/2

3

4

5

GPM

NominalPumpRating

90

200

280

450

RPM

420

350

280

280

25 PSI

Motor HP PSIG

3

7 1/2

10

15

50 PSI

5

10

15

25

100 SSUand up

100

75

75

75

MaxoT / oF

450

450

450

450

Steel FittedConstruction

RecommendedAbove thisViscosity

SSU

25 000

7 500

25 000

2 500

TempoF

365

365

365

365

PressurePSIG

Steam (Sat.)

Maximum Temperature Pressure of Fluid in Jackets

150

150

150

150

Heat Transfer OilTemp

oF

650

650

650

650

PressurePSIG

150

150

150

150

Maximum Hydrostatic

Pressure

PSIG

400

400

400

400

ApproximateShippingWeight

Pounds

180

350

530

750

Less than100 SSU

Maximum Discharge PSI

50

50

50

50

1 200

420

420

350

280

280

Model

H x 4 - 2301 1/2'' (NPT)

KK - 2302'' (NPT)

LQ - 2303'' (ANSI)

Q - 2304'' (ANSI)

M-2305'' (ANSI)

N - 2305'' (ANSI)

SSU

Viscosities

NominalCapacities

Based on50 PSI(345 kPa)

Power Requirementsat Set Diffenrential Pressures

100750

2 5007 500

100750

2 5007 500

100750

25007 500

100750

2 5007 500

100750

2 5007 500

100750

2 5007 500

CS

21165550

1 65021

165550

1 65021

165550

1 65021

165550

1 65021

165550

1 65021

165550

1 650

25 PSIBHP

.711.251.581.71.31.92.32.52.33.23.84.46.58.89.311.08.912.213.814.814.520.022.024.4

100 PSIBHP

1.752.152.112.224.74.64.54.27.87.07.37.0

50 PSIBHP

1.031.521.581.942.32.63.23.63.85.04.85.310.0

12.0

13.7

18.021.026.027.028.0

USG PM

20211715

463794938066

205215173145290300250210480490400340

RPM

PumpSpeed

950780

350280

350280

280230

230190

230190

17.0

75 PSIBHP

1.41.891.922.13.33.84.03.86.06.16.36.713.415.7

19.423.0

31.034.0

14.8

21.0

33.0

55

LPM

76796457

174140356352302250776814655549

1 0981 136

946795

1 8171 8551 5141 287

208

Viking Jacketed Pumps are specifically designed to handle heavy,viscous liquids requiring temperature control to maintain a flowingstate, assuring efficient handling of liquid pumped.

230 CANADIAN MODEL

Same as 34 series US

* “Q” Size has steel idler** Ports are suitable for use with 125# ANSI (ASA) cast iron or 150# ANSI (ASA) steel companion flanges fittings.

VIKI

NG P

UMPS

Viking ROTARY GEAR PUMPSeries 190

Model

Series

GG - 1901'' (NPT)

HJ - 1901 1/2'' (NPT)

HL - 1901 1/2'' (NPT)

AS - 1902 1/2'' (NPT)

AK - 1902 1/2'' (NPT)

SSU

Viscosities

750

2 5007 500

750

2 5007 500

750

2 5007 500

7502 5007 500

7502 5007 500

CS

165

5501 650

165

5501 650

165

5501 650

165550

1 650165550

1 650

1 8001 2001 2001 2001 8001 2001 2001 2001 8001 2001 2001 2001 2001 2001 2001 2001 2001 200

.93

.50

.701.022.031.201.602.302.501.401.902.902.203.605.603.204.207.00

USGPM

117772315161633212223363636565656

LPM

4226262687576161125798387136136136212212212

100 PSI

690 kPa

BHP

50 PSI

345 kPa

BHP

1.28.75.95

1.252.701.602.002.703.602.002.503.403.404.806.704.906.409.00

150 PSI

1035 kPa

BHP

1.681.001.151.503.502.102.503.204.602.803.204.004.706.007.806.808.10

11.00

200 PSI

1380 kPa

BHP

2.021.251.401.754.202.603.103.605.603.404.004.705.607.008.808.40

10.0012.20

250 PSI

1725 kPa

BHP

2.451.571.652.055.203.103.504.106.904.204.705.806.808.20

10.0010.2011.9014.00

Power Requirements at Set Differential Pressures

Pump

Speed

RPM

Nominal

Capacity

• 6 to 56 GPM• 250 PSIG• 10 000 SSU• -40 oC to 177 oC

Viking ROTARY GEAR PUMPSeries 180

Model

F

FH

GPM

Capacity

1.0

1.5

2.0

3.0

LPM

3.8

5.7

7.6

11.4

1 200

1 800

1 200

1 800

.25

.25

.25

.25

.25

.25

.25

.25

.25

.25

.25

.25

SSU

3810075038

10075038

10075038

100750

CS

320

1653

20165

320

1653

20165

100 PSI

HP

50 PSI

HP

.25

.25

.25

.25

.25

.25

.25

.25

.25

.25

.33

.50

150 PSI

HP

.25

.25

.25

.25

.25

.33

.33

.25

.33

.33

.50

.50

200 PSI

HP

-.25.25-

.33

.50-

.33

.50-

.50

.75

250 PSI

HP

-.33.33-

.33

.50-

.50

.50-

.75

.75

Power Requirements at Set Differential Pressures

PumpSpeedRPM

Oil Viscosity

Capacity range : 1 to 3 GPM3.8 to 11.4 LPM

Pressures to : 250 PSIG1725 kPa

• Relief valve optional• Heavy duty deep-grooved ball type radial

and thrust bearing• Standard with mechanical shaft seal

Viking AMMONIA ROTARY PUMPSSeries 480

• 60 GPM• 75 PSI• - 60 oF

Suction and

Discharge Size

Inches

Maximum

Pump Rating

1 1/2 npt

2 npt

2 npt

2 npt

3 asa

3 asa

Model

Number

JX1

KX1

KK

L

LQ

LL

GPM

11

22

30

50

50

60

RPM

280

280

280

280

280

280

Maximum

Recommended

Differential

Pressure PSIG

75

75

75

75

75

75

Minimum

Recommended

Temperature oF

Pumps can be used

to -60 oF if provision

is made for providing

heat to oil in

seal chamber.

-30

-30

-30

-30

-30

-30

Model

GG1'' (NPT)HJ1 1/2'' (NPT)HL1 1/2'' (NPT)AS2 1/2'' (NPT)AK2 1/2'' (NPT)

USGPM

NominalCapacity

8.05.019.011.026.016.0

28.0

46.0

LPM

301972429861

106

174

1 8001 2001 8001 2001 8001 200

1 200

1 200

350

DifferentialPSIG

100

DischargePSIG

Hydrostatic TestPressure

PSIG

525

LBS

Approx. ShippingWeight

16

40

40

75

75

KG

7

18

18

34

34

Maximum Recommended PressurePump

SpeedRPM

VIKI

NG P

UMPS

• 48 USGPM (180 LPM)• 100 PSIG

LP-GAS ROTARY PUMPS VikingSeries 690

VIKI

NG P

UMPS

STAINLESS STEEL SANITARYViking POSITIVE DISPLACEMENT PUMPS

Series 400

1. Tri-Lobe Rotors

Tri-lobe rotors are available in the 500 sizes modelsand are supplied as standard equipment on all othermodels.

2. Multi-Lobe Rotors

Supplied as standard equipment in the 500 sizesmodels only and are highly efficient on lower vis-cosity.

3. Twin-Blade Rotors

Large particles, such as fruit in jams or meat in pie fillings.

Viking GENERAL PURPOSEThin Liquid

Model

Series

505X507X510X10101010X10151015X11151115X11201120X20202020X21302130X30403040X3160X

Suction and

Discharge Size

(Inches)1/23/41111 1/21 1/21 1/21 1/2222233446

12.512.522.5

4242424264646464

142142230230320320495

12012080

11015011015075

10075

10011015075

10075

10065

RPM

1 0001 0001 000

870870870870850850850850800800800800600600600

Theoretical

Displacement

USGPM / 100 RPM

Max.

Differential

Pressure

PSIG

1.321.322.304.924.924.924.927.807.807.807.8018.018.028.828.854.054.054.0

Typical

Horsepower

Range1/2 - 1 1/2

1/2 - 21/2 - 51/2 - 51/2 - 51/2 - 51/2 - 5

3/4 - 7 1/23/4 - 7 1/23/4 - 7 1/23/4 - 7 1/2

2 - 152 - 152 - 202 - 20

10 - 3010 - 3010 - 30

USGPM

Max Pump Rating

(at 300 SSU)

ModelNo

S1SS1LS2SS2LS3SS3LS4SS4L

PortSize

Inches111 1/222334

300300300300300300300300

GPM12244590

124248300600

RPM1 1501 150

950950870870700700

Max Recommended

Discharge Pressure

When Handling100SSU Liquid at Rated Speeds

PSIG

Max.Hydrostatic

PressurePSIG

200100200100200100200100

Max.Recommended

oT

oF300300300300300300300300

ApproximateShippingWeight

(Less Power)Pounds

363885

106196214490593

NominalPumpRating

• 500 USGPM• 150 PSIG• 1 million SSU• 150 oC• Non-corrosive• Clean, Hygienic• 1/2 in. thru 6 in.

2’’ MODELS 18 - 143 US GPM



VIKI

NG P

UMPS

POSITIVE DISPLACEMENT PUMPS VikingLinco

150

28

2.9

28

3.7

28

4.1

27

4.8

27

5.3

100

18

2.8

18

3.3

18

3.8

18

4.1

18

4.9

Flow - USGPM

Horsepower

Flow - USGPM

Horsepower

Flow - USGPM

Horsepower

Flow - USGPM

Horsepower

Flow - USGPM

Horsepower

PSI

0

25

50

75

100

Net Wt. 100 lb. • For Relief Valve add 20 lbs

200

41

3.0

40

3.9

39

4.7

38

5.2

38

5.7

54

3.1

53

4.2

52

5.0

51

6.0

50

7.0

91

3.5

89

5.0

87

6.4

85

7.9

84

9.3

300

66

3.2

64

4.4

63

5.4

62

6.7

60

7.9

350

79

3.3

77

4.8

75

6.0

73

7.2

72

8.5

450400

104

3.7

101

5.3

98

6.9

96

8.5

94

10.2

500

117

3.9

114

5.6

111

7.2

108

9.2

106

11.0

550

130

4.0

127

6.0

124

7.7

121

9.9

118

11.7

600

143

4.1

139

6.2

135

8.2

131

10.5

128

12.5

Pump - Rotational Speed (RPM)

250

150

77

1.4

73

3.0

67

4.2

63

5.7

58

6.8

100

50

1.0

45

2.2

42

3.0

39

3.8

35

4.3

Flow - USGPM

Horsepower

Flow - USGPM

Horsepower

Flow - USGPM

Horsepower

Flow - USGPM

Horsepower

Flow - USGPM

Horsepower

PSI

0

25

50

75

100


200

102

1.8

97

3.8

92

5.7

87

7.6

83

9.3

127

2.2

123

4.6

117

7.0

112

9.5

107

12.0

206

3.5

200

7.1

192

11.3

185

15.0

177

19.0

300

158

2.5

151

5.5

144

8.5

138

11.5

132

14.2

350

182

3.0

175

6.2

169

10.0

162

13.5

155

16.8

450400

232

4.0

225

8.0

215

13.0

208

17.4

200

21.8

500

-

-

-

-

-

-

-

-

-

-

550

-

-

-

-

-

-

-

-

-

-

600

-

-

-

-

-

-

-

-

-

-


250

350

182

3.0

175

6.2

169

10.0

162

13.5

155

16.8

300

158

2.5

151

5.5

144

8.5

138

11.5

132

14.2

Flow - USGPM

Horsepower

Flow - USGPM

Horsepower

Flow - USGPM

Horsepower

Flow - USGPM

Horsepower

Flow - USGPM

Horsepower

PSI

0

25

50

75

100


400

206

3.5

200

7.1

192

11.3

185

15.0

177

19.0

232

4.0

225

8.0

215

13.0

208

17.4

200

21.8

306

5.5

296

10.5

287

17.0

278

23.5

268

29.0

500

256

4.5

247

9.0

239

14.2

232

19.2

223

24.2

550

280

5.0

270

9.5

262

15.5

255

21.2

245

26.5

650600

330

6.0

320

11.5

310

18.5

300

25.0

290

31.2

700

-

-

-

-

-

-

-

-

-

-

750

-

-

-

-

-

-

-

-

-

-

800

-

-

-

-

-

-

-

-

-

-


450

• Water, including dirty water, oil, asphalt, paper pulp, molasses,fertilizer slurries, seal coat, crude oil, manure sluries, many mildly abrasive or corrosive liquids. Note : Not suitable for dipolar sol-

vents.

• Bidirectional pump design reduces plumbing costs and can be used with a reversing PTO or hydraulic drive for loading and unloading operations.

• Nitrile rotors and bronze bushings are petroleum resistant with a maximum operating temperature of 200 oF.

Rotors

• Hydrin provides moderate abrasion resistance and working temperatures to 250 oF

• Pentaprene provides high abrasion resistance up to 160 oF• Ultraprene combines high abrasion and temperature

resistance to 300 oF.

• Relief valves are available in 50, 75, and 100 PSIG.

ROPE

R PU

MPS

Roper Pumps MEDIUM PRESSURE PUMPSSeries F •

Pressures to 300 psi •For Metering, Blending, Fuel Supply at Standard Motor Speeds •

SERIES F-1

SERIES F-10

General Performance Information

Approx.Normal Ap. Temp.

Roper Capacity Port Max. Normal LimitPump Range Size Dr. Pump Std. Spec.Series GPM In. H.P. RPM Const. Const.3611 27 - 77 2 8 up to 700 212 oF 400 oF4617 41 - 118 3 12 up to 700 212 oF 400 oF3622 60 - 155 3 15 up to 700 212 oF 400 oF3735 64 - 210 3 21 up to 600 212 oF 400 oF3658 100 - 350 4 40 up to 600 212 oF 400 oF3648 97 - 440 4 35 up to 900 212 oF 400 oF

Materials of ConstructionStandard Available

Housing Cast Iron DuctileIron*

Gears Hardened BronzeSteelAlloy

Bearings Bronze Iron orCarbon

Shaft Hardened StainlessSteel Steel*

* Not Available in all Sizes

Roper Pumps GENERAL PURPOSE PUMPSSeries 3600, 3700, 4600, 4700 •

Pressures to 125 psi •For Mixing, Blending, Recirculating, Transfer •

SERIES F-100

SERIES F-150

SERIES 3600

SERIES 3648

SERIES 3722

SERIES 4622

Jacketed



Roper Capacity Port Max. Normal LimitPump Range Size Dr. Pump Std. Spec.Series GPM In. H.P. RPM Const. Const.F - 1 .6 - 1.5 1/2 1 up to 1800 212 oF 250 oFF - 5 2 - 6 1/2 3.5 up to 1800 212 oF 250 oF

F - 10 3 - 11 3/4 7.5 up to 1800 212 oF 250 oFF - 50 20 - 60 2 15 up to 1200 212 oF 250 oFF - 100 40 - 130 2 1/2 32 up to 1200 212 oF 250 oFF - 300 170 - 320 4 100 up to 900 212 oF 250 oF


Housing Cast Iron -

Gears Steel StainlessSteel*

Bearings Bronze Iron*

Shaft Hardened StainlessSteel Steel*


STAINLESS STEEL PUMPS Roper Pumps• Series 2600, 2700, 26 000, 27 000• Pressures to 100 psi• For Virtually Any Industrial Chemical


Approx.Normal Ap.

Roper Capacity Port Max. Normal Temp.Pump Range Size Dr. Pump LimitSeries GPM In. H.P. RPM26016 6 - 28 1 1/4 3 up to 1800 350 oF26024 8 - 28 1 1/4 3 up to 1200 350 oF26032 13 - 56 2 6 up to 1800 350 oF26064 24 - 54 2 6 up to 900 350 oF2622 32 - 200 3 16 up to 900 350 oF2722 32 - 200 3 16 up to 900 350 oF


Housing 316Stainless -

Steel

Gears Special HardenedHardenable 440

Nickel StainlessStainless Steel*

Steel

Bearings Carbon -

Shaft 316 HardenedStainless 440

Steel StainlessSteel*

* Available in 2622, 2722 only

SERIES 27016 - 064

SERIES 2722



Roper Capacity Port Max. Normal LimitPump Range Size Dr. Pump Std. Spec.Series GPM In. H.P. RPM Const. Const.A - 005 .2 - 2 3/8 .5 up to 3600 212 oF 400 oFA - 01 .4 - 4 3/8 1 up to 3600 212 oF 400 oFA - 03 2 - 11 3/4 3 up to 3600 212 oF 400 oFA - 08 4 - 14 1 1/4 3 up to 1800 212 oF 400 oFA - 16 8 - 29 1 1/4 4 up to 1800 212 oF 400 oFA - 32 16 - 56 2 8 up to 1800 212 oF 400 oF


Housing Cast Iron DuctileIron*

Gears Hardened -Steel

Bearings Bronze Iron orCarbon

Shaft Hardened -Steel


LOW PRESSURE PUMPS Roper Pumps• Series A• Pressures to 150 psi• For Pumping Clean Liquids at Standard Motor Speeds

SERIES 26016 - 064

SERIES 2622

SERIES AM - 02

SERIES AM - 32

SERIES AM - 16

SERIES AP - 32

ROPE

R PU

MPS

TUTH

ILL

Tuthill CAST IRON AND CAST STEELST Series

Tuthill STAINLESS STEELST Series

Model Number

Cast Iron &Cast Steel

Port Size

IN / MM

251.5040

1.5040

2.0050

2.5065

3.0080

3.0080

4.001006.001506.001506.00150

1.00

Nominal CapacityAt Maximum RPM

GPM / LPM Max RPM

1 800

1 800

1 800

1 500

1 500

1 500

1 200

950

750

750

500

Max DifferentialPressure

PSI / BAR

HydrostaticTest Pressure

PSI / BAR

STI / STC 009

STI / STC 015

STI / STC 030

STI / STC A50

STI A80

STC B80

STI / STC 135

STI / STC 225

STI / STC 275

STI / STC 350

STI / STC 550

934155730114501898030380303135511225852275104135013255502082

2001420014200142001420014200142001420014150101501015010

30021

30021

30021

30021

30021

30021

30021

30021

30021

30021

30021

Model Number

Cast Iron &Cast Steel

Port Size

IN / MM

251.0025

1.5040

1.5040

1.5040

2.0050

3.0080

3.0080

3.0080

6.001506.00150

1.00

Nominal CapacityAt Maximum RPM

GPM / LPM Max RPM

1 800

1 800

1 200

1 200

1 200

1 000

1 000

800

640

500

500

Max DifferentialPressure

PSI / BAR

HydrostaticTest Pressure

PSI / BAR

STS A03

STS A06

STS 009

STS 015

STS 030

STS A50

STS B80

STS 135

STS 225

STS 275

STS 350

3.61462362310382076331265320290341150568183694233883

200142001415010150101501015010150101501015010100

7100

7

30021

30021

30021

30021

30021

30021

30021

30021

30021

30021

30021

TUTH

ILL

PROCESS PUMPS TuthillHD Series

Industrial Duty500 SSU / 108 Centipoise

0 psi / 0 bar 50 psi / 3.4 bar 100 psi / 6.9 bar 150 psi / 10.3 barSize RPM GPM LPM HP KW GPM LPM HP KW GPM LPM HP KW GPM LPM HP KW

45 2.5 9 .5 .37 1.9 7 .5 .37 1.4 5 .5 .37 .9 3 .5 .37100 5.6 21 .5 .37 5 19 .5 .37 4.5 17 .75 .55 4 15 .75 .55

30A 155 8.8 33 .5 .37 8 30 .75 .55 7.5 28 1 .75 7 26 1 .75230 12.8 48 .5 .37 12.2 46 .75 .55 11.7 44 1.5 1.1 11.2 42 1.5 1.1350 19.5 74 .75 .55 18.5 70 1.5 1.1 17.9 68 2 1.5 16.8 64 2 1.545 6 23 1.5 1.1 5 19 1.5 1.1 4 15 1.5 1.1 3 11 1.5 1.1100 15 57 1.5 1.1 14 53 1.5 1.1 13 49 2 1.5 12 45 3 2.2

2A - 70A 155 23 87 1.5 1.1 22 83 2 1.5 21 79 3 2.2 20 76 5 3.7230 34 129 1.5 1.1 33 125 3 2.2 32 121 5 3.7 31 117 7.5 5.5350 52 197 2 1.5 51 193 5 3.7 50 189 7.5 5.5 49 185 10 7.545 13 49 1.5 1.1 11 42 1.5 1.1 9 34 1.5 1.1 7 26 2 1.5100 30 114 1.5 1.1 28 108 2 1.5 26 98 3 2.2 24 91 5 3.7

3A - 120A 155 46 174 1.5 1.1 44 167 3 2.2 42 159 5 3.7 40 151 7 5.5230 69 261 2 1.5 67 254 5 3.7 65 246 7.5 5.5 63 238 10 7.5350 105 397 3 2.2 103 390 7 5.5 101 382 15 11 99 375 15 1145 31 117 3 2.2 27 102 3 2.2 24 91 5 3.7 21 79 5 3.7100 70 265 3 2.2 66 250 5 3.7 63 238 7 5.5 60 227 7 5.5

330 155 108 409 3 2.2 105 397 7 5.5 102 386 15 11 99 375 20 15230 161 609 5 3.7 157 594 10 7.5 154 583 20 15 151 572 25 18.5350 246 931 7.5 5.5 242 916 15 11 238 901 25 18.5 234 886 30 2245 66 250 5 3.7 61 231 5 3.7 56 212 7.5 5.5 51 193 10 7.5100 147 556 5 3.7 142 537 7 5.5 137 519 15 11 132 500 20 15

600 155 228 863 5 3.7 223 844 15 11 218 825 25 18.5 213 806 30 22230 339 1283 10 7.5 334 1264 20 15 329 1245 30 22 324 1226 40 30350 516 1953 15 11 511 1934 30 22 - - - - - - - -

Standard Duty500 SSU / 108 Centipoise

0 psi / 0 bar 50 psi / 3.4 bar 100 psi / 6.9 bar 150 psi / 10.3 barSize RPM GPM LPM HP KW GPM LPM HP KW GPM LPM HP KW GPM LPM HP KW

45 .38 1.4 .5 .37 .29 1.1 .5 .37 .2 .8 .5 .37 .12 .5 .5 .37100 .86 3.3 .5 .37 .77 2.9 .5 .37 .68 2.6 .5 .37 .6 2.3 .5 .37

5A 155 1.3 4.9 .5 .37 1.2 4.5 .5 .37 1.1 4.2 .5 .37 1 3.8 .5 .37230 1.9 7.2 .5 .37 1.8 6.8 .5 .37 1.7 6.4 .5 .37 1.6 6.1 .5 .37350 3 11.4 .5 .37 2.9 11 .75 .55 2.8 10.6 .75 .55 2.7 10.2 .75 .55575 4.9 18.5 .75 .55 4.8 18.2 .75 .55 4.7 17.8 1 .75 4.6 17.4 1.5 1.145 .64 2.4 .5 .37 .5 1.9 .5 .37 .37 1.4 .5 .37 .24 .9 .5 .37

100 1.4 5.3 .5 .37 1.2 4.5 .5 .37 1.1 4.2 .5 .37 1 3.8 .5 .3710 155 2.2 8.3 .5 .37 2 7.6 .5 .37 1.9 7.2 .5 .37 1.8 6.8 .5 .37

230 3.2 12.1 .5 .37 3 11.4 .75 .55 2.9 11 .75 .55 2.8 10.6 .75 .55350 5 18.9 .75 .55 4.8 18.2 .75 .55 4.7 17.8 .75 .55 4.6 17.4 .75 .55575 8.2 31 1 .75 8 30.3 1.5 1.1 7.9 29.9 1.5 1.1 7.8 29.5 1.5 1.145 1.1 4.2 .5 .37 .96 3.6 .5 .37 .73 2.8 .5 .37 .5 1.9 .5 .37

100 2.8 10.6 .5 .37 2.6 9.8 .5 .37 2.3 8.7 .5 .37 2.1 7.9 .5 .3716 155 4.4 16.7 .5 .37 4.1 15.5 .5 .37 3.9 14.8 .5 .37 3.7 14 .75 .55

230 6.6 25 .5 .37 6.3 23.8 .75 .55 6.1 23.1 .75 .55 5.9 22.3 .75 .55350 10 37.9 .75 .55 9.7 36.7 1 .75 9.5 36 1 .75 9.3 35.2 1.5 1.1575 16.5 62.5 1 .75 16.2 61.3 1.5 1.1 16 60.6 2 1.5 15.8 59.8 3 2.245 2.5 9 .5 .37 1.9 7 .5 .37 1.4 5 .5 .37 .9 3 .5 .37

100 5.6 21 .5 .37 5 19 .5 .37 4.5 17 .75 .55 4 15 .75 .5525A 155 8.8 33 .5 .37 8 30 .75 .55 7.5 28 1 .75 7 26 1 .75

230 12.8 48 .5 .37 12.2 46 .75 .55 11.7 44 1.5 1.1 11.2 42 1.5 1.1350 19.5 74 .75 .55 18.5 70 1.5 1.1 17.9 68 2 1.5 16.8 64 2 1.545 6 23 1.5 1.1 5 19 1.5 1.1 4 15 1.5 1.1 3 11 1.5 1.1

100 15 57 1.5 1.1 14 53 1.5 1.1 13 49 2 1.5 12 45 3 2.265 155 23 87 1.5 1.1 22 83 2 1.5 21 79 3 2.2 20 76 5 3.7

230 34 129 1.5 1.1 33 125 3 2.2 32 121 5 3.7 31 117 7.5 5.5350 52 197 2 1.5 51 193 5 3.7 50 189 7.5 5.5 49 185 10 7.545 11 42 1.5 1.1 10 38 1.5 1.1 9 34 1.5 1.1 8 30 1.5 1.1

125A 100 25 95 1.5 1.1 24 91 2 1.5 23 87 3 2.2 22 83 3 2.2& 155 38 144 1.5 1.1 37 140 3 2.2 36 136 5 3.7 35 132 5 3.7125H 230 57 216 2 1.5 56 212 5 3.7 55 208 7.5 5.5 54 204 7.5 5.5

350 87 329 3 2.2 86 326 7 5.5 85 322 15 11 84 318 15 11

• High viscosity• High pressure• Run dry without damage• High temperature• For metering or transfer• High vacuum• External bearing chamber• Slow speed for longer wear and lower shear• Reversible• Wide range of drives and mountings

WIL

LIAM

S RO

TOCA

NRotocan GEAR PUMP

Models

• RC 100 • RC 125• RC 150 • RC 200• RC 200 • RC 250• RC 300 • RC 400• RC 500 • RC 600• RC 601 • RC 800

RC SERIES

• RC - B1

• Cast iron construction with bronze bushing and packed gland

RS SERIES

RS - C2 •

316 stainless steel construction with carbon bushings •and teflon packed gland

Williams ROTARY PISTON PUMPS

• Pour produits à haute viscosité & corrosifs• For viscous & corrosifs liquids

• Asphalte liquide • Glucose• Liquid asphalte

• Acide sulfurique • Mélasse• Sulphuric acid • Molasse

• Peinture • Pâtes lourdes• Paint • Heavy paste

SD Pump

Disponible en fer, bronze ou acier •Available in iron, bronze or steel •

Rotor assembly • SD Pump

View of SD showing flow

asybcoviking pump gear pump viking series 115 canadian • ideally suited for direct drives at...

Documents