ASSIGNMENT ON DYEING AND PRINTING(3D PRINTING)

SUBMITTED BY NITIN UKE

MFTECH

3D PRINTING

• Designer Daniel Widrig and Dutch fashion designer Iris van Herpen introduces 3D printing techniques into the realm of haute couture fashion design

INTRODUCTION

• 3D printing is a method of converting a virtual 3D model into a physical object

• 3d printing is a category of Rapid prototyping technology

Rapid Prototyping

Rapid prototyping takes virtual designs , transforms them into thin cross section and then creates physical cross in space until the model is finished

TECHNOLOGIES

• Selective laser sintering (SLS)• Fused deposition modeling (FDM)• Stereo lithography (SLA)• Multi jet Modeling (MJM)• Laminated object manufacturing (LOM)• Electron Beam Melting (EBM)• Object poly jet modeling• 3D printing

Selective Laser Sintering

• Plastic powders are laid flat across a build platform and the 2-Dimensional bitmap image is drawn into the powder using extremely hot laser energy to melt the powder

Stereo lithography (SLA)

• Lower power ultraviolet light from a laser draws the 2-Dimensional bitmap image into liquid ultraviolet curable resin to create a hardened image.

Fused Deposition Modelling (FDM)

• Hard plastic wound onto a spool is fed under pressure into a heated head that contains nozzles.

• These nozzles are opened and head moves across build platform to deposit the bitmap image.

Multi-Jet Modeling

• Fast• Office-friendly: non-toxic materials, small

footprint, low odor.• Models are primarily for appearance use.• Multi-Jet Modeling™ uses a 96-element print

head to deposit molten plastic for layering.

3D printing

• 3D printing consists of an inkjet printing system

• Layers of a fine powder are selective bonded by printing an adhesive from the inkjet print head in the shape of each cross section as determined by a CAD file

3D printing

• It is also recognized as the fastest method • These photopolymer phase machines use an

ultraviolet flood lamp mounted in the print head to cure each layer as it is deposited

3D printing

• The technology uses ultraviolet beams to fuse layers of powdered, recyclable thermoplastic, and the process produces almost no waste

The New Wave of 3D Printed Garments

The New Wave of 3D Printed Garments

• Digital technologies have dramatically effected the way patterns for textiles are designed and developed

The New Wave of 3D Printed Garments

• Romanian fashion designer Alina Ene combines the analog with the digital to create 3D printed garments that glow under ultra-violet light

The New Wave of 3D Printed Garments

• Using long exposure photography techniques, Ene fashions sculpted garments in vivid and abstract photographic prints

• Her garments truly come to life at night where under UV light on the dance floor the patterns dramatically begin to glow

ADVANTAGES

• Clean process • Wastage of material is negligible• Good for job production• 3D printing technology requires no toxic

chemicals like those used in stereo lithography printing technology

ADVANTAGES

• It is also the fastest printing method• More affordable• easier to use than other technologies

DISADVANTAGES

• Process is very slow• Components do not have enough strength• Process is not mass production

REFERENCES

• http://www.weareallmagpies.bolgspot.com/2010/11/3d-printing-in-fashion

• http://boingboing.net/2010/07/29/3d-printed-clothing.html

THANK YOU