assembly manual assembly kit yo-yo desk go · [email protected]+44 01793 575 082 ® please...

4
We highly recommend is assembled by two people together. Please first read all instructions carefully before assembling. Retain this manual for future reference. The specifications may vary slightly from the illustrations and are subject to change without notice. CAUTION Assembly Manual ® Yo-Yo DESK GO Screwdriver The following items are included in your , please check you have each of them. If there are any tools or components missing, please contact customer services on +44 01793 575 082. ASSEMBLY KIT Page 2 / 8 Monitor Arm 1 x Top Cap 1 x Worktop 1 x Base Plate 1 x Allen Keys Allen Keys Allen Keys Screws M4x12 Screws M5x12 Screws M4x16 Screws M5x16 Screws Screws Screws Screw Collars Screw Collars Monitor Pole 1 x 4 x 4 x 4 x 4 x 4 x 4 x 1 x 4mm 3 x 4 x 4 x 4 x A B C D F M N O P Q R S G H I K L J E 1 x 5mm 1 x 6mm D5 D8 1 x 1 F J A C ASSEMBLY STEP 1 CAUTION WEIGHT TOLERANCE LEVEL WARNING TWO PEOPLE REQUIRED 1) Align Base Plate with the Monitor Pole & then screw them together. We recommend a combined weight of desk equipment (ie laptop & monitor screen of 5 - 7kg) for optimal counter- balance. Below 5kg may make the transition between sitting & standing positions more stiff. The Maximum weight tolerance is 7kg. Please place the Yo-Yo DESK GO on a surface suitable to hold the entire base of the Yo-Yo DESK GO otherwise you may cause damage when operating the Yo-Yo DESK GO. Yo-Yo DESK GO +44 01793 575 082 [email protected] ®

Upload: others

Post on 19-Aug-2020

0 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: Assembly Manual ASSEMBLY KIT Yo-Yo DESK GO · sales@yo-yodesk.co.uk+44 01793 575 082 ® Please place the Yo- o Desk GO on a surface suitable to hold the entire base of the Yo- o Desk

We highly recommend Yo-YoDesk GO is assembled by two people together. Please first read all instructions carefully before assembling. Retain this manual for future reference. The specifications may vary slightly from the illustrations and are subject to change without notice.

CAUTION

Assembly Manual

®

®

®

Yo-Yo DESK GO

Screwdriver

The following items are included in your Yo-YoDesk GO, please check you have each of them. If there are any tools or components missing, please contact customer services on +44 01793 575 082.

ASSEMBLY KIT

Page 2 / 8

Monitor Arm1 x

Top Cap1 xWorktop1 x

Base Plate1 xAllen Keys

Allen Keys

Allen Keys

Screws M4x12ScrewsM5x12ScrewsM4x16ScrewsM5x16Screws

Screws

Screws

Screw Collars

Screw CollarsMonitor Pole

1 x

4 x

4 x

4 x

4 x

4 x

4 x

1 x 4mm

3 x

4 x

4 x

4 xA B

C

D F M

N

O

P

Q

R

S

G

H

I

K

L

JE

®

1 x 5mm

1 x 6mm

D5

D8

1 x

1

®

®

F J

A

C

®

ASSEMBLY STEP 1

CAUTION

WEIGHT TOLERANCE LEVEL

WARNINGTWO PEOPLE REQUIRED

1) Align Base Plate with the Monitor Pole & then screw them together.

We recommend a combined weight of desk equipment (ie laptop & monitor screen of 5 - 7kg) for optimal counter- balance. Below 5kg may make the transition between sitting & standing positions more stiff.

The Maximum weight tolerance is 7kg.

Please place the Yo-Yo DESK GO on a surface suitable to hold the entire base of the Yo-Yo DESK GO otherwise you may cause damage when operating the Yo-Yo DESK GO.

Yo-Yo DESK GO

+44 01793 575 [email protected]

®

Page 2: Assembly Manual ASSEMBLY KIT Yo-Yo DESK GO · sales@yo-yodesk.co.uk+44 01793 575 082 ® Please place the Yo- o Desk GO on a surface suitable to hold the entire base of the Yo- o Desk

ASSEMBLY STEP 2

When attaching the Monitor Arm, avoid excessive screwdriver force. Excessive force may prevent or restrict the up/down movement of your monitor.

CAUTION

Page 3 / 8®

2

2) i Fit the Monitor Arm over the Monitor Pole.Place the Top Cap on top of the Monitor Pole.ii

J

+44 01793 575 [email protected]

®

ASSEMBLY STEP 3

may drop down when pressure is applied.

CAUTION

Page 4 / 8®

3a

3) i Insert the Four Screws at the back of the Worktop. Screw them in partly, avoid screwing in too tightly to allow some free movement.

Place Worktop over the bottom of the Monitor Pole, aligning the Four Screws with the Monitor Pole, & then tighten carefully.

ii

BI

H

3b

I

H

I

Do not press lever to avoid pole rising. Please tighten firmly. If not, Worktop

+44 01793 575 [email protected]

®

Page 3: Assembly Manual ASSEMBLY KIT Yo-Yo DESK GO · sales@yo-yodesk.co.uk+44 01793 575 082 ® Please place the Yo- o Desk GO on a surface suitable to hold the entire base of the Yo- o Desk

ASSEMBLY STEP 4

Always test the Up/Down Lever by pressing inwards once it has been attached.

CAUTION

Page 5 / 8®

4) i Screw in the Up/Down Lever placing it underneath the RIGHT SIDE of the Worktop.

G

4

+44 01793 575 [email protected]

®

®

ASSEMBLY STEP 5

Avoid excessive screwdriver force as this may restrict full swivel, tilt and rotation.

CAUTION

Page 6 / 8®

5a

5c

5b

5a,b & c) Attach the monitor on to the Monitor Arm.

K

Q

M/N O/P

QR

+44 01793 575 [email protected]

®

Page 4: Assembly Manual ASSEMBLY KIT Yo-Yo DESK GO · sales@yo-yodesk.co.uk+44 01793 575 082 ® Please place the Yo- o Desk GO on a surface suitable to hold the entire base of the Yo- o Desk

Avoid pushing down from the front of the Worktop. Always place hand to the back to maintain optimal stability when moving up/down.

CAUTION

Page 7 / 8®

ASSEMBLY STEP 6

6

6) To operate, use right hand to push Up/Down Lever in & if necessary when moving downwards apply pressure with your LEFT HAND to the back of the Worktop. Apply pressure on the left corner pressing the lever simultaneously.Sufficient weight on the Worktop should limit the necessity to do this. Pads can be placed on the bottom of the base for better adherence to the surface.

®

+44 01793 575 [email protected]

®

Please place the Yo-Yo Desk GO on a surface suitable to hold the entire base of the Yo-Yo Desk GO otherwise you may cause damage when operating the Yo-Yo Desk GO.

When attaching the Monitor Arm, avoid excessive screwdriver force. Excessive force may prevent or restrict the up/down movement of your monitor.

Please tighten firmly. If not, Worktop may drop down when pressure is applied.Always test the Up/Down Lever by pressing inwards once it has been attached.

Avoid excessive screwdriver force as this may restrict full swivel, tilt and rotation.

Avoid pushing down from the front of the Worktop. Always place hand to the back to maintain optimal stability when moving up/down.

CAUTION

CAUTION

CAUTION

CAUTION

CAUTION

Page 8 / 8

+44 01793 575 [email protected]

®

Yo-Yo DESK GOYo-Yo DESK GO

Yo-Yo DESK GO

®