PAGE 1 OF 2STOP DON’T RETURN TO STORE!

COURTYARD CREATIONS INC.

#5 BOLT M6*14

1

958 14

ATTENTION:Make sure that each bolt needed for all steps matches the corresponding figure to ensure proper assembly.

STEP 1:Open the seat/back assembly (#1) and place it on to a non-abrasive surface, such as a carpet. See Figure 1.

NOTE:The bolts on the seat/back assembly (#1) should be loose before assembling the chair. See Figure 1.

STEP 2:At the rear of the seat/back assembly (#1), fasten the seat and the back by using bolt (#5) and washer (#8). Keep the bolts loose. See Figure 2.

FIGURE 2

1

FIGURE 1

HEX.KEY WRENCH 4MM

HEX.KEY WRENCH 6MM

BOLT CAP M6

BOLT CAP M6

BOLT CAP

WASHER d6.5*D13*1.0

BOLT M6*35

BOLT M6*14

BOLT M6*14

SUPPORT BRACE

RIGHT LEG

LEFT LEG

17KAA0101----Y4

SEAT/BACK ASSEMBLY

18000337002

17KAA0201----Y4

18000337006

17C33A0712001Y4

17FA05040301-Y4

18000337004

17C02A0755131Y4

17C33A0722001Y4

62KTS816HQ101

KTS816H-CS03

KTS816H-CS01

KTS816H-CS02

1

1

2

2

10

2

8

13

11

12

9

10

8

7

2

6

1

1

1

1

6

5

3

4

2

PARTS LISTPARTNO. MATERIAL CODE PART Q’TY

1

KTS816H-WM

ASSEMBLY INSTRUCTIONSATTENTION: THIS PRODUCT IS NOT FOR COMMERCIAL USE INTENDED FOR RESIDENTIAL USE ONLY.

SERVICE CENTER TOLL FREE NO. TEL: 1-877-539-7436 FAX: 1-877-539-7439

Use the correct bolts as indicated. Do not tighten any of the bolts until is completely assembled.Do not discard of any of the packaging until you have checked that you have all of the parts and fittings required. Keep children away during assembly. This item contains small parts that can be swallowed by children. Children should always be under direct adult supervision while using this product. Retain these assembly instructions for future reference.Quote the following FQC NO. when contacting the service center.

!!

!

!

!

STEP 8:Tighten all of the bolts on the seat assembly (#1). After all of the bolts have been tightened completely, cover them with bolt caps (#9, #10, and #11). See Figure 8.

STEP 7:Turn the assembled parts to their upright position. At the rear of the chair, fasten the seat/back assembly (#1) to the legs (#2 and #3) by using bolts (#7) andwashers (#8). See Figure 7.

STEP 6:At the front brace of the seat/back assembly (#1), fasten the seat/backassembly (#1) to the legs (#2 and #3) by using bolts (#6). Keep the bolts loose. See Figure 6.

STEP 5:Insert the right leg (#3) into the support brace (#4). Fasten the right leg (#3) to the support brace (#4) and the seat/back assembly (#1) by using bolts (#5) and washers (#8). Keep the bolts loose. See Figure 5.

FIGURE 8

STEP 3:At the front brace of the seat/back assembly (#1), fasten the seat/back assembly (#1) to the left leg (#2) by using bolt (#5) and washer (#8). Keep the bolts loose. See Figure 3.

STEP 4:Insert the support brace (#4) into the left leg (#2). The holes in the support brace (#4) must be facing the inside of the chair. Fasten the left leg (#2) to the support brace (#4) by using bolt (#5) and washer (#8). Keep the bolts loose. See Figure 4.

Cleaning and Maintenance• Wash frame parts and fabric with mild soap and water, rinse thoroughly, Dry frame completely. Do not use bleach, acid, or other solvents on the fabric or frame parts.• The chair fabric may be washed on the surface only by using mild soap and water if necessary. Commercial foaming upholstery cleaner may also be used.• We recommend the use of furniture covers to protect your chair when not in use.• Inspect and tighten all bolts or fasteners on a regular basis to ensure the proper performance and safety of your chair.• In order to prolong the life and beauty of your chair, we recommend that it be stored in a dry and protected area during off season periods.

#7 BOLT M6*35

35

34297

1

8

FIGURE 7

#5 BOLT M6*14

148

59

4

2

1

FIGURE 4

#5 BOLT M6*14

142

851

9FIGURE 3

FIGURE 5

PAGE 2 OF 2STOP DON’T RETURN TO STORE!

FIGURE 6

NOTE:The labels marked “L” and “R” on the legs (#2 and #3) should coincide with Figure 3 - Figure 5 to ensure proper assembly.

R

L

9

9

11

1

2

3

4

885 59 9

14

#5 BOLT M6*14

1

3

2

4

106

14

#6 BOLT M6*14

L

The store where you made your purchasedoes not stock parts for this item.

If you need parts,whether they are missing or damaged,

STOP!Missing A Part?

No Need To Go Back ToThe Store

Call us between 9:00 AM and 4:30 PMEastern Time Monday through Friday

Call Toll Free:TEL: 1-877-539-7436FAX: 1-877-539-7439

READ THESE INSTRUCTIONS COMPLETELY BEFORE STARTING ASSEMBLY SEPARATE AND IDENTIFY ALL PARTS, MAKING SURE THAT YOU HAVE ALL OF THE PARTS LISTED.IF YOU DO NOT LOCATE ALL OF THE PARTS LISTED, INSPECT THE PACKING MATERIAL FOR SMALL PARTS THAT MAY HAVE BECOME SEPARATED DURING SHIPMENT.IF YOU EXPERIENCE ANY DIFFICULTY DURING ASSEMBLY OR IF ANY PARTS ARE MISSING OR DAMAGED, CALL THE HELP LINE AT 1-877-539-7436 BEFORE RETURNING THIS ITEM TO THE STORE.PROVIDE THE FOLLOWING INFORMATION WHEN CALLING:1-MODEL NUMBER OF THE PRODUCT.2-PART NUMBER AND MATERIAL CODE OF THE PART FROM THE PARTS LIST.MOST PROBLEMS CAN BE RESOLVED WITHOUT RETURNING THIS PRODUCT TO THE RETAILER.