assembly - black & deckerservice.blackanddecker.com.au/pdmsdocuments/eu/docs/...black &...

FUNCTIONAL DESCRIPTION - Figure A 1. On/off switch 2. Lock-off button 3. Charging socket 4. Shoe 5. Blade clamp release lever 6. Charger 7. Wall mounting bracket 8. Saw blade storage 9. LED Charging Indicator 1 2 3 4 5 A 6 7 8 9 B C D 10 3 7 10 ASSEMBLY HANGING THE WALL MOUNTING BRACKET Use the hardware provided only if hanging on conventional hollow wall construction such as sheet rock or plaster walls. If not hanging on conventional sheet rock or plaster walls, please use the appropriate fasteners for that material. • Locate the charging base within reach of an electrical outlet. • Mark the position of both hang holes. • Drill appropriate sized holes. • Insert supplied hardware through hang holes and attach bracket to wall. Check to see that the charging base is firmly attached to the wall so it will not pull out. • Plug in and place the product in position. NOTE: Avoid damaging the cord while fixing the mounting bracket to the wall. ADDENDUM TO CHS600-XE INSTRUCTIONS FOR AUSTRALIA AND NEW ZEALAND ONLY Charging base use and wall mounting. New Zealand Black & Decker 5 Te Apunga Place Mt. Wellington. Auckland 1060 Tel. +64 9 259 1111 Fax. +64 9 259 1122 Page 1 of 1 Sheet Number

Upload: others

Post on 09-Aug-2020

2 views

Category:

Documents

0 download

Report

Download

Embed Size (px):

TRANSCRIPT

Page 1: ASSEMBLY - Black & Deckerservice.blackanddecker.com.au/PDMSDocuments/EU/Docs/...Black & Decker 5 Te Apunga Place Mt. Wellington. Auckland 1060 Tel. +64 9 259 1111 Fax. +64 9 259 1122

FUNCTIONALDESCRIPTION - Figure A

1. On/off switch2. Lock-off button3. Charging socket4. Shoe5. Blade clamp release lever6. Charger7. Wall mounting bracket8. Saw blade storage9. LED Charging Indicator

B C

ASSEMBLYHANGING THE WALL MOUNTING BRACKET Use the hardware provided only if hanging on conventional hollow wall construction suchas sheet rock or plaster walls. If not hanging on conventional sheet rock or plaster walls,please use the appropriate fasteners for that material.

• Locate the charging base within reach of an electrical outlet.• Mark the position of both hang holes. • Drill appropriate sized holes.• Insert supplied hardware through hang holes and attach bracket to wall. Check to seethat the charging base is firmly attached to the wall so it will not pull out. • Plug in and place the product in position. NOTE: Avoid damaging the cord while fixing the mounting bracket to the wall.

ADDENDUM TO CHS600-XE INSTRUCTIONS FOR AUSTRALIA AND NEW ZEALAND ONLY Charging base use and wall mounting.

New ZealandBlack & Decker5 Te Apunga PlaceMt. Wellington.Auckland 1060

Tel. +64 9 259 1111Fax. +64 9 259 1122

Page 1 of 1Sheet Number

259 BB Salopette

257 - 259 THE VALE - Savills UKcommercialsearch.savills.co.uk/content/assets/6269/257-259 The Vale... · 5 257-259 THE VALE, ACTON, W3 7QS 257-259 THE ... railing UNIT FLOOR TYPE

RESEARCH REPORT 259

Compendi di clinica odontoiatrica...The modiﬁed trephine/osteotome sinus augmentation technique: technical considerations and discussion of indications. Implant Dent. 2001;10(4):259-64

Henderson, Texasvisithendersontx.com/wp-content/uploads/2013/08/78824_Henderson...Henderson Amarillo 287 I-20 Ft. Worth Dallas 259 I-20 79 259 64 79 59 Houston Austin I-10 I-35 San

Osprey - Men at Arms 259 - Mamluks 1250-1517(Osprey Maa 259)

CLM3820 - BLACK+DECKERservice.blackanddecker.com.au/.../EU/Docs//docpdf/clm3820_t1_gb.pdf · ENGLISH (Original instructions) Intended use Your Black & Decker mower has been designed

259-421-5 EINECS - MASTER INVENTORY 259-449-8 259-421 …259-421-5 EINECS - MASTER INVENTORY 259-449-8 1 EC_2594215_2605195 259-421-5 54979-21-4 dichlór(3-chlórpropyl)propylsilán