asnu catalog 10 09
TRANSCRIPT
-
Copyright 2009 ASNU Corporation All Rights Reserved
IMPORTANT
Many injectors look alike. The illustrations shown in this catalogue are the best possible representations & should be used
only as a guide. Prior to selecting injector components & before disassembling, always inspect the injector to be serviced.
Match & select the components with the injector. Ensuring they are suitable for use.
Side Feed Injectors
NISSAN CFI
SINGLE UNIT
BOSCH
Use Test Adapter 2 2-15597
(single block) or
Test Adapter 2-15528 (twin block)
2-15322
O-RING (UPPER)
2-15306
FILTER
2-15321
O-RING (LOWER)
2-15597
(single block w/harness)
2-15528
(twin block w/harness)
2222----15669156691566915669 CUPCUPCUPCUP (Bosch Style Only)(Bosch Style Only)(Bosch Style Only)(Bosch Style Only)
Section 4 Page Section 4 Page Section 4 Page Section 4 Page 16161616
-
Copyright 2009 ASNU Corporation All Rights Reserved
IMPORTANT
Many injectors look alike. The illustrations shown in this catalogue are the best possible representations & should be used
only as a guide. Prior to selecting injector components & before disassembling, always inspect the injector to be serviced.
Match & select the components with the injector. Ensuring they are suitable for use.
Side Feed Injectors
CHRYSLER
CFI
SINGLE UNIT
BOSCH
(LONG VERSION) 2-15597
(single block)
or
Test Adapter 2-15528
(twin block)
2-15065
FILTER
2-15322 O-RING (UPPER)
2-15321 O-RING (LOWER)
2-15669
2-15597 (single block w/harness)
2-15528 (twin block w/harness)
2222----15669156691566915669 CUPCUPCUPCUP (Bosch Style Only)(Bosch Style Only)(Bosch Style Only)(Bosch Style Only)
Section 4 Page Section 4 Page Section 4 Page Section 4 Page 17171717
-
Copyright 2009 ASNU Corporation All Rights Reserved
IMPORTANT
Many injectors look alike. The illustrations shown in this catalogue are the best possible representations & should be used
only as a guide. Prior to selecting injector components & before disassembling, always inspect the injector to be serviced.
Match & select the components with the injector. Ensuring they are suitable for use.
Side Feed Injectors
SUZUKI
MONOPOINT
DENSO
Use Test Adapter 2-15525
(single block)
2-15027
O-RING
2-15026
O-RING
REPLACEMENT FILTER CURRENTLY
NOT AVAILABLE DO NOT REMOVE
FILTER
2-15114
DUST CAP
2-15525
ADAPTER BLOCK WITH CUSTOM HARNESS
Section 4 Page Section 4 Page Section 4 Page Section 4 Page 18181818
-
Copyright 2009 ASNU Corporation All Rights Reserved
IMPORTANT
Many injectors look alike. The illustrations shown in this catalogue are the best possible representations & should be used
only as a guide. Prior to selecting injector components & before disassembling, always inspect the injector to be serviced.
Match & select the components with the injector. Ensuring they are suitable for use.
Vortec Injectors
Use Test Adapter 2-15631 (tests &
cleans complete assembly )
Connect injectors with 2-15629
Universal Harness
GM VORTEC
4.3L V-6 & 5.7L CPI
SPRAYING SECURING FLOWING
2-15631 Test Adapter Kit
Includes plastic cleaning tray (see below) for ultrasonic cleaning of individual
injector coils & frame mount shown below.
Injector components not available at this time
2-15631
Test Adapter Stainless Steel
Frame in Anodized Aluminum
Rail Complete with cleaning
tray
2-15660
Cleaning Tray
2-15629
Vortec Harness
Section 5 Page Section 5 Page Section 5 Page Section 5 Page 1111
-
Copyright 2009 ASNU Corporation All Rights Reserved
IMPORTANT
Many injectors look alike. The illustrations shown in this catalogue are the best possible representations & should be used
only as a guide. Prior to selecting injector components & before disassembling, always inspect the injector to be serviced.
Match & select the components with the injector. Ensuring they are suitable for use.
GM VORTEC
4.3L V-6 CPI
MODELS 92-95
Use Test Adapter 2-15630
(tests complete assembly)
ASNU 108A
O-RING Early style GM Vor-
tex 4.3L
ASNU 108B
O-RING Early style GM Vor-
tex 4.3L
ASNU 108C
O-RING Early style GM
Vortex 4.3L
ASNU 108D
O-RING Early style GM Vor-
tex 4.3L
ASNU 108E
O-RING Early style GM
Vortex 4.3L
2-15630
Test Adapter Kit
ASNU 108T
Cleaning Tray
(optional)
Vortec Injectors
Section 5 Page Section 5 Page Section 5 Page Section 5 Page 2222
-
Copyright 2009 ASNU Corporation All Rights Reserved
IMPORTANT
Many injectors look alike. The illustrations shown in this catalogue are the best possible representations & should be used
only as a guide. Prior to selecting injector components & before disassembling, always inspect the injector to be serviced.
Match & select the components with the injector. Ensuring they are suitable for use.
Accessories, Components and Adaptors
2-15627
BIO-CLEAN ULTRASONIC CLEANING FLUID
5 LITER BOTTLE
2-15593
FLOW-RITE
CALIBRATION FLUID
5 LITER BOTTLE
ASNU 46
ADAPTER COUPLING HITACHI INJECTORS
USED ON AUDI QUATTRO
2-15532
8MM FEMALE ADAPTER COUPLING FOR
8MM MALE COLD START INJECTOR
2-15533
10MM MALE ADAPTER COUPLING
FOR 10MM FEMALE COLD START
INJECTOR
2-15534
ADAPTER COUPLING COLD START
INJECTOR HOSE TYPE (12-13MM)
2-15535
10MM FEMALE ADAPTER COUPLING
FOR 10MM MALE COLD START
INJECTOR
2-15511
ADAPTER COUPLING TOP FEED MULTI-
PORT INJECTORS WITH FILTER
BASKET REMOVED
2-15512
SMALL O-RING FOR 2-15511 COUPLING
Section 6 Page Section 6 Page Section 6 Page Section 6 Page 1111
-
Copyright 2009 ASNU Corporation All Rights Reserved
IMPORTANT
Many injectors look alike. The illustrations shown in this catalogue are the best possible representations & should be used
only as a guide. Prior to selecting injector components & before disassembling, always inspect the injector to be serviced.
Match & select the components with the injector. Ensuring they are suitable for use.
2-15513
LARGE (TOP) O-RING FOR ASNU ADAPTER
COUPLING
2-15514
8MM MALE ADAPTER COUPLING FOR 10MM
FEMALE CIS (K-JET)
2-15515
12MM FEMALE ADAPTER COUPLING
FOR 12MM MALE CIS (K-JET)
ASNU 56
ADAPTER COUPLING FOR SLIM TOP
SIEMENS GDI INJECTORS TESTS INJEC-
TORS WITHOUT REMOVING INLET FILTER
2-15536
ADAPTER COUPLING BOSCH, LUCAS,
WEBER, MARELLI, SIEMENS TESTS
INJECTORS WITHOUT REMOVING INLET
FILTER
2-15537
ADAPTER COUPLING TESTS
MULTIPORT INJECTORS WITH FUEL
HOSE INSTALLED
2-15538
ADAPTER COUPLING SLIM TYPE DENSO
TESTS INJECTORS WITHOUT REMOVING
INLET FILTER
2-15502
UNIVERSAL INJECTOR HARNESS
CONNECTS MOST MULTIPORT INJECTORS
2-15610
REPAIR KIT FOR MAIN ASNU
INJECTOR HARNESS
NOT AVAILABLE
Accessories, Components and Adaptors
Section 6 Page Section 6 Page Section 6 Page Section 6 Page 2222
-
Copyright 2009 ASNU Corporation All Rights Reserved
IMPORTANT
Many injectors look alike. The illustrations shown in this catalogue are the best possible representations & should be used
only as a guide. Prior to selecting injector components & before disassembling, always inspect the injector to be serviced.
Match & select the components with the injector. Ensuring they are suitable for use.
2-15518
ADAPTER BLOCK
GM TBI MAXI WITH CUSTOM HARNESS
(single block - use 2-15598 for double
block)
2-15519
ADAPTER BLOCK
GM TBI MULTEC WITH CUSTOM HARNESS
(single block - use 2-15632 for Quad
Block)
2-15526
ADAPTER BLOCK
FORD CFI - HOLLEY SPI CHRYSLER &
BOSCH WITH CUSTOM HARNESS
(single block - use 2-15528 for double
block)
2-15522
ADAPTER KIT
MITSUBISHI MPI WITH CUSTOM HAR-
NESS
(Tests 2 injectors)
2-15529
ADAPTER BLOCK
NISSAN / SUBARU SPI
(Tests 4 injectors)
2-15524
ADAPTER BLOCK
BOSCH SPI
(Tests 1 injector)
2-15525
ADAPTER BLOCK
SUZUKI SPI
(Tests 1 injector)
2-15530
ADAPTER BLOCK
FORD ZETA MPI / SPI
(BOSCH / WEBER / SIEMENS / DENSO)
(Tests 4 injectors)
ADAPTER BLOCK
NISSAN / SUBARU SPI
(Tests 1 injector)
Injector Index
Section 6 Page Section 6 Page Section 6 Page Section 6 Page 3333
-
Copyright 2009 ASNU Corporation All Rights Reserved
IMPORTANT
Many injectors look alike. The illustrations shown in this catalogue are the best possible representations & should be used
only as a guide. Prior to selecting injector components & before disassembling, always inspect the injector to be serviced.
Match & select the components with the injector. Ensuring they are suitable for use.
Accessories, Components and Adaptors
FILTER BASKET
REMOVAL TOOL
T-HANDLE TYPE
2-15638
CUSTOM NYLON COVER
FOR ASNU MACHINE
NLA
"FOAMEX"
WEATHERPROOF SIGN
COMPONENT ASSTS
2-15100 / FILTERS & CAPS
2-15200 /O'RINGS-SEALS
2-15300 /MONOPOINT KIT
2-15639
PINTLE CAP & FILTER BASKET
ASSEMBLY TOOL
2-15594
PINTLE CAP
REMOVAL TOOL
GUN TYPE
2-15595
FILTER REMOVAL TOOL
GUN TYPE
2-15510
RUBBER BENCH MAT
2-15521
PLASTIC
RAIL HOLDER
DISCONTINUED DISCONTINUED
Section 6 Page Section 6 Page Section 6 Page Section 6 Page 4444
FILTER BASKET
REMOVAL TOOL
T-HANDLE TYPE
2-15638
CUSTOM NYLON COVER
FOR ASNU MACHINE
NLA
"FOAMEX"
WEATHERPROOF SIGN
COMPONENT ASSTS
2-15100 / FILTERS & CAPS
2-15200 /O'RINGS-SEALS
2-15300 /MONOPOINT KIT
2-15639
PINTLE CAP & FILTER BASKET
ASSEMBLY TOOL
2-15594
PINTLE CAP
REMOVAL TOOL
GUN TYPE
2-15595
FILTER REMOVAL TOOL
GUN TYPE
2-15510
RUBBER BENCH MAT
2-15521
PLASTIC
RAIL HOLDER
-
Copyright 2009 ASNU Corporation All Rights Reserved
IMPORTANT
Many injectors look alike. The illustrations shown in this catalogue are the best possible representations & should be used
only as a guide. Prior to selecting injector components & before disassembling, always inspect the injector to be serviced.
Match & select the components with the injector. Ensuring they are suitable for use.
2-15640
WEBER / SIEMENS
TOP FEED MULTIPOINT
"MINI PECO INJECTOR"
ADAPTER PLATE
2-15605
INJECTOR SERVICE
REPORT PAD
50 SELF CARBON
(ENGLISH ONLY)
2-15531
TBI ADAPTER RING
USE W/ 2-15507 CRADLE
LARGE TBI INJECTORS
(GM MAXI)
2-15601
TBI ADAPTER RING
USE W/ 2-15507 CRADLE SMALL TBI IN-
JECTORS
GM MULTEC / DAEWOO
2-15520
CIS (K-JET) INJECTOR
CLEANING TRAY
2-15641
SIDE FEED INJECTOR CLEANING
TRAY
(SHALLOW)
ASNU 1992 onward
2-15600
ASNU UPTO 1992 (DEEP)
2-15642
CLEANING TRAY
PECO INJECTOR
2-15598
ADAPTER BLOCK
GM TBI MAXI
(Tests 2 injectors, includes custom harness)
2-15607
ADAPTER BLOCK
NISSAN / TOYOTA 2 WIRE
(Tests 2 injectors, includes blanking off
plug & custom harness
Accessories, Components and Adaptors
Section 6 Page Section 6 Page Section 6 Page Section 6 Page 5555
-
Copyright 2009 ASNU Corporation All Rights Reserved
IMPORTANT
Many injectors look alike. The illustrations shown in this catalogue are the best possible representations & should be used
only as a guide. Prior to selecting injector components & before disassembling, always inspect the injector to be serviced.
Match & select the components with the injector. Ensuring they are suitable for use.
Injector Index
2-15609
ADAPTER BLOCK
NISSAN JECS
(Tests 6 injectors)
2-15606
ADAPTER BLOCK
TOYOTA JECS MPI
PREVIA / TARAGO
(Tests 6 injectors)
ASNU 105
ADAPTER BLOCK
NISSAN PATHFINDER / NAVARA
(Tests 4 injectors)
2-15608
ADAPTER BLOCK
NISSAN / SUBARU SPI
(Tests 6 injectors)
2-15634
ADAPTER BLOCK
MAZDA / DENSO
(Tests 6 injectors)
2-15630
ADAPTER GM VORTEC 4.3 EARLY VERSION
(Tests complete assembly)
Section 6 Page Section 6 Page Section 6 Page Section 6 Page 6666
-
Copyright 2009 ASNU Corporation All Rights Reserved
IMPORTANT
Many injectors look alike. The illustrations shown in this catalogue are the best possible representations & should be used
only as a guide. Prior to selecting injector components & before disassembling, always inspect the injector to be serviced.
Match & select the components with the injector. Ensuring they are suitable for use.
Injector Index
2-15631
ADAPTER KIT GM VORTEC 4.3L & 5.7L LATE VERSION
(Tests complete assembly includes cleaning tray)
Section 6 Page Section 6 Page Section 6 Page Section 6 Page 7777
Echlin Part Numbers 2-15630 and 2-15631 Adapters comes complete with 2-15629 harness and plastic cleaning tray for ultrasonic cleaning of individual injector coils.
2-15629 Harness assembly is a available separately.
The later GM Vortec (late) system is a Multi Point operation with 6 or 8 individual injectors mounted in the housing, allowing either a simultaneous or sequential injection delivery.
The fuel is pressurized into the injector housing and as the injector is electronically opened, the fuel is pressure fed into a nylon delivery tube. At the end of the tube is a pressure poppet valve. The poppet valve sits in the inlet manifold and can be subject to extremely harsh conditions that may affect the per-formance of the valve. The opening and closing of the poppet valve is controlled by pressure and deter-
mines the fuel distribution, fuel atomization and the fuel delivery to each cylinder. The is therefore very important to examine the performance of this system, both before servicing (to un-derstand the cause of the engine problem) and after, to ensure the cause of the problem had been elimi-
nated and that the system is working properly.
SPRAYING SECURING FLOWING
-
Copyright 2009 ASNU Corporation All Rights Reserved
IMPORTANT
Many injectors look alike. The illustrations shown in this catalogue are the best possible representations & should be used
only as a guide. Prior to selecting injector components & before disassembling, always inspect the injector to be serviced.
Match & select the components with the injector. Ensuring they are suitable for use.
Injector Index
2-15631
ADAPTER KIT GM VORTEC 4.3L & 5.7L LATE VERSION
(Tests complete assembly includes cleaning tray)
2-15635
ADAPTER BLOCK
FORD ZETA / SIEMENS
CHRYSLER 3.5L
(Tests 6 injectors)
2-15636
ADAPTER BLOCK
HONDA CIVIC
NIKI KEIHIN
(Tests 2 injectors
Section 6 Page Section 6 Page Section 6 Page Section 6 Page 8888
-
Copyright 2009 ASNU Corporation All Rights Reserved
IMPORTANT
Many injectors look alike. The illustrations shown in this catalogue are the best possible representations & should be used
only as a guide. Prior to selecting injector components & before disassembling, always inspect the injector to be serviced.
Match & select the components with the injector. Ensuring they are suitable for use.
Accessories, Components and Adaptors
2-15637
Section 6 Page Section 6 Page Section 6 Page Section 6 Page 9999
-
Copyright 2009 ASNU Corporation All Rights Reserved
IMPORTANT
Many injectors look alike. The illustrations shown in this catalogue are the best possible representations & should be used
only as a guide. Prior to selecting injector components & before disassembling, always inspect the injector to be serviced.
Match & select the components with the injector. Ensuring they are suitable for use.
Accessories, Components and Adaptors
Section 6 Page Section 6 Page Section 6 Page Section 6 Page 10101010
-
Copyright 2009 ASNU Corporation All Rights Reserved
IMPORTANT
Many injectors look alike. The illustrations shown in this catalogue are the best possible representations & should be used
only as a guide. Prior to selecting injector components & before disassembling, always inspect the injector to be serviced.
Match & select the components with the injector. Ensuring they are suitable for use.
Numerical Parts Listing Echlin # DESCRIPTION
2-15001 Standard Injector Filter Basket with Brass Collar
2-15002 K-Jetronic (CIS) Injector O'Ring
2-15003 BMW Finned Pintle Insulator Cap - Yellow
2-15004 Standard L-Jetronic O'Ring - 15mm - Black
2-15006 L-Jetronic / Nissan / GM Injector Head Seal - Medium
2-15007 Nippon Denso Injector Rail Dust Seal (50)
2-15008 O'Ring Toyota Bottom Small Flat
2-15009 Toyota / Mazda / Nippon Denso Top O'Ring Seal
2-15010 D-Jetronic Injector O'Ring Head Seal - Small
2-15011 DUST SEAL OD 27MM ID22MM WIDTH 8MM
2-15012 Bosch L-Jetronic Injector Spacer - 2mm
2-15014 Nikki Injector Head Seal
2-15015 Nikki Injector Top O'Ring
2-15016 Honda Injector Grommet
2-15017 Bosch Trumpet End Pintle Cap
2-15018 Bosch/Nippon Denso Standard Pintle Insulator Cap
2-15019 L-Jetronic Standard Pintle Insulator Cap-Black
2-15020 D-Jetronic Pintle Insulator Cap-Black 18mm
2-15021 CAP, PKG TOYOTA PINTLE
2-15022 24 Compartment tray
2-15024 FERRULE, PKG
2-15026 O-RING, PKG INJECT LOW
2-15027 O-RING, PKG INJECT UPP
2-15029 NA FROM ACE
2-15029 O-RING, PKG INJECT UPP
2-15030 O-RING, PKG INJECT LOW
2-15031 SIDE FEED FILTER, PMAXI TBI INJ
2-15032
2-15032 O-RING, PKG INJECT UPP
Section 7 Page Section 7 Page Section 7 Page Section 7 Page 1111
-
Copyright 2009 ASNU Corporation All Rights Reserved
IMPORTANT
Many injectors look alike. The illustrations shown in this catalogue are the best possible representations & should be used
only as a guide. Prior to selecting injector components & before disassembling, always inspect the injector to be serviced.
Match & select the components with the injector. Ensuring they are suitable for use.
Numerical Parts Listing 2-15033 COLLAR, PKG INJECTOR
2-15035 Pintle Cap
2-15036 O-RING, PKG AUX INJECT
2-15039 Nissan/Toyota Side Feed Injector - Top- O-Ring
2-15040 SEAL, PKG INJECT UPPER
2-15041 SEAL, PKG INJECTOR
2-15042 CLIP, PKG INJECTOR
2-15043 O-RING, PKG INJECT LOW
2-15048 SEAL, PKG INJECTOR
2-15049 SEAL, PKG INJECTOR
2-15050 SEAL, PKG INJECTOR
2-15051 SEAL, PKG INJECTOR
2-15052 SEAL, PKG INJECTOR
2-15053 SEAL, PKG INJECTOR
2-15055 INSULATOR, PKG TOYOTA
2-15056 INSULATOR, PKG TOYOTA
2-15058 INSULATOR, PKG TOYOTA
2-15059 INSULATOR, PKG TOYOTA
2-15060 O-RING, PKG INJECTOR
2-15061 O-RING, PKG INJECTOR
2-15062 O-RING, PKG INJECTOR
2-15064 FILTER, HONDA INJECTOR
2-15065
2-15065 Screen Filter 25pk
2-15066 CLIP, SPI BOSCH
2-15067 CAP, MAZDA PINTLE
2-15068 CAP, FORD LRG PINTLE
2-15069 CAP, FORD SMALL PINTLE
2-15070 CAP, FORD 2HOLE PINTLE
Page Page Page Page 2222
-
Copyright 2009 ASNU Corporation All Rights Reserved
IMPORTANT
Many injectors look alike. The illustrations shown in this catalogue are the best possible representations & should be used
only as a guide. Prior to selecting injector components & before disassembling, always inspect the injector to be serviced.
Match & select the components with the injector. Ensuring they are suitable for use.
Numerical Parts Listing 2-15071 O-RING, TOYOTA
2-15072 CAP, WEBER PINTLE
2-15074 Fuel Injector Pintle Cap
2-15075 SPACER, NISSAN INJECTOR
2-15076
2-15076 Fuel Injector Filter Screen
2-15077 Fuel Injector Filter Screen
2-15091 FUEL INJECTOR HOSE
2-15092 SPACER, ROCH INJECTOR
2-15093 FILTER, TBI INJECT LOW
2-15094 Inj. O-Ring 25pk
2-15095 CAP, PINTLE L-JET
2-15096 VAPOR CAP 2-HOLE
2-15097 CAP, DENSO 2HOLE VAPOR
2-15098 CAP, 2HOLE INSULATOR
2-15099 CAP, FORD INSULATOR
2-15100 Multipoint Fuel Injection Kit 2 - O'Rings, Rubber Seals & Dust Caps.
2-15101 BMW CIS (K-Jetronic) Injector O'Ring
2-15102 Mazda Injector O'Ring - Lower Mazda Injector Head Seal
2-15103 Rail Washer 100pk
2-15104 Mazda Injector O'Ring - Lower Mazda Injector Head Seal
2-15106 Mazda Grommet
2-15107 Mazda Air Bleed Socket O'Ring
2-15108 Cadillac Fuel Rail Grommet
2-15109 Audi CIS (K-Jetronic) Injector Seal
2-15110 Injector Protective Cap - Small
2-15111 Injector Protective Cap Rail Fitted Injector Protective Dust Cap
2-15112 Injector Protective Cap
2-15113 Injector Protective Cap Hose Fitted Injector Protective Dust Cap
2-15114 Injector Protective Cap - Large
Page Page Page Page 3333
-
Copyright 2009 ASNU Corporation All Rights Reserved
IMPORTANT
Many injectors look alike. The illustrations shown in this catalogue are the best possible representations & should be used
only as a guide. Prior to selecting injector components & before disassembling, always inspect the injector to be serviced.
Match & select the components with the injector. Ensuring they are suitable for use.
Numerical Parts Listing
2-15300 Singlepoint/Monopoint Fuel Injection Kit 3 - Fiter Baskets, O'Rings & Seals.
2-15301 Rochester bottom filter basket
2-15302 Ford Injector O'Ring - Upper
2-15304 Ford Injector Mounting - Lower O'Ring
2-15305 Hitachi InjectorO'Ring - Small
2-15306 Hitachi Injector Filter Screen
2-15306 Bosch/Chrysler / Hitachi Tbi Filter Screen
2-15307 Rochester TBI Model 700 Injector O'Ring - Upper
2-15308 Inj. Washer 25pk
2-15309 Holley Tbi Injector O'ring - Lower
2-15310 Nissan Injector O'Ring
2-15311 Rochester TBI Larger Filter Screen (50)
2-15312 Ford Injector Filter Screen
2-15313 Bosch Injector O'Ring BLACK (50)
2-15314 Holley Tbi Upper O'ring
2-15315 Rochester Injector Housing Dust Seal
2-15316
2-15316 Niisan Single Point Injector
2-15317 Injector Body Support Rubber - Thick(SQUARE CORNERS)
2-15318 Bosch Injector O'Ring
2-15319 Rochester TBI Large - Lower O'Ring
2-15320 Rochester/Bendix/Weber small TBI O'Ring - Upper
2-15321 Bosch/Chrysler / Hitachi Tbi O'ring - Lower
2-15322 Bosch/Chrysler / Hitachi Tbi O'ring - Upper
2-15323 Chrysler / Hitachi Injector O'Ring
2-15500 ASNU Ultrasonic Injector Cleaner & Flow Bench
2-15502 Universal Injector Harness - Connects most multiport Injectors
2-15503 Plastic Moulded Flow Display Window
2-15504 Calibration Fluid Tank Cover
2-15506 Power Cord USA - 3metre
Page Page Page Page 4444
-
Copyright 2009 ASNU Corporation All Rights Reserved
IMPORTANT
Many injectors look alike. The illustrations shown in this catalogue are the best possible representations & should be used
only as a guide. Prior to selecting injector components & before disassembling, always inspect the injector to be serviced.
Match & select the components with the injector. Ensuring they are suitable for use.
Numerical Parts Listing 2-15507 Ultrasonic Bath Injector Cradle
2-15508 Steel Braided Fuel Hose Complete with Quick Coupler
2-15509 Glass Measuring Cylinder - MM
2-15510 Rubber Bench Mat
2-15511 Adaptor Coupling Top Feed Multiport Injectors w/filter basker removed
2-15512 Small O-Ring for 2-15511 Coupling
2-15513 Large(TOP) O-Ring for 2-15511 Adaptor Coupling
2-15514 8mm Male Adaptor for 10MM Female CIS (K-Jet)
2-15515 12mm Female Adaptor Coupling for 12MM Male CIS (K-Jet)
2-15518 Adaptor Black GM TBI Maxi with Custom Harness (single block / use 2-15598 for double block)
2-15519 GM TBI Multec w/Custom Harness (single block / use 2-15632 for Quad block)
2-15520 CIS K-Jet Cleaning Tray
2-15521 Plastic Fuel Rail Holder
2-15522 Adaptor Kit Mitsubishi MPI w/Custom Harness(Tests two injectors) ECI Two
2-15523 Adaptor Block Nissan / Subaru SPI (tests 1 injector)
2-15524 Adaptor Block Bosch SPI (tests 1 injector)
2-15525 Adaptor Block Suzuki SPI (tests 1 injector)
2-15526 Adaptor Block Ford CFI - Holly SPI Chrysler & Bosch w/Custom Harness (single block / use 2-15528 for double block)
2-15527 Adaptor Block Bosch / Holly / Nissan / Ford (tests 2 injectors)
2-15528 Adaptor Block Bosch / Holly / Nissan / Ford (tests 2 injectors)
2-15529 Adaptor Block Subaru / Nissan SPI (tests 4 Injectors)
2-15530 adaptor Block Ford Zeta MPI /SPI (Bosch / Weber / Siemens / Denso) (tests 4 injectors)
2-15531 TBI Adaptor Ring - use w/2-15507 Cradle large TBI Injectors (GM Maxi)
2-15532 8mm Female Adaptor For 8mm Male Cold Start Injector
2-15533 10mm Male Adaptor for 10mm Female Cold Start Injector
2-15534 Adaptor Coupling Cold Start Injector Hose Type 12-13MM
2-15535 10mm Female Adaptor Coupling for 10MM Male Cold Start Injector
2-15536 Adaptor Coupling Bosch, Lucas, Weber, Marelli, Siemens - Tests Injector w/o
2-15537 Adaptor Coupling Tests Multiport Injectors with Hose Attached
2-15538 Adzaptor Coupling Slim Tyope Denso - Tests Injectors w/o removing inlet filter
Page Page Page Page 5555
-
Copyright 2009 ASNU Corporation All Rights Reserved
IMPORTANT
Many injectors look alike. The illustrations shown in this catalogue are the best possible representations & should be used
only as a guide. Prior to selecting injector components & before disassembling, always inspect the injector to be serviced.
Match & select the components with the injector. Ensuring they are suitable for use.
Numerical Parts Listing 2-15539 Calibration Fluid In-Line Fuel Filter
2-15540 Calibration Fluid In-Tank Pre-pump Filter
2-15562 Ultrasonic Tank Complete Assembly
2-15593 Flow Rite calibration fluid
2-15594 Pintle Cap Removal Tool - Hand Gun Type
2-15595 Filter Basket Removal Tool - Hand Gun Type
2-15597 Adaptor Block Ford CFI - Holly SPI Chrysler & Bosch w/Custom Harness (single block / use 2-15528 for double block)
2-15598 GM-TBI Large (TBI) Dual Injector Manifold and Harness Kit
2-15599 ASNU Main Board-Service Exchange ($750 Core)
2-15600 Side Feed Injector Cleaning Tray (Deep)
2-15601 TBI Adaptor Ring - use w/2-15507 Cradle Small TBI Injectors (GM Multec / Dae-woo)
2-15602
2-15603 Quick Reference Wall Chart - English
2-15604 Instruction Manual
2-15605 Injector Service Report Pad (50 Pages per Pad)
2-15606 Toyota Tarago/Previa Quad Injector Manifold Kit
2-15607 Nissan / Toyota 2 Wire Dual Injector Manifold and Harness Kit
2-15608 Subaru / Nissan Maxima 6 Injector Manifold Kit
2-15609 Nissan Navara Multipoint Six Injector Manifold Kit
2-15610 Repair Lits for Main Injector Harness
2-15612 Injector Blank - Nissan / Toyota 2 Wire
2-15613 Injector Blank - Nissan Navara Multipoint
2-15627 Bio-Clean Ultrasonic Cleaneing Fluid
2-15629 Universal Injector Harness for Vortec System
2-15629 Wiring Harness for Vortec
2-15630 Adaptor Block GM Vortec 4.3 - Early Version
2-15631 Adaptor Kit GM Vortec - 4.3 & 5.7 Later Version
2-15632 Adaptor Block GM TBI Multec 700 ( tests 4 injectors) includes harness
2-15634 Adaptor Block Mazda / Denso (tests 6 injectors) 2-15635 Adaptor Block Ford Zeta / Siemens Chrysler 3.5 (tests 6 injectors)
Page Page Page Page 6666
-
Copyright 2009 ASNU Corporation All Rights Reserved
IMPORTANT
Many injectors look alike. The illustrations shown in this catalogue are the best possible representations & should be used
only as a guide. Prior to selecting injector components & before disassembling, always inspect the injector to be serviced.
Match & select the components with the injector. Ensuring they are suitable for use.
Numerical Parts Listing 2-15636 Adaptor Block Honda Civic / Nikki Keihen (tests 2 injectors)
2-15637 Custom Harness Delphi Pin Type Connectors (tests up to 8 injectors)
2-15638 Injector Nylon Cover for 2-15500 ASNU Machine
2-15639 Injector Filter Basket & Pintle Cap Assembly Tool
2-15640 Adaptor Plate for Weber / Siemens (Mini Peco Injector)
2-15641 Side Feed Injector Cleaning Tray (Shallow) 1992 onward / 2-15600 up to 1992 (Deep)
2-15642 Perspex cleaning tray for K-jet & Weber/Sieman Mini Peco injectors
2-15643 Magnetically Couples Electric High Performance Pump
2-15644 High Performance Fuel Rail Top Feed Injectors (tests 8 injectors) includes extension bolts for long GDI injectors
2-15645 Lid for ultra-sonic tank
2-15646 GDI injector Drive box
2-15647 Mercury Optimax
2-15648 Filter removal tool replacement bit
2-15649 Late Bosch Pintle
2-15650 Late Bosch Pintle
2-15651 Late Bosch Pintle
2-15652 Late GM Pencil Pintle
2-15653 Top O-Ring Retainer
2-15654 GM Vortex 4.3L V5 CPI Filter
2-15655 Pintle Cap Holden
2-15656 Pintle Cap Ford AU
2-15660
2-15660 NA FROM ACE
2-15661 NA FROM ACE
2-15662 1MM Spacer
2-15663 Pintle Cap; Ribbed for BNW w/4MM hole for 24V engine
2-15669 SPI/TBI Plastic Clip Cover
2-15671 Pintle Cap
2-15671 Pintle Cap- Bosch Cone Type Single Point Injector
2-15672
Page Page Page Page 7777
-
Copyright 2009 ASNU Corporation All Rights Reserved
IMPORTANT
Many injectors look alike. The illustrations shown in this catalogue are the best possible representations & should be used
only as a guide. Prior to selecting injector components & before disassembling, always inspect the injector to be serviced.
Match & select the components with the injector. Ensuring they are suitable for use.
Numerical Parts Listing
2-15672 NA FROM ACE
2-15673 Upper O-Ring - Nissan SPI / MPI
2-15674 O-RING, PKG INJECTOR
2-15679 14.5 MM O-RING Brown
2-15682 Hitachi InjectorO'Ring Seal - Upper Large
2-15685 O-RING, PKG INJECTOR
2-15687 NA FROM ACE
2-15689 O-RING, PKG
2-15690 Top O-Ring for Mazda Side Feed Injectors
2-15692 NA FROM ACE
2-15693 NA FROM ACE
2-15698 Pintle Cap - Large Hole Type for "V" Spray Injectors
TBA Brass / Plastic Filter Basket for Lucas Injectors
TBA Brass / Wire Filter Basket for Weber Injectors
Page Page Page Page 8888