Inter Office Memo

From:-M. Sanjeeva MurthyOur Ref:-ASME QualificationDate :- 23/11/2011To,Planning Department

Through AGM Q.C.

Subject: - Material Requirement for ASME Qualification of PQR,WPS Test Pieces WeldingDrg. Ref.:HBL-A1-101377 REV. 0 (SIDE WALL TOP HEADER)

With ref. to the above drawing following material are required for preparation of PQR, WPS as per the details given below:

Sr. No.Material SpecificationTest Piece SizeWelding Process

1SA 106 GR.BOD 323.8mm 33.32mm thk 1000mm longGTAW+SMAW

2IS 2062 GR.A or B350mm long 150mm wide 25mm thkSMAW

3SA 516 GR.70350 mm long 150mm wide 40mm thkSMAW

M.Sanjeeva Murthy Welding Engineer