ASIA Pneumatic Engineering & Services Sdn Bhd is an authorized distributor /

reseller of:

APESB was established in 2020 with more than a decade of experience in the

Compressed Air System and Material Handling industry. We specialize in

compressor optimization services and provide a comprehensive range of air-powered

hoist and manipulators. We are supported by our extensive network within the

industry, ensuring our end users are provided with the best pneumatic solutions

catering to their needs.

We were formed with one goal in mind; that is to provide the highest standards of

pneumatic equipment and ownership experience; ensuring your Confidence and

Peace of Mind.

Compressed Air System

• KOBELCO Screw Compressors

• DENYO Compressor & Generator

• SMC Dryer & Filter

• ORION Chiller

• FMX Pressure Flow Controller

Material Handling

• TOKU Air Hoist

• CKD Power Arm

• BPM Pneumatic Manipulator

• SUMITOMO Lifting Magnet

Explosion-Proof

• RAYTEC Lightings

Kobelco screw compressors have capacity and pressure capabilities

between those of centrifugal and reciprocating compressors. They

handle inlet volume flows up to 84,000 cfm and discharge pressures up

to 100 barg. They achieve positive displacement compression using

two synchronized, helical rotors. They are smooth-running and are

relatively compact. The Kobelion series (Oil-Flooded) are available

from 22 - 250kW while the Emeraude series (Oil-Free) are 15 -160kW.

As a supplier of Compressed Air System, Asia Pneumatic Engineering

& Services offers solution and services for all aspects of energy

optimization and cost saving measures; from designing, delivering,

installation, to testing and commissioning of the system. Upon the

required Pressure Dew Point specification, we can provide Desiccant,

Refrigerant, or Membrane dryers and filters from leading Japanese

brands to complete your brand-new Compressed Air System.

In a typical industrial setting, the compressed air network consumes

up to 16 – 20% of total energy consumption; and on Lifetime

Ownership, 76% are spent on electricity. Therefore energy-savings

optimization are essential to keep costs down. With the FMX Flow

Controller, we are able to deliver energy savings up to 20%

electricity cost of your current Compressed Air System.

The FMX Flow Controller is designed to operate at the intermediate

point of the compressed air system and provide stable air supply at

optimum pressure. It monitors and releases required storage air to

satisfy peak demands instead of starting standby compressors.

Thus energy is saved through reduction in mass of air and load

period of compressors.

As a leading Pneumatic Material Handling company, Asia Pneumatic Engineering & Services offers a

comprehensive range of solution and services for all pneumatic hoist and manipulator requirements. Capacity

ranges from 30kg to 50 ton, we are ready to support you on the application of such durable machines. For

pneumatic hoist; it is available with air trolley, slewing jib, gantry crane, fixed point, or monorail. While the

manipulator can be mounted on column or ceiling, or even placed onto a track for maximum coverage.

TOKU is a Japanese manufacturer with over 80 years of experience in producing pneumatic tools and

remains the leading efforts in supplying high productivity and durability performance tool for the construction

and industrial market worldwide.

Key feature includes: -

• High Power, High Productivity - Long piston stroke provides superior impact energy.

• High Durability, Easy Maintenance - Reinforced cup retainer and replaceable busing to protect cylinder

wear.

Denyo is a leading producer of engine-driven generators and maintains

a commanding presence in the market. These mobile units are

extremely useful in providing electricity in areas where conventional

power supply infrastructure is unavailable. More than 500 models of

engine-driven generators are available, ranging from 0.9kVA - 1100kVA

units. DENYO generators are also available in trailer mobile versions,

primary and emergency use types. Built on cutting-edge technology and

innovation, DENYO generators are durable, energy efficient and sound-

proof.

To provide optimization service for your compressed air network, it is essential to learn of its current health. This can be done by conducting an

Air Audit which comprises of the following stages;

Stage 1: Site survey and installation of data loggers to identify 3 crucial parameters; Power, Flow, and Pressure.

Stage 2: Report will be generated upon completion of data thus identifying the Actual Efficiency and Area of Loss.

Stage 3: Projection will be made based on the implementation of our PFC and a Recommendation table will be available as well.

Stage 4: Selection of our Pressure Flow Controller and Implementation.

Having applied design and technology in a wide variety of production areas since

1988, BPM has concentrated over 32 years of experience and credibility on

pneumatic manipulators, which are indispensable components of modern

production.

Various tooling options e.g. Vacuum, gripper, magnet, etc. can be incorporated

with the BPM Pneumatic Manipulator to be application-specific. These highly-

sophisticated machinery are customizable and available through mounting on

column, from the ceiling, and even placed on specially-designed trolley to be used

on tracks; with load capacity up to 1 ton.

The Sumitomo Heavy Industries (SHI) Group contributes to improving transport efficiency for steel products for 100

years while its Lifting Magnets division are essential for the transport of steel products and iron scrap at steel mills,

shipbuilding yards, and metal recycling plants. The lifting magnets are capable of hoisting and transporting multiple

steel sheets in one operation, significantly improving work efficiency.

The Magporter is a battery-powered portable lifting magnet, available in 2.5 and 5 ton steel hoisting. It has various

features such as its power consumption, speedy operation, electronics for safe usage, and perhaps most

important; its portability. It was designed exclusively for the transportation of steel plates at places e.g. shearing,

cutting, and steel fabrication shop; while offering handling capability with reasonable price. These can be used to

lift steel sheets and various form of finished steel products e.g. round bar, pipe, and shaped steel.

The PAW Series is a global model that has a high safety design and conforms to European

safety standard CE. The Power Arm as a Human Assist product that contributes to alleviating

workloads and securing workers safety. With multi-axis specifications, it is compact and can be

folded and stored accordingly. The Manipulator are available to the combination of 3 axes

according to application, rendering it possible to transport your products to higher and further

locations.

The Power Arm can be mounted through column, ceiling, rail, and even on trolley. These highly-

customizable equipment are ideal for light applications, and are highly maneuverable. Load

capacity are available in 3 variants; 30, 50, and 80kg.