ASHB & ASFBQuality with Real Economy

British and Australian Standards 415/440 volt 3 phase 50Hz

Frames 160 To 315 Open Dripproof Enclosure

�

TECO open drip proof squirrel-cage induction motors are designed, manufactured and tested to meet or exceed latest BS/AS and other international standards, suitable for all general applications, where the use of open machines acceptable. TECO’s unique design and versatile engineering background makes TECO motor longer running and less costly.

　

Open Protected Drip-Proof Type. Squirrel-cage Rotor.

1. Frame: High grade cast-iron frame and end brackets-Distortion free and rigid alignment.

2. BEARING: Grease Pre-Packed or vacuum de-gassed steel bearings- Allow extra overhung load capacities and longer bearing life.

3. BEARING CAP ( BEARING COVER-OUTER ): Unique designed flinger and bearing cap-to protect bearing against dust and moisture.

4. ROTOR: Dynamically balanced, pressure cast aluminum rotor assembly with integrally cast fans.

5. STATOR: Polyster Film/DMD non-hydroscopic insulation system, meeting or exceeding NEMA and IEEE standards. Maximum protection against heat, corrosion, abrasion and moisture.

1

2

3

5

4

�

●SPECIFICATION TABLE,

Type: ASHB、ASFB

ITEM STANDARD SPECIFICATION

RATING

KIND OF MOTOR SQUIRREL-CAGE INDUCTION MOTOR (SCIM)

DESIGN STANDARD IEC 600�4, BS 4999 BS 5000, AS 1�59, AS 1�60 　

VOLTAGE �80V, 400V ,415V, 440V

FREQUENCY 50Hz 　

OUTPUT RANGE

ASHB - F#160M~�50MC：7.5kW~110kW F#�80SA~�15MC：75~�50KWASFB - F#160M~�50MC：7.5kW~110kW F#�80SA ～ �15MC：55~�50kW

R.P.M. (SYN.) ASHB：�000 ～ 1000R.P.M. (� ～ 6 POLE) ASFB：�000 ～ 750R.P.M. (� ～ 8 POLE)

TIME DUTY CONTINUOUS, S1 ( S.F. 1.0) 　

FRAME SIZE (SS) 160M ～ �15MC 　

PROTECTION ENCLOSURE DRIP PROOF (IP ��) 　

COOLING METHOD SELF VENTILATED, INTERIOR COOLING (IC 01)

MOUNTING F#160M~�50MC：HORIZONTAL FOOT MOUNTING B� ( IM 1001), B�5 ( IM�001 ) INTERCHANGEABLEF#�80SA~�15MC：HORIZONTAL FOOT MOUNTING F-1 (IM 1001), F-1, F-�

APPLICATION

POWER CONDITIONS

VOLTAGE：F#160M~�50MC：±10%, F#�80SA~�15MC：±5% FREQUENCY：±5%, AND ±10% of COMBINED VOLTAGE AND FREQUENCY,

BUT FREQUENCY VARIATION DOES NOT EXCEED ±5%.

ENVIRONMENT CONDITIONS

PLACE: INDOOR, NON-HAZARDOUS

AMBIENT TEMPERATURE：-�0 ~ 40℃

RELATIVE HUMIDITY：LESS THAN 80% RH (NON-CONDENSATION)

ALTITUDE：LESS THAN 1000 METERS

DIRECTION OF ROTATION

CLOCKWISE WHEN FACING THE DRIVE END SIDE AND THE ALPHABETICAL

SEQUENCE OF THE TERMINAL LETTERS OF A PHASE GROUP

CORRESPONDS WITH THE TIME SEQUENCE OF THE TERMINAL VOLTAGES

METHOD OF STARTING FULL VOLTAGE DIRECT-ON-LINE OR Y - △ STARTING 　

CONSTRUCTION

FRAME HIGH GRADE CAST IRON 　

END BRACKET HIGH GRADE CAST IRON 　

INTERNAL FAN INTEGRALLY CAST ALUMINUM BLADES

SHAFT CARBON STEEL, CYLINDRICAL SINGLE EXTENSION WITH KEYWAY AND KEY 　

BEARING

F#160M~�50MC：BRACKET MOUNTING, VACUUM DE-GASSED HIGH QUALITY OPEN BEARINGS

F#�80SA~�15MC：BRACKET MOUNTING, VACUUM DE-GASSED HIGH QUALITY ROLLING BEARINGS WITH REGREASE PROVISIONS　

LUBRICANT MINERAL OIL, LI-BASE GREASE - F#160M~�50MC：MULTEMP SRL F#�80SA~�15MC：SHELL ALVANIA R�

SHAFT FLINGER METAL FLINGERS ON BOTH ENDS 　

4

●SPECIFICATION TABLE,

Type: ASHB、ASFB

ITEM STANDARD SPECIFICATION

CONSTRUCTION

TERMINAL HOUSING

STEEL PLATE, LARGER SIZE, CAN BE ROTATED EACH 90° STEP, AT 　

RIGHT HAND SIDE FACING THE DRIVE END IS STANDARD, WHICH CAN

CHANGE TO LEFT HAND SIDE 　

LEAD TERMINAL 6 LEADS, WITH SOLDERLESS LUG TERMINALS 　

IRON CORE

HIGH GRADE, INSULATED, COLD-ROLLED ELECTRO-MAGNETIC STEEL 　

PLATE 　

STATOR WINDING

RANDOM WOUND WITH HEAVY BUILT, HEAT RESISTANT POLYESTER, 　

ENAMELED COPPER WIRE 　

STATOR INSULATION CLASS F INSULATION SYSTEM 　

VARNISH TREATMENT SPECIAL HEAT RESISTANT PHENOL ALKYD VARNISH 　

ROTOR WINDING

SQUIRREL-CAGE, COPPER ALLOY BAR BRAZED OR ALUMINUM

CONDUCTOR WITH END-RING AND WAFTER BLADES INTEGRALLY CAST

PAINTING

ASHB：PHENOLIC RUST PROOF BASE PLUS LACQUER SURFACE FINISHED PAINTING IN LIGHT-GRAY COLOR (MUNSELL N5)

ASFB：PHENOLIC RUST PROOF BASE PLUS LACQUER SURFACE FINISHED PAINTING IN BLUE-GRAY COLOR (MUNSELL 7.5BG 4/� )

NAMEPLATE STAINLESS STEEL PLATE 　

HARDWARE ISO METRIC SYSTEM 　

GROUNDING TERMINAL BE SET INSIDE THE TERMINAL BOX 　

PERFORMANCE

TEST PROCEDURE BS 4999, AS 1�59 AND FULL VOLTAGE MEASURING STARTING PERFORMANCE. 　

TEMPERATURE RISE

NOT TO EXCEED 80℃ RISE BY RESISTANCE METHOD 　

80℃ RISE AT S.F. 1.0 　

OVER TORQUE 160% RATED TORQUE FOR 15 SEC

5

●DIMENSIONS

Drip-Proof Type. Squirrel-Cage Rotor.

Type: ASHB、ASFB

Dimension in mm

Output (kW) FRAME　 FIG.A AA AB AC AD AE B BB C H HA HD HE

2P 4P 6P SIZE NO.

11 15 11 7.5 160M1

�54 50 �00 ��� �6� �19 �10 �50 108 160 18 �75 108

18.5 �� 15 18.5 11 160L �54 50 �00 ��� �6� �19 �54 �00 108 160 18 �75 108

FRAMEK KK L LE

SHAFT EXTENSION BEARING　

D E ED F G GA DH DRIVE ENDOPPOSITE

SIZE DRIVE END

160M 14.5 �5 5�8.0 100.0 48 110 80 14 4�.5 51.5 M16 × �� 6�10ZZ 6�09ZZ

160L 14.5 �5 57�.0 100.0 48 110 80 14 4�.5 51.5 M16 × �� 6�10ZZ 6�09ZZ

Note: 1. Tolerance of shaft end diameter D：Under ψ48：k6 , Above ψ55：m6. 2. Tolerance of shaft center height H：+0 , -0.5.

KK

HOLES

K

HOLES

DH

TAP

AC

AD

AA AE

A

AB

HA

HE

H

HD

ED

L

E C B LE

BBF

G GA

D

6

●DIMENSIONS

Drip-Proof Type. Squirrel-Cage Rotor.

Type: ASHB、ASFB

Dimension in mm

Output (kW) FRAME FIG.A AA AB AC AD AE B BB C H HA HD HE

2P 4P 6P SIZE NO.

�0 － － 180MA

�

�79 75 �55 �69 �05 �50 �41 �9� 1�1 180 �0 4�5 119

－ �� 15 180MC �79 75 �55 �69 �05 �50 �41 �9� 1�1 180 �0 4�5 119

�7 － － 180LA �79 75 �55 �69 �05 �50 �79 ��1 1�1 180 �0 4�5 119

－ �0 18.5 180LC �79 75 �55 �69 �05 �50 �79 ��1 1�1 180 �0 4�5 119

45 － － �00MA �18 80 400 409 �4� �79 �67 ��5 1�� �00 �5 464 1�9

－ �7 �� �00MC �18 80 400 409 �4� �79 �67 ��5 1�� �00 �5 464 1�9

55 － － �00LA �18 80 400 409 �4� �79 �05 �65 1�� �00 �5 464 1�9

－ 45 �0 �00LC �18 80 400 409 �4� �79 �05 �65 1�� �00 �5 464 1�9

75 － － ��5MA �56 90 4�0 444 �81 �1� �11 �80 149 ��5 �0 5�� 15�

－ 55 �7 ��5MC �56 90 4�0 444 �81 �1� �11 �80 149 ��5 �0 5�� 15�

90 － － �50SA 406 95 500 500 479 �64 �11 �98 168 �50 �� 59� 1�9

－ 75 45 �50SC 406 95 500 500 479 �64 �11 �98 168 �50 �� 59� 1�9

110 － － �50MA 406 95 500 500 479 �64 �49 4�6 168 �50 �� 59� 1�9

－ 90 55 �50MC 406 95 500 500 479 �64 �49 4�6 168 �50 �� 59� 1�9

FRAMEK KK L LE

SHAFT EXTENSION BEARING

D E ED F G GA DH DRIVE ENDOPPOSITE

SIZE DRIVE END

180MA 14.5 5� 60�.0 1�0.0 55 110 80 16 49.0 59.0 M�0 × 40 6�1�C� 6�11C�

180MC 14.5 5� 60�.0 1�0.0 55 110 80 16 49.0 59.0 M�0 × 40 NU�1� 6�11

180LA 14.5 5� 640.0 1�0.0 55 110 80 16 49.0 59.0 M�0 × 40 6�1�C� 6�11C�

180LC 14.5 5� 640.0 1�0.0 55 110 80 16 49.0 59.0 M�0 × 40 NU�1� 6�11

�00MA 18.5 65 68�.0 14�.0 60 140 110 18 5�.0 64.0 M�0 × 40 6�1�C� 6�1�C�

�00MC 18.5 65 68�.0 14�.0 60 140 110 18 5�.0 64.0 M�0 × 40 NU�1� 6�1�

�00LA 18.5 65 7�0.0 14�.0 60 140 110 18 5�.0 64.0 M�0 × 40 6�1�C� 6�1�C�

�00LC 18.5 65 7�0.0 14�.0 60 140 110 18 5�.0 64.0 M�0 × 40 NU�1� 6�1�

��5MA 18.5 9� 751.0 151.0 60 140 110 18 5�.0 64.0 M�0 × 40 6�1�C� 6�1�C�

��5MC 18.5 9� 751.0 151.0 65 140 110 18 58.0 69.0 M�0 × 40 6�14 6�1�

�50SA �4.0 9� 781.5 16�.5 65 140 110 18 58.0 69.0 M�0 × 40 6�14C� 6�14C�

�50SC �4.0 9� 781.5 16�.5 75 140 110 �0 67.5 79.5 M�0 × 40 NU�17 6�14

�50MA �4.0 9� 819.5 16�.5 65 140 110 18 58.0 69.0 M�0 × 40 6�14C� 6�14C�

�50MC �4.0 9� 819.5 16�.5 75 140 110 �0 67.5 79.5 M�0 × 40 NU�17 6�14

Note:1. Tolerance of shaft end diameter D：Under ψ48：k6 , Above ψ55：m6. 2. Tolerance of shaft center height H：+0 , -0.5.

KK

HOLES

K

HOLES

AC

AD

AA AE

A

AB

HA

HE

H

HD

ED

L

B LECE

BBF

G GA

D

7

●DIMENSIONS

Drip-Proof Type. Squirrel-Cage Rotor.

Type: ASHB、ASFB

Dimension in mm

Output (kW) FRAME FIG.A AA AB AC AD AE B BA BB C D E ED

2P 4P 6P SIZE NO.

*1��, 150 - - �80SA

�

457 100 560 560 540 4�5 �68 95 450 190 65 140 110

- 110 75 �80SC 457 100 560 560 540 4�5 �68 95 450 190 85 170 140

*185 - - �80MA 457 100 560 560 540 4�5 419 95 500 190 65 140 110

- 1��, 150 90 �80MC 457 100 560 560 540 4�5 419 95 500 190 85 170 140

*��0 - - �15SA 508 110 610 610 565 450 406 110 490 �16 70 140 110

- *185 - �15SB 508 110 610 610 565 450 406 110 490 �16 90 170 140

- - 110 �15SC 508 110 610 610 565 450 406 110 490 �16 90 170 140

*�50 - - �15MA 508 110 610 610 565 450 457 110 540 �16 70 140 110

- *��0 - �15MB 508 110 610 610 565 450 457 110 540 �16 90 170 140

- -1��, 150

�15MC 508 110 610 610 565 450 457 110 540 �16 90 170 140

FRAMEEE F G GA H HA HD HE K L LE

BEARING

DRIVE ENDOPPOSITE

SIZE DRIVE END

�80SA 1�4 18 58 69 �80 �6 65� 116 �4 891 19� 6�14C� 6�14C�

�80SC 157 �� 76 90 �80 �6 65� 116 �4 9�6 198 NU�18C� 6�16

�80MA 1�4 18 58 69 �80 �6 65� 116 �4 94� 19� 6�14C� 6�14C�

�80MC 157 �� 76 90 �80 �6 65� 116 �4 977 198 NU�18C� 6�16

�15SA 1�4 �0 6�.5 74.5 �15 40 7�� 151 �8 989 ��7 6�15C� 6�15C�

�15SB 157 �5 81 95 �15 40 7�� 151 �8 1019 ��7 NU��0C� 6�18

�15SC 157 �5 81 95 �15 40 7�� 151 �8 1019 ��7 NU��0C� 6�18

�15MA 1�4 �0 6�.5 74.5 �15 40 7�� 151 �8 1040 ��7 6�15C� 6�15C�

�15MB 157 �5 81 95 �15 40 7�� 151 �8 1070 ��7 NU��0C� 6�18

�15MC 157 �5 81 95 �15 40 7�� 151 �8 1070 ��7 NU��0C� 6�18

Note: 1. Tolerance of shaft end diameter D：m6.　 2. Tolerance of shaft center height H：+0 , -1.　 3. Usable shaft length :EE　 4. * For direct flexible coupling

K HOLE

BA

BB

E

ED

L

EE

BA

BC LE

GA

G

F

D

HA

HE

H

HD

AA

AB

A

AE

AA

AC

AD

DEC. '09/TA-2700

HEAD OFFICETeco Electric & Machinery Co., Ltd10F No,3-1, Yuan Cyu St.Nan-Kang Taipei 115Taiwan ROCTel: +886 2 6615 9111www.teco.com.tw

UNITED STATESTeco-Westinghouse Motor CompanyPO Box 227 (78680-0277)5100 N.IH35Round Rock Texas 78681 USATel: +1 512 255 4141 +1 800 873 8326www.tecowestinghouse.com

CANADATeco-WestinghouseMotors Inc. (Canada)18060-109th Ave Edmonton, Alberta T5S 2K2 CanadaTel: +1 780 444 8933Fax: (780) 486-457524 HR Emergency Pager:(780) 419 7734Toll Free: 800-661-4023Fax Toll Free: 888-USE-TWMIwww.twmi.com

UNITED KINGDOMTeco Electric Europe Ltd.7 Dakota Avenue, Salford. M50 2PUTel: +44 161 877 8025Fax: +44 161 877 8030www.teco.co.uk

MEXICOTeco Westinghouse Motor Company S.A. de C.V.Circuito Mexiamora Poniente No. 321Col. Puerto Interior, Parque Santa Fe CP 36275Silao, Guanajuato., MéxicoTel: +52 (472) 748 9016 al 20

NETHERLANDSTeco Electric & Machinery B.V.Teco's European Head OfficeRivium 3e Straat 272909 LH Capelle a/d IJsselThe NetherlandsTel: +31 10 266 6633Fax: +31 10 202 6415

GERMANYTeco Electric & Machinery B.V.Niederiassung Deutschland,Marktstrasse 1069 37441 Bad SachsaGermanyTel: +49 5523 95340Fax: +49 5523 953424www.teco-westinghouse.de

SPAINTeco Electric & Machinery B.V.Spain OfficeC/Apostol Santiago, 38, 1-128017 Madrid, SpainTel/Fax: 34-91-326-30-91E-mail: info@tecowestinghouse.es

TURKEYOPTIMER Elektrik Makina Ltd.Inonu cad. Sumko Sitesi M4-A blokNo: 2-kozyatagi-lstanbul 34742Tel: +90-216-464 54 13Pbx.Fax: +90-216-464 54 47

MIDDLE EASTTeco Middle East Electric & Machinery Co., Ltd.Kingdom of Saudi Arabia Dammam CityP.O. Box 708 - Dammam 31421Tel: +966 3 835 2619Fax: +966 3 834 1678www.teco-me.com

SAUDI ARABIAAl Quraishi Electrical Services of S.A.Al Quraishi Center, King Khalid Street,P.O.Box 7386, Dammam-31462Tel: +966 3 857-2537Fax: +966 3 857-2541www.aqesa.com

IRAN, AZERBAIJAN & ARMENIAATLAS DIBA Engineering & Trade Co.No.3, Fakouri St., South Kadj Ave.Golha Sq., Fatemi, Tehran, IranTel: +98 21 88 33 03 81-3Fax: +98 21 88 33 03 84www.atlasdibaco.com

EGYPTAmsol & Co.38 Mossadak Street Dokki, Giza, EgyptTel: +202 333 79 774Fax: +202 376 20 307

SOUTH AFRICAArmCoil Afrika (Pty) Ltd.Unit 3 Prestige Park 127 Main Reef RoadTechnikon RoodepoortPO Box 500 Maraisburg 1700Gauteng South AfricaTel: +2711 763 2351Fax: 0866 318 588www.armcoil.co.za

AUSTRALIATeco Australia Pty Ltd.335-337 Woodpark RoadSmithfield NSW 2164 AustraliaTel: +61 2 9765 8118www.teco.com.au

NEW ZEALANDTeco New Zealand Pty Ltd.Unit 3, 477 Great South RoadPenrose Auckland New ZealandTel: +64 9 526 8480

JAPANSankyo Co., Ltd.26th fl. World Trading Center Bldg.2-4-1 Hamamatsucho Minato-kuTokyo Japan 105-6126Tel: +81 3 3435 9729Fax: +81 3 3578 8381

SINGAPORETeco Electric & Machinery (PTE) Ltd.18 chin Bee Drive Singapore 619865Tel: +65 6 265 4622www.teco.com.sg

INDONESIAP.T. Teco Multiguna ElektroJL Bandengan Utara No. 83/1-2-3Jakarta Utara-14440 IndonesiaTel: +62 21 662 2201

CHINAShanghai OfficeRm 321 Building No.6Lane 1279 Zhongshan W. Rd.Shanghai. PRCTel: +86 21 5116 8255Fax: +86 21 6278 8761

Wuxi Teco Electric & Machinery Co., LtdNo. 9 South of Changjiang Road,New Zone, Wuxi,Jiangsu Province, PRCTel: +86 510 8534 2005Fax: +86 510 8534 2001www.wuxiteco.com

Jiangxi Teco Electric & Machinery Co., Ltd189 Dongyuan Rd. Hi-Tech Zone, NanchangJiangxi Province, PRCTel: +86 791 819 5999Fax: +86 791 816 7730

Suzhou Teco Electric & Machinery Co., LtdNo. 1 Changjiang W.Rd. LiuheTaicang City, Suzhou,Jiangsu Province, PRCTel: +86 512 5361 9901Fax: +86 512 5396 1058

Fujian Teco Precision Co., Ltd.Xiayang, Jiazhao, Zhanggang Village, SaiqiDevelopmentZone, Fuan, Fujian, ChinaTel: +86 593 633 0300Fax: +86 593 633 0303

HONG KONGTecoson Industrial Development(HK) Co., Ltd.Rm 3712 Hong Kong Plaza186-191 Connaught Rd. WestHong KongTel: +852 2858 3220

MALAYSIASTE Marketing SDN BHD6 Jalan Firma 2 Kawasan Periind. Tebrau 181100 Johor Bahru Johor MalaysiaTel: +60 7 354 8008

THAILANDTeco Electric & Machinery(Thai) Co., Ltd.128/1 Soi WatsrivareenoiMoo 7 Bangna-Trad Road Km 18Bangchalong BangpleeSamuthprakarn 10540 ThailandTel: +662 3371311- 20

VIETNAMTeco(Vietnam) Electric & Machinery Co., LtdKCN LONG Thanh, Huyen Long Thanh,Tinh Dong Nai. VietnamTel: +84 61 3514151Fax: +84 61 3514110

PHILIPPINESTrade OneNo. 56 Aragon Street San FranciscoDel Monte 1100 Quezon City Metro Manila,PhilippinesTel: (632) 371-3032Fax: (632) 371-1175www.tradeoneinc.com