as nzs 4159.1-1994 information technology - font information interchange architecture
TRANSCRIPT
-
7/31/2019 As NZS 4159.1-1994 Information Technology - Font Information Interchange Architecture
1/14
AS/NZS 4159.1:1994ISO/IEC 9541-1:1991ISO/IEC 9541-1:1991/Cor.1:1992
Australian/New Zealand Standard
Information technologyFontinformation interchange
Part 1: Architecture
-
7/31/2019 As NZS 4159.1-1994 Information Technology - Font Information Interchange Architecture
2/14
AS/NZS 4159.1:1994
This Joint Australian/New Zealand Standard was prepared by Joint Technical
Committee IT/1, Information SystemsInterconnection. It was approved on behalf of
the Council of Standards Australia on 12 October 1993 and on behalf of the Council
of Standards New Zealand on 22 April 1993. It was published on 21 March 1994.
The following interests are represented on Committee IT/1:
Australian Association of Permanent Building Societies
Australian Bankers Association
Australian Bureau of StatisticsAustralian Chamber of Commerce and Industry
Australian Committee of Directors and Principals
Australian Computer Society
Australian Computer Users Association
Australian Information Industry Association
Australian Telecommunications Users Group
Australian Vice Chancellors Committee
Department of Defence, Australia
Department of Industry, Technology and Commerce, Australia
Information Exchange Steering Committee, Australia
Institute of Information and Communication Technologies, CSIRO, Australia
Life Insurance Federation of AustraliaOPTUS Communications, Australia
Telecom Australia
Review of Standards. To keep abreast of progress in industry, Joint Australian/
New Zealand Standards are subject to periodic review and are kept up to date by theissue of amendments or new editions as necessary. It is important therefore thatStandards users ensure that they are in possession of the latest edition, and anyamendments thereto.
Full details of all Joint Standards and related publications will be found in theStandards Australia and Standards New Zealand Catalogue of Publications; thisinformation is supplemented each month by the magazines The Australian Standardand Standards New Zealand, which subscribing members receive, and which givedetails of new publications, new editions and amendments, and of withdrawnStandards.
Suggestions for improvements to Joint Standards, addressed to t he head office of ei therStandards Australia or Standards New Zealand, are welcomed. Notification of anyinaccuracy or ambiguity found in a Joint Australian/New Zealand Standard should bemade without delay in order that the matter may be investigated and appropriate actiontaken.
-
7/31/2019 As NZS 4159.1-1994 Information Technology - Font Information Interchange Architecture
3/14
AS/NZS 4159.1:1994
Australian/New Zealand Standard
Information technologyFontinformation interchange
Part 1: Architecture
First published as Joint Standard AS/NZS 4159.1:1994.
PUBLISHED JOINTLY BY:
STANDARDS AUSTRALIA1 The Crescent,Homebush NSW 2140 Australia
STANDARDS NEW ZEALANDLevel 10, Radio Ne w Zealand House,155 The Terrace,Wellington 6001 New Zealand
ISBN 0 7262 8695 8
-
7/31/2019 As NZS 4159.1-1994 Information Technology - Font Information Interchange Architecture
4/14
ii
PREFACE
This Standard was prepared by the Joint Australia/New Zealand Standards Committee IT/1, onInformation SystemsInterconnection. It is identical with, and has been reproduced from,
ISO/IEC 9541-1:1991, Information technology Font information interchange, Part 1: Architecture .
Technical Corrigendum 1:1992, is bound at the r ear of this Standard. T ext affected is marked by a
marginal bar.
This Joint Standard is one of a series of Open Systems Interconnection (OSI) Standards which arecurrently under development. Since OSI Standards are developmental, there may be some minor
difficulties encountered in their implementation. For this reason, Standards Australia will be
providing, through the OSI Help Desk, a service to coordinate and disseminate informationconcerning difficulties which are identified in using this Joint Standard.
Under arr angements made between Standards Australia/Standards New Zealand and the international
Standards bodies, ISO and I EC, as well as certain other Standards organizations, users of this JointStandard are advised of the following:
(a) In Australia, copyright is vested in Standards Australia. In New Zealand, copyright is vestedin Standards New Zealand.
(b) The number of this Joint Standard is not reproduced on each page; its identity is shown onlyon the cover and title pages.
For the purpose of this Joint Standard, the ISO/IEC text should be modified as follows:
(i) Terminology The words Australian Standard, New Zealand Standard or JointAustralian/New Zealand Standard should replace the words International Standard wherever
they appear.
(ii) References The references to International Standards should be replaced by references to thefollowing Australian/New Zealand Standards:
Refer ence to International Standard
or other Publication
Australian/New Zealand Standard
ISO AS
646 In for mation pr oce ss ing I SO 7- bitcoded character set for information
interchange
1776 Information processing7-bit codedcha ract er set f or inf or mat ion
interchange
3166 Codes for the representation of namesof countries
2632 Codes for the representation of namesof countries
6523 Data interchange Structures for the
identification of organizations
8824 I n fo r ma ti on te ch no lo gy O p enS y st e m s I n t e r con n ec t i on S p e ci -
fication of Abstract Syntax Notation
One (ASN.1)
3625 I n fo r ma ti on te ch no lo gy O p enS y st e m s I n t e r con n ec t i on S p e ci -
fication of Abstract Syntax Notation
One (ASN.1)
ISO/IEC AS/NZS
9070 I nf o rm a ti on t ec hn ol og y S G M Ls u pp o r t f a c i l i t ie s R e g i s tr a t i o n
procedures for public text owner
identifiers
4097 I nf or m at io n p roc es sin g S G MLs u pp o r t f a c i l i t ie s R e g i s tr a t i o n
procedures for public text owner
identifiers
-
7/31/2019 As NZS 4159.1-1994 Information Technology - Font Information Interchange Architecture
5/14
iii
ISO/IEC AS/NZS
9541 I n fo r m at io n t ec hn ol o gy F o ntinformation interchange
4159 I n fo r m at io n t ec hn ol o gy F o ntinformation interchange
9541-2 Pa rt 2: I nterc hange For mat 4159.2 Pa rt 2: I nterc hange for mat
Copyright STANDARDS AUSTRALIA/ STANDARDS NEW ZEALAND
Users of Standards are reminded that copyright subsists in all Standards Australia and Standards New Zealand publications and software.Except where the Copyright Act allows and except where provided for below no publications or software produced byStandards Australia or Standards New Zealand may be reproduced, stored in a retrieval system in any form or transmitted by any meanswithout prior permission in writing from Standards Australia or Standards New Zealand. Permission may be conditional on an appropriateroyalty payment. Australian requests for permission and information on commercial software royalties should be directed to the headoffice of Standards Australia. New Zealand requests should be directed to Standards New Zealand.
Up to 10 percent of the technical content pages of a Standard may be copied for use exclusively in-house by purchasers of theStandard without payment of a royalty or advice to Standards Australia or Standards New Zealand.
Inclusion of copyright material in computer software programs is also permitted without royalty payment provided such programsare used exclusively in-house by the creators of the programs.
Care should be taken to ensure that material used is from the current edition of the Standard and that it is updated whenever the Standard
is amended or revised. The number and date of the Standard should therefore be clearly identified.The use of material in print form or in computer software programs to be used commercially, with or without payment, or in commercialcontracts is subject to the payment of a royalty. This policy may be varied by Standards Australia or Standards New Zealand at any time.
-
7/31/2019 As NZS 4159.1-1994 Information Technology - Font Information Interchange Architecture
6/14
iv
CONTENTS
Page
1 S cope . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
2 Normative references . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
3 Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
4 Notation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
5 Data types . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
5.1 General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
5.2 Properties and property-lists . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
5.3 Values and value-l ists . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
5.4 Structured-names . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
5.4.1 ISO/IEC 9541 and ISO/IEC 10036 names . . . . . . . . . . . . . . . . . . . . . . . . . . 5
5.4.2 ICD0010 names . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
5.5Formal notation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6
6 Glyph identif ication . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
6.1 General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
6.2 ISO/IEC 10036 glyph names . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
6.3 ISO/IEC 10036 glyph registration authority . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
7 Glyph collection identification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
7.1 General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
7.2 ISO/IEC 10036 glyph collection names . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
7.3 ISO/IEC 10036 glyph collection registration authority . . . . . . . . . . . . . . . . . . . 9
8 Font resource . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
8.1 General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
8.1.1 Font resource name . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
8.1.2 Font resource description properties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
8.1.3 Font resource modal properties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
-
7/31/2019 As NZS 4159.1-1994 Information Technology - Font Information Interchange Architecture
7/14
v
Page
8.1.3.1 Writing mode properties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
8.1.3.2 Glyph metrics properties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
8.1.4 Glyph shape representation properties . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
8.1.5 Formal data type definition of a font resource . . . . . . . . . . . . . . . . . . . . . . 10
8.2 Glyph coordinate system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
8.3 Linear scaling model . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
8.4 Extensibil ity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
8.5 Specification of font resource name (FONTNAME) . . . . . . . . . . . . . . . . . . . . 13
8.6 Description of fon t resource description properti es (FONTDESCRIPTION) . . . 13
8.6.1 Data Version (DATAVERSION) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
8.6.2 Standard Version (STANDARDVERSION) . . . . . . . . . . . . . . . . . . . . . . . . . 14
8.6.3 Data Source (DATASOURCE) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
8.6.4 Data Copyright (DATACOPYRIGHT) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
8.6.5 Design Source (DSNSOURCE) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
8.6.6 Design Copyright (DSNCOPYRIGHT) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
8.6.7 Relative Rational Units (RELUNITS) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
8.6.8 Typeface Name (TYPEFACE) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
8.6.9 Font Family Name (FONTFAMILY) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
8.6.10 Posture (POSTURE) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
8.6.11 Posture Angle (POSTUREANGLE) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
8.6.12 Weight (WEIGHT) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
8.6.13 Proportionate Width (PROPWIDTH) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
8.6.14 Structure (STRUCTURE) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
8.6.15 Design Group (DSNGROUP) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
8.6.16 Glyph Complement (GLYPHCOMP) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
8.6.16.1 Number of Glyphs (NUMGLYPHS) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
8.6.16.2 Included Glyph Collections (INCGLYPHCOLS) . . . . . . . . . . . . . . . . . . . 20
8.6.16.3 Excluded Glyph Collections (EXCGLYPHCOLS) . . . . . . . . . . . . . . . . . . 20
8.6.16.4 Included Glyphs (INCGLYPHS) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
8.6.16.5 Excluded Glyphs (EXCGLYPHS) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
-
7/31/2019 As NZS 4159.1-1994 Information Technology - Font Information Interchange Architecture
8/14
vi
Page
8.6.17 Design Size, Recommended Minimum and Maximum Size
(DSNSIZE, MINSIZE, MAXSIZE) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
8.6.18 Capital Height (CAPHEIGHT) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
8.6.19 Lowercase Height (LCHEIGHT) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
8.6.20 Minimum Feature Size (MINFEATSZ) . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
8.6.21 Nominal Capital Stem Width (NOMCAPSTEMWIDTH) . . . . . . . . . . . . . . . 22
8.6.22 Nominal Lowercase Stem Width (NOMLCSTEMWIDTH) . . . . . . . . . . . . . . 23
8.6.23 Nominal Writing Mode (NOMWRMODE) . . . . . . . . . . . . . . . . . . . . . . . . . . 23
8.7 Specification of font resource modal properties (WRMODES) . . . . . . . . . . . . 23
8.7.1 Writing Mode (WRMODE) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
8.7.1.1 Writing Mode Name (WRMODENAME) . . . . . . . . . . . . . . . . . . . . . . . . . . 26
8.7.1.2 Nominal Escapement Direction (NOMESCDIR) . . . . . . . . . . . . . . . . . . . . 26
8.7.1.3 Escapement Class (ESCCLASS) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
8.7.1.4 Average Escapement (AVGESCX, AVGESCY) . . . . . . . . . . . . . . . . . . . . 27
8.7.1.5 Average Lowercase Escapement (AVGLCESCX, AVGLCESCY) . . . . . . . . 27
8.7.1.6 Average Capital Escapement (AVGCAPESCX, AVGCAPESCY) . . . . . . . . 28
8.7.1.7 Tabular Escapement (TABESCX, TABESCY) . . . . . . . . . . . . . . . . . . . . . 28
8.7.1.8 Maximum Font Extents (MAXFONTEXT) . . . . . . . . . . . . . . . . . . . . . . . . . 28
8.7.1.9 Sectors-Pairwise Escapement Adjustment Descriptions (SECTORS) . . . . 29
8.7.1.10 Escapement Adjustments (ESCADJS) . . . . . . . . . . . . . . . . . . . . . . . . . . 29
8.7.1.10.1 Escapement Adjustment (ESCADJ) . . . . . . . . . . . . . . . . . . . . . . . . . . 30
8.7.1.10.1.1 Escapement Adjustment Mode Name (ESCADJNAME) . . . . . . . . . . . 30
8.7.1.10.1.2 Class-Pairwise Escapement Adjustments (CPEA) . . . . . . . . . . . . . . 30
8.7.1.10.1.3 Scale Escapement Correction (SEC) . . . . . . . . . . . . . . . . . . . . . . . . 32
8.7.1.11 Recommend ed Pai rwise Escapement Adjustment Size(MINESCADJSZE, MAXESCADJSZE) . . . . . . . . . . . . . . . . . . . . . . . . . . 33
8.7.1.12 Scores (SCORES) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
8.7.1.12.1 Score (SCORE) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
8.7.1.12.1.1 Score Name (SCORENAME) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
8.7.1.12.1.2 Score Position Offset (SCOREOFFSETX, SCOREOFFSETY) . . . . . . 35
-
7/31/2019 As NZS 4159.1-1994 Information Technology - Font Information Interchange Architecture
9/14
vii
Page
8.7.1.12.1.3 Score Thickness (SCORETHICK) . . . . . . . . . . . . . . . . . . . . . . . . . . 35
8.7.1.13 Variant Scripts (VSCRIPTS) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
8.7.1.13.1 Variant Script (VSCRIPT) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
8.7.1.13.1.1 Variant Script Name (VSNAME) . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
8.7.1.13.1.2 Variant Script Position Offset (VSOFFSETX, VSOFFSETY) . . . . . . . 36
8.7.1.13.1.3 Variant Script Anamorphic Scale Factors (VSSCALEX, VSSCALEY) . 37
8.7.1.14 Recommended Minimum Alignment Line-to-Line Spacing Distance(MINLINESP) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
8.7.1.15 Recommended Minimum and Maximum Anamorphic Scale Factors
(MINANASCALE, MAXANASCALE) . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
8.7.1.16 Nominal Alignment Mode (NOMALIGN) . . . . . . . . . . . . . . . . . . . . . . . . . 38
8.7.1.17 Alignment Modes (ALIGNMODES) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
8.7.1.17.1 Alignment Mode (ALIGN) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
8.7.1.17.1.1 Alignment Mode Name (ALIGNNAME) . . . . . . . . . . . . . . . . . . . . . . . 39
8.7.1.17.1.2 Alignment Line Position Offset (ALIGNOFFSETX, ALIGNOFFSETY) . 40
8.7.1.17.1.3 Alignment Mode Anamorphic Scale Factors (ALIGNSCALEX,
ALIGNSCALEY) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
8.7.1.18 Copy Fit Techniques (COPYFITS) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
8.7.1.18.1 Copy Fit Technique (COPYFIT) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
8.7.1.18.1.1 Copy Fit Technique Name (COPYFITNAME) . . . . . . . . . . . . . . . . . . 42
8.7.1.18.1.2 Copy Fit Measure (COPYFITMEASURE) . . . . . . . . . . . . . . . . . . . . . 42
8.7.1.19 Design, Recommended Minimum and Maximum Wordspace Adjustments(DSNWORDADD, DSNWORDAMPL, MINWORDADD,MINWORDAMPL, MAXWORDADD, MAXWORDAMPL) . . . . . . . . . . . . . 42
8.7.1.20 Design, Recommended Minimum and Maximum Letterspace Adjustments(DSNLETTERADD, DSNLETTERAMPL, MINLETTERADD,MINLETTERAMPL, MAXLETTERADD, MAXLETTERAMPL) . . . . . . . . . . 43
8.8 Specification of font resource glyph metrics properties (GLYPHMETRICS) . . . 44
8.8.1 Glyph Metric (GMETRIC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
8.8.1.1 Glyph Name (GNAME) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
8.8.1.2 Glyph Position and Escapement Points (PX, PY, EX, EY) . . . . . . . . . . . . 45
-
7/31/2019 As NZS 4159.1-1994 Information Technology - Font Information Interchange Architecture
10/14
viii
Page
8.8.1.3 Glyph Extents (EXT) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
8.8.1.4 Glyph Ligature Relationships (LGS) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
8.8.1.4.1 Ligature (LG) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
8.8.1.4.1.1 Ligature Name (LGN) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
8.8.1.4.1.2 Ligature Successor Names (LGSN) . . . . . . . . . . . . . . . . . . . . . . . . . . 49
8.8.1.5 Glyph Pairwise Escapement Adjustments (PEAS) . . . . . . . . . . . . . . . . . . 49
8.8.1.5.1 Pairwise Escapement Adjustment (PEA) . . . . . . . . . . . . . . . . . . . . . . . 49
8.8.1.5.1.1 Pairwise Escapement Adjustment Name (PEAN) . . . . . . . . . . . . . . . . 50
8.8.1.5.1.2 Pairwise Escapement Adjustment (PEAX, PEAY) . . . . . . . . . . . . . . . . 50
8.8.1.5.1.3 Sector-Pairwise Escapement Adjustment Extents (SPEAFORWDX,
SPEAFORWDY, SPEABACKWDX, SPEABACKWDY) . . . . . . . . . . . . 51
8.8.1.6 Class-Pairwise Escapement Adjustment Class Indicator (CPEAI) . . . . . . . 52
8.8.1.7 Escapement Adjustment Indicator (EAI) . . . . . . . . . . . . . . . . . . . . . . . . . 53
8.8.1.8 Minimum and Maximum Adjusted Escapement (MINEX, MINEY,MAXEX, MAXEY) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Annexes
A Typeface design grouping . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
B Font concepts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
B.1 General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
B.2 Font resource environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
B.2.1 Font production . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
B.2.2 Font resource installation, storage and access . . . . . . . . . . . . . . . . . . . . . 76
B.3 Application environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
B.3.1 Text processing systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
B.3.2 Document processing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
B.3.2.1 Document editing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
B.3.2.2 Document formatting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
B.3.2.3 Document presentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78
B.3.3 Font referencing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78
B.3.4 Glyph referencing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78
B.3.5 Glyph positioning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78
-
7/31/2019 As NZS 4159.1-1994 Information Technology - Font Information Interchange Architecture
11/14
ix
Page
B.3.6 Glyph shape presentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
Alphabetical index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80
-
7/31/2019 As NZS 4159.1-1994 Information Technology - Font Information Interchange Architecture
12/14
x
NOTES
-
7/31/2019 As NZS 4159.1-1994 Information Technology - Font Information Interchange Architecture
13/14
-
7/31/2019 As NZS 4159.1-1994 Information Technology - Font Information Interchange Architecture
14/14
This is a free preview. Purchase the entire publication at the link below:
Looking for additional Standards? Visit SAI Global Infostore
Subscribe to ourFree Newsletters about Australian Standards in Legislation; ISO, IEC, BSI and more
Do you need to Manage Standards Collections Online?
Learn about LexConnect, All Jurisdictions, Standards referenced in Australian legislation
Do you want to know when a Standard has changed?
Want to become an SAI Global Standards Sales Affiliate?
Learn about other SAI Global Services:
LOGICOM Military Parts and Supplier DatabaseMetals Infobase Database of Metal Grades, Standards and Manufacturers
Materials Infobase Database of Materials, Standards and Suppliers
Database of European Law, CELEX and Court Decisions
Need to speak with a Customer Service Representative - Contact Us
AS/NZS 4159.1:1994, Information technology -Font information interchange Architecture
http://infostore.saiglobal.com/store?utm_source=PDF&utm_medium=Website_Infostore&utm_campaign=DocSharingSiteshttp://www.saiglobal.com/Information/Standards/Newsletters/?utm_source=PDF&utm_medium=Website_Infostore&utm_campaign=DocSharingSiteshttp://www.saiglobal.com/Information/Standards/Collections/?utm_source=PDF&utm_medium=Website_Infostore&utm_campaign=DocSharingSiteshttp://www.saiglobal.com/Information/Standards/Law/?utm_source=PDF&utm_medium=Website_Infostore&utm_campaign=DocSharingSiteshttp://www.saiglobal.com/Information/Standards/StandardsWatch/?utm_source=PDF&utm_medium=Website_Infostore&utm_campaign=DocSharingSiteshttp://www.saiglobal.com/Information/Standards/Affiliate/?utm_source=PDF&utm_medium=Website_Infostore&utm_campaign=DocSharingSiteshttp://www.saiglobal.com/Information/Standards/Databases/LOGICOM/?utm_source=PDF&utm_medium=Website_Infostore&utm_campaign=DocSharingSiteshttp://www.saiglobal.com/Information/Standards/Databases/LOGICOM/?utm_source=PDF&utm_medium=Website_Infostore&utm_campaign=DocSharingSiteshttp://www.saiglobal.com/Information/Standards/Databases/Metals/?utm_source=PDF&utm_medium=Website_Infostore&utm_campaign=DocSharingSiteshttp://www.saiglobal.com/Information/Standards/Databases/Materials/?utm_source=PDF&utm_medium=Website_Infostore&utm_campaign=DocSharingSiteshttp://www.saiglobal.com/Information/Standards/Databases/European-Law/?utm_source=PDF&utm_medium=Website_Infostore&utm_campaign=DocSharingSiteshttp://infostore.saiglobal.com/store/getpage.aspx?path=/InformationServices/shop/pages/ContactingUs.htm&utm_source=PDF&utm_medium=Website_Infostore&utm_campaign=DocSharingSiteshttp://infostore.saiglobal.com/store/Details.aspx?ProductId=377395&utm_source=PDF&utm_medium=Website_Infostore&utm_campaign=DocSharingSiteshttp://infostore.saiglobal.com/store/getpage.aspx?path=/InformationServices/shop/pages/ContactingUs.htm&utm_source=PDF&utm_medium=Website_Infostore&utm_campaign=DocSharingSiteshttp://www.saiglobal.com/Information/Standards/Databases/European-Law/?utm_source=PDF&utm_medium=Website_Infostore&utm_campaign=DocSharingSiteshttp://www.saiglobal.com/Information/Standards/Databases/Materials/?utm_source=PDF&utm_medium=Website_Infostore&utm_campaign=DocSharingSiteshttp://www.saiglobal.com/Information/Standards/Databases/Metals/?utm_source=PDF&utm_medium=Website_Infostore&utm_campaign=DocSharingSiteshttp://www.saiglobal.com/Information/Standards/Databases/LOGICOM/?utm_source=PDF&utm_medium=Website_Infostore&utm_campaign=DocSharingSiteshttp://www.saiglobal.com/Information/Standards/Affiliate/?utm_source=PDF&utm_medium=Website_Infostore&utm_campaign=DocSharingSiteshttp://www.saiglobal.com/Information/Standards/StandardsWatch/?utm_source=PDF&utm_medium=Website_Infostore&utm_campaign=DocSharingSiteshttp://www.saiglobal.com/Information/Standards/Law/?utm_source=PDF&utm_medium=Website_Infostore&utm_campaign=DocSharingSiteshttp://www.saiglobal.com/Information/Standards/Collections/?utm_source=PDF&utm_medium=Website_Infostore&utm_campaign=DocSharingSiteshttp://www.saiglobal.com/Information/Standards/Newsletters/?utm_source=PDF&utm_medium=Website_Infostore&utm_campaign=DocSharingSiteshttp://infostore.saiglobal.com/store?utm_source=PDF&utm_medium=Website_Infostore&utm_campaign=DocSharingSites