INSTRUCTION MANUAL

AIRBRUSH COMPRESSOR AS-176

Thanks for purchasing our airbrush compressor and please read

this Instruction Manual carefully and thoroughly before operating

the tool to get best performance.

、

2

The compressor is suitable for make up, tanning, tattoo, hobbies/model,fingernail painting, Bakery and so on. Specification: ·Voltage: 100V/l15V/220V-240V ·Prower: 1/6HP ·Auto stop pressure: 45PSI (3.1bar) ·Auto start pressure: 30PSI (2.1bar) ·Pressure adjustable range: 0-3 BAR ·Air flow: 20-23L/Min ·Air Tank: 0.3L ·Noise Level: 47 db ·Dimension: 160X150X175 MM ·N.W. 2.7KG ·Air outlet: 1/8" BSP (Other specification available) Feature: ·Oil-less Piston type ·Auto stop Function ·Working pressure adjustor ·Pressure gauge ·Continuous working ·Small air tank inside ·Thermally overload protected · Light on/off switch ·Air inlet filter and air outlet filter · Airbrush holder ·Accessory inside: 1 pcs 1.8M air hose with mini air filter

The connections between compressor and hose connector are not always airtight. 100% air

tightness is, however, only absolutely essential in the case of automatic models. Teflon tape can

be used to prevent leakage. This elastic tape is available in all stores selling sanitary products. 1. Please choose the compressor with accordingly voltage frequency and plug to suitable for

local market. 2. Do not touch the electrical source with wet hand.

3. Application Caution:

2. Hose Connections

1. Application Field:

3

3. Use the compressor in a dry, clean and adequately ventilated area. Avoid using the compressor in high temperature, high corrosive, and damp area.

4. Do not take this compressor as children toy, and do not insert any eyewinker into the compressor.

5. When finish the use of the air compressor, please put off the side on/off switch until the light is off.

6. After finishing the work, please clean the airbrush. Empty the moisture in air hose. And store all these tools in a ventilated and dry place.

4. Spare Part List:

4

PARTS NO DESCRIPTTON Q TY PARTS NO DESCRIPTTON Q TY

AS-176 #01 HANDLE 1 AS-176 #31 AIR HOSE 1

AS-176 #02 SET SCREW 2 AS-176 #32 PRESSURE REGULATOR 1

AS-176 #03 NUT 2 AS-176 #33 AIR OUTLET 1

AS-176 #04 BODY 1 AS-176 #34 PRESSURE GAUGE 1

AS-176 #05 REAR BODY LID 1 AS-176 #35 AIRBRUSH HOLDER 1

AS-176 #06 SET SCREW 10 AS-176 #36 NUT 1

AS-176 #07 RUBBER STAND 4 AS-176 #37 SCREW 1

AS-176 #08 SET SCREW 1 AS-176 #38 CUSHION 1

AS-176 #09 LOCK PLATE 1 AS-176 #39 SPRING 1

AS-176 #10 COMPRESSION RING 1 AS-176 #40 GASKET 1

AS-176 #11 CONNECTING ROD 1 AS-176 #41 MEMBRANE 1

AS-176 #12 COUNTERWEIGHT 1 AS-176 #42 PRESSURE SWITCH 1

AS-176 #13 MOTOR 1 AS-176 #43 VALVE BODY 1

AS-176 #14 RUBBER BASE 4 AS-176 #44 VALVE 1

AS-176 #15 SET SCREW 4 AS-176 #45 VALVE ROD 1

AS-176 #16 CAPACITANCE 1 AS-176 #46 SPRING 1

AS-176 #17 SET SCREW 2 AS-176 #47 O-RING 1

AS-176 #18 NUT 2 AS-176 #48 INLET VALVE ROB 1

AS-176 #19 COOLING FAN 1 AS-176 #49 PLASTIC CLIP 1

AS-176 #20 CYLINDER BLOCK 1 AS-176 #50 O-RING 1

AS-176 #21 O-RING 1 AS-176 #51 RETAINIER RING 1

AS-176 #22 IN-OUT VALVE 2 AS-176 #52 ADPTOR 1

AS-176 #23 CYLINDER HEAD 1 AS-176 #53 RUBBER COAT 11

AS-176 #24 SET SCREW 4 AS-176 #54 AIR FILTER HOUSING 1 1

AS-176 #25 AIR OUTLET HOSE 1 AS-176 #55 SPONGE 1

AS-176 #26 AIR HOSE 2 AS-176 #56 FILTER CARTRIDGE 1

AS-176 #27 PLUG 1 AS-176 #57 AIR FILTER HOUSING 2 1

AS-176 #28 CABLE PROTECTOR 1 AS-176 #58 HOSE CLAMP 4

AS-176 #29 LIGHT ON/OFF SWITCH 1 AS-176 #59 AIR TANK 1

AS-176 #30 FRONT BODY LID 1 AS-176 #60

5

A. On/Off switch

B. Front body lid

C. Pressure adjustment knob

D. Hose Connector

E. Pressure gauge

F. Handle

G. Airbrush holder

H. Air tank inside

I. Power plug

5. Air Compressor Structure