Arte-AR111

Category: The Arte-AR-111 is part of a series of highly engineered spotlights with beautifully machined brushed finishes and a clean architectural design. Exclusively designed to accommodate the new Soraa AR-111 LED lamp either in an open design for use with Soraa’s optional “Snap-On” Media or with Tegan’s Media Holder that will accommodate up to three (3) media.

Spotlight: Arte-AR-111.

Material: Machined aluminum.

Finish: Brushed Aluminum (AL), Black (BLK), or White (WH).

Systems: Arte-AR-111 is used with one of Tegan’s versatile connectors (Spot connector is specified separately) that will enable easy connection to the full range of Systems and Monopoints: Centro Trac System (CTS), Monopoint Recessed Flat Plate - Remote Power Supply (MPRFP-RP), Monopoint Recessed Trimless - Remote Power Supply (MRTL-RP, Monopoint Panel Mount - Remote Power Supply (MPPM-RP), Single Recessed Enclosure Monopoint (MP-1-RE), Double Recessed Enclosure Monopoint (MP-2-RE), Round J-Box Mount Monopoint - Integral Transformer 120V/277V (MPJ-IT80-120/277), Round J-Box Monopoint - Remote Power Supply (MP-RD-JB), Square J-Box Mount Monopoint - Integral Transformer (MPSQ-IT). Refer to linked System Spec Sheets and Installation Sheets for more detail.

Connectors: System Connectors are used with Spotlight as specified. Refer to page 3.

Adjustment: Smooth, 360° bearing rotation with 90° locking vertical adjustment.

Source: One Soraa (only) 18.5W (max) or 12.5W AR-111 LED 12VAC lamp with G53 base or lamp by others. Contact factory to order Soraa AR-111 LED lamps and “Snap-On” Media. NOTE: For dimming LED AR-111 lamps (Soraa) with 12VAC transformers, please refer to page 3 of the AR-111 Lamp Specsheet.

Power Supply: Refer to Spec Sheet 13 for Power Supply options.

Installation: There is a locking mechanism in the Spot base to secure the AR111 lamp. Tegan’s optional Media Holder is secured to the Soraa lamp with set screws (2). For system layout, and specification assistance, refer to the Trac Design Guide under the Gallery link.

Accessories: Arte-AR-111 Media Holder X 3 (AARMHx3), Arte-AR-111 Honeycomb Louver - Black (AARHCLB), Arte-AR-111 Prismatic Lens (AARPL), Arte-AR-111 Sandblasted Lens (AARSBL), Arte-AR-111 Linear Spread Lens (AARLSL), Arte-AR-111 Softening Lens (AARSFL), Arte-AR-111 Solite Lens (AARSOL). UV lenses - Contact factory. 72” Spot Extension (SpotExt72), 72” Double Spot Extension (DSpotExt72).

Labels: ETL & CE Listed; Tested to UL 1574 - Issue: 2004/09/07 Ed: 3 Rev:2012/01/25 UL Standard for Safety Track Lighting Systems. IP20. Interior use only. In a continuing effort to offer the best product possible we reserve the right to change, without notice, specifications or materials. Technical specification sheets that appear on teganlighting.com are the most recent version and supersede all other versions that exist in any other printed or electronic form. 3 Year Warranty.

90˚ 360˚Available

AccessoriesIP

HALOGEN

AR 111 LED

Exclusive with Soraa’s AR-111 LED!

teganlighting.com • info@teganlighting.com • (415) 504-3536 • TG20 6/9/20 1

IP20 12VAC Spotlight - AR-111 LED

Arte-AR111 IP20 12VAC Spotlight - AR-111 LED

Arte-AR-111 - Spotlight

CLICK

TWIST

The Twist & Click system allows the Spotlights to be easily removed. The Spotlights click into the jack plug socket, the threaded jacket then screws into position to lock the connection in place. Once fixed, the luminaires are free to rotate or can be secured using two locking pins. Supplied separately.

Twist & Click System

The Arte-AR-111 Spotlight was designed for exclusive use with the Soraa AR-111 LED lamp, combining design excellence with precision engineer-ing. It also features excellent beam control with the use of Media. Shown with optional Media Holder; ordered separately. Refer to Accessories for details.

Arte-AR-111 (Arte-AR-111-AL)

teganlighting.com • info@teganlighting.com • (415) 504-3536 • TG20 6/9/20 2

95mm(3 -3/4”)

ø119mm(4 -11/16”)

146mm(5 -3/4”)

Optional Media Holder

Arte-AR111 - Mounting System Order Guide - Mounting Options shown separately

Arte-AR111 Spot - No Connector for Monopoint Mounting Arte-AR111, Brushed Aluminum, White or Black Finish (Arte-AR111-AL/BLK/WH).

Arte-AR111 Spot - with Straight Connector Centro Trac Mounting Arte-AR111, Centro Trac Connector, Brushed Aluminum Finish (Arte-AR111-CTC-AL).Accommodates 3 Media. Add Desired Media to end of catalog # above.

Arte-AR111 Spot - with 90° Connector Centro Trac Mounting Arte-AR111, Centro 90° Connector, Brushed Aluminum Finish (Arte-AR111-C90C-AL).Accommodate 3 Media. Add Desired Media to end of catalog # above. * C90C is for Direct Wall Mount System

Accessories for Arte-AR111 Spot - Add to the end of the Catalog #’s above as detailed below. Arte-QR111 Media Holder 3, Brushed Aluminum, Black or White Finish (AARMHX3-AL/BLK/WH)Honeycomb Louver (AARHCLB-16) Prismatic Lens 16 (AARPL-16) Sandblasted Lens (AARSBL-16)Linear Spread Lens 16 (AARLSL-16)Softening Lens 16 (AARSFL-16)Solite Lens (AARSOL50-16)72” Spot Extension (SpotExt72) 72” Double Spot Extension (DSpotExt72)

Arte-AR111

teganlighting.com • info@teganlighting.com • (415) 504-3536 • TG20 6/9/20 3

Arte-AR111 - System Connectors

ø19mm(3/4”)

25mm(1”)

ø19mm(3/4”)

25mm(1”)

Straight Connector for Centro Trac system. Brushed Aluminum (AL) finish. Supplied separately as specified.

25mm (1”)

ø19mm (3/4”)

ø19mm(3/4”)

25mm(1”)

90° Connector for Centro Trac System. Brushed Aluminum (AL) finish. 90° off of ceiling mount Trac or wall mount application. Supplied sepa-rately as specified.

Centro Trac Connector (CTC) Centro 90° Connector (C90C)

Arte-AR-111; Aluminum finish (AL), rear view with Tegan Media Holder.

Arte-AR-111; Aluminum finish (AL), front view with two Soraa Snap-On Media. No Media Holder.

Arte-AR-111; Aluminum Finish (AL), side view with two Soraa Snap-On Media. No Media Holder.

Arte-AR-111 with Flat Plate Monopoint; White finish (WH), side view with Tegan Media Holder.

Arte-AR-111 - Spotlight

IP20 12VAC Spotlight - AR-111 LED

Can accommodate up to three (3) Media. Aluminum (AL), Black (BLK), or White (WH) finish options.

1/8” Hexcell black metal. Controls spill illumina-tion and glare.

Creates a symmetrical broadening of the lamp beam.

Arte-AR111 - Accessories

ø108mm(4 -1/4”)

ø108mm(4 -1/4”)

Arte-AR-111 Media Holder 3 (AARMHX3)

Arte-AR-111 Honeycomb Louver (AARHCLB)

Arte-AR-111 Prismatic Lens (AARPL )

ø57

11

ø119mm(4 -11/16”)

11mm(7/16”)

Creates an uniform beam pattern that is useful for wall washing.

Will extend the lamp’s beam along one axis, allowing hightlighting of wider areas from a single fixture.

Smooths and widens irregular beam pattern.

ø108mm(4 -1/4”)

ø108mm(4 -1/4”)

ø108mm(4 -1/4”)

Arte-AR-111 Sandblasted Lens (AARSBL)

Arte-AR-111 Linear Spread Lens (AARLSL)

Arte-AR-111 Softening Lens (AARSFL)

Arte-AR111

teganlighting.com • info@teganlighting.com • (415) 504-3536 • TG20 6/9/20 4

Tempered low-iron optically clear glass with a stipple effect that provides obscurity while retaining high transmission values and minimal absorption.

ø108mm(4 -1/4”)

Arte-AR111 Solite Lens (AARSOL)

IP20 12VAC Spotlight - AR-111 LED

Arte-AR111 - Accessories

81mm(3 3/16’)

ø24mm(15/16”)

1.8m(72”)

1.8m(72”)

72” Spot Stem Extension, Aluminum, Black or White Finish (SpotExt72-AL, BLK or WH)Spot Stem Extension for use with Centro Trac Systems and Monopoints. Attaches to the Arte Spot or an extension up to 72”. Spot Extensions can be shortened in the field or at the factory for an additional cost. Note: A Sloped Ceiling Adapter must be added for use in Sloped Ceilings with Monopoints; refer to the Monopoint Specification Sheets under “Accesso-ries” for details. Refer to Installation Instructions for details.

72” Double Spot Extension, Aluminum or Black Finish (DSpotExt72-AL, BLK or WH)Double Spot Extension for mounting two spotlights. Attaches to the Lia Spot with an extension up to 72”. The Double Spot Extension can be shortened in the field or at the factory for an additional cost. Note: Due to the weight of the Spots, the Double Spot Extension cannot be used for sloped ceiling applications with Monopoints; contact factory for special order options. Refer to Installation Instructions for details.

72” Spot Extension (SpotExt72)

72” Double Spot Extension (DSpotExt72)