art. no. dia. (mm) length (mm) flute (mm) pack qty · applications - switch boxes, metal studs,...
TRANSCRIPT
Extra Length Series for metal. Right hand drilling. DIN 340, Type N. Optimal drilling capacity with
exceptionally long tool life.
Long Series for metal. Right hand drilling. DIN 340, Type N. Optimal drilling capacity with
exceptionally long tool life.
Art. No. Dia. (mm) Length (mm) Flute (mm) Pack Qty 0629 25 2.5 95 62 10 0629 30 3.0 100 66 10 0629 32 3.2 106 69 10 0629 35 3.5 112 73 10 0629 40 4.0 119 78 10 0629 42 4.2 119 78 10 0629 43 4.3 126 82 10 0629 45 4.5 126 82 10 0629 48 4.8 132 87 10 0629 50 5.0 132 87 10 0629 55 5.5 139 91 10 0629 60 6.0 139 91 10 0629 65 6.5 148 97 10 0629 70 7.0 156 102 5 0629 75 7.5 156 102 5 0629 80 8.0 165 109 5 0629 85 8.5 165 109 5 0629 90 9.0 175 115 5 0629 100 10.0 184 121 5 0629 105 10.5 184 121 5 0629 110 11.0 195 128 5 0629 115 11.5 195 128 1 0629 120 12.0 205 134 1 0629 130 13.0 205 134 1
01 0
2 - J
DS 0
1/14
Rep
rodu
ctio
n, e
ven
in p
art,
proh
ibite
d. P
rinte
d in
UK
Art. No. Dia. (mm) Length (mm) 0629 00140 4.0 175 0629 00145 4.5 185 0629 00150 5.0 195 0629 00160 6.0 205 0629 00180 8.0 240 0629 001100 10.0 265
ALL EXTRA LENGTH DRILLS PACKED AS SINGLES - LEAD TIMES MAY BE APPLICABLE
DIN 338, Rolled, Type N
Manufactured to ISO/DIN Standard. 118° Drill Point. A good general purpose jobber drill. Roll forged to provide toughness. Can be used on portable and hand held
machines for many applications. Ideal for use in wood and plastic. Art. No. Ø mm Length mm Shank mm Pack Qty
0625 10 1.0 34 12 10 0625 15 1.5 40 18 10 0625 20 2.0 49 24 10 0625 25 2.5 57 30 10 0625 30 3.0 61 33 10 0625 35 3.5 70 39 10 0625 40 4.0 75 43 10 0625 45 4.5 80 47 10 0625 50 5.0 86 52 10 0625 55 5.5 93 57 10 0625 60 6.0 93 57 10 0625 65 6.5 101 63 10 0625 70 7.0 109 69 10 0625 75 7.5 109 69 10 0625 80 8.0 117 75 5 0625 85 8.5 117 75 5 0625 90 9.0 125 81 5 0625 95 9.5 125 81 5
0625 100 10.0 133 87 5 0625 105 10.5 133 87 5 0625 110 11.0 142 94 5 0625 115 11.5 142 94 5 0625 120 12.0 151 101 5 0625 125 12.5 151 101 5 0625 130 13.0 151 101 5
RECA HSS Twist Drills Long Series
Extra Length HSS Drills
HSS Jobber Drills
01 02 01 02
Drill Set
1 - 13mm set. 0.5mm increments. 25 pieces. Art. No. 0625 013
01 0
3 - J
DS 0
1/14
Rep
rodu
ctio
n, e
ven
in p
art,
proh
ibite
d. P
rinte
d in
UK
RECA HSS Drill Cassettes
Plus replacement top ups. Saving you time and money.
HSS Drill cassettes give you 2 of each of your popular small diameters (1.0mm to 5.0mm). The drills come in a robust metal case that will protect your bits, numbered in size order for easy reference. The cassette also includes a centre punch for easier starting on difficult surfaces.
Drills are manufactured to DIN 338 from top quality High Speed Steel. Suitable for most metal and even stainless steel with cobalt drills. All sets are colour coded for easy reference and storage.
Increment 0.5 mm ¹ Increment 0.1 mm ² Includes tapping size drills
Refill Packet for Plus Cassettes
Art. No. Description Material Range of Drill Sizes (mm)
No. of Drills
0624 001 RECA HSS Twist Drill Refill Steel 2 of each from 1.0 to 5.0mm 1 of each from 5.5 to 7.5mm
23
Art. No Description Range of Drill Sizes (mm)
No. of Pieces
0624 004 113 RECA HSS Plus Cassette 1.0 to 13.0 35 0624 004 007 ¹ RECA HSS Plus Cassette 1.0 to 5.9 50 0624 004 009 ² RECA HSS Plus Cassette 1.0 to 10.5 30 0624 004 110 RECA HSS Plus Cassette 1.0 to 10.0 29
Manufactured to DIN 1897. Right-hand cutting for most metals. No centre punching required. Does not drift from drilling location. Ideal for drilling thin materials.
Art. No Dia. (mm) Length (mm) Flute (mm) 0635 25 2.50 43 14 0635 30 3.00 46 16 0635 32 3.20 49 18 0635 33 3.30 49 18 0635 35 3.50 52 20 0635 40 4.00 55 22 0635 41 4.10 55 22 0635 42 4.20 55 22 0635 45 4.50 58 24 0635 48 4.80 62 26 0635 49 4.90 62 26 0635 50 5.00 62 26 0635 51 5.10 62 26 0635 52 5.20 62 26 0635 55 5.50 66 28 0635 60 6.00 66 28 0635 80 8.00 79 37 0635 100 10.00 89 43
Box Qty 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10
Right-hand cutting for most metals. Effectively 20 drills in one pack of 10. No centre punch required. Does not drift from drilling location. Ideal for drilling thin materials.
Art. No. Dia. (mm) Length (mm) Flute (mm) Box Qty 0636 30 3.00 46 10.6 10 0636 32 3.20 49 11.2 10 0636 33 3.30 49 11.2 10 0636 35 3.50 52 12.5 10 0636 40 4.00 55 14.0 10 0636 41 4.10 55 14.0 10 0636 42 4.20 55 14.0 10 0636 50 5.00 62 17.0 10 0636 51 5.10 62 17.0 10 0636 55 5.50 66 19.0 10 0636 60 6.00 66 19.0 10 0636 65 6.50 70 21.2 10
Stub HSS Twist Double End HSS Twist
01 03 01 03
Cobalt Drill Sets
RECA Morse Taper Shank Drills HSS DIN 345. 18° standard point. The Morse taper allows the drill to be mounted directly
into the spindle of the machine. Therefore giving higher torque transmission into the work piece.
Mainly used with column type machines like bench, pedestal and floor drills.
Suitable for drilling of steel and cast steel (alloy or non alloy), grey iron and malleable cast iron.
Range available from 12 to 26mm. Larger sizes from 26mm available in MT3/4 on request.
Morse Taper Drill Sleeve To reduce hole size of machine spindle where the drill shank is smaller than the spindle hole.
Drift Key Used to help ejection of tapered tools from machine spindles, quick and easy.
01 0
4 - V
Y 06
/16
Repr
oduc
tion,
eve
n in
par
t, pr
ohib
ited.
Prin
ted
in U
K
Art. No. Ø mm Length mm Flute mm MT 0628 120 12.00 182 101 1 0628 130 13.00 182 101 1 0628 140 14.00 189 108 1 0628 145 14.50 212 114 2 0628 150 15.00 212 114 2 0628 155 15.50 218 120 2 0628 160 16.00 218 120 2 0628 165 16.50 223 125 2 0628 170 17.00 223 125 2 0628 175 17.50 228 130 2 0628 180 18.00 228 130 2 0628 190 19.00 233 135 2 0628 200 20.00 238 140 2 0628 210 21.00 243 145 2 0628 220 22.00 248 150 2 0628 250 25.00 281 160 3 0628 260 26.00 286 165 3
Art. No. MT Outside MT Inside
3650 548 21 2 1
3650 548 32 3 2 Art. No Size
3650 562 12 MT1 & 2
3650 562 3 MT3
RECA HSS Cobalt Drills RECA offer a full range of HSS Cobalt drill bits, all are ground flute and manufactured from 100% high quality blanks. A point angle of 118° ensures pinpoint accuracy on many surfaces and a diameter tolerance of h8 guarantees quality and precision.
Feature Advantage Benefit Professional development of INOX Geometry to
optimise performance on stainless / high quality steel
Optimum drilling precision and cleanness due to pin-point accuracy
Maximum performance and precision
Stronger drill core Higher stability for better strength More balanced drill bit for hand
drilling drivers
Special alloy containing more cobalt Increased heat stability that decreases
overheating High precision even at maximum
operational limits INOX twist profile in connection with
special helix Smooth drilling
Improved swarf removal, less jamming
Art. No. Dia. mm Overall Length
Spiral Length
Box Qty
0621 065 6.50 101 63 5 0621 070 7.00 109 69 5 0621 075 7.50 109 69 5 0621 080 8.00 117 75 1 0621 085 8.50 117 75 1 0621 090 9.00 125 81 1 0621 095 9.50 125 81 1 0621 100 10.00 133 87 1 0621 105 10.50 133 87 1 0621 110 11.00 142 94 1 0621 115 11.50 142 94 1 0621 120 12.00 151 101 1 0621 125 12.50 151 101 1 0621 130 13.00 151 101 1
Art. No. Dia. mm Overall Length
Spiral Length
Box Qty
0621 010 1.00 34 12 10 0621 015 1.50 40 18 10 0621 020 2.00 49 24 10 0621 025 2.50 57 30 10 0621 030 3.00 61 33 10 0621 032 3.20 65 36 10 0621 033 3.30 65 36 10 0621 035 3.50 70 39 10 0621 040 4.00 75 43 10 0621 042 4.20 75 43 5 0621 045 4.50 80 47 5 0621 050 5.00 86 52 5 0621 055 5.50 93 57 5 0621 060 6.00 93 57 5
01 04 01 04
Art. No Description Range of Drill Sizes (mm)
No. of Pieces
0621 004 110 RECA HSSCO Cassette 1.0 to 10.0 29
0621 004 113 RECA HSSCO Cassette 1.0 to 13.0 35
Sets come in a robust metal case and contain 2 of each small diameters (1.0mm to 5.0mm) plus a centre punch.
Art. No. Ø mm Length mm Flute mm Pack Qty
0620 20 2.00 50 25 10
0620 25 2.50 57 30 10
0620 30 3.00 61 33 10
0620 32 3.20 65 36 10
0620 35 3.50 70 39 10
0620 40 4.00 75 43 10
0620 42 4.20 75 43 10
0620 45 4.50 80 47 10
0620 50 5.00 86 52 10
0620 55 5.50 93 57 10
0620 60 6.00 93 57 10
0620 65 6.50 101 63 10
0620 68 6.80 109 69 10
0620 70 7.00 109 69 10
0620 80 8.00 117 75 1
0620 90 9.00 125 81 1
0620 100 10.00 133 87 1
0620 105 10.50 133 87 1
0620 110 11.00 142 94 1
0620 120 12.00 151 101 1
0620 130 13.00 151 101 1
Applications - switch boxes, metal studs, electrical applications, lighting fixtures, body repair, truck body repair, trailer frames, ductile pipe, steel fabrications and structural steel.
Speed - Penetrates steel many times faster than standard bi-metal holesaws. Life - On tests, drilling into stainless steel, LDX metal cutters drilled over 350 holes compared to a maximum of 10 holes gained from two alternative holesaws. Usage - LDX metal cutters can be used on standard portable power tools. Run on rotation only, any power tool with a range of 500 to 800rpm can be utilised. System is fully portable with no need for special equipment.
01 0
6 - R
A 0
3/15
Rep
rodu
ctio
n, e
ven
in p
art,
proh
ibite
d. P
rinte
d in
UK.
The ultimate solution to drilling metal. The perfect, portable tool for the professional electrician, plumber, mechanic, fabricator and general contractor. An extremely productive tool that is a cost effective alternative to broaching cutters. For cutting steel plate, iron, aluminium, copper, cast iron, stainless steel, FRP (i.e. Fibreglass) and plastics.
Special Tungsten Carbide Teeth - Excellent wear & heat resistance. Cuts stainless steel & tough alloys. One Piece Construction - No assembly required. Stable accurate drilling. Ejector Spring - Ejects the slug sav ing time. Safety Collar Stop - Prevents over penetration for safer, faster operation.
Cutting Depth 4.75mm 25.00mm
Size (mm) Short Series
Art. No. Long Series
Art. No. 14.0 0619 114 0619 214 16.0 0619 116 18.0 0619 218 19.0 0619 219 20.0 0619 120 0619 220 22.0 0619 122 0619 222 25.0 0619 125 0619 225 28.0 0619 228 30.0 0619 230 32.0 0619 132 0619 232 35.0 0619 235 38.0 0619 238 40.0 0619 240 41.0 0619 241 45.0 0619 245 50.0 0619 250 51.0 0619 251 55.0 0619 255 60.0 0619 260 65.0 0619 265 75.0 0619 275
Replacement Pilot (SHORT) 0619 101
Replacement Pilot (LONG) 0619 201
Replacement Spring (SHORT) 0619 105
Replacement Spring (LONG) 0619 205
Replacement Grub Screw (BOTH)
0619 107
Speed Recommendation
Size Steel (rpm)
Stainless (rpm)
14.0 to 20.0mm
700-1000 300-700
22.0 to 30.0mm
500-800 200-450
32.0 to 40.0mm
300-600 175-315
41.0 to 50.0mm
200-500 120-225
51.0 to 60.0mm
200-400 95-195
61.0 to 75.0mm
150-300 80-150
LDX Metal Cutters
01 06 01 06
Supercut Rotabor cutters are an industry standard range of M2 cutters.
Designed, manufactured and inspected in England by a BSI registered firm.
Approved inspection procedures fulfil the requirements specified by the British Standards EN ISO 9002 certificate.
Supercut Rotabor cutters are used for boring clean, accurate holes through many metals* including mild steel, high tensile steel, brass and aluminium.
Rotabor cutters can be used in most metal working and fabricating industries. Main market sectors include steel erectors, steel building services, welders, fabricators, pressure vessel and pipework contractors.
Unique patented ‘chipbreaker’ form allows faster swarf removal and gives longer tool life.
Full range of cutters from 12mm to 60mm available with all popular sizes normally stocked.
Excellent range of accessories available including pins, countersinks, Morse taper adaptors and both large and small magnetic based drilling machines.
*Different base materials require different speed (RPM) and feed rates.
01 0
7 - J
DS 0
1/14
Rep
rodu
ctio
n, e
ven
in p
art,
proh
ibite
d. P
rinte
d in
UK
M2 Supercut Rotabor Cutters Short Cutters 30mm Length Long Cutters 60mm Length
Drill Depth 25.00mm Drill Depth 50.00mm Art. No. Dia. Art. No. Dia. 0623 112 12 mm 0623 113 13 mm 0623 114 14 mm 0623214 14 mm 0623 115 15 mm 0623215 15 mm 0623 116 16 mm 0623216 16 mm 0623 117 17 mm 0623 118 18 mm 0623218 18 mm 0623 119 19 mm 0623219 19 mm 0623 120 20 mm 0623220 20 mm 0623 121 21 mm 0623221 21 mm 0623 122 22 mm 0623222 22 mm 0623 123 23 mm 0623 124 24 mm 0623224 24 mm 0623 125 25 mm 0623225 25 mm 0623 126 26 mm 0623226 26 mm 0623 127 27 mm 0623227 27 mm 0623 128 28 mm 0623228 28 mm 0623 129 29 mm 0623 130 30 mm 0623230 30 mm 0623 132 32 mm 0623232 32 mm 0623 133 33 mm 0623 134 34 mm 0623234 34 mm 0623 135 35 mm 0623 136 36 mm 0623 138 38 mm 0623 140 40 mm 0623240 40 mm 0623 142 42 mm 0623 145 45 mm 0623 150 50 mm 0623250 50 mm 0623 152 52 mm 0623 156 56 mm 0623 160 60 mm 60 mm
0623 105 - SHORT CUTTER BOLT KIT IN METAL CASE (2X14, 2X18, 2X22MM + PILOT)
Accessories 0623 1 Short Pin 0623 2 Long Pin
0623 12 Short Pin for 12mm Cutter Only 0623 330 Small Counterink 30mm 0623 350 0623 42 No. 2 Morse Taper Adaptor 0623 43 No. 3 Morse Taper Adaptor
0896 412 400 Arecal Biocut Cutting Oil 400ml Aerosol All of the above items are generally available from stock
Cutters from 12mm to 100mm in 1mm increments that are not listed above can be ordered on request.
Large Countersink 50mm
M42 Supercut Rotabor Cutters Short Cutters 30mm Length Art. No. Dia. mm 0623 612 12 0623 614 14 0623 618 18 0623 622 22 0623 630 30
Supercut Rotabor Cutters
01 07 01 07
For extended cutter life use in conjunction with Arecal Biocut drilling, cutting and tapping oil. Art. No. 0896 412 400
01 0
8 - J
DS 0
5/15
Rep
rodu
ctio
n, e
ven
in p
art,
proh
ibite
d. P
rinte
d in
UK
01 08 01 08
High density magnet for maximum adhesion. Dual carrying handles. Reversible handles for use in awkward situations. Corrosive resistant, tangle-free cable from stand to drill unit. “No Volt Release” switch for improved safety handling. 12 months user confidence warranty.
Magnetic Drills
Cutting capacity 12mm to 70mm with cutters and twist drill capacity of 32mm.
Magnetic holding 1500kg. Magnet area 200 x 100mm. Proven Eibenstock 1600 Watt motor. Isolating power relay for improved handling safety. Control panel situated conveniently on the same side as the
traverse handles. Comes with protective carrying case, safety strap, cutting fluid,
safety guard & folding hex key set. 240V available, price on request.
Art. No. 0627 5070
Powerbor PB32 - 110V
Powerbor PB70/2 - 110V
Specifications PB32 PB 70/2 H x W x D 320 (max) x 90 x 240mm 445 (max) x 120 x 330mm Weight 12.5kg 22kgs Motor Input Power 770w 1750watt Magnetic Adhesion 1000kg 1500kg Speed (load) 390rpm 410rpm Speed (no load) 690rpm Cutter Capacity 12-32mm 12-70mm Twist Drill Capacity 18mm with reduced shank 32mm Arbor MT3 Cutter Fitting Type 3/4 Wheldon
Fitted with the reliable and proven HITACHI D13 power unit. Improved high density magnet for maximum adhesion. Control panel situated conveniently on the same side as the
traverse handles. Free protective carry case complete with safety strap, safety
guard and folding hex key set. Comes complete with a 13mm drill chuck and key included. 240v available, price on request.
Art No 0627 5032
01 0
9 - J
DS 0
8/14
Rep
rodu
ctio
n, e
ven
in p
art,
proh
ibite
d. -
Prin
ted
in U
K
HSSCO cobalt countersinks are also available. HSSCO countersinks are better suited for harder metals such as stainless steel.
Cobalt Countersinks
Art. No. Diameter (mm) Shaft (mm) Length (mm) 0692 390 083 8.3 6 50 0692 390 124 12.4 8 56 0692 390 165 16.5 10 60 0692 390 205 20.5 10 63 0692 390 250 25.0 10 67 0692 390 310 31.0 12 71 0692 390 006 Set including 6.3, 8.3, 10.4, 12.4, 16.5 & 20.5mm
Art. No. Diameter (mm) Shaft (mm) Length (mm) 0692 900 063 6.3 5 45 0692 900 083 8.3 6 50 0692 900 104 10.4 6 50 0692 900 124 12.4 8 56 0692 900 165 16.5 10 60 0692 900 205 20.5 10 63 0692 900 250 25.0 10 67 0692 900 310 31.00 12 71 0692 900 900 Set including 6.3, 8.3, 10.4, 12.4, 16.5 & 20.5mm
HSS Countersinks
Evolution Cyclone swarf and chip collector.
Push rod to magnetise, wave over ferrous metal filings which adhere to the cyclone. Withdraw rod to release filings into an appropriate scrap area.
Clean working area with no effort. Excess filings can affect magnet performance on drills!
Article No. 0627 9990
For Magnetic drill (broaching) cutters and accessories please turn to pages 01 06.
01 09 01 09
Countersinks are used in a drilling machine to produce a perfect ‘v’ shape in the base material. This allows a countersunk screw to sit perfectly flush to the surface.
Made from high quality, High Speed Steel they offer excellent precision and longevity.
Ideal for use on metal but also suitable for use on plastics and wood. 90O angle suits most popular countersunk heads on wood and
machine screws.
01 1
0 - J
DS 0
1/14
Rep
rodu
ctio
n, e
ven
in p
art,
proh
ibite
d. -
Prin
ted
in U
K
Cone Drills and Step Drills
Cone Drills
Cone shaped tool for use in drilling machines etc. High Quality HSS so ideal for use in metal but also non-ferrous
metals, plastics and wood. A range of sizes can be drilled with just one tool. The further forward the tool is pushed, the wider the hole produced.
Step Drills
A drill with actual steps giving many different, accurate hole diameters in one tool.
High Quality HSS so ideal for use in metal but also non-ferrous metal, plastics and wood.
For use in hand held and bench drills. Step drill are available in millimetres or specially graduated for
electrical conduct.
Art. No. Drill Range Overall Length Shaft (mm) 0692 811 314 3 - 14mm 58 6 0692 812 820 8 - 20mm 71 8 0692 813 430 4 - 30mm 76 9 0692 814 16 16 - 30mm 89 10 0692 815 26 26 - 40mm 97 12 0692 816 36 36 - 50mm 115 9
Art. No. Size Number Gr. Drill Range Steps No. Inc. (mm) Shaft (mm) 0692 711 412 09 4 - 12mm 9 6 6 0692 712 420 1 4 - 20mm 9 8 8 0692 713 630 2 4 - 30mm 14 9 10 0692 715 936 4 PG 7 - 21 9 12 10
0692 710 Set with 1 each of 4-12, 4-20, 4-30
01 10 01 10
Gr. 09 Gr. 1 Gr. 2 Gr. 4
Combination Drill / Tap TiN
Combination drill and tap saves time when making metric threads.
TIN coating for precision and extended working life. Split point HSS drill means no centre punch is
required. Base material should not be thicker than thread
size (M6=max 6mm base material thickness). Special countersunk for deburring, leaving a clean
thread. Especially designed for use in cordless drill/drivers.
1/4” hex fitting. Suitable for stainless steel sheet, structural steel,
steel, non ferrous metal and plastic.
Art. No. Thread Pitch Drill Size Overall Length Rec. RPM steel
0641 4 M4 0.70mm 3.3mm 39mm 1,200
0641 5 M5 0.80mm 4.2mm 41mm 950
0641 6 M6 1.00mm 5.0mm 44mm 800
0641 8 M8 1.25mm 6.8mm 50mm 600
0641 10 M10 1.50mm 8.5mm 59mm 450
0641 001 6 piece set containing M3, 4, 5, 6, 8 and 10. Sprung bit holder and metal cassette.
01 1
1 - J
DS 0
1/14
Rep
rodu
ctio
n, e
ven
in p
art,
proh
ibite
d. -
Prin
ted
in U
K
01 11 01 11
Tap Wrenches
Art. No. Size Length Fits Sqr. Fit Tap Type
0656 001 310 1 85mm 2.4 - 5.5 M3 - 10 1/8– 3/8 Short
0656 001 512 2 100mm 4.5 - 7.0 M5 - 12 7/32-1/2 Short
0656 002 310 10 250mm 2.4 - 5.5 M3 - 10 1/8 - 3/8 Long
Art. No. Size Length (mm) Sqr. DIN Sqr. ISO For tap (mm) For tap (whit)
0657 2 2 280 3.8 - 7.0 4.0 - 9.0 M4 - 12 3/16-1/2
0657 3 3 375 4.9 - 12.0 4.9 - 12.0 M5 - 20 3/16-3/4
T - Type ratchet tap wrench with forward / reverse operation and central lock option.
Ideally suited for use in confined spaces. Two adjustable jaws and plated finish.
Standard pattern tap wrench for RECA and other brands of taps.
01 12 01 12
01 1
2 - J
DS 0
1/14
Rep
rodu
ctio
n, e
ven
in p
art,
proh
ibite
d. P
rinte
d in
UK.
Full range of metric hand taps to ISO 529. Available as Taper, Second and Plug. Taper is ideal for through holes, and when starting a thread prior
to using a Second or Plug. Second, the most commonly used tap is ideal for through holes. Plug is mainly used to produce thread close to the bottom of the
hole or in a hole that has already been partially threaded. For best results use RECA HSS drills for tapping holes. Drill
diameters are shown below. Tap wrenches and dies also available.
Machine Taps Spiral Point Metric Coarse
Hand Taps ISO 529 HSS
Taper Art. No.
Second Art. No.
Plug Art. No.
Thread Drill Diameter (mm)
0640 1 2 0640 2 2 0640 3 2 M2 1.6
0640 1 3 0640 2 3 0640 3 3 M3 2.5
0640 1 4 0640 2 4 0640 3 4 M4 3.3
0640 1 5 0640 2 5 0640 3 5 M5 4.2
0640 1 6 0640 2 6 0640 3 6 M6 5.0
0640 1 8 0640 2 8 0640 3 8 M8 6.8
0640 1 10 0640 2 10 0640 3 10 M10 8.5
0640 1 12 0640 2 12 0640 3 12 M12 10.2
0640 1 14 0640 2 14 0640 3 14 M14 12.0
0640 1 16 0640 2 16 0640 3 16 M16 14.0
0640 1 20 0640 2 20 0640 3 20 M20 17.5
0640 2 24 M24 21.0
Superior quality HSS for the most demanding tasks in metalworking and fabrication. They are surface treated to ensure improved production rates.
These are mainly recommended for through hole machine tapping. Swarf is angled downwards ahead of the tap. This reduces tap breakage and reversal is made easier.
Other sizes available POA.
Art. No. Size Pitch No of Flute 0640 55 M5 0.80 2 0640 56 M6 1.00 2 0640 58 M8 1.25 3
0640 510 M10 1.50 3
01 13 01 13
01 1
3 - V
Y 01
/16
Repr
oduc
tion,
eve
n in
par
t, pr
ohib
ited.
Prin
ted
in U
K.
RECA Tap & Die Sets
Art. No. Size Content in metal case
0639 000 312 M3 - M12
1 Set Tapping size drill bits
1 Set Hand taps (1st, 2nd, 3rd)
1 Each Die M3, 4, 5, 6, 8, 10 & 12
1 Each Tap wrench No.1 & No.2
1 Each Die stock 20x5, 20x7, 25x9, 30x11, 38x14
1 Each Screwdriver and thread gauge
Art. No. Size Content in metal case
0639 000 320 M3 - M20
1 Set Hand taps (1st, 2nd, 3rd)
1 Each Die M3, 4, 5, 6, 8, 10 , 12, 14, 16, 18 & 20
1 Each Tap wrench No.1 & No.3
1 Each Die stock 20x5, 20x7, 25x9, 30x11, 38x14, 45x18
1 Each Screwdriver and thread gauge