ars.els-cdn.com  · web viewthe cutting tool is attached to the milling head and the workpiece is...

2
Arts et Métiers ParisTech, LaBoMaP, 71250 Cluny, France y D ual-cavity pulsedlaser Double-frame sCM OS cam era Telecentric objective Liquidlightguide withexpander V c V c x z Tool Milling head Experimental imaging setup for strain field measurement during orthogonal cutting tests A 3-axis milling centre (DMG model DMC85V) is used to perform the orthogonal cutting tests in planing configuration. Main features: Gantry- type machine architecture, equipped with 3 linear axes (connected to the milling head) having a maximum feed velocity of 120 000 mm/min. The specially-designed experimental imaging setup is composed of: double-frame sCMOS camera (LaVision model Imager sCMOS), Nd:YAG dual-pulsed laser (Litron model

Upload: phunghuong

Post on 03-Dec-2018

230 views

Category:

Documents


0 download

TRANSCRIPT

Arts et Métiers ParisTech, LaBoMaP, 71250 Cluny, France

y Dual-cavitypulsed laser

Double-frame sCMOS camera

Telecentricobjective

Liquid light guide with expander

VcVc

x

z

Tool

Milling head

Experimental imaging setup for strain field measurement during orthogonal cutting tests

A 3-axis milling centre (DMG model DMC85V) is used to perform the orthogonal cutting tests in planing configuration. Main features: Gantry-type machine architecture, equipped with 3 linear axes (connected to the milling head) having a maximum feed velocity of 120 000 mm/min. The specially-designed experimental imaging setup is composed of: double-frame sCMOS camera (LaVision model Imager sCMOS), Nd:YAG dual-pulsed laser (Litron model NS30-15) and telecentric lens

(Mitutoyo model ML 10x). A Kistler 9119AA2 piezoelectric dynamometer is also used for cutting and thrust force measurements. The cutting tool is attached to the milling head and the workpiece is fixed to the milling table, together with the dynamometer and the experimental imaging setup. In planing configuration, the milling table is static and the milling head moves along the x-axis to generate the tool motion (direction of primary motion or direction of vc).