arrays
TRANSCRIPT
Principles of Programming - NI2005 1
Chapter 8: ArraysIn this chapter, you will learn about
Introduction to ArrayArray declarationArray initializationAssigning values to array elementsReading values from array elementsRelationship with pointers Passing array to function2 Dimensional arraysSimple Searching Simple Sorting
Principles of Programming - NI2005 2
Introduction to ArrayIn C, a group of items of the same type can be set up using Array
An array is a group of consecutive memory locations related by the fact that they all have the same name and the same type.
The compiler must reserve storage (space) for each element/item of a declared array.
The size of an array is static (fixed) throughout program execution.
To refer to a particular location or element in the array, we specify the name of the array (index or subscript) and the position number of the particular element in the array.
Principles of Programming - NI2005 3
Let say we have an array called a.
-10
99
-8
100
27
101976
-2020
1
a[0]
a[1]
a[2]
a[3]
a[4]
a[5]
a[6]
a[7]
a[8]
Name of the array
The position number withinthe square brackets is formallycalled a subscript. A subscriptcan be an integer or an integerexpression. For example if x = 1 and y = 2, then a[x+y]is equal to a[3].
Notice that the positionstarts from 0.
Principles of Programming - NI2005 4
Array Declaration
Array declaration is made by specifying the data type, it’s name and the number of space (size) so that the computer may reserve the appropriate amount of memory.
General syntax:data_type array_name[size];
Examples: int my_array[100];char name[20];double bigval[5*200];int a[27], b[10], c[76];
Principles of Programming - NI2005 5
Array InitializationThere are 2 ways to initialize an array: during compilation and during execution.
During compilation:int arr[ ] = {1, 2, 3, 4, 5}; unsized array
We can define how many elements that we want since the array size is not given.
int arr[3] = {90, 21, 22};We can define only 3 elements since the array size is already given.
int arr[5] = {2,4}Initialize the first two elements to the value of 2 and 4 respectively, while the other elements are initialized to zero.
int arr[5] = {0}Initialize all array elements to zero.
Principles of Programming - NI2005 6
Array Initialization cont…
During execution:Using loop to initialize all elements to zeroint arr[3], index;
for (index = 0; index < 3; index++) arr[index] = 0;
Using loop and asking the user to specify the value for each element.int arr[3], index;
for (index = 0; index < 3; index++){ printf (“arr[%d]:”,index); scanf(“%d”,&arr[index]);}
Principles of Programming - NI2005 7
Assigning value to array elementWe can assign a value to a specific array element by using its index number.Example: let’s say we have an array that represent the number of inhabitant in 5 unit apartments.
int apartment[5]={3,2,6,4,5};The above initialization indicates that there are 3 people living in apartment 0, 2 people living in apartment 1 and so on.Let say that we have a new born in apartment 3, so we need to change the number of inhabitant living in apartment three.
apartment[3] = apartment[3] + 1;Now, we have the following values in our array:
3,2,6,5,5
Principles of Programming - NI2005 8
Reading values from array elements
We can read a value from a specific array element by referring to the index.For example, let’s say we want to know how many people leaving in apartment 3, we could simple do this:
int apartment[5] = {3,2,6,4,5};int no_of_people;no_of_people = apartment[3];printf(“Apartment 3 has %d people”, no_of_people);
The above C code will produce the following output:Apartment 3 has 4 people.
Hint!!! Remember that array index starts at 0
Principles of Programming - NI2005 9
Example 1: finding total inhabitants#include <stdio.h>#define size 5
void main(void){
int apartment[size] = {3,2,6,4,5};int index, total = 0;
for (index = 0; index < size; index++){
total = total + apartment[index];}
printf("There are total of %d inhabitants",total);}
Output:There are total of 20 inhabitants
Principles of Programming - NI2005 10
Example 2: list down number of inhabitants in each apartment
#include <stdio.h>
void main(void){
int apartment[5] = {3,2,6,4,5};int index, total = 0;
printf("%-7s %-15s\n","Apt No", "No of people");
for (index = 0; index < 5; index++){
printf("%4d %10d\n",index, apartment[index]);}
}
Principles of Programming - NI2005 11
Example 2 output
Apt No No of people0 31 22 63 44 5
Principles of Programming - NI2005 12
Relationship with pointers
The name of an array is actually a pointer to the first element in the array.
Therefore, if we have:int test[3] = {9, 10, 11};
printf(“%d”, *test); The output would be: 9
There are a few ways to traverse an array:
int test[3] = {9, 10, 11}, k;for (k = 0; k < 3; k++) printf(“%d\n”, test[k]);
Using indexint test[3] = {9, 10, 11}, k;int *ptr = test;for (k = 0; k < 3; k++, ptr++) printf(“%d\n”, *ptr);
Using pointers
Principles of Programming - NI2005 13
Passing Array to a Function
When we pass an array to a function, we are actually passing the pointer to the first element in the array to the function. Therefore, any changes to the array inside the function will also change the actual array inside the calling function.
When we want to pass an array to a function, we need to know these 3 things.
How to write the function prototype?
How to do function call?
How does the function header would look like?
Principles of Programming - NI2005 14
Passing Array to a FunctionAssume that we have the following array declaration.
flaot marks[10] = {0.0};
Say for example we want to write a function, called get_marks, which will read marks from the user and store the marks inside the array.
Function prototype:/* data type with square bracket */void get_marks(float [ ]); void get_marks(float *); /*treating array as pointer */
Function call:get_marks(marks); /* just pass the array name */
Function header:void get_marks(float marks[ ]) void get_marks(float *marks) /*treating array as pointers */
Principles of Programming - NI2005 15
Example 1: parameter received as an array
#include <stdio.h>#define size 10void get_marks(float [ ]);float calc_average(float [ ]);
void main(void){
float marks[size] = {0.0}; /*initializing the arrayget_marks(marks); /* function call */printf(“Average for marks given is %f”, calc_average(marks));
}
Principles of Programming - NI2005 16
Example 1: parameter received as an arrayvoid get_marks(float marks[ ]){
int i;
for (i = 0; i < size; i++){
printf("Marks student %d:",i + 1);scanf("%f",&marks[i]);
}} float calc_average(float marks[ ])
{float total = 0.0;int i;
for (i = 0; i < size; i++){
total = total + marks[i];}return (total / size);
}
Principles of Programming - NI2005 17
Example 2: parameter received as pointers
A function could also receive/treat array parameter as pointer.
#include <stdio.h>
#define size 10
void get_marks(float *);
float calc_average(float *);
void main(void)
{
float marks[size] = {0.0};
get_marks(marks);
printf("Average for marks given is %f\n", calc_average(marks));
}
Observe the function prototypes
Principles of Programming - NI2005 18
Example 2: parameter received as pointersvoid get_marks(float *marks){
int i;
for (i = 0; i < size; i++, marks++){
printf("Marks student %d: ", i + 1);
scanf("%f", marks);}
}float calculate_average(float *marks){
float total = 0.0;int i;
for (i = 0; i < size; i++, marks++){
total = total + *marks;}
return (total / size);}
Manipulating the memory address
Pointer variable
Principles of Programming - NI2005 19
2-Dimensional ArrayIt is possible to create an array which has more than one dimension.For example:
2D array: int array[4][2];3D array: int array[4][2][10];
Graphical representation of a 2D array:int myarray[4][2] = {1, 2, 3, 4, 5, 6, 7, 8};
1 2
3 4
5 67 8
This array has 4 rows and 2 columns.
Fourrows
Col 1 Col2
Principles of Programming - NI2005 20
2-Dimensional Array cont…
Variable initialization can also be done this way: int myarray[4][2] = {{1, 2}, {3, 4}, {5, 6}, {7, 8}};
This method is less confusing since we can see the rows and columns division more clearly.
To initialize a 2D array during execution, we need to use a nested for loop:
for (row = 0; row < 4; row++) {
for (column = 0; column < 2; column++) myarray[row][column] = 0; }
Although it is possible to create a multi-dimensional array, arrays above 2-dimensions are rarely used.
Principles of Programming - NI2005 21
Passing a 2D array to a function
When a 2D (or higher dimensional) array is passed to a function, the size of the second (or subsequent) subscript needs to be specified.
For example, if we have:int twoD[4][5];
Then the function header which would take twoD as an argument should be declared like this:
void Process2D(int twoD[ ][5])
An array is stored consecutively in memory regardless of the number of dimensions. Therefore, specifying the subscripts in the function parameter will help the compiler to know the boundary of the different dimensions.
Principles of Programming - NI2005 22
Simple SearchingSearching is the process of determining whether an array contains a value that matches a certain key value/search key.The process of finding a particular element of an array is called searching.Same as in sort, there are more than one algorithms that can be used to do a search.The most commonly used searching techniques are linear search and binary search.Here, we will discuss to do searching by using linear search on an array.
Principles of Programming - NI2005 23
Simple Searching cont…Search key is a data element of the same type as the list elements.
If search key = list element value, the search is said to be successful
Otherwise, it is unsuccessful.
Linear search is a simple searching algorithm where:
data are stored in an array
a search key is compared with each elements in the array starting from the first element
Principles of Programming - NI2005 24
Examplevoid main(void) { int list[ ] = {34, 53, 21, 23, 4}; int i, search_key, found = 0;
printf(“Enter the number that you want to find: ”); scanf(“%d”, &search_key);
for (i = 0; i < 5; i++) {
if (list[i] = = search_key) {
found = 1; printf(“The number %d is found at index %d\n”, search_key,
i); }
}if (found = = 0)
printf(“The number %d cannot be found in the list\n”,search_key);}
Sample Output:Enter the number that you want to find: 53The number 53 is found at index 1Press any key to continue
Principles of Programming - NI2005 25
SortingSorting is the process of placing data into a particular order such as ascending or descending.The following example shows the C code for sorting unsorted list to a list sorted in ascending order.Explanation for the working program and the concept behind it will be done during lecture hour… (so please attend the class!!!!).
Principles of Programming - NI2005 26
Example using Simple Sort#include <stdio.h>#define size 10void sort(int [ ]);
void main(void){
int index, list[size] = {0};
for (index = 0; index < size; index++) /*array initialisation by user */{
printf("list[%d]:",index);scanf("%d",&list[index]);
}
sort(list); /* calling function to sort the array
printf("\nList sorted in ascending order:\n\n");
for (index = 0; index < size; index++){
printf("%d\t",list[index]); /* printing the array element */}
}
Principles of Programming - NI2005 27
Sorting example cont…void sort(int list[ ]){
int pivot, checker, temp;
for (pivot = 0; pivot < (size - 1); pivot++){
for (checker = (pivot + 1); checker < size; checker++){
if (list[checker] < list[pivot]) {
/* swap the elements */temp = list[pivot] ;list[pivot] = list[checker];list[checker] = temp;
}}
}}
Principles of Programming - NI2005 28
SummaryIn this chapter, we have looked at:
Array declaration and initialization
Reading and writing from/to array elements
Passing array to function
2 dimensional array
Simple search
Array sorting