armor-o-rings™ / ptfe-fep encapsulated o-rings€¦ · armor-o-rings™ / ptfe-fep encapsulated...

Armor-O-Rings™ / PTFE-FEP Encapsulated O-Rings

Armor-O-Rings™ are produced using a thin PTFEshielded tubing fully encasing an elastomeric rubber-like core. The outer jacket protects the resilient corefrom the fluids which the O-Ring contacts. This uniquecombination enables the Armor-O-Ring to give maxi-mum protection in even the harshest environment.PTFE is an ideal sealing material, however, it is notresilient by itself. The elastomeric core material,either silicone or Viton®, gives the outer PTFE shield

the memory required to effect a proper seal. It will provide anexcellent seal in high temperatures, aggressive chemical expo-sure and still remain elastic.

The Armor-O-Ring™ style EOV and EOS have a PTFE-FEP jack-et with a minimum thickness of .008”. This casing is far supe-rior to a simple coating of PTFE. Illustration (A) below showthe typical wall thickness relative to the cross section of the

O-Ring. The PTFE shield is virtually chemically inert and resists most chemicals, exceptmolten metals, fluorine at higher temperatures, and certain complex halogenatedcompounds.

Type Armor-O-Ring™ EOVConstruction: Core made using Viton® fluorolastomer corewith PTFE-FEP encapsulation.

Uses: Chemically resistant to most fluids and gases, exceptmolten alkali metals, fluorine at elevated temperatures andsome complex halogens. Especially suited for oils and solvents.

Temperature: -40° to 205°C / -40° to 401°F

Type Armor O-Ring™ EOSConstruction: Core made using silicone rubber core withPTFE-FEP encapsulation.

Uses: Excellent for cryogenic applications, broad chemicalapplication and most any application requiring a resilient,chemical resistant seal.

Temperature: -73° to 205°C / -99° to 401°F

The Seal Man’s O-Ring Handbook™

112-G West Burke Street Stockbridge, GA 30281Phone: (800) 659-5050 Fax: (888) 353-7325 Web: www.epm.com 104

WidthMM Inches1.601.782.002.402.502.623.003.534.004.505.005.335.706.006.306.997.508.009.009.5010.0011.0012.00

0.0630.0700.0780.0950.0980.1030.1180.1390.1580.1770.1970.2100.2240.2360.2480.2750.2950.3150.3540.3740.3940.4330.472

O-Ring WidthInch

Wall ThicknessInch

.070

.103

.139

.210

.275

.008

.010

.012

.015

.020

Minimum I.D.MM Inches7.647.647.649.199.199.1912.0013.1018.0023.1023.1023.1050.0050.0050.0050.0050.0050.00101.60127.00127.00127.00152.40

0.3010.3010.3010.3620.3620.3620.4720.5150.7080.9110.9110.9111.9681.9681.9681.9681.9681.9684.0005.0005.0005.0006.000

Illustration (A)


Where can Armor-O-Rings™ be used?

• Flanges - Excellent for grooved faceflanges.

• Valve Assemblies - Superiorperformance tostandard O-Ringscontacting steam,air, gases andtoxic, hazardousmaterials.

• Tank Valves - Broad range of chemical coverage reducing maintenance costs.

• Mechanical Seals - Internal O-Rings within the shaft seal, water topetrochemicals.

• Pipe Fittings - Versatile as an option to a flat gaskets - requires a groove.

• Hose Coupling - Special shapes for quick disconnect couplings.

Glassware - Low compression for fragile flanges and fittings.

• Food Equipment - Suitable for food, beverage and pharmacuetical equipment.





SealMaterial

EOSArmor-O-Rings™

Silicone Core

Also referred to as:Teflon® Encapsulated

Silicone O-Rings,PTFE EncapsulatedSilicone O-Rings,

PTFE-FEP EncapsulatedSilicone O-Rings

Orangewith

opaqueshell

-40 to 401°F

-40 to 205°C

Color TemperatureLimits

N/A 70(core)

Use in: To improve O-Ringperformance in difficultapplications where siliconeO-Rings alone fail.

Description: Armor-O-Rings™EOS are produced using a thinPTFE shielded tubing fullyencasing a silicone rubber core.The outer jacket protects theresilient silicone core from thefluids the O-Ring contacts.

Characteristics: Semi-rigidPTFE-FEP tubing fullyencapsulating the silicone corematerial.

Material: PTFE-FEP jacket witha minimum thickness of .008”over a silicone core.

HardnessMachined

O-RingMoldedO-Ring

Information

Armor-O-Rings™ Material Selection Guide

SealMaterial

EOVArmor-O-Rings™

Viton® Core

Also referred to as:Teflon® EncapsulatedViton® O-Rings, PTFEEncapsulated Viton®O-Rings, PTFE-FEP

Encapsulated Viton®O-Rings

Blackwith

opaqueshell

-99 to 401°F

-73 to 205°C

Color TemperatureLimits

N/A 75(core)

Use in: To improve O-Ringperformance in difficultapplications where Viton®alone fails.

Description: Armor-O-Rings™EOV are produced using a thinPTFE shielded tubing fullyencasing a Viton® elastomericcore. The outer jacket protectsthe resilient Viton® core fromthe fluids which the O-Ringcontacts.

Characteristics: Semi-rigidPTFE-FEP tubing fully encapsu-lating the Viton® core material.Endless. No joints.

Material: PTFE-FEP jacket witha minimum thickness of .008”over a Viton® core.

HardnessMachined

O-RingMoldedO-Ring

Information

See page 37 for ahardness scale.

See page 37 for ahardness scale.


I N C HSIZING CHART

Click here to see pages 114-124 for an inch sizing chart.



OD ID

W

Click here to see pages 114-124 for an inch sizing chart.


METRICSIZING CHART

Click here to see pages 125-158 for a metric sizing chart.



OD ID

W

Click here to see pages 125-158 for a metric sizing chart.



Groove Dimensions

InchO-Ring

W

------------

.070” (1/16”)---

MetricO-Ring

W

1.001.021.101.121.151.201.251.271.301.421.451.601.781.801.902.00

Dynamic and Static Face Type

GrooveDepth

GD(a)Tol. + 0.1

GrooveWidth

GW(c)Tol. + 0.2

Radius

WithoutBack-up

Ring

WithBack-up

Ring

Groove WidthGrooveDepth

GD + 0.06Tol. + 0.06

GW + 0.2

Tol. + 0.2

GW(a)1 BU

Tol. + 0.2

GW(b)2 BU

Tol. + 0.20.650.650.750.750.750.800.850.850.900.950.951.101.201.201.401.40

1.401.401.501.501.501.701.801.801.801.901.902.202.402.402.502.50

0.20.20.20.20.20.20.20.20.20.20.20.30.40.40.50.5

0.20.20.20.20.20.20.20.20.20.20.20.20.20.20.20.2

0.800.800.900.900.900.951.001.001.051.151.151.301.451.451.651.65

1.401.401.501.501.501.701.801.801.801.901.902.202.402.402.502.50

------------

3.803.803.903.90

------------

5.205.205.305.30

Dynamic and StaticSurface finish:rod/cylinder bore, Rt = 1-4µbase of groove, static Rt = 6-16µbase of groove, dynamic Rt = 6-10µ

Face TypeSurface finish:seal contact area, Rt = 6-16µbase of groove, Rt = 6-16µpulsating pressure, Rt = 6-16µ

GW(b)

GW

GD

GW(a)

GD(a)

GW(c)

r

GW

0°-5°Break CornersAprrox..005 RAD

GD

1-4µ

1-4µ

Groove Detail

OD ID

W

RodDia.

BoreDia.

Note: 1µ ~ 4√¯̄¯~ 4RMS ~ 4 micro inches~ ~ ~

Dyn

am

ic

Sta

tic

- Face

-



Groove Dimensions(continued)

InchO-Ring

W

---

.103” (3/32”)-----

.139” (1/8”)----

.210” (3/16”)-

MetricO-Ring

W

2.202.402.502.622.652.703.003.103.503.533.554.004.505.005.335.50


GrooveDepth

GD(a)Tol. + 0.1

GrooveWidth

GW(c)Tol. + 0.2

Radius

WithoutBack-up

Ring

WithBack-up

Ring


GD + 0.06Tol. + 0.06

GW + 0.2

Tol. + 0.2

GW(a)1 BU

Tol. + 0.2

GW(b)2 BU

Tol. + 0.21.551.701.801.901.901.952.202.302.702.702.703.103.403.904.304.40

2.903.203.403.603.603.703.904.004.804.804.805.406.006.707.107.30

0.50.50.50.60.60.60.80.81.01.01.01.01.01.01.21.2

0.30.30.30.30.30.30.30.40.40.40.40.40.40.40.60.6

1.852.002.102.252.252.302.502.703.103.103.103.504.004.304.704.80

2.903.203.403.603.603.703.904.004.804.804.805.406.006.707.107.30

4.304.604.805.005.005.105.305.406.206.206.207.107.708.408.809.00

5.706.006.206.406.406.506.706.807.607.607.608.809.4010.1010.5010.70



GW(b)

GW

GD

GW(a)

GD(a)

GW(c)

r

GW


GD

1-4µ

1-4µ

Groove Detail

OD ID

W

RodDia.

BoreDia.


Dyn

am

ic

Sta

tic

- Face

-



Groove Dimensions(continued)

InchO-Ring

W

--

.275” (1/4”)-------------

MetricO-Ring

W

5.706.006.997.007.207.508.008.409.009.5010.0011.0012.0014.0015.0016.00


GrooveDepth

GD(a)Tol. + 0.1

GrooveWidth

GW(c)Tol. + 0.2

Radius

WithoutBack-up

Ring

WithBack-up

Ring


GD + 0.06Tol. + 0.06

GW + 0.2

Tol. + 0.2

GW(a)1 BU

Tol. + 0.2

GW(b)2 BU

Tol. + 0.24.604.805.805.805.906.206.606.907.407.808.309.1010.3011.6012.5013.50

7.708.209.509.509.8010.4011.0011.7012.5013.3013.5015.5016.8019.0020.0021.50

1.21.21.51.51.51.51.52.02.02.02.03.03.03.03.03.0

0.60.60.60.60.60.60.60.60.60.60.60.60.60.60.60.6

5.005.306.106.106.206.507.007.507.808.308.709.6010.5012.2013.2014.00

7.708.209.509.509.8014.4011.0011.7012.5013.3013.5015.5016.8019.0020.0021.50

9.409.9012.0012.0012.3012.9013.5014.2015.0015.8016.0018.0019.3021.5022.5024.00

11.1011.6014.5014.5014.8015.4016.0016.7017.5018.3018.5020.5021.8024.0025.0026.50



GW(b)

GW

GD

GW(a)

GD(a)

GW(c)

r

GW


GD

1-4µ

1-4µ

Groove Detail

OD ID

W

RodDia.

BoreDia.


Dyn

am

ic

Sta

tic

- Face

-

O-Ring Material Rankings byMaximum Recommended Gap Clearance in InchesBased on O-Ring Durometer and Fluid Pressure (see page 37)



Table Legend- Shore A Durometer Scale -

Note: 1 Bar ≈ 14.5 PSI

O-Ring Material Rankings byMaximum Recommended Gap Clearance in Metric (mm)Based on O-Ring Durometer and Fluid Pressure (see page 37)



Note: 1 Bar ≈ 14.5 PSI

Table Legend- Shore A Durometer Scale -



O-Ring Sizes

O-Ring seals have been standardized underthe basic industrial standard dimensions ofAS568, Aerospace Standard published by theSociety of Automotive Engineers, and amultitude of military standards; AN6227 andMS28775 for general use; M25988, M83248,MS9020, MS9355, and MS29512 for straight-thread tube fittings; and MS28900 forelectrical connectors.

Available SizesAn inch sizing chart is provided below.See pages 125-158 for a full range of metric sizes.

I N C HSIZING CHART

AS568A Nominal Inch Size

I.D.

1/323/641/165/643/321/85/323/167/321/45/163/87/161/29/165/8

11/163/4

13/167/8

-001-002-003-004-005-006-007-008-009-010-011-012-013-014-015-016-017-018-019-020

3/329/643/1613/647/321/49/325/1611/323/87/161/29/165/8

11/163/4

13/167/8

15/161

1/323/641/161/161/161/161/161/161/161/161/161/161/161/161/161/161/161/161/161/16

DashNo.

O.D. I.D.

.029±.004

.042±.004

.056±.004

.070±.005

.101±.005

.114±.005

.145±.005

.176±.005

.208±.005

.239±.005

.301±.005

.364±.005

.426±.005

.489±.005

.551±.007

.614±.009

.676±.009

.739±.009

.801±.009

.864±.009

.040±.003

.050±.003

.060±.003

.070±.003

.070±.003

.070±.003

.070±.003

.070±.003

.070±.003

.070±.003

.070±.003

.070±.003

.070±.003

.070±.003

.070±.003

.070±.003

.070±.003

.070±.003

.070±.003

.070±.003

Width I.D. Width

0.74±0.101.07±0.101.42±0.101.78±0.132.57±0.132.90±0.133.68±0.134.47±0.135.28±0.136.07±0.137.65±0.139.25±0.1310.82±0.1312.42±0.1314.00±0.1815.60±0.2317.17±0.2318.77±0.2320.35±0.2321.95±0.23

1.02±0.081.27±0.081.52±0.081.78±0.081.78±0.081.78±0.081.78±0.081.78±0.081.78±0.081.78±0.081.78±0.081.78±0.081.78±0.081.78±0.081.78±0.081.78±0.081.78±0.081.78±0.081.78±0.081.78±0.08

Width

Actual O-Ring Size (in) Actual O-Ring Size (mm)

For Groove Dimensionssee pages 109-113.

OD ID

W

*All inch sizes are in stock and readyto ship in NBR and VIT materials.



O-Ring Sizes - *All inch sizes are in stock and readyto ship in NBR and VIT materials..

I N C HSIZING CHART (continued)


OD ID

W

Actual O-Ring Size (in) Actual O-Ring Size (mm)AS568A Nominal Inch Size

I.D.

15/161

1-1/161-1/81-3/161-1/41-5/161-3/81-1/21-5/81-3/41-7/8

22-1/82-1/42-3/82-1/22-5/82-3/42-7/8

33-1/43-1/23-3/4

44-1/44-1/24-3/4

55-1/41/163/321/85/323/167/32

-021-022-023-024-025-026-027-028-029-030-031-032-033-034-035-036-037-038-039-040-041-042-043-044-045-046-047-048-049-050-102-103-104-105-106-107

1-1/161-1/81-3/161-1/41-5/161-3/81-7/161-1/21-5/81-3/41-7/8

22-1/82-1/42-3/82-1/22-5/82-3/42-7/8

33-1/83-3/83-5/83-7/84-1/84-3/84-5/84-7/85-1/85-3/81/49/325/1611/323/8

13/32

1/161/161/161/161/161/323/641/161/161/161/161/161/161/161/161/161/161/161/161/161/161/161/161/161/161/161/161/161/161/163/323/323/323/323/323/32

DashNo.

O.D. I.D.

.926±.009

.989±.0101.051±.0101.114±.0101.176±.0111.239±.0111.301±.0111.364±.0131.489±.0131.614±.0131.739±.0151.864±.0151.989±.0182.114±.0182.239±.0182.364±.0182.489±.0182.614±.0202.739±.0202.864±.0202.989±.0243.239±.0243.489±.0243.739±.0273.989±.0274.239±.0304.489±.0304.739±.0304.989±.0375.239±.037.049±.005.081±.005.112±.005.143±.005.174±.005.206±.005

.070±.003

.070±.003

.070±.003

.070±.003

.070±.003

.070±.003

.070±.003

.070±.003

.070±.003

.070±.003

.070±.003

.070±.003

.070±.003

.070±.003

.070±.003

.070±.003

.070±.003

.070±.003

.070±.003

.070±.003

.070±.003

.070±.003

.070±.003

.070±.003

.070±.003

.070±.003

.070±.003

.070±.003

.070±.003

.070±.003

.103±.003

.103±.003

.103±.003

.103±.003

.103±.003

.103±.003

Width I.D. Width

23.52±0.2325.12±0.2526.70±0.2528.30±0.2529.87±0.2831.47±0.2833.05±0.2834.65±0.3337.82±0.3341.00±0.3344.17±0.3847.35±0.3850.52±0.4653.70±0.4656.87±0.4660.05±0.4663.22±0.4666.40±0.5169.57±0.5172.75±0.5175.92±0.6182.27±0.6188.62±0.6194.97±0.69101.32±0.69107.67±0.76114.02±0.76120.37±0.76126.72±0.94133.07±0.941.24±0.132.06±0.132.84±0.133.63±0.134.42±0.135.23±0.13

1.78±0.081.78±0.081.78±0.081.78±0.081.78±0.081.78±0.081.78±0.081.78±0.081.78±0.081.78±0.081.78±0.081.78±0.081.78±0.081.78±0.081.78±0.081.78±0.081.78±0.081.78±0.081.78±0.081.78±0.081.78±0.081.78±0.081.78±0.081.78±0.081.78±0.081.78±0.081.78±0.081.78±0.081.78±0.081.78±0.082.62±0.082.62±0.082.62±0.082.62±0.082.62±0.082.62±0.08

Width


112-G West Burke Street Stockbridge, GA 30281Phone: (800) 659-5050 Fax: (888) 353-7325 Web: www.epm.com




OD ID

W


116


I.D.

1/45/163/87/161/29/165/8

11/163/4

13/167/8

15/161

1-1/161-1/81-3/161-1/41-5/161-3/81-7/161-1/121-9/161-5/8

1-11/161-3/4

1-13/161-7/8

1-15/162

2-1/162-1/82-3/162-1/42-5/162-3/82-7/16

-108-109-110-111-112-113-114-115-116-117-118-119-120-121-122-123-124-125-126-127-128-129-130-131-132-133-134-135-136-137-138-139-140-141-142-143

7/161/29/165/8

11/163/4

131/167/8

15/161

1-1/161-1/81-3/161-1/41-5/161-3/81-7/161-1/21-9/161-5/8

1-11/161-3/4

1-13/161-7/8

1-15/162

2-1/162-1/82-3/162-1/42-5/162-3/82-7/162-1/22-9/162-5/8

3/323/323/323/323/323/323/323/323/323/323/323/323/323/323/323/323/323/323/323/323/323/323/323/323/323/323/323/323/323/323/323/323/323/323/323/32

DashNo.

O.D. I.D.

.237±.005

.299±.005

.362±.005

.424±.005

.487±.005

.549±.007

.612±.009

.674±.009

.737±.009

.799±.010

.862±.010

.924±.010

.987±.0101.049±.0101.112±.0101.174±.0121.237±.0121.299±.0121.362±.0121.424±.0121.487±.0121.549±.0151.612±.0151.674±.0151.737±.0151.799±.0151.862±.0151.925±.0171.987±.0172.050±.0172.112±.0172.175±.0172.237±.0172.300±.0202.362±.0202.425±.020

.103±.003

.103±.003

.103±.003

.103±.003

.103±.003

.103±.003

.103±.003

.103±.003

.103±.003

.103±.003

.103±.003

.103±.003

.103±.003

.103±.003

.103±.003

.103±.003

.103±.003

.103±.003

.103±.003

.103±.003

.103±.003

.103±.003

.103±.003

.103±.003

.103±.003

.103±.003

.103±.003

.103±.003

.103±.003

.103±.003

.103±.003

.103±.003

.103±.003

.103±.003

.103±.003

.103±.003

Width I.D. Width

6.02±0.137.59±0.139.19±0.1310.77±0.1312.37±0.1313.94±0.1815.54±0.2317.12±0.2318.72±0.2320.30±0.2521.89±0.2523.47±0.2525.07±0.2526.64±0.2528.24±0.2529.82±0.3031.42±0.3032.99±0.3034.59±0.3036.17±0.3037.77±0.3039.34±0.3840.94±0.3842.52±0.3844.12±0.3845.69±0.3847.30±0.3848.90±0.4350.47±0.4352.07±0.4353.64±0.4355.25±0.4356.82±0.4358.42±0.5159.99±0.5161.60±0.51

2.62±0.082.62±0.082.62±0.082.62±0.082.62±0.082.62±0.082.62±0.082.62±0.082.62±0.082.62±0.082.62±0.082.62±0.082.62±0.082.62±0.082.62±0.082.62±0.082.62±0.082.62±0.082.62±0.082.62±0.082.62±0.082.62±0.082.62±0.082.62±0.082.62±0.082.62±0.082.62±0.082.62±0.082.62±0.082.62±0.082.62±0.082.62±0.082.62±0.082.62±0.082.62±0.082.62±0.08

Width






OD ID

W


117


I.D.

2-1/22-9/162-5/8

2-11/162-3/4

2-13/162-7/8

33-1/43-1/23-3/4

44-1/44-1/24-3/4

55-1/45-1/25-3/4

66-1/46-1/26-3/4

77-1/47-1/27-3/4

88-1/48-1/28-3/4

99-1/49-1/29-3/43/16

-144-145-146-147-148-149-150-151-152-153-154-155-156-157-158-159-160-161-162-163-164-165-166-167-168-169-170-171-172-173-174-175-176-177-178-201

2-11/162-3/4

2-13/162-7/8

2-15/163

3-1/163-3/163-7/163-11/163-15/164-3/164-7/164-11/164-15/165-3/165-7/165-11/165-15/166-3/166-7/166-11/166-15/167-3/167-7/167-11/167-15/168-3/168-7/168-11/168-15/169-3/169-7/169-11/169-15/167-1/16

3/323/323/323/323/323/323/323/323/323/323/323/323/323/323/323/323/323/323/323/323/323/323/323/323/323/323/323/323/323/323/323/323/323/323/321/8

DashNo.

O.D. I.D.

2.487±.0202.550±.0202.612±.0202.675±.0222.737±.0222.800±.0222.862±.0222.987±.0243.237±.0243.487±.0243.737±.0283.987±.0284.237±.0304.487±.0304.737±.0304.987±.0355.237±.0355.487±.0355.737±.0355.987±.0356.237±.0406.487±.0406.737±.0406.987±.0407.237±.0457.487±.0457.737±.0457.987±.0458.237±.0508.487±.0508.737±.0508.987±.0509.237±.0559.487±.0559.737±.055.171±.005

.103±.003

.103±.003

.103±.003

.103±.003

.103±.003

.103±.003

.103±.003

.103±.003

.103±.003

.103±.003

.103±.003

.103±.003

.103±.003

.103±.003

.103±.003

.103±.003

.103±.003

.103±.003

.103±.003

.103±.003

.103±.003

.103±.003

.103±.003

.103±.003

.103±.003

.103±.003

.103±.003

.103±.003

.103±.003

.103±.003

.103±.003

.103±.003

.103±.003

.103±.003

.103±.003

.139±.004

Width I.D. Width

63.17±0.5164.77±0.5166.34±0.5167.95±0.5669.52±0.5671.12±0.5672.69±0.5675.87±0.6182.22±0.6188.57±0.6194.92±0.71101.27±0.71107.62±0.76113.97±0.76120.32±0.76126.67±0.89133.02±0.89139.37±0.89145.72±0.89152.07±0.89158.42±1.02164.77±1.02171.12±1.02177.47±1.02183.82±1.14190.17±1.14196.52±1.14202.87±1.14209.22±1.27215.57±1.27221.92±1.27228.27±1.27234.62±1.40240.97±1.40247.32±1.404.34±0.13

2.62±0.082.62±0.082.62±0.082.62±0.082.62±0.082.62±0.082.62±0.082.62±0.082.62±0.082.62±0.082.62±0.082.62±0.082.62±0.082.62±0.082.62±0.082.62±0.082.62±0.082.62±0.082.62±0.082.62±0.082.62±0.082.62±0.082.62±0.082.62±0.082.62±0.082.62±0.082.62±0.082.62±0.082.62±0.082.62±0.082.62±0.082.62±0.082.62±0.082.62±0.082.62±0.083.53±0.10

Width






OD ID

W


118


I.D.

1/45/163//87/161/29/165/8

11/163/4

13/167/8

15/161

1-1/161-1/81-3/161-1/41-5/161-3/81-7/161-1/21-5/81-3/41-7/8

22-1/162-1/42-3/82-1/22-5/82-3/42-7/8

33-1/83-1/43-3/8

-202-203-204-205-206-207-208-209-210-211-212-213-214-215-216-217-218-219-220-221-222-223-224-225-226-227-228-229-230-231-232-233-234-235-236-237

1/29/165/8

11/163/4

13/167/8

15/161

1-1/161-1/81-3/161-1/41-5/161-3/81-7/161-1/21-9/161-5/8

1-11/161-3/41-7/8

22-1/82-1/42-3/82-1/22-5/82-3/42-7/8

33-1/83-1/43-3/83-1/23-5/8

1/81/81/81/81/81/81/81/81/81/81/81/81/81/81/81/81/81/81/81/81/81/81/81/81/81/81/81/81/81/81/81/81/81/81/81/8

DashNo.

O.D. I.D.

.234±.005

.296±.005

.359±.005

.421±.005

.484±.005

.546±.007

.609±.009

.671±.009

.734±.010

.796±.010

.859±.010

.921±.010

.984±.0101.046±.0101.109±.0121.171±.0121.234±.0121.296±.0121.359±.0121.421±.0121.484±.0151.609±.0151.734±.0151.859±.0181.984±.0182.109±.0182.234±.0202.359±.0202.484±.0202.609±.0202.734±.0242.859±.0242.984±.0243.109±.0243.234±.0243.359±.024

.139±.004

.139±.004

.139±.004

.139±.004

.139±.004

.139±.004

.139±.004

.139±.004

.139±.004

.139±.004

.139±.004

.139±.004

.139±.004

.139±.004

.139±.004

.139±.004

.139±.004

.139±.004

.139±.004

.139±.004

.139±.004

.139±.004

.139±.004

.139±.004

.139±.004

.139±.004

.139±.004

.139±.004

.139±.004

.139±.004

.139±.004

.139±.004

.139±.004

.139±.004

.139±.004

.139±.004

Width I.D. Width

5.94±0.137.52±0.139.12±0.1310.69±0.1312.29±0.1313.87±0.1715.47±0.2317.04±0.2318.64±0.2520.22±0.2521.82±0.2523.39±0.2525.00±0.2526.57±0.2528.17±0.3029.74±0.3031.34±0.3032.92±0.3034.52±0.3036.09±0.3037.69±0.3840.87±0.3844.04±0.3847.22±0.4650.39±0.4653.57±0.4656.74±0.5059.92±0.5063.09±0.5066.27±0.5069.44±0.6172.62±0.6175.79±0.6178.97±0.6182.14±0.6185.32±0.61

3.53±0.103.53±0.103.53±0.103.53±0.103.53±0.103.53±0.103.53±0.103.53±0.103.53±0.103.53±0.103.53±0.103.53±0.103.53±0.103.53±0.103.53±0.103.53±0.103.53±0.103.53±0.103.53±0.103.53±0.103.53±0.103.53±0.103.53±0.103.53±0.103.53±0.103.53±0.103.53±0.103.53±0.103.53±0.103.53±0.103.53±0.103.53±0.103.53±0.103.53±0.103.53±0.103.53±0.10

Width






OD ID

W


119


I.D.

3-1/23-5/83-3/43-7/8

44-1/84-1/44-3/84-1/24-5/84-3/44-7/8

55-1/85-1/45-3/85-1/25-5/85-3/45-7/8

66-1/46-1/26-3/4

77-1/47-1/27-3/4

88-1/48-1/28-3/4

99-1/49-1/29-3/4

-238-239-240-241-242-243-244-245-246-247-248-249-250-251-252-253-254-255-256-257-258-259-260-261-262-263-264-265-266-267-268-269-270-271-272-273

3-3/43-7/8

44-1/84-1/44-3/84-1/24-5/84-3/44-7/8

55-1/85-1/45-3/85-1/25-5/85-3/45-7/8

66-1/86-1/46-1/26-3/4

77-1/47-1/27-3/4

88-1/48-1/28-3/4

99-1/49-1/29-3/4

10

1/81/81/81/81/81/81/81/81/81/81/81/81/81/81/81/81/81/81/81/81/81/81/81/81/81/81/81/81/81/81/81/81/81/81/81/8

DashNo.

O.D. I.D.

3.484±.0243.609±.0283.734±.0283.859±.0283.984±.0284.109±.0284.234±.0304.359±.0304.484±.0304.609±.0304.734±.0304.859±.0354.984±.0355.109±.0355.234±.0355.359±.0355.484±.0355.609±.0355.734±.0355.859±.0355.984±.0356.234±.0406.484±.0406.734±.0406.984±.0407.234±.0457.484±.0457.734±.0457.984±.0458.234±.0508.484±.0508.734±.0508.984±.0509.234±.0559.484±.0559.734±.055

.139±.004

.139±.004

.139±.004

.139±.004

.139±.004

.139±.004

.139±.004

.139±.004

.139±.004

.139±.004

.139±.004

.139±.004

.139±.004

.139±.004

.139±.004

.139±.004

.139±.004

.139±.004

.139±.004

.139±.004

.139±.004

.139±.004

.139±.004

.139±.004

.139±.004

.139±.004

.139±.004

.139±.004

.139±.004

.139±.004

.139±.004

.139±.004

.139±.004

.139±.004

.139±.004

.139±.004

Width I.D. Width

88.49±0.6191.67±0.7194.84±0.7198.02±0.71101.19±0.71104.37±0.71107.54±0.76110.72±0.76113.89±0.76117.07±0.76120.24±0.76123.42±0.89126.59±0.89129.77±0.89132.94±0.89136.12±0.89139.29±0.89142.47±0.89145.65±0.89148.82±0.89151.99±0.89158.34±1.02164.69±1.02171.04±1.02177.39±1.02183.74±1.14190.09±1.14196.44±1.14202.79±1.14209.14±1.27215.49±1.27221.84±1.27228.19±1.27234.54±1.40240.89±1.40247.24±1.40

3.53±0.103.53±0.103.53±0.103.53±0.103.53±0.103.53±0.103.53±0.103.53±0.103.53±0.103.53±0.103.53±0.103.53±0.103.53±0.103.53±0.103.53±0.103.53±0.103.53±0.103.53±0.103.53±0.103.53±0.103.53±0.103.53±0.103.53±0.103.53±0.103.53±0.103.53±0.103.53±0.103.53±0.103.53±0.103.53±0.103.53±0.103.53±0.103.53±0.103.53±0.103.53±0.103.53±0.10

Width






OD ID

W


120


I.D.

1010-1/2

1111-1/2

12131415161718

7/161/29/165/8

11/163/4

13/167/8

15/161

1-1/161-1/81-3/161-1/41-5/161-3/81-1/21-5/81-3/41-7/8

22-1/82-1/42-3/82-1/2

-274-275-276-277-278-279-280-281-282-283-284-309-310-311-312-313-314-315-316-317-318-319-320-321-322-323-324-325-326-327-328-329-330-331-332-333

10-1/410-3/411-1/411-3/412-1/413-1/414-1/415-1/416-1/417-1/418-1/413/167/8

15/161

1-1/161-1/81-3/161-1/41-5/161-3/81-7/161-1/21-9/161-5/8

1-11/161-3/41-7/8

22-1/82-1/42-3/82-1/22-5/82-3/42-7/8

1/81/81/81/81/81/81/81/81/81/81/83/163/163/163/163/163/163/163/163/163/163/163/163/163/163/163/163/163/163/163/163/163/163/163/163/16

DashNo.

O.D. I.D.

9.984±.05510.484±.06510.984±.06511.484±.06511.984±.06512.984±.06513.984±.06514.984±.06515.955±.07516.955±.08017.955±.085.412±.005.475±.005.537±.007.600±.009.662±.009.725±.010.787±.010.850±.010.912±.010.975±.0101.037±.0101.100±.0121.162±.0121.225±.0121.287±.0121.350±.0121.475±.0151.600±.0151.725±.0151.850±.0151.975±.0182.100±.0182.225±.0182.350±.0182.475±.020

.139±.004

.139±.004

.139±.004

.139±.004

.139±.004

.139±.004

.139±.004

.139±.004

.139±.004

.139±.004

.139±.004

.210±.005

.210±.005

.210±.005

.210±.005

.210±.005

.210±.005

.210±.005

.210±.005

.210±.005

.210±.005

.210±.005

.210±.005

.210±.005

.210±.005

.210±.005

.210±.005

.210±.005

.210±.005

.210±.005

.210±.005

.210±.005

.210±.005

.210±.005

.210±.005

.210±.005

Width I.D. Width

253.59±1.40266.29±1.40278.99±1.65291.69±1.65304.39±1.65329.79±1.65355.19±1.65380.59±1.65405.26±1.91430.66±2.03456.06±2.1610.46±0.1312.07±0.1313.64±0.1815.24±0.2316.81±0.2318.42±0.2519.99±0.2521.59±0.2523.16±0.2524.77±0.2526.34±0.2527.94±0.3029.51±0.3031.12±0.3032.69±0.3034.29±0.3037.47±0.3840.64±0.3843.82±0.3846.99±0.3850.17±0.4653.34±0.4656.52±0.4659.69±0.4662.87±0.51

3.53±0.103.53±0.103.53±0.103.53±0.103.53±0.103.53±0.103.53±0.103.53±0.103.53±0.103.53±0.103.53±0.105.33±0.135.33±0.135.33±0.135.33±0.135.33±0.135.33±0.135.33±0.135.33±0.135.33±0.135.33±0.135.33±0.135.33±0.135.33±0.135.33±0.135.33±0.135.33±0.135.33±0.135.33±0.135.33±0.135.33±0.135.33±0.135.33±0.135.33±0.135.33±0.135.33±0.13

Width






OD ID

W


121


I.D.

2-5/82-3/42-7/8

33-1/83-1/43-3/83-1/23-5/83-3/43-7/8

44-1/84-1/44-3/84-1/24-5/84-3/44-7/8

55-1/85-1/45-3/85-1/25-5/85-3/45-7/8

66-1/46-1/26-3/4

77-1/47-1/27-3/4

8

-334-335-336-337-338-339-340-341-342-343-344-345-346-347-348-349-350-351-352-353-354-355-356-357-358-359-360-361-362-363-364-365-366-367-368-369

33-1/83-1/43-3/83-1/23-5/83-3/43-7/8

44-1/84-1/44-3/84-1/24-5/84-3/44-7/8

55-1/85-1/45-3/85-1/25-5/85-3/45-7/8

66-1/86-1/46-3/86-5/86-7/87-1/87-3/87-5/87-7/88-1/88-3/8

3/163/163/163/163/163/163/163/163/163/163/163/163/163/163/163/163/163/163/163/163/163/163/163/163/163/163/163/163/163/163/163/163/163/163/163/16

DashNo.

O.D. I.D.

2.600±.0202.725±.0202.850±.0202.975±.0243.100±.0243.225±.0243.350±.0243.475±.0243.600±.0283.725±.0283.850±.0283.975±.0284.100±.0284.225±.0304.350±.0304.475±.0304.600±.0304.725±.0304.850±.0304.975±.0375.100±.0375.225±.0375.350±.0375.475±.0375.600±.0375.725±.0375.850±.0375.975±.0376.225±.0406.475±.0406.725±.0406.975±.0407.225±.0457.475±.0457.725±.0457.975±.045

.210±.005

.210±.005

.210±.005

.210±.005

.210±.005

.210±.005

.210±.005

.210±.005

.210±.005

.210±.005

.210±.005

.210±.005

.210±.005

.210±.005

.210±.005

.210±.005

.210±.005

.210±.005

.210±.005

.210±.005

.210±.005

.210±.005

.210±.005

.210±.005

.210±.005

.210±.005

.210±.005

.210±.005

.210±.005

.210±.005

.210±.005

.210±.005

.210±.005

.210±.005

.210±.005

.210±.005

Width I.D. Width

66.04±0.5169.22±0.5172.39±0.5175.57±0.6178.74±0.6191.92±0.6185.09±0.6188.27±0.6191.44±0.7194.62±0.7197.79±0.71100.97±0.71104.14±0.71107.32±0.76110.49±0.76113.67±0.76116.84±0.76120.02±0.76123.19±0.76126.37±0.94129.54±0.94132.72±0.94135.89±0.94139.07±0.94142.24±0.94145.42±0.94148.59±0.94151.77±0.94158.12±1.02164.47±1.02170.82±1.02177.17±1.02183.52±1.14189.87±1.14196.22±1.14202.57±1.14

5.33±0.135.33±0.135.33±0.135.33±0.135.33±0.135.33±0.135.33±0.135.33±0.135.33±0.135.33±0.135.33±0.135.33±0.135.33±0.135.33±0.135.33±0.135.33±0.135.33±0.135.33±0.135.33±0.135.33±0.135.33±0.135.33±0.135.33±0.135.33±0.135.33±0.135.33±0.135.33±0.135.33±0.135.33±0.135.33±0.135.33±0.135.33±0.135.33±0.135.33±0.135.33±0.135.33±0.13

Width






OD ID

W


122


I.D.

8-1/48-1/28-3/4

99-1/”9-1/29-3/4

1010-1/2

1111-1/2

121314151617181920212223242526

4-1/24-5/84-3/44-7/8

55-1/85-1/45-3/85-1/25-5/8

-370-371-372-373-374-375-376-377-378-379-380-381-382-383-384-385-386-387-388-389-390-391-392-393-394-395-425-426-427-428-429-430-431-432-433-434

8-5/88-7/89-1/89-3/89-5/89-7/810-1/810-3/810-7/811-3/811-7/812-3/813-3/814-3/815-3/816-3/817-3/8183/819-3/820-3/821-3/822-3/823-3/824-3/825-3/826-3/8

55-1/85-1/45-3/85-1/25-5/85-3/85-7/8

66-1/8

3/163/163/163/163/163/163/163/163/163/163/163/163/163/163/163/163/163/163/163/163/163/163/163/163/163/161/41/41/41/41/41/41/41/41/41/4

DashNo.

O.D. I.D.

8.225±.0508.475±.0508.725±.0508.975±.0509.225±.0559.475±.0559.725±.0559.975±.05510.475±.06010.975±.06011.475±.06511.975±.06512.975±.06513.975±.07014.975±.07015.955±.07516.955±.08017.955±.08518.955±.09019.955±.09520.955±.09521.955±.10022.940±.10523.940±.11024.940±.11525.940±.1204.475±.0334.600±.0334.725±.0334.850±.0334.975±.0375.100±.0375.225±.0375.350±.0375.475±.0375.600±.037

.210±.005

.210±.005

.210±.005

.210±.005

.210±.005

.210±.005

.210±.005

.210±.005

.210±.005

.210±.005

.210±.005

.210±.005

.210±.005

.210±.005

.210±.005

.210±.005

.210±.005

.210±.005

.210±.005

.210±.005

.210±.005

.210±.005

.210±.005

.210±.005

.210±.005

.210±.005

.275±.006

.275±.006

.275±.006

.275±.006

.275±.006

.275±.006

.275±.006

.275±.006

.275±.006

.275±.006

Width I.D. Width

208.92±1.27215.27±1.27221.62±1.27227.97±1.27234.32±1.40240.67±1.40247.02±1.40253.37±1.40266.07±1.52278.77±1.52291.47±1.65304.17±1.65329.57±1.65354.97±1.78380.37±1.78405.26±1.91430.66±2.03456.06±2.16481.41±2.29506.81±2.41532.21±2.41557.61±2.54582.68±2.67608.08±2.79633.48±2.92658.88±3.05113.67±0.84116.84±0.84120.02±0.84123.19±0.84126.37±0.94129.54±0.94132.72±0.94135.89±0.94139.07±0.94142.24±0.94

5.33±0.135.33±0.135.33±0.135.33±0.135.33±0.135.33±0.135.33±0.135.33±0.135.33±0.135.33±0.135.33±0.135.33±0.135.33±0.135.33±0.135.33±0.135.33±0.135.33±0.135.33±0.135.33±0.135.33±0.135.33±0.135.33±0.135.33±0.135.33±0.135.33±0.135.33±0.136.99±0.156.99±0.156.99±0.156.99±0.156.99±0.156.99±0.156.99±0.156.99±0.156.99±0.156.99±0.15

Width






OD ID

W


123


I.D.

5-3/45-7/8

66-1/46-1/26-3/4

77-1/47-1/27-3/4

88-1/2

99-1/2

1010-1/2

1111-1/2

1212-1/2

1313-1/2

1414-1/2

1515-1/2

1616-1/2

1717-1/2

1818-1/2

1919-1/2

2021

-435-436-437-438-439-440-441-442-443-444-445-446-447-448-449-450-451-452-453-454-455-456-457-458-459-460-461-462-463-464-465-466-467-468-469-470

6-1/46-3/86-1/26-3/4

77-1/47-1/27-3/4

88-1/48-1/2

99-1/2

1010-1/2

1111-1/2

1212-1/2

1313-1/2

1414-1/2

1515-1/2

1616-1/2

1717-1/2

1818-1/2

1919-1/2

2020-1/221-1/2

1/41/41/41/41/41/41/41/41/41/41/41/41/41/41/41/41/41/41/41/41/41/41/41/41/41/41/41/41/41/41/41/41/41/41/41/4

DashNo.

O.D. I.D.

5.725±.0375.850±.0375.975±.0376.225±.0406.475±.0406.725±.0406.975±.0407.225±.0457.475±.0457.725±.0457.975±.0458.475±.0558.975±.0559.475±.0559.975±.05510.475±.06010.975±.06011.475±.06011.975±.06012.475±.06012.975±.06013.457±.07013.975±.07014.475±.07014.975±.07015.475±.07015.955±.07516.455±.07516.955±.08017.455±.08517.955±.08518.455±.08518.955±.09019.455±.09019.955±.09520.955±.095

.275±.006

.275±.006

.275±.006

.275±.006

.275±.006

.275±.006

.275±.006

.275±.006

.275±.006

.275±.006

.275±.006

.275±.006

.275±.006

.275±.006

.275±.006

.275±.006

.275±.006

.275±.006

.275±.006

.275±.006

.275±.006

.275±.006

.275±.006

.275±.006

.275±.006

.275±.006

.275±.006

.275±.006

.275±.006

.275±.006

.275±.006

.275±.006

.275±.006

.275±.006

.275±.006

.275±.006

Width I.D. Width

145.42±0.94148.59±0.94151.77±0.94158.12±1.02164.47±1.02170.82±1.02177.17±1.02183.52±1.14189.87±1.14196.22±1.14202.57±1.14215.27±1.40227.97±1.40240.67±1.40253.37±1.40266.07±1.52278.77±1.52291.47±1.52304.17±1.52316.87±1.52329.57±1.52342.27±1.78354.97±1.78367.67±1.78380.37±1.78393.07±1.78405.26±1.91417.96±1.91430.66±2.03443.36±2.16456.06±2.16468.76±2.16481.46±2.29494.16±2.29506.86±2.41532.26±2.41

6.99±0.156.99±0.156.99±0.156.99±0.156.99±0.156.99±0.156.99±0.156.99±0.156.99±0.156.99±0.156.99±0.156.99±0.156.99±0.156.99±0.156.99±0.156.99±0.156.99±0.156.99±0.156.99±0.156.99±0.156.99±0.156.99±0.156.99±0.156.99±0.156.99±0.156.99±0.156.99±0.156.99±0.156.99±0.156.99±0.156.99±0.156.99±0.156.99±0.156.99±0.156.99±0.156.99±0.15

Width






OD ID

W


124


I.D.

2223242526--------------------

-471-472-473-474-475-901-902-903-904-905-906-907-908-909-910-911-912-913-914-916-918-920-924-928-932

22-1/223-1/224-1/225-1/226-1/23/321/83/161/45/163/87/161/29/165/8

11/163/4

13/167/81

1-1/81-1/41-1/21-3/4

2

1/41/41/41/41/4--------------------

DashNo.

O.D. I.D.

21.955±.10022.940±.10523.940±.11024.940±.11525.940±.120.185±.005.239±.005.301±.005.351±.005.414±.005.468±.005.530±.007.644±.009.706±.009.755±.009.863±.009.924±.009.986±.0101.047±.0101.171±.0101.355±.0121.475±.0141.720±.0142.090±.0182.337±.018

.275±.006

.275±.006

.275±.006

.275±.006

.275±.006

.056±.003

.064±.003

.064±.003

.072±.003

.072±.003

.078±.003

.082±.003

.087±.003

.097±.003

.097±.003

.116±.004

.116±.004

.116±.004

.116±.004

.116±.004

.116±.004

.116±.004

.116±.004

.116±.004

.116±.004

Width I.D. Width

557.66±2.54582.68±2.67608.08±2.79633.48±2.92658.88±3.054.70±0.136.07±0.137.65±0.138.92±0.1310.52±0.1311.89±0.1313.46±0.1816.36±0.2317.93±0.2319.18±0.2321.92±0.2323.47±0.2325.04±0.2626.59±0.2629.74±0.2634.42±0.3037.47±0.3643.69±0.3653.09±0.4659.36±0.46

6.99±0.156.99±0.156.99±0.156.99±0.156.99±0.151.42±0.081.63±0.081.63±0.081.83±0.081.83±0.081.98±0.082.08±0.082.21±0.082.46±0.082.46±0.082.95±0.102.95±0.102.95±0.102.95±0.102.95±0.102.95±0.103.00±0.103.00±0.103.00±0.103.00±0.10

Width

AN6227 is an Air Force-Navy Auronautical Standard that covers 88 sizes of AS568.MS28775 is the basic standard on which AS568 was developed. M25988, M83248,MS9020, MS9355, and MS29512 cover 31 O-Rings of slightly larger diameter crosssections to be used for sealing straight-thread tube fittings. These O-Rings are usu-ally referred to as “3 dash 9” O-rings and are equivalent to dash numbers 901through 932 of AS568. They are used in gland designs specified by military stan-dards MS16142, MS33649, and MS33656 for tube fittings.

Special sizes and custom made O-Rings are available in any material.Contact your EPM Customer Helper for details.



O-Ring Sizes - *Sizes in bold print are in stock andready to ship in NBR and VIT materials.

METRICSIZING CHART


OD ID

W

Actual O-Ring Size (mm)Actual O-Ring Size (mm) Actual O-Ring Size (mm)

125

Width(mm)1.001.001.001.001.001.001.001.001.001.001.001.001.001.001.001.001.001.001.001.001.001.001.001.001.001.001.001.001.001.00

1.151.251.501.802.002.502.703.003.303.504.004.505.005.506.006.507.007.207.508.008.509.009.50

10.0010.5011.0011.5012.0012.5013.00

------------------------------

I.D.(mm)

CrossRef.

Width(mm)1.001.001.001.001.001.001.001.001.001.001.001.001.001.001.001.001.001.001.001.001.001.001.001.001.001.001.001.001.001.001.001.001.001.021.021.15

13.5014.0014.5015.0015.5016.0016.5017.0017.5018.0018.5019.0019.5020.0020.5021.0021.5022.0022.5023.0023.5024.0024.5025.0028.0029.4029.9030.5031.8032.0039.0042.0060.001.782.5442.10

---------------------------------

BS606BS607

-

I.D.(mm)

CrossRef.

Width(mm)1.191.201.201.201.201.201.201.201.201.201.201.201.251.251.251.271.271.271.301.301.301.301.301.301.501.501.501.501.501.501.501.501.501.501.501.50

4.322.502.603.505.0024.0026.0028.0035.0040.0053.5098.003.808.0016.003.253.914.472.508.0010.0011.0013.5020.001.801.852.002.502.803.003.504.004.505.005.506.00

---------------------------

S3--

S4-

S5-

S6-

I.D.(mm)

CrossRef.




METRICSIZING CHART (continued)


OD ID

W


126

Width(mm)1.501.501.501.501.501.501.501.501.501.501.501.501.501.501.501.501.501.501.501.501.501.501.501.501.501.501.501.501.501.501.501.501.501.501.501.50

6.507.007.508.008.509.009.50

10.0010.5010.7011.0011.5012.0012.5013.0013.2513.5014.0014.5015.0015.5016.0016.5017.0017.5018.0018.5019.0019.5020.0020.5021.0021.5022.0022.5023.00

S7-

S8-

S9-

S10--

S11.2-

S12S12.5

---

S14-

S15-

S16---

S18---

S20---

S22---

I.D.(mm)

CrossRef.

Width(mm)1.501.501.501.501.501.501.501.501.501.501.501.501.501.501.501.501.501.501.501.501.501.501.501.501.501.501.501.501.501.501.501.501.501.501.501.50

23.5024.0024.5025.0025.5026.0026.5027.0027.5028.0028.5029.0029.5030.0030.5031.0031.5032.0032.5033.0033.5034.0034.5035.0035.5036.0036.5037.0037.5038.0038.5039.0039.5040.0041.0042.00

------------------------------------

I.D.(mm)

CrossRef.

Width(mm)1.501.501.501.501.501.501.501.501.501.501.501.501.501.501.501.501.501.501.501.501.501.501.501.501.501.501.501.501.501.501.501.501.501.501.501.50

43.0044.0045.0046.0047.0048.0049.0050.0051.0052.0053.0054.0055.0056.0057.0058.0059.0060.0061.0062.0063.0064.0065.0066.0067.0068.0069.0070.0071.0072.0073.0074.0075.0076.0077.0078.00

------------------------------------

I.D.(mm)

CrossRef.






OD ID

W


127

Width(mm)1.501.501.501.501.501.501.501.501.501.501.501.501.501.501.501.501.501.501.501.501.501.501.601.601.601.601.601.601.601.601.601.601.601.601.601.60

79.0080.0081.0082.0083.0084.0085.0086.0087.0088.0089.0090.0091.0092.0093.0094.0095.0096.0097.0098.0099.00100.002.202.752.803.103.203.704.104.705.005.106.107.108.109.10

------------------------------------

I.D.(mm)

CrossRef.

Width(mm)1.601.601.601.601.601.601.601.601.601.601.601.601.601.601.601.601.601.601.601.601.601.601.601.781.781.781.781.781.781.781.781.781.781.781.781.78

10.1011.1012.1013.1014.1015.1016.1017.1018.1019.1020.3021.1022.1025.1027.1029.1032.1035.1037.1051.1086.0096.60115.003.174.766.356.757.948.739.5211.1111.9119.0519.1521.4736.00

-----------------------

BS801BS802BS803BS610BS804BS611

-BS806

-----

I.D.(mm)

CrossRef.

Width(mm)1.781.781.781.781.781.781.781.781.781.781.781.781.781.781.781.781.781.781.781.781.781.781.781.781.781.801.801.801.801.801.801.801.801.801.801.80

36.2739.4545.8479.0085.3491.7098.05104.40110.74117.10123.44129.40135.76138.94142.11145.29148.46151.64154.81158.00161.16164.34167.51170.69173.871.802.002.242.502.803.153.553.754.004.504.87

BS517BS519

-BS532BS534BS536BS538BS540BS542BS544BS546BS548BS550BS551BS552BS553BS554BS555BS556BS557BS558BS559BS560BS561BS562

-----------

I.D.(mm)

CrossRef.






OD ID

W


128

Width(mm)1.801.801.801.801.801.801.801.801.801.801.801.801.801.801.801.801.801.801.801.801.801.801.801.801.801.901.901.901.901.901.901.901.901.901.901.90

5.005.155.305.606.006.306.706.907.107.508.008.508.769.009.5010.0010.6011.2011.8012.5013.2014.0015.0016.0017.002.402.602.803.403.703.804.204.804.905.705.80

---------------------------

P3--

P4-

P5--

P6

I.D.(mm)

CrossRef.

Width(mm)1.901.901.901.901.901.901.901.901.902.002.002.002.002.002.002.002.002.002.002.002.002.002.002.002.002.002.002.002.002.002.002.002.002.002.002.00

6.406.807.207.808.008.808.909.8067.102.002.502.603.003.504.004.504.605.005.506.006.507.007.508.008.509.009.50

10.0010.5011.0011.5012.0012.5013.0013.5014.00

-P7-

P8-

P9-

P10----------------------------

I.D.(mm)

CrossRef.

Width(mm)2.002.002.002.002.002.002.002.002.002.002.002.002.002.002.002.002.002.002.002.002.002.002.002.002.002.002.002.002.002.002.002.002.002.002.002.00

14.5015.0015.5016.0016.5017.0017.5018.0018.5019.0019.5020.0020.5021.0021.5021.9022.0022.5023.0023.5024.0024.5025.0025.5026.0026.5027.0027.5028.0028.5029.0029.5030.0030.5031.0031.50

---------------

S22.4---

S24-

S25-

S26---

S28-

S29-

S30--

S31.5S32

I.D.(mm)

CrossRef.






OD ID

W


129

Width(mm)2.002.002.002.002.002.002.002.002.002.002.002.002.002.002.002.002.002.002.002.002.002.002.002.002.002.002.002.002.002.002.002.002.002.002.002.00

32.0032.5033.0033.5034.0034.5035.0035.5036.0036.5037.0037.5038.0038.5039.0039.5040.0041.0041.5042.0042.5043.0043.5044.0044.5045.0045.5046.0047.0047.5048.0049.0049.5050.0051.0052.00

---

S34-

S35S35.5S36

---

S38-

S39-

S40--

S42-

S43-

S44-

S45-

S46--

S48--

S50---

I.D.(mm)

CrossRef.

Width(mm)2.002.002.002.002.002.002.002.002.002.002.002.002.002.002.002.002.002.002.002.002.002.002.002.002.002.002.002.002.002.002.002.002.002.002.002.00

52.5053.0054.0054.5055.0055.5056.0057.0058.0059.0059.5060.0061.0062.0062.5063.0064.0064.5065.0066.0066.5067.0068.0069.0069.5070.0070.5071.0072.0073.0074.0074.5075.0076.0077.0078.00

S53--

S55-

S56----

S60---

S63--

S65--

S67---

S70-

S71----

S75----

I.D.(mm)

CrossRef.

Width(mm)2.002.002.002.002.002.002.002.002.002.002.002.002.002.002.002.002.002.002.002.002.002.002.002.002.002.002.002.002.002.002.002.002.002.002.002.00

79.0079.5080.0081.0082.0083.0084.0084.5085.0086.0087.0088.0089.0089.5090.0091.0092.0093.0094.0094.5095.0096.0097.0098.0099.0099.50

100.00102.00104.50105.00109.00109.50110.00111.50114.50115.00

-S80

-----

S85-----

S90-----

S95-----

S100--

S105--

S110-

S112S115

-

I.D.(mm)

CrossRef.






OD ID

W


130

Width(mm)2.002.002.002.002.002.002.002.002.002.002.002.002.002.00

2.202.202.202.202.202.402.402.402.402.402.402.402.402.402.402.402.402.402.402.402.40

119.50120.00124.50125.60129.50130.00131.50134.50139.50140.00144.50149.50165.00180.00

12.406.009.0010.0018.003.303.604.304.605.305.505.606.306.607.307.507.608.008.308.609.30

S120-

S125-

S130-

S132S135S140

-S145S150

--

---------------------

I.D.(mm)

CrossRef.

Width(mm)2.402.402.402.402.402.402.402.402.402.402.402.402.402.402.402.402.402.402.402.402.402.402.402.402.402.402.402.402.402.402.402.402.402.402.402.40

9.609.80

10.3010.5010.6010.8011.0011.3011.5011.6011.8012.3012.6013.3013.5013.6013.8014.3014.5014.6014.8015.3015.5015.6015.8015.9016.3016.6017.3017.5017.6017.8018.3018.6019.3019.60

-P10A

---

P11P11.2

---

P12P12.5

----

P14---

P15---

P16------

P18----

I.D.(mm)

CrossRef.

Width(mm)2.402.402.402.402.402.402.402.402.402.402.402.402.402.402.402.402.402.402.402.402.402.402.402.402.402.402.402.402.402.402.402.402.402.402.402.40

19.8020.3020.5020.8021.3021.5021.6021.8022.3022.6023.3023.5023.6024.3024.5024.6025.0025.3025.6027.3027.5027.6029.6030.3031.6033.3034.6036.5037.6039.6041.6044.6047.6049.6051.6054.60

P20--

P21---

P22----------------------------

I.D.(mm)

CrossRef.






OD ID

W


131

Width(mm)2.402.402.402.402.402.402.402.502.502.502.502.502.502.502.502.502.502.502.502.502.502.502.502.502.502.502.502.502.502.502.502.502.502.502.502.50

57.6059.6061.6064.6067.6069.60161.604.004.605.005.506.006.507.007.508.008.509.009.50

10.0010.5011.0011.5012.0012.5013.0013.5014.0014.5015.0015.5016.0016.5017.0017.5018.00

------------------------------------

I.D.(mm)

CrossRef.

Width(mm)2.502.502.502.502.502.502.502.502.502.502.502.502.502.502.502.502.502.502.502.502.502.502.502.502.502.502.502.502.502.502.502.502.502.502.502.50

18.5019.0019.5020.0020.5021.0021.5022.0022.5023.0023.5024.0024.5025.0025.5026.0026.5027.0027.5028.0028.5029.0029.5030.0030.5031.0031.5032.0032.5033.0033.5034.0034.5035.0035.5036.00

------------------------------------

I.D.(mm)

CrossRef.

Width(mm)2.502.502.502.502.502.502.502.502.502.502.502.502.502.502.502.502.502.502.502.502.502.502.502.502.502.502.502.502.502.502.502.502.502.502.502.50

36.5037.0037.5038.0038.5039.0039.5040.0041.0042.0043.0044.0045.0046.0047.0048.0049.0050.0051.0052.0053.0054.0055.0056.0057.0058.0059.0060.0061.0062.0063.0064.0065.0066.0067.0068.00

------------------------------------

I.D.(mm)

CrossRef.






OD ID

W


132

Width(mm)2.502.502.502.502.502.502.502.502.502.502.502.502.502.502.502.502.502.502.502.502.502.502.502.502.502.502.502.502.502.502.502.502.502.502.502.50

69.0070.0071.0072.0073.0074.0075.0076.0077.0078.0079.0080.0081.0082.0083.0084.0085.0086.0087.0088.0089.0090.0091.0092.0093.0094.0095.0096.0097.0098.0099.00

100.00101.00102.00103.00104.00

-------------------------

BS616--

BS617-

BS813--

BS641-

BS643

I.D.(mm)

CrossRef.

Width(mm)2.502.502.502.502.502.502.502.502.502.502.502.502.502.502.502.502.502.502.502.502.502.502.502.502.502.502.502.502.502.502.502.502.502.502.502.50

105.00106.00107.00108.00109.00110.00111.00112.00113.00114.00115.00116.00117.00118.00119.00120.00121.00122.00123.00124.00125.00126.00127.00128.00129.00130.00131.00132.00133.00134.00135.00136.00137.00138.00139.00140.00

------------------------------------

I.D.(mm)

CrossRef.

Width(mm)2.502.502.502.502.502.502.502.502.502.50

2.622.622.622.622.622.622.622.622.622.622.622.622.622.622.622.622.622.652.652.652.652.652.652.652.65

141.00142.00143.00144.00145.00146.00147.00148.00149.00150.00

9.139.9011.9112.7013.1015.0815.8817.4617.8620.6422.2323.8174.3077.5080.6083.8092.7514.0015.0016.0017.0018.0019.0020.0021.20

----------

-BS613BS614BS807BS615

-BS809BS810

-BS812

-BS814BS640

-BS642

----------

I.D.(mm)

CrossRef.






OD ID

W


133

Width(mm)2.652.652.652.652.652.652.652.652.652.652.652.652.652.652.652.702.702.702.702.702.702.702.702.702.702.702.70

3.003.003.003.003.003.003.003.00

22.4023.6025.0025.8026.5028.0030.0031.5032.5033.5034.5035.5036.5037.5038.708.358.9010.5012.1013.6015.1016.9018.4018.6027.3028.40117.00

3.003.504.004.505.005.506.006.50

---------------------------

--------

I.D.(mm)

CrossRef.

Width(mm)3.003.003.003.003.003.003.003.003.003.003.003.003.003.003.003.003.003.003.003.003.003.003.003.003.003.003.003.003.003.003.003.003.003.003.003.00

7.007.508.008.509.009.50

10.0010.5011.0011.5012.0012.5013.0013.5014.0014.5015.0015.5016.0016.5017.0017.5018.0018.2018.5019.0019.2019.5020.0020.5021.0021.5022.0022.2022.5023.00

------------------------------------

I.D.(mm)

CrossRef.

Width(mm)3.003.003.003.003.003.003.003.003.003.003.003.003.003.003.003.003.003.003.003.003.003.003.003.003.003.003.003.003.003.003.003.003.003.003.003.00

23.5024.0024.2024.5024.6025.0025.2025.5026.0026.2026.5027.0027.5028.0028.5029.0029.2029.5030.0030.2030.5031.0031.5032.0032.2032.5033.0033.5034.0034.2034.5035.0035.5036.0036.2036.50

------------------------------------

I.D.(mm)

CrossRef.






OD ID

W


134

Width(mm)3.003.003.003.003.003.003.003.003.003.003.003.003.003.003.003.003.003.003.003.003.003.003.003.003.003.003.003.003.003.003.003.003.003.003.003.00

37.0037.2037.5038.0038.5039.0039.2039.5040.0040.2041.0041.5042.0042.2042.5043.0044.0044.2044.5045.0046.0047.0048.0049.0049.5050.0050.5051.0052.00

533.0054.0054.2054.5055.0056.0056.20

------------------------------------

I.D.(mm)

CrossRef.

Width(mm)3.003.003.003.003.003.003.003.003.003.003.003.003.003.003.003.003.003.003.003.003.003.003.003.003.003.003.003.003.003.003.003.003.003.003.003.00

57.0058.0059.0059.5060.0061.0062.0062.2063.0064.0064.5065.0066.0067.0068.0069.0069.5070.0071.0072.0073.0074.0074.5075.0076.0077.0078.0079.0079.5080.0081.0082.0083.0084.0084.5085.00

------------------------------------

I.D.(mm)

CrossRef.

Width(mm)3.003.003.003.003.003.003.003.003.003.003.003.003.003.003.003.003.003.003.003.003.003.003.003.003.003.003.003.003.003.003.003.003.003.003.003.00

86.0087.0088.0089.0089.5090.0091.0092.0093.0094.0094.5095.0096.0097.0098.0099.0099.50

100.00101.00102.00103.00104.00104.50105.00106.00107.00108.00109.00109.50110.00111.00112.00113.00114.00114.50115.00

------------------------------------

I.D.(mm)

CrossRef.






OD ID

W


135

Width(mm)3.003.003.003.003.003.003.003.003.003.003.003.003.003.003.003.003.003.003.003.003.003.003.003.003.003.003.003.003.003.003.003.003.003.003.003.00

116.00117.00118.00119.00119.50120.00121.00122.00123.00124.00124.50125.00126.00126.50127.00128.00129.00129.50130.00131.00132.00133.00134.00134.50135.00136.00137.00138.00139.00139.50140.00141.00142.00143.00144.00144.50

------------------------------------

I.D.(mm)

CrossRef.

Width(mm)3.003.003.003.003.003.003.003.003.003.003.003.003.003.003.003.003.003.003.003.003.003.003.003.003.003.003.003.003.003.003.003.003.003.003.003.00

145.00146.00147.00148.00149.00149.50150.00151.00152.00153.00154.00154.50155.00156.00157.00158.00159.00159.50160.00161.00162.00163.00164.00164.50165.00166.00167.00168.00169.00169.50170.00171.00172.00173.00174.00174.50

------------------------------------

I.D.(mm)

CrossRef.

Width(mm)3.003.003.003.003.003.003.003.003.003.003.003.003.003.003.003.003.003.003.003.003.003.003.003.003.003.003.003.003.003.003.003.003.003.003.003.00

175.00176.00177.00178.00179.00179.50180.00181.00182.00183.00183.50184.00184.50185.00186.00187.00188.00189.00189.50190.00191.00192.00193.00194.00194.50195.00196.00197.00198.00199.00199.50200.00201.00202.00203.00204.00

------------------------------------

I.D.(mm)

CrossRef.






OD ID

W


136

Width(mm)3.003.003.003.003.003.003.003.003.003.003.003.003.003.003.003.003.003.003.003.003.003.003.003.003.003.003.003.003.003.003.003.003.003.003.003.00

204.50205.00206.00207.00208.00209.00209.50210.00211.00212.00213.00214.00215.00216.00217.00218.00219.00219.50220.00221.00222.00223.00224.00225.00226.00227.00228.00229.00229.50230.00231.00232.00233.00234.00235.00236.00

------------------------------------

I.D.(mm)

CrossRef.

Width(mm)3.003.003.003.003.003.003.003.003.003.003.003.003.003.003.003.003.003.003.003.003.003.003.003.003.003.003.003.003.003.103.103.103.103.103.103.10

237.00238.00239.00239.50240.00241.00242.00243.00244.00245.00246.00247.00248.00249.00249.50250.00255.00259.30260.00264.00270.00280.00300.00315.00320.00350.00440.00505.00518.5024.2029.4034.4039.4044.4049.4054.40

-----------------------------

G25G30G35G40G45G50G55

I.D.(mm)

CrossRef.

Width(mm)3.103.103.103.103.103.103.103.103.103.103.103.103.103.103.103.103.103.103.203.203.203.503.503.503.503.503.503.503.503.503.503.503.503.503.503.50

59.4064.4069.4074.4079.4084.4089.4094.4099.40

104.40109.40114.40119.40124.40129.40134.40139.40144.40174.00219.50227.005.008.009.009.2010.0011.0012.0013.0014.0015.0016.0017.0017.5018.0019.00

G60G65G70G75G80G85G90G95G100G105G110G115G120G125G130G135G140G145

------------------

I.D.(mm)

CrossRef.






OD ID

W


137

Width(mm)3.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.50

20.0021.0021.7022.0022.1023.0023.7024.0024.7025.0025.2025.7026.0027.0027.7028.0028.7029.0029.2029.7030.0030.5030.7031.0031.2031.7032.0033.0033.7034.0034.7035.0035.2035.7036.0037.00

--

P22A-

P22.4-

P24-

P25-

P25.5P26

--

P28-

P29-

P29.5P30

--

P31-

P31.5P32

--

P34-

P35-

P35.5P36

--

I.D.(mm)

CrossRef.

Width(mm)3.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.50

37.7038.0038.7039.0039.7040.0040.7041.0041.7042.0043.0043.7044.0044.7045.0045.7046.0047.0047.7048.0048.7049.0049.7050.0051.0052.0053.0054.0055.0056.0057.0058.0059.0060.0061.0062.00

P38-

P39-

P40-

P41-

P42--

P44-

P45-

P46--

P48-

P49-

P50-------------

I.D.(mm)

CrossRef.

Width(mm)3.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.50

63.0064.0065.0066.0067.0068.0069.0070.0071.0072.0073.0074.0075.0076.0077.0078.0079.0080.0081.0082.0083.0084.0085.0086.0087.0088.0089.0090.0091.0092.0093.0094.0095.0096.0097.0098.00

------------------------------------

I.D.(mm)

CrossRef.






OD ID

W


138

Width(mm)3.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.50

99.00100.00101.00102.00103.00104.00105.00106.00107.00108.00109.00110.00111.00112.00113.00114.00115.00116.00117.00118.00119.00120.00121.00122.00123.00124.00125.00126.00127.00128.00129.00130.00131.00132.00133.00134.00

------------------------------------

I.D.(mm)

CrossRef.

Width(mm)3.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.50

135.00136.00137.00138.00139.00140.00141.00142.00143.00144.00145.00146.00147.00148.00149.00150.00151.00152.00153.00154.00155.00156.00157.00158.00159.00160.00161.00162.00163.00164.00165.00166.00167.00168.00169.00170.00

------------------------------------

I.D.(mm)

CrossRef.

Width(mm)3.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.50

171.00172.00173.00174.00175.00176.00177.00178.00179.00180.00181.00182.00183.00184.00185.00186.00187.00188.00189.00190.00191.00192.00193.00194.00195.00196.00197.00198.00199.00200.00201.00202.00203.00204.00205.00206.00

------------------------------------

I.D.(mm)

CrossRef.






OD ID

W


139

Width(mm)3.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.50

207.00208.00209.00210.00211.00212.00213.00214.00215.00216.00217.00218.00219.00220.00221.00222.00223.00224.00225.00226.00227.00228.00229.00230.00231.00232.00233.00234.00235.00236.00237.00238.00239.00240.00241.00242.00

------------------------------------

I.D.(mm)

CrossRef.

Width(mm)3.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.50

243.00244.00245.00246.00247.00248.00249.00250.00251.00252.00253.00254.00255.00256.00257.00258.00259.00260.00261.00262.00263.00264.00265.00266.00267.00268.00269.00270.00271.00272.00273.00274.00275.00276.00277.00278.00

------------------------------------

I.D.(mm)

CrossRef.

Width(mm)3.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.50

279.00280.00281.00282.00283.00284.00285.00286.00287.00288.00289.00290.00291.00292.00293.00294.00295.00296.00297.00298.00299.00300.00301.00302.00303.00304.00305.00306.00307.00308.00309.00310.00311.00312.00313.00314.00

------------------------------------

I.D.(mm)

CrossRef.






OD ID

W


140

Width(mm)3.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.50

315.00316.00317.00318.00319.00320.00321.00322.00323.00324.00325.00326.00327.00328.00329.00330.00331.00332.00333.00334.00335.00336.00337.00338.00339.00340.00341.00342.00343.00344.00345.00346.00347.00348.00349.00350.00

------------------------------------

I.D.(mm)

CrossRef.

Width(mm)3.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.50

351.00352.00353.00354.00355.00356.00357.00358.00359.00360.00361.00362.00363.00364.00365.00366.00367.00368.00369.00370.00371.00372.00373.00374.00375.00376.00377.00378.00379.00380.00381.00382.00383.00384.00385.00386.00

------------------------------------

I.D.(mm)

CrossRef.

Width(mm)3.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.50

387.00388.00389.00390.00391.00392.00393.00394.00395.00396.00397.00398.00399.00400.00401.00402.00403.00404.00405.00406.00407.00408.00409.00410.00411.00412.00413.00414.00415.00416.00417.00418.00419.00420.00421.00422.00

------------------------------------

I.D.(mm)

CrossRef.






OD ID

W


141

Width(mm)3.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.503.533.533.533.533.533.533.533.533.533.533.533.533.533.533.533.533.533.53

423.00424.00425.00426.00427.00428.00429.00430.00431.00432.00433.00434.00435.00436.00437.00438.00439.00440.0025.8039.7041.2842.8644.4546.0447.6249.2050.8052.4053.9755.5657.1558.7460.3261.9063.5065.10

------------------

BS618BS824BS825BS826BS827BS828BS829BS830BS831BS832BS833BS834BS835BS836BS837BS838BS839BS840

I.D.(mm)

CrossRef.

Width(mm)3.533.533.533.533.533.533.533.533.553.553.553.553.553.553.553.553.553.553.553.553.553.553.553.553.553.553.553.553.553.553.553.553.553.553.553.55

66.6768.2669.8571.4473.0274.60158.82319.2018.0019.0020.0021.2022.4023.6025.0025.8026.5028.0030.0031.5032.5033.5034.5035.5036.5037.5038.7040.0041.2042.5043.7045.0046.2047.5048.7050.00

BS841BS842BS843BS844BS845BS846

------------------------------

I.D.(mm)

CrossRef.

Width(mm)3.553.553.553.553.553.553.553.553.553.553.553.553.553.553.553.553.553.553.553.553.553.553.553.553.553.553.553.553.553.553.553.553.553.553.553.55

51.5053.0054.5056.0058.0060.0061.5063.0065.0067.0069.0071.0073.0075.0077.5080.0082.5085.0087.5090.0092.5095.0097.50100.00103.00106.00109.00112.00115.00118.00122.00125.00128.00132.00136.00140.00

------------------------------------

I.D.(mm)

CrossRef.






OD ID

W


142

Width(mm)3.553.553.553.553.553.553.553.553.553.553.553.553.603.603.603.603.603.603.603.603.603.603.603.603.603.604.004.004.004.004.004.004.004.004.004.00

145.00150.00155.00160.00165.00170.00175.00180.00185.00190.00195.00200.0018.3019.8021.3023.0024.6026.2027.8029.3030.8032.5034.1035.6037.3043.404.005.006.007.007.608.009.00

10.0011.0012.00

------------------------------------

I.D.(mm)

CrossRef.

Width(mm)4.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.00

13.0014.0014.5015.0016.0017.0018.0019.0020.0021.0022.0023.0023.5024.0025.0026.0027.0028.0029.0030.0031.0032.0033.0033.5034.0035.0036.0037.0038.0039.0039.5040.0041.0042.0043.0044.00

--

V15---------

V24----------

V34------

V40-----

I.D.(mm)

CrossRef.

Width(mm)4.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.00

45.0046.0047.0048.0049.0050.0051.0052.0053.0054.0054.5055.0056.0057.0058.0059.0060.0061.0062.0063.0064.0065.0066.0067.0068.0069.0070.0071.0072.0073.0074.0075.0076.0077.0078.0079.00

----------

V55--------------

V70----------

I.D.(mm)

CrossRef.






OD ID

W


143

Width(mm)4.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.00

80.0081.0082.0083.0084.0085.0086.0086.5087.0088.0089.0090.0091.0092.0093.0094.0095.0096.0097.0098.0099.00

100.00101.00102.00103.00104.00105.00106.00107.00108.00109.00110.00111.00112.00113.00114.00

-----

V85--------------

V100---------------

I.D.(mm)

CrossRef.

Width(mm)4.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.00

115.00116.00117.00118.00119.00120.00121.00122.00123.00124.00125.00126.00127.00128.00129.00130.00131.00132.00133.00134.00135.00136.00137.00138.00139.00140.00141.00142.00143.00144.00145.00146.00147.00148.00148.50149.00

-----

V120----------------------------

V150-

I.D.(mm)

CrossRef.

Width(mm)4.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.00

150.00151.00152.00153.00154.00155.00156.00157.00158.00159.00160.00161.00162.00163.00164.00165.00166.00167.00168.00169.00170.00171.00172.00173.00174.00175.00176.00177.00178.00179.00180.00181.00182.00183.00184.00185.00

-----------------------

V175------------

I.D.(mm)

CrossRef.






OD ID

W


144

Width(mm)4.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.00

186.00187.00188.00189.00190.00191.00192.00193.00194.00195.00196.00197.00198.00199.00200.00201.00202.00203.00204.00205.00206.00207.00208.00209.00210.00211.00212.00213.00214.00215.00216.00217.00218.00219.00220.00221.00

------------------------------------

I.D.(mm)

CrossRef.

Width(mm)4.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.00

222.00223.00224.00225.00226.00227.00228.00229.00230.00231.00232.00233.00234.00235.00236.00237.00238.00239.00240.00241.00242.00243.00244.00245.00246.00247.00248.00249.00250.00251.00252.00253.00254.00255.00256.00257.00

------------------------------------

I.D.(mm)

CrossRef.

Width(mm)4.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.00

258.00259.00260.00261.00262.00263.00264.00265.00266.00267.00268.00269.00270.00271.00272.00273.00274.00275.00276.00277.00278.00279.00280.00281.00282.00283.00284.00285.00286.00287.00288.00289.00290.00291.00292.00293.00

------------------------------------

I.D.(mm)

CrossRef.






OD ID

W


145

Width(mm)4.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.00

294.00295.00296.00297.00298.00299.00300.00301.00302.00303.00304.00305.00306.00307.00308.00309.00310.00311.00312.00313.00314.00315.00316.00317.00318.00319.00320.00321.00322.00323.00324.00325.00326.00327.00328.00329.00

------------------------------------

I.D.(mm)

CrossRef.

Width(mm)4.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.00

330.00331.00332.00333.00334.00335.00336.00337.00338.00339.00340.00341.00342.00343.00344.00345.00346.00347.00348.00349.00350.00351.00352.00353.00354.00355.00356.00357.00358.00359.00360.00361.00362.00363.00364.00365.00

------------------------------------

I.D.(mm)

CrossRef.

Width(mm)4.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.00

366.00367.00368.00369.00370.00371.00372.00373.00374.00375.00376.00377.00378.00379.00380.00381.00382.00383.00384.00385.00386.00387.00388.00389.00390.00391.00392.00393.00394.00395.00396.00397.00398.00399.00400.00401.00

------------------------------------

I.D.(mm)

CrossRef.






OD ID

W


146

Width(mm)4.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.00

402.00403.00404.00405.00406.00407.00408.00409.00410.00411.00412.00413.00414.00415.00416.00417.00418.00419.00420.00421.00422.00423.00424.00425.00426.00427.00428.00429.00430.00431.00432.00433.00434.00435.00436.00437.00

------------------------------------

I.D.(mm)

CrossRef.

Width(mm)4.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.00

438.00439.00440.00441.00442.00443.00444.00445.00446.00447.00448.00449.00450.00451.00452.00453.00454.00455.00456.00457.00458.00459.00460.00461.00462.00463.00464.00465.00466.00467.00468.00469.00470.00471.00472.00473.00

------------------------------------

I.D.(mm)

CrossRef.

Width(mm)4.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.00

4.504.504.504.504.504.504.504.50

474.00475.00476.00477.00478.00479.00480.00481.00482.00483.00484.00485.00486.00487.00488.00489.00490.00491.00492.00493.00494.00495.00496.00497.00498.00499.00500.00

6.008.009.009.5010.0010.5011.0012.00

---------------------------

--------

I.D.(mm)

CrossRef.






OD ID

W


147

Width(mm)4.504.504.504.504.504.504.504.504.504.504.504.504.504.504.504.504.504.504.504.504.504.504.504.504.504.504.504.504.504.504.504.504.504.504.504.50

13.0015.0015.5016.0017.0018.0019.0020.0021.0021.5022.0022.5023.0024.0024.5025.0026.0027.0027.5028.0028.5029.0029.5030.0031.0031.5032.0033.0034.0034.5035.0035.5036.0037.0037.5038.00

------------------------------------

I.D.(mm)

CrossRef.

Width(mm)4.504.504.504.504.504.504.504.504.504.504.504.504.504.504.504.504.504.504.504.504.504.504.504.504.504.504.504.504.504.504.504.504.504.504.504.50

39.0040.0040.5041.0042.0043.0044.0045.0046.0047.0048.0049.0050.0051.0053.0056.0057.0060.0061.0062.0063.0064.0065.0066.0068.0069.0070.0071.0073.0074.0075.0076.0080.0081.0083.0085.00

------------------------------------

I.D.(mm)

CrossRef.

Width(mm)4.504.504.504.504.504.504.504.504.504.504.504.504.504.504.504.504.504.504.504.504.504.504.504.504.504.504.504.504.504.504.504.504.504.504.504.50

86.0089.0090.0092.0093.5095.0097.5098.0099.50100.00100.50101.00103.50105.00106.00110.00115.00118.00120.00122.00124.00126.00128.00130.00131.50134.50137.00140.00140.50150.00153.00155.00157.00160.00165.00172.00

------------------------------------

I.D.(mm)

CrossRef.






OD ID

W


148

Width(mm)4.504.504.504.504.504.504.504.504.504.504.504.504.504.504.504.765.005.005.005.005.005.005.005.005.005.005.005.005.005.005.005.005.005.005.005.00

178.00180.00185.00186.00189.50192.00208.00215.00218.00225.00227.00250.00267.00280.00315.007.934.005.006.007.008.009.0010.0011.0012.0013.0014.0015.0016.0017.0018.0019.0020.0021.0022.0023.00

------------------------------------

I.D.(mm)

CrossRef.

Width(mm)5.005.005.005.005.005.005.005.005.005.005.005.005.005.005.005.005.005.005.005.005.005.005.005.005.005.005.005.005.005.005.005.005.005.005.005.00

24.0025.0026.0027.0028.0029.0030.0031.0032.0033.0034.0035.0036.0037.0038.0039.0040.0041.0042.0043.0044.0045.0046.0047.0048.0049.0050.0051.0052.0053.0054.0055.0056.0057.0058.0059.00

------------------------------------

I.D.(mm)

CrossRef.

Width(mm)5.005.005.005.005.005.005.005.005.005.005.005.005.005.005.005.005.005.005.005.005.005.005.005.005.005.005.005.005.005.005.005.005.005.005.005.00

60.0061.0062.0063.0064.0065.0066.0067.0068.0069.0070.0071.0072.0073.0074.0075.0076.0077.0078.0079.0080.0081.0082.0083.0084.0085.0086.0087.0088.0089.0090.0091.0092.0093.0094.0095.00

------------------------------------

I.D.(mm)

CrossRef.






OD ID

W


149

Width(mm)5.005.005.005.005.005.005.005.005.005.005.005.005.005.005.005.005.005.005.005.005.005.005.005.005.005.005.005.005.005.005.005.005.005.005.005.00

96.0097.0098.0099.00

100.00101.00102.00103.00104.00105.00106.00107.00108.00109.00110.00111.00112.00113.00114.00115.00116.00117.00118.00119.00120.00121.00122.00123.00124.00125.00126.00127.00128.00129.00130.00131.00

------------------------------------

I.D.(mm)

CrossRef.

Width(mm)5.005.005.005.005.005.005.005.005.005.005.005.005.005.005.005.005.005.005.005.005.005.005.005.005.005.005.005.005.005.005.005.005.005.005.005.00

132.00133.00134.00135.00136.00137.00138.00139.00140.00141.00142.00143.00144.00145.00146.00147.00148.00149.00150.00151.00152.00153.00154.00155.00156.00157.00158.00159.00160.00161.00162.00163.00164.00165.00166.00167.00

------------------------------------

I.D.(mm)

CrossRef.

Width(mm)5.005.005.005.005.005.005.005.005.005.005.005.005.005.005.005.005.005.005.005.005.005.005.005.005.005.005.005.005.005.005.005.005.005.005.005.00

168.00169.00170.00171.00172.00173.00174.00175.00176.00177.00178.00179.00180.00181.00182.00183.00184.00185.00186.00187.00188.00189.00190.00191.00192.00193.00194.00195.00196.00197.00198.00199.00200.00201.00202.00203.00

------------------------------------

I.D.(mm)

CrossRef.






OD ID

W


150

Width(mm)5.005.005.005.005.005.005.005.005.005.005.005.005.005.005.005.005.005.005.005.005.005.005.005.005.005.005.005.005.005.005.005.005.005.005.005.00

204.00205.00206.00208.00209.00210.00211.00212.00213.00214.00215.00216.00217.00218.00219.00220.00221.00222.00223.00224.00225.00226.00227.00228.00229.00230.00231.00232.00233.00234.00235.00236.00237.00238.00239.00240.00

------------------------------------

I.D.(mm)

CrossRef.

Width(mm)5.005.005.005.005.005.005.005.005.005.005.005.005.005.005.005.005.005.005.005.005.005.005.005.005.005.005.005.005.005.005.005.005.005.005.005.00

241.00242.00243.00244.00245.00246.00247.00248.00249.00250.00251.00252.00253.00254.00255.00256.00257.00258.00259.00260.00261.00262.00263.00264.00265.00266.00267.00268.00269.00270.00271.00272.00273.00274.00275.00276.00

------------------------------------

I.D.(mm)

CrossRef.

Width(mm)5.005.005.005.005.005.005.005.005.005.005.005.005.005.005.005.005.005.005.005.005.005.005.005.005.005.005.005.005.005.005.005.005.005.005.005.00

277.00278.00279.00280.00281.00282.00283.00284.00285.00286.00287.00288.00289.00290.00291.00292.00293.00294.00295.00296.00297.00298.00299.00300.00301.00302.00303.00304.00305.00306.00307.00308.00309.00310.00311.00312.00

------------------------------------

I.D.(mm)

CrossRef.






OD ID

W


151

Width(mm)5.005.005.005.005.005.005.005.005.005.005.005.005.005.005.005.005.005.005.005.005.005.005.005.005.005.005.005.005.005.005.005.005.005.005.005.00

313.00314.00315.00316.00317.00318.00319.00320.00321.00322.00323.00324.00325.00326.00327.00328.00329.00330.00331.00332.00333.00334.00335.00336.00337.00338.00339.00340.00341.00342.00343.00344.00345.00346.00347.00348.00

------------------------------------

I.D.(mm)

CrossRef.

Width(mm)5.005.005.005.005.005.005.005.005.005.005.005.005.005.005.005.005.005.005.005.005.005.005.005.005.005.005.005.005.005.005.005.005.005.005.005.00

349.00350.00351.00352.00353.00354.00355.00356.00357.00358.00359.00360.00361.00362.00363.00364.00365.00366.00367.00368.00369.00370.00371.00372.00373.00374.00375.00376.00377.00378.00379.00380.00381.00382.00383.00384.00

------------------------------------

I.D.(mm)

CrossRef.

Width(mm)5.005.005.005.005.005.005.005.005.005.005.005.005.005.005.005.005.005.005.005.305.305.305.305.305.305.305.305.305.305.305.305.305.305.305.305.30

385.00386.00387.00388.00389.00390.00391.00392.00393.00394.00395.00396.00397.00398.00399.00400.00415.00460.00470.0040.0041.2041.4042.5043.7045.0046.2047.5048.7050.0051.5053.0054.4054.5056.0058.0060.00

------------------------------------

I.D.(mm)

CrossRef.






OD ID

W


152

Width(mm)5.305.305.305.305.305.305.305.305.305.305.305.305.305.305.305.305.305.305.305.305.305.305.305.305.305.305.305.305.305.305.305.305.305.305.305.30

61.5063.0065.0067.0069.0071.0073.0075.0077.5080.0082.5085.0087.5090.0092.5095.0097.50

100.00103.00106.00109.00112.00115.00118.00122.00125.00128.00132.00136.00140.00145.00150.00155.00160.00165.00170.00

------------------------------------

I.D.(mm)

CrossRef.

Width(mm)5.305.305.305.305.305.305.335.335.335.335.335.335.335.335.335.335.335.335.335.335.335.335.335.335.335.335.335.335.335.505.505.505.505.705.705.70

175.00180.00185.00190.00195.00200.0074.6379.7389.69100.00109.54117.48120.65123.83127.00130.18133.35136.53139.70142.88146.05149.23155.00161.30167.70174.00291.69491.49702.6634.0072.0075.00145.0024.2035.2036.20

------

BS619BS620BS621BS622BS623BS860BS861BS862BS863BS864BS865BS866BS867BS868BS869BS870BS644BS645BS646BS647

----------

I.D.(mm)

CrossRef.

Width(mm)5.705.705.705.705.705.705.705.705.705.705.705.705.705.705.705.705.705.705.705.705.705.705.705.705.705.705.705.705.705.705.705.705.705.705.705.70

37.2039.2041.2044.2044.3045.2045.3047.2047.6049.2049.3049.6051.2051.6062.2062.3052.5052.6053.0054.2054.3054.6055.2055.3055.6057.2057.6059.2059.3059.6059.7061.2061.6062.0062.2062.30

--------

P48A--

P50A-

P52---

P53---

P55--

P56-

P58--

P60--

P62---

I.D.(mm)

CrossRef.






OD ID

W


153

Width(mm)5.705.705.705.705.705.705.705.705.705.705.705.705.705.705.705.705.705.705.705.705.705.705.705.705.705.705.705.705.705.705.705.705.705.705.705.70

62.6064.0064.2064.3064.6066.6067.2067.6069.0069.2069.3069.6070.2070.6071.2072.2072.3074.0074.2074.3074.6077.2079.0079.2079.3079.6081.2082.2084.0084.1084.2084.3084.6087.2089.0089.10

P63---

P65P67

-P68

---

P70-

P71------

P75----

P80------

P85---

I.D.(mm)

CrossRef.

Width(mm)5.705.705.705.705.705.705.705.705.705.705.705.705.705.705.705.705.705.705.705.705.705.705.705.705.705.705.705.705.705.705.705.705.705.705.705.70

89.2089.3089.6092.2094.0094.1094.2094.3094.6097.2099.0099.1099.2099.3099.60

101.60104.00104.10104.20104.30104.60109.00109.10109.20109.30109.60111.60114.00114.20114.30114.60119.00119.20119.30119.50119.60

--

P90-----

P95-----

P100P102

----

P105----

P110P112

---

P115----

P120

I.D.(mm)

CrossRef.

Width(mm)5.705.705.705.705.705.705.705.705.705.705.705.705.705.705.705.705.705.705.705.705.705.705.705.705.705.705.705.705.705.705.705.705.705.705.705.70

124.00124.30124.60125.30129.20129.30129.60131.60132.20133.20134.20134.30134.60139.20139.30139.60144.20144.30144.60149.20149.30149.60154.30159.30164.20164.30168.00169.30174.20174.30179.30184.30189.20189.30194.20194.30

--

P125---

P130P132

----

P135--

P140--

P145-

G150P150G155G160

-G165

-G170

-G175G180G185

-G190

-G195

I.D.(mm)

CrossRef.






OD ID

W


154

Width(mm)5.705.705.705.705.705.705.705.705.705.705.705.705.705.705.705.705.705.705.705.705.705.705.705.705.705.705.705.705.705.705.705.705.705.70

199.20199.30204.20209.20209.30219.30229.30234.30239.30249.30259.30269.30279.30289.20289.30299.30319.30329.30339.30349.30359.30379.30399.30419.30439.30449.20459.30479.30499.30519.30529.30594.00594.30725.00

-G200

--

G210G220G230

-G240G250G260G270G280

-G290G300

------------------

I.D.(mm)

CrossRef.

Width(mm)6.006.006.006.006.006.006.006.006.006.006.006.006.006.006.006.006.006.006.006.006.006.006.006.006.006.006.006.006.006.006.006.006.006.006.006.00

6.007.009.0010.0011.0012.0013.0014.0015.0016.0018.0019.0019.5020.0021.0022.0023.0023.5024.0025.0026.0027.0028.0029.0030.0031.0032.0033.0034.0035.0036.0037.0038.0039.0039.5040.00

------------------------------------

I.D.(mm)

CrossRef.

Width(mm)6.006.006.006.006.006.006.006.006.006.006.006.006.006.006.006.006.006.006.006.006.006.006.006.006.006.006.006.006.006.006.006.006.006.006.006.00

41.0041.5042.0043.0044.0044.5045.0046.0047.0048.0049.0050.0051.0052.0053.0054.0055.0056.0057.0058.0059.5060.0061.0062.0063.0064.0065.0066.0067.0068.0069.0070.0071.0072.0073.0074.00

------------------------------------

I.D.(mm)

CrossRef.






OD ID

W


155

Width(mm)6.006.006.006.006.006.006.006.006.006.006.006.006.006.006.006.006.006.006.006.006.006.006.006.006.006.006.006.006.006.006.006.006.006.006.006.00

75.0076.0078.0078.5079.0080.0081.0081.5084.0085.0086.0088.0089.0090.0092.0093.0095.0096.0098.0099.00

100.00101.00103.00104.00104.50105.00106.00108.00110.00111.00112.00114.00115.00118.00120.00122.00

------------------------------------

I.D.(mm)

CrossRef.

Width(mm)6.006.006.006.006.006.006.006.006.006.006.006.006.006.006.006.006.006.006.006.006.006.006.006.006.006.006.006.006.006.006.006.006.006.006.006.00

123.00124.00125.00126.00128.00130.00132.00134.00135.00136.00138.00139.20140.00142.00143.00145.00146.00148.00150.00153.00154.00155.00155.50156.00157.00158.00159.00160.00162.00165.00166.00169.00170.00172.00175.00176.00

------------------------------------

I.D.(mm)

CrossRef.

Width(mm)6.006.006.006.006.006.006.006.006.006.006.006.006.006.006.006.006.006.006.006.006.006.006.006.006.006.006.006.006.006.006.006.006.006.006.006.00

180.00182.00184.00185.00188.00190.00191.20193.00195.00196.00198.00200.00201.00202.00203.00203.50204.00205.00206.00208.00210.00212.00215.00216.00217.00218.00220.00221.00222.50226.00229.00230.00235.00236.00237.00237.50

----------------------------

V225-------

I.D.(mm)

CrossRef.






OD ID

W


156

Width(mm)6.006.006.006.006.006.006.006.006.006.006.006.006.006.006.006.006.006.006.006.006.006.006.006.006.006.006.006.006.006.006.006.006.006.006.006.00

238.00240.00242.00244.00247.00249.00250.00258.00259.00260.00262.00265.00266.00270.00272.00278.00280.00284.00285.00288.00290.00294.00295.00300.00301.00305.00310.00311.00315.00320.00321.50324.00325.00330.00333.00335.00

------------------------------------

I.D.(mm)

CrossRef.

Width(mm)6.006.006.006.006.006.006.006.006.006.006.006.006.006.006.006.006.006.006.006.006.006.006.006.006.006.006.006.006.006.006.006.006.006.006.006.00

338.00340.00345.00347.00348.00350.00355.00358.00360.00365.00368.00370.00375.00376.00380.00385.00386.00388.00389.00390.00392.00394.00395.00398.00400.00415.00422.00425.50429.00446.00448.00450.00453.00470.00478.00480.00

---------------------------

V430--------

I.D.(mm)

CrossRef.

Width(mm)6.006.006.006.006.006.006.006.006.006.006.006.006.006.006.006.006.006.006.006.996.996.996.996.996.996.996.996.996.996.996.996.996.996.996.996.99

483.00486.00489.00500.00504.00505.00508.00510.00516.00530.00540.00544.00549.00552.00555.00560.00569.00575.00579.00114.70124.60134.50155.60159.50161.90166.70168.30174.60181.00187.30193.70200.00208.92221.62234.32247.00

-------------------

BS624BS625BS626BS872BS627BS874BS628BS876BS878BS880BS882BS884BS886BS674BS676BS678BS680

I.D.(mm)

CrossRef.






OD ID

W


157

Width(mm)6.996.996.996.996.996.996.996.997.007.007.007.007.007.007.007.007.007.007.007.007.007.007.007.007.007.007.007.007.007.007.007.007.007.007.007.00

259.70272.40285.10297.80310.50323.20335.90675.1612.0054.0060.0070.0075.0082.0090.0095.00105.00110.00192.00206.00212.00218.00224.00230.00236.00243.00250.00250.37258.00265.00272.00280.00290.00300.00307.00315.00

BS682BS684BS686BS688BS648BS649BS650

-----------------------------

I.D.(mm)

CrossRef.

Width(mm)7.007.007.007.007.007.007.007.007.007.007.007.007.007.007.007.007.007.007.007.007.007.007.007.007.007.007.007.007.007.007.007.007.007.007.007.00

325.00335.00345.00355.00360.00365.00375.00387.00400.00412.00425.00437.00450.00457.20462.00475.00487.00490.00494.67500.00515.00530.00545.00545.47560.00580.00596.27600.00615.00630.00647.07650.00670.00699.00724.00730.50

------------------------------------

I.D.(mm)

CrossRef.

Width(mm)7.007.007.007.508.008.008.008.008.008.008.008.008.008.008.008.008.008.008.008.008.008.008.008.008.008.008.008.008.008.008.008.008.008.008.008.00

745.00760.00880.0075.0025.0042.0057.0060.0097.00100.00108.00114.00150.00160.00180.00195.00216.00226.00230.00240.00242.00260.00265.00280.00310.00326.00330.00350.00360.00400.00425.00450.00460.00490.00500.00520.00

------------------------------------

I.D.(mm)

CrossRef.






OD ID

W


158

Width(mm)8.008.008.008.408.408.408.408.408.408.408.408.408.408.408.408.408.408.408.408.408.408.408.408.408.408.408.408.408.408.408.408.408.408.408.408.40

630.00638.00800.00144.10149.10149.50154.10154.50159.10159.50164.10164.50169.10169.50174.10174.50179.10179.50184.10184.50189.10189.50194.10194.50194.10199.50204.10204.50208.50209.10209.50214.50219.10219.50224.50229.10

-----

P150A-

P155-

P160-

P165-

P170-

P175-

P180-

P185-

P190-

P195-

P200-

P205P209

-P210P215

-P220P225

-

I.D.(mm)

CrossRef.

Width(mm)8.408.408.408.408.408.408.408.408.408.408.408.408.408.408.408.408.408.408.408.408.408.408.408.408.408.408.408.408.409.009.009.009.009.009.009.00

229.50234.10234.50239.10239.50244.50249.10249.50254.50259.50264.50269.50274.50279.50284.50289.50294.50299.50304.00314.50319.50334.50339.50345.50359.50374.50375.00384.50399.5075.0084.00205.00316.00335.00360.00402.00

P230-

P235-

P240P245

-P250P255P260P265P270P275P280P285P290P295P300

-P315P320P335P340P355P360P375

-P3885P400

-------

I.D.(mm)

CrossRef.

Width(mm)9.009.009.0010.0010.0010.0010.0010.0010.0010.0010.0010.0010.0010.0010.0010.0010.0010.0010.0010.0010.0010.0010.0010.0010.0010.0010.0010.0010.0010.0010.0010.0010.0010.0010.00

451.00480.00545.0035.0038.0092.00105.00120.00140.00160.00195.00205.00228.00264.00270.00280.00292.00300.00315.00325.00330.00340.00360.00380.00450.00475.00524.50579.00633.50683.00700.00732.50782.00836.50

1044.00

-------------------------

V480V530V585V640V690

-V740V790V845V1055

I.D.(mm)

CrossRef.

Shadow Graphs - 1/16” WidthTo identify your O-Ring, print this graph at 100% onany standard printer. If 1 inch on the scale matchesup with 1 inch on any ruler, then your page is to scale.This will insure accurate identification of your O-Ring.






*Note: These larger O-Rings are not able to fit in whole on a letter-sized page. If you needhelp identifying your O-Ring, then contact your EPM Customer Helper for further assistance.

Shadow Graphs - Tube Fitting BossesTo identify your O-Ring, print this graph at 100% onany standard printer. If 1 inch on the scale matchesup with 1 inch on any ruler, then your page is to scale.This will insure accurate identification of your O-Ring.



armor-o-rings™ / ptfe-fep encapsulated o-rings€¦ · armor-o-rings™ / ptfe-fep encapsulated...

Documents