TFT-800

We deliver ready-to-connect fixtures that are fully tested for your Arkel ARL-500 lift controller. They can be put

into service on site via plug&play. Many Arkel PCBs and indicators are available directly ex stock. SCHAEFER

buttons, indicators, displays and luminous arrows can be easily integrated in the Arkel infrastructure.

� Fixtures, wiring and testing from a single source

� Easy plug&play installation on site

� Arkel components are available at SCHAEFER ex stock

� Simple combination option of SCHAEFER and Arkel compo-nents

Components and wiring from a single source

ARKEL WIRING

Landing Operating Panel - LOP Landing Indicator Panel - LIP Car Operating Panel - COP

Machine room

Lift controller

Lift car ceiling

Inspection box controller

ARCODE

ARCODE

IBC

BCBUT

CPC

ARCODE IO-0210

BCLCD-A with 2x LP 8080

LCD-240X128A

BC-D2

BC-D3

BCLCD-A

BCBUT

www.ws-schaefer.com

SCHAEFER GmbH

Winterlinger Str. 4 | 72488 Sigmaringen | Germany

Phone +49 7571 722-0 | Fax +49 7571 722-99 | info@ws-schaefer.com

For further information on our

products, please refer to our

online catalogue.:

products.ws-schaefer.com

LOP LIP COP

via IO-0210

Arke

l | V

1.0

| 03/

2018

| SC

HAEF

ER G

mbH

ARKEL components ARCODE compatible

BCBUTBCBUT (Landing Call Module) is used in landing fixtures without a display. Up to two call buttons can be connected. Programmable I /O, e.g. for a key switch or luminous arrow. AQ call and Gong modules from SCHAEFER can be optionally connected.

BC-D2-SerieTwo 30 mm 5x7 dot matrix call / indicator modules. Up to two call buttons can be connected. Presentati-on of running text, direction arrows, indication of overload and ‘out-of-operation’ texts. AQ call and Gong module from SCHAEFER can be optionally connected.

BC-D3-SerieThree 30 mm 5x7 dot matrix call / indicator modules. Up to two call buttons can be connected. Presen-tation of running text, direction arrows, indication of overload and ‘out-of-operation’ texts. AQ call and Gong module from SCHAEFER can be optionally connected.

BCLCD-ALCD indicator with a resolution of 128x64 pixels. Horizontal installation in lift car and indicator fixtu-res/vertical installation in landing fixtures. Two call buttons can be connected. AQ call and Gong mo-dule from SCHAEFER can be optionally connected. Direction arrow indicator, floor-dependent graphics, ‘out-of-operation’ and overload symbols.

LCD-240X128ALCD indicator with a resolution of 240x128 pixels (114x64 mm display area). Floor-dependent graphics, dynamic and static direction arrows, ‘out-of-operation’ and overload symbols, date and time option. LCD contrast can be adjusted.

CPCCar fixture node (Car Call Control Unit / Car Command Controller) for connecting buttons, indicators, emergency light, alarm, etc.

ARCODE IO-0210Arkel Bus to Gray/Binary Code converter for wiring SCHAEFER displays such as DMD, TFT, etc.

SCHAEFER components

DMD - Dot Matrix DisplaysDMD 27, DMD 30, DMD 35 and the dot matrix displays of series DMD 50 can be connected in the car fixture using the IO-0210 (Arkel Bus to Gray/Binary code converter).

TFTSCHAEFER TFT displays can be connected using the IO-0210 (Arkel Bus to Gray/Binary Code converter). An up-to-date overview of all TFTs can be found in our online catalogue at: products.ws-schaefer.com

Buttons and indicatorsSCHAEFER buttons (B 37, MT/RT/VB/EB/EBM 42, B 45, B 50 and MT 56) and indicators (D 37, MA/RA/VD/ED 42, D 45, D 50 and MA 56) can be connected via the BCBUT PCB in the landing fixture or the CPC PCB in the car fixture as well as the ARKEL indicators (BCLCD-A, BC-D3 und BC-D2).

Luminous arrowsLuminous and prism arrows such as LP 4848 LED, PP 4848 LED, LP 8080 and the EPSILON arrow EA 6644 can be connected via BC-D2, BC-D3 oder BCLCD-A.

Additionally, further SCHAEFER components can be wired to ARKEL controllers. Further information is available upon request.

COMPONENTS & USAGE

via IO-0210

via IO-0210

via CPC

via BCBUT,

BC-D2, BC-D3 or BCLCD-A

via BC-D2, BC-D3 or BCLCD-A