are you compliant?...system is compliant to the exposure control methods described in table 1 of 29...
TRANSCRIPT
DUST SOLUTIONS
Compliant Versions available by June 2017
YOUR FIRST LINE OF DEFENSE.
TOOLSOperate and maintain tool in accordance with manufacturer's instructions to minimize dust emissions.
• Read operator’s manual provided with tool and accessories.
• To minimize dust emissions use recommended shroud or cowling and dust extractor
Compliant Versions available by June 2017
ACCESSORIES AND SHROUDSUse drill or grinder equipped with commercially available shroud or cowling with dust collection system.
• All DEWALT shrouds and dust collection systems are commercially available.
DUST EXTRACTORSDust collector must provide the air flow recommended by the tool manufacturer, or greater, and have a filter with 99% or greater efficiency. Dust collector must have a cyclonic pre-separator or filter-cleaning mechanism. Cleaning/Drilling holes requires a vacuum with a HEPA filter.
• Both DWV010 and DWV012 provide the necessary airflow for drilling and hammering applications.
• Both DWV010 and DWV012 ship with dual HEPA filters, which have an efficiency of 99.97% of all particles greater than or equal to 0.3 microns.
• Both DWV010 and DWV012 have a timed automatic filter-cleaning mechanism.
ARE YOU COMPLIANT?The Occupational Safety and Health Administration (OSHA) rules with the intent to limit workers’ exposure to respirable crystalline silica. This rule requires engineering controls to keep workers from breathing silica dust.
5–6"
TUC
KPOI
NTIN
G/C
UTTI
NG*
DWE461002112223
5"/ 6" Cutting and TuckpointingDust Shroud
TOOL EXTRACTORATTACHMENT | ADAPTOR
+
DWV0120229761
or
DWV0102121475
Dust Extractor
DWV90002144052
AirLock™ AdaptorIncluded on DWV012 &
DWV010
DWE4022117785
DWE402N0235644
DWE42140234683
DWE4222N2161755
DWE431142126369
DWE43114N2126370
DWE431312126371
DWE431402126372
DWE431442126367
DWE43144N2126368
DWE431152126373
DWE43115N2126374
DWE430662126375
DWE43066N2126376
GRINDING1
DWE461522161761
5" Surface Grinding Dust Shroud5" S
URFA
CING
+
DWV0120229761
or
DWV0102121475
Dust Extractor
DWV90002144052
AirLock™ AdaptorIncluded on DWV012 & DWV010
1. System is compliant to the Exposure Control Methods described in Table 1 of 29 CFR 1926.1153 when outlined components are operated and maintained in accordance to manufacturer’s instructions, assuming that airflow is measured in accordance with the motor/fan system test. OSHA is reviewing the exact requirements for dust extraction in these applications.
* Also fits previous DEWALT models D28402, D28402N, D28110, D28112, D28114, D28114N, D28144, D28144N, D28131, D28140, D28115, D28115N, D28116, D28065, D28065N, D28066N
DEWALT’s Perform & Protect™ line of Power Tools is designed to provide a high level of one or more of the following: control, dust containment, or low vibration, without sacrificing performance.
Copyright ©2017 DEWALT. The following are examples of trademarks for one or more DEWALT power tools and accessories: the yellow and black color scheme; the “D”-shaped air intake grill; the array of pyramids on the handgrip; the kit box configuration; and the array of lozenge-shaped humps on the surface of the tool. JB Fastenal DW PNP OSHA Compliance Chart Flyer 032417.indd/RO/GDS/#17-358279
+
DWV0120229761
or
DWV0102121475
Dust Extractor
DWV90002144052
AirLock™ AdaptorIncluded on
DWV012 & DWV010
DWH050K0266511
Large Hammer Drilling Dust Extractionor
SDS
MAX
& S
PLIN
E DR
ILLI
NGCH
IPPI
NG &
DEM
OLIT
ION
DWH053K0266513
Large Hammer Chipping Dust Extraction
DWH053K0266513
Large Hammer Chipping Dust Extraction
DWH052K0266512
Breaker Dust Extraction
DCH481B2144080
D25481K2144086
D25501K0234150
D25603K2118388
D25721K2118389
D25723K2118390
D25761K2118391
D25763K2118392
D25553K0211586
D25651K0211588
D25810K2144083
D25831K0211591
D25851K0211592
D25891K0211593
D25941K0233464
SDS+
DRI
LLIN
G
D25301D0211598
Dust Extractor Telescopewith Hose
DWV91302144055
AirLock™ AdaptorIncluded on D25301D
+
+
DWV0120229761
or
DWV0102121475
Dust Extractor
DWV90002144052
AirLock™ AdaptorIncluded on
DWV012 & DWV010
DWH050K0266511
Large Hammer Drilling Dust Extraction
EXTRACTORATTACHMENT | ADAPTOR
1-1/8"
D25416K2118385
D25413K2118384
< 1-1/8"
D25052K2118383
D25133K0296806
D25260K0296807
D25223K D25262K0296808
D25263K0296809
D25313K0235526 D25323K
0226148
D25213K
DCH133M22164746
DCH213B DCH253B
D25324K0217455
D25333K DC212KA0235619
DRILLING
DWH303DH2126875
DWH304DH2126876
DCH273P2 0233676
DCH293R22164749
CORDLESS OPTIONS
TOOL
D25960K0266514
D259800233789
DWE4022117785
DWE402N0235644
DWE42140234683
DWE4222N2161755
DWE431142126369
DWE43114N2126370
DWE431312126371
DWE431402126372
DWE431442126367
DWE43144N2126368
DWE431152126373
DWE43115N2126374
DWE430662126375
DWE43066N2126376
D25899K0233462
D25901K0233463
The Occupational Safety and Health Administration (OSHA) rules with the intent to limit workers’ exposure to respirable crystalline silica. This rule requires engineering controls to keep workers from breathing silica dust.
D25601K2118387