arcoline-60

2
ARCOY Industries (India) Pvt. Ltd. Your partners in corrosion prevention An ISO 9001-2000 Certified Company ARCOLINE-60 ………. SPECIALLY BLENDED RUBBER LINING : ARCOY RUBBER Division offers a broad range of rubber lining materials to arrest various corrosive and erosive environments. Rubber products with varying characteristics are compounded for many different applications through the selection and combination of elastomeric bonding agents and fillers. ARCOLINE-60 is produced by mixing styrene, butadiene and isoprene rubber. These are also known as BR/IR/SBR. The primary attributes of this blend is excellent impact and dry wear resistance along with good abrasion properties, which gives Protection from impact wear abrasion caused by dry, sharp edge material and Good weathering resistance. The development of ARCOLINE-60 is done to get the best properties of all three Rubbers, which are having very good compatibility with each other to be blended homogeneously. Because of its Technicalities, it is applied Lining of vibratory feeders, chutes, storage bins, material transfer points, impact walls, filtering buckets where the abrasion and wear are needed. Apart from that for lagging driven pulleys, where medium to high tension is there this blend is very much suitable. 1 / 2

Upload: anant

Post on 20-Sep-2015

216 views

Category:

Documents


2 download

DESCRIPTION

Arcoline-60 content

TRANSCRIPT

  • ARCOY Industries (India) Pvt. Ltd.

    Your partners in corrosion prevention An ISO 9001-2000 Certified Company

    ARCOLINE-60 .

    SPECIALLY BLENDED RUBBER LINING : ARCOY RUBBER Division offers a broad range of rubber lining materials to arrest various corrosive and erosive environments. Rubber products with varying characteristics are compounded for many different applications through the selection and combination of elastomeric bonding agents and fillers.

    ARCOLINE-60 is produced by mixing styrene, butadiene and isoprene rubber. These are also known as BR/IR/SBR. The primary attributes of this blend is excellent impact and dry wear resistance along with good abrasion properties, which gives Protection from impact wear abrasion caused by dry, sharp edge material and Good weathering resistance.

    The development of ARCOLINE-60 is done to get the best properties of all three Rubbers, which are having very good compatibility with each other to be blended homogeneously. Because of its Technicalities, it is applied Lining of vibratory feeders, chutes, storage bins, material transfer points, impact walls, filtering buckets where the abrasion and wear are needed. Apart from that for lagging driven pulleys, where medium to high tension is there this blend is very much suitable.

    1 / 2

  • ARCOY Industries (India) Pvt. Ltd.

    Your partners in corrosion prevention An ISO 9001-2000 Certified Company

    ARCOLINE-60

    The above are the most commonly used lining systems. These systems are very versatile. For specific applications we develop special purpose bonding system materials. Data sheet for the same is as below.

    MATERIAL DATA SHEET

    Type ARCOLINE-60

    Polymer BR/IR/SBR

    Shore Hardness (+ 5) A 60

    Colour Black

    Specific Weight 1.12 gm/ cc

    Test Voltage (KV/ MM) 5

    Abrasion 90 mm cube

    Application notes Vibratory feeders, chutes, storage bins, material transfer points,

    impact walls, filtering buckets where abrasion and wear properties are required.

    All the above data is based on past experience. Kindly contact our Technical department for feedback and actual application.

    A R C O Y Industries (India) Pvt. Ltd. Your partners in corrosion prevention

    For any further information please contact the Technical Cell on the below mentioned Address / Contract No. 606,Abhijeet Bldg-1, Mithikhali Six Roads, Ellisbridge, Ahmedabad-380006 INDIA Phone : (91) 79-40275300 Fax : (91) 79-40275324 E-mail : [email protected] Visit us at : www.arcoy.com

    00082/GI 2 / 2