arburg, inc. customer training usa...molding machine • basics of lsr injection mould configuration...
TRANSCRIPT
Schedule Overview
2020
CUSTOMER TRAINING USA
© 2019 ARBURG GmbH + Co KG | All data and technical information have been compiled with great care. However we accept no responsibility for correctness. Individual illustrations and information may deviate from the actual delivery condition of the machine. The relevant valid operating instructions are applicable for the installation and operation of the machine.
Scan this code to visit our Media Center: in-depth,
captivating, entertaining.
ARBURG, Inc.644 West Street
Rocky Hill, CT 06067Tel.: +1 (860) 667 6500Fax: +1 (860) 667 6522
ARBURG, Inc.ARBURG Technology Center - California
51 Doppler, Irvine, CA 92618Tel.: +1 (949) 453 1313Fax: +1 (949) 753 5066
ARBURG, Inc.ARBURG Technology Center - Midwest2585 Millennium Drive, Elgin, IL 60124
Tel.: +1 (847) 488 1313Fax: +1 (847) 488 9011
6800
44_E
N_U
S_10
2019
· Su
bjec
t to
lter
atio
ns
Pr
inte
d in
Ger
man
y
3
Dear valued Customer,
The trademark of the ARBURG injection molding machines is
their versatility and flexibility. It is important therefore that you,
our customer, should be able to obtain a full understanding and
appreciation of its full capability.
For this particular reason ARBURG has put together this booklet to offer you
and your technicians the possibility of participating in training courses which will
enable you to acquire all the skills required to work with the ARBURG range of
injection molding machines.
Contained within this booklet is our training schedule for 2020 which includes the
current ARBURG training program subdivided into different courses according to
your specific requirements. Training classes are
offered at the ARBURG US-Headquarters in Rocky Hill, CT as well as at the two
ARBURG Technology Centers in Irvine, CA and Elgin, IL at the Southern Union State
Community College in Opelika, AL and at CEGEP in Thetford Mines, Quebec.
Once you have selected the course that is most suitable for you please contact our
training coordinator Connie DiDomenico at (860) 667-6500. She will assist you
with the respective arrangements.
Yours faithfully
ARBURG, Inc.
Juergen Giesow
Introducción
4
General information
Course times
8:30 AM - 4:30 PM
Costs
2 days $600.00
PT (Plastics Technology Course)
P (Machine Intensive Course)
3 days $600.00
R (MULTILIFT Robot System Course)
3 days $600.00
M-S (Machine Setting Course)
4 days $1000.00
SC (Service Course)
LSR (Processing Course)
Included:
Extensive course documents
and lunches.
Room reservations
If you require any assistance
making h otel arrangements,
we would be glad to help.
Course enquiries are also
possible via our website.
Registration / confirmation
Registration should take place no later
than 2 weeks before the course com-
mencement date.
We reserve the right to cancel the
courses in case the min. number of
participants is not reached.
For further information please call
Connie DiDomenico at
(860) 667-6500.
If your machine is not listed, there are
training courses avai lable that can be
held at your facility. Please contact AR-
BURG, Inc. for additional information.
Connie DiDomenico
5
Our Trainers
Tom Emmons
Tobias Pyka
Timo Koenig
Simon Blum
Marc Maulbetsch
Sebastian BehrensStefan Scheibner
Brian Murray Richard Emel
Marcus Hardt
6
ARBURG, Inc., Rocky Hill, CT
ARBURG Technology Center – California, Irvine, CA
ARBURG Technology Center – Midwest, Elgin, IL
Training facilities
7
US-HeadquartersARBURG, Inc.644 West StreetRocky Hill, CT 06067Tel.: (860) 667-6500Fax: (860) 667-6522www.arburg.usE-Mail: [email protected]
ATC – CaliforniaARBURG, Inc.51 DopplerIrvine, CA 92618Tel.: (949) 453-1313Fax: (949) 753-5066
ATC – MidwestARBURG, Inc.2585 Millennium DriveElgin, IL 60124Tel.: (847) 488-1313Fax: (847) 488-9011
Southern Union State Community College1701 Lafayette PkwyOpelika, AL 36801
CEGEP DE THETFORD671, Boulevard Frontenac OuestThetford Mines, QC G6G 1N1
Training facilities / Addresses
8
M
SC-H
SC-E
P
R
PT
LSR
Machine Setting Course
Basic course for machine operation and
programming theory and practice
Service Course
Hydraulic machines maintenance
Service Course
Electric machines maintenance
Intensive hands on Machine Setting Course
MULTILIFT SELECT Robot System Course
ARBURG Robot System MULTILIFT H
ARBURG Robot System MULTILIFT V
ARBURG Robot System MULTILIFT SELECT
Plastics Technology Course
Course on injection molding materials, processing,
part and mold design, troubleshooting and process
optimization
LSR Processing Course
Machine
Service
Technology
Automation
Overview
9
Course objective: Operation and processing with
ARBURG injection molding machines
Target group: Machine operators, set-up personnel and process engineers
Precondition: Basic knowledge of injection molding
Course duration: 3 days
Cost of course: $600.00
Documents: Course manual with accompanying texts
MMachine setting course
Course description
Topics Machine
M-S SELOGICA direct Setting ALLROUNDER A/E
Course Setting Course ALLROUNDER H
ALLROUNDER S
ALLROUNDER T
ALLROUNDER V
ALLROUNDER GOLDEN EDITION
Course content
• Discussion of typical machine features
• Introduction and exercises involving on-screen controls
• Mold installation and setting of clamping unit
• Setting of injection unit, regarding different plastic materials and
injection molded parts
• Optimization of machine setting
• Data collection and quality control
• Preventive maintenance
10
Course objective: Working with hydraulic and electric circuit diagrams,
Knowledge of the hydraulic and electric machine sequence.
Preventive maintenance. Effective trouble shooting. Machine calibration.
Target group: Service personnel, maintenance engineers, electricians,
electronic engineers.
Precondition: Basic knowledge of hydraulics, mechanics and electrics.
Course duration: 4 days
Course fee: $1000.00
Documents: Course manual with accompanying schematics.
Service course hydraulic machinesSC-H
Course description
Topics Machine
SC-H SELOGICA Service Course ALLROUNDER S
ALLROUNDER T
ALLROUNDER U
ALLROUNDER V
ALLROUNDER GOLDEN EDITION
Course content
• Introduction (overview and machine preparation)
• Machine’s functional sequence with process diagram
• Important electrical, mechanical and hydraulic components
• Electrical and hydraulic circuit diagrams and machine components
• Possible malfunctions and correction
• Calibration
• Taking measurements from the machine (electrical and hydraulic)
11
Course objective: Working with hydraulic and electric circuit diagrams,
Knowledge of the hydraulic and electric machine sequence. Preventive
maintenance. Effective trouble shooting. Machine calibration.
Target group: Service personnel, maintenance engineers, electricians,
electronic engineers.
Precondition: Basic knowledge of hydraulics, mechanics and electrics.
Course duration: 4 days
Course fee: $1000.00
Documents: Course manual with accompanying schematics.
Course description
Topics Machine
SC-E SELOGICA Service Course ALLROUNDER A/E
ALLROUNDER H
Course content
• Introduction (overview and machine preparation)
• Machine’s functional sequence with process diagram
• Important electrical, mechanical and hydraulic components
• Electrical and hydraulic circuit diagrams and machine components
• Possible malfunctions and correction
• Calibration
• Taking measurements from the machine (electrical and hydraulic)
Service course electric machines SC-E
12
Course objective: Gaining in depth knowledge on setting up a SELOGICA
controlled molding Machine
Target group: Senior Process Technicians, Process Engineers, Molding manager
and Plant Manager
Precondition: Participation of an ARBURG M class or several years of experience
in setting up SELOGICA controlled molding machines.
Course duration: 2 days
Course fee: $600.00
Documents: Course manual with accompanying text
Intensive Hands on Machine Setting CourseP
Course description
Topics Control Machine
P SELOGICA direct ALLROUNDER S
Intensive Course ALLROUNDER T
ALLROUNDER U
ALLROUNDER V
ALLROUNDER GOLDEN EDITION
Course content
• Finding Students will work to find the best process parameters for
the product
• Instructor will only guide and supervise
• Focus on the use of the graphic and monitoring functions as well
as SPC functions
• Use of different Plastic Materials
13
Course objective: Independent working with the MULTILIFT Robot System
Target Group: Set-up personnel, machine operators, production managers,
mold manufacturers and mold designers
Preqiusites: Participation in a SELOGICA machine setting course (M class)
Course duration: 3 days
Course fee: $600.00
Documents: Course manual with accompanying texts
Course description
Topics Robot System
R MULTILIFT H with SELOGICA control
MULTILIFT V with SELOGICA control
MULTILIFT SELECT with SELOGICA control
Course content
• Introduction, operation and programming of the MULTILIFT Robot System
• Various applications of programming with gripper or vacuum
take out sequence
• Good shot, bad shot, sample shot separation using the MULTILIFT
• Use of subroutines
• Preventative maintenance
MULTILIFT Robot System Course R
14
Course objective: Introduction to injection molding materials and processing
Target group: Machine operators, process engineers, production managers,
controllers, sales, designers, planners
Precondition: Basic knowledge of injection molding and
injection molding materials
Course duration: 2 days
Course fee: $600.00
Documents: Course manual with accompanying texts
PT Plastics Technology Course
Course description
Topics
PT Injection molding materials
Injection molding process
Course content
• Injection molding materials
• Structure and typical properties of injection molding materials
• Overview of common materials
• Amorphous and semi-crystalline injection molded materials
• Injection molding process
• Sequence of injection molding machine
• Influencing variables in injection molding
• Process parameters and their influence on injection molded parts
• Process optimization
15
Course objective: Developing knowledge of material properties and the injection
molding of liquid silicones (LSR)
Target group: Insatallation technicians, machine operators, mold designers,
process engineers
Requirements: Basic knowledge of injection molding and participation in a
machine adjustment course (M)
Course duration: 4 days
Course fee: $1000.00
Documents: Course folder and CD
"course will be instructed by a Toolmaker, Pump, Material and Machine
specialist"
Course description
Topics
PT Injection molding materials
Injection molding process
Course content
• Introduction to the structure/properties of plastics and LSR materials
• LSR-specific equipment of ALLROUNDERs
• LSR-specific programming, setting and monitoring of an injection
molding machine
• Basics of LSR injection mould configuration
• Process optimisation
• Review of Material Chemistry (done by material manufacturer)
• Review of Silicone Pumping System (done by a pump supplier)
• Review of different Silicone Molds (done by a Silicone Mold Maker)
Course on special processesLSR processing SV LSR
16
Rocky Hill, CT
Irvine, CA
N
S
EW
500 m
2000 ft
41.651085,-72.664086
91
411
91
West Street
Exit 23At the ramp turn right
Exit 23At the ramp turn left
Hartford
New Haven
ARBURG, Inc.644 West Street | Rocky Hill, CT 06067
405
5
N
S
EW
200 m
500 ft
33.636343, -117.737814
Irvine Center Dr
Bake Pkwy
Research Dr R
esearch Dr
Bake Pkwy
Joh
n W
ayn
e A
irp
ort
/
Ora
ng
e C
ou
nty
Air
po
rt Los Angeles
Muller
Doppler
Santa Ana
San
ta A
na
San
Die
go
ARBURG, Inc. | ATC California51 Doppler | Irvine, CA 92618
How to find us
Elgin, IL
N
S
EW
500 m
2000 ft
42.063532,-88.349225 C
hic
ago9034
90
Big Timber Rd
Highland Ave Co Hwy 47 Royal Blvd
Co Hwy21N
McL
ean
Blv
d
Boncosky Rd
N R
anda
ll Rd
Slee
py H
ollo
w R
d
ARBURG, Inc. | ATC Midwest 2585 Millennium Drive | Elgin, IL 60124
How to find us
We have taken into account that liability claims against ARBURG are excluded
in the event that a course participant should suffer injury on ARBURG's training
premises.
To: ARBURG, Inc. – Attn. Connie DiDomenico
Fax: (860) 667-6522 - [email protected]
From:
Date, Signature P.O. Number
Company:
Mr. /Mrs.
Address:
E-Mail:
Phone: Fax:
Registration for a Training Class at:
ARBURG, Inc. - Rocky Hill, CT
ARBURG, Inc. - Irvine, CA
ARBURG, Inc. - Elgin, IL
Southern Union State Community College, Opelika, AL
CEGEP DE THETFORD, Thedford Mines, QC
Type (M, SC, P, PT, R, LSR) Date of Course Participant
Registration form Fax
20
Notes
21
Notes
Schedule Overview
2020
CUSTOMER TRAINING USA
© 2019 ARBURG GmbH + Co KG | All data and technical information have been compiled with great care. However we accept no responsibility for correctness. Individual illustrations and information may deviate from the actual delivery condition of the machine. The relevant valid operating instructions are applicable for the installation and operation of the machine.
Scan this code to visit our Media Center: in-depth,
captivating, entertaining.
ARBURG, Inc.644 West Street
Rocky Hill, CT 06067Tel.: +1 (860) 667 6500Fax: +1 (860) 667 6522
ARBURG, Inc.ARBURG Technology Center - California
51 Doppler, Irvine, CA 92618Tel.: +1 (949) 453 1313Fax: +1 (949) 753 5066
ARBURG, Inc.ARBURG Technology Center - Midwest2585 Millennium Drive, Elgin, IL 60124
Tel.: +1 (847) 488 1313Fax: +1 (847) 488 9011
6800
44_E
N_U
S_10
2019
· Su
bjec
t to
lter
atio
ns
Prin
ted
in G
erm
any
Irvine, CA overview Course
M-SJanuary 29 - 31March 04 - 06April 01 - 03April 27 - 29June 01 - 03September 16 - 18October 13 - 15November 16 - 18December 14 - 16
SC-HFebruary 18 - 21November 03 - 06
SC-EMay 12 - 15September 22 -25
PFebruary 10 - 11April 13 - 14June 04 - 05October 05 - 06November 19 - 20December 07 - 08
PTMarch 02 - 03September 14 - 15
LSRMay 05 - 08
RFebruary 12 - 14April 15 - 17May 27 - 29October 07 - 09December 09 - 11
M-S January 22 - 24March 04 - 06March 10 - 12 (in Spanish)April 01 - 03April 20 - 22May 27 - 29September 09 - 11 (in Spanish)September 22 - 24October 21 - 23November 17 - 19 (in Spanish)December 14 - 16
SC-HMay 05 - 08October 27 - 30 (in Spanish)
SC-EFebruary 25 - 28June 02 - 05 (in Spanish)September 15 - 18
PMarch 23 - 24April 23 - 24June 08 -09October 05 - 06December 07 - 08
PTMarch 02 - 03May 18 - 19 (in Spanish)October 19 - 20
LSRDecember 01 - 04
RFebruary 19 - 21March 25 - 27May 20 - 22 (in Spanish)June 10 - 12October 07 - 09December 09 - 11
M-SMarch 24 - 26May 12 - 14September / October 29 - 01
M-SMarch 23 - 25 (in French)November 02 - 04 (in French)
PMarch 26 - 27 (in French)November 05 - 06 (in French)
Elgin, IL overview
Opelika, AL
Course
CourseCourse Thetford Mines, QC, Canada Course
22
M-SJanuary 22 - 24February 05 - 07March 18 - 20April 15 - 17June 01 - 03September 16 - 18October 06 - 08November 04 - 06December 07 - 09
SC-HMarch 10 - 13June 09 - 12October 20 - 23December 01 - 04
SC-EFebruary 11 - 14April / May 28 - 01September / October 29 - 02November 17 - 20
PFebruary 27 - 28April 20 - 21June 04 - 05October 12 - 13December 10 - 11
PTMarch 16 - 17May 18 - 19September 14 - 15November 02 - 03
LSRSeptember 22 - 25
RFebruary 24 - 26April 22 - 24May 20 - 22October 14 - 16December 14 - 16
Rocky Hill, CT overviewCourse
Irvine, CA overview Course
M-SJanuary 29 - 31March 04 - 06April 01 - 03April 27 - 29June 01 - 03September 16 - 18October 13 - 15November 16 - 18December 14 - 16
SC-HFebruary 18 - 21November 03 - 06
SC-EMay 12 - 15September 22 -25
PFebruary 10 - 11April 13 - 14June 04 - 05October 05 - 06November 19 - 20December 07 - 08
PTMarch 02 - 03September 14 - 15
LSRMay 05 - 08
RFebruary 12 - 14April 15 - 17May 27 - 29October 07 - 09December 09 - 11
M-S January 22 - 24March 04 - 06March 10 - 12 (in Spanish)April 01 - 03April 20 - 22May 27 - 29September 09 - 11 (in Spanish)September 22 - 24October 21 - 23November 17 - 19 (in Spanish)December 14 - 16
SC-HMay 05 - 08October 27 - 30 (in Spanish)
SC-EFebruary 25 - 28June 02 - 05 (in Spanish)September 15 - 18
PMarch 23 - 24April 23 - 24June 08 -09October 05 - 06December 07 - 08
PTMarch 02 - 03May 18 - 19 (in Spanish)October 19 - 20
LSRDecember 01 - 04
RFebruary 19 - 21March 25 - 27May 20 - 22 (in Spanish)June 10 - 12October 07 - 09December 09 - 11
M-SMarch 24 - 26May 12 - 14September / October 29 - 01
M-SMarch 23 - 25 (in French)November 02 - 04 (in French)
PMarch 26 - 27 (in French)November 05 - 06 (in French)
Elgin, IL overview
Opelika, AL
Course
CourseCourse Thetford Mines, QC, Canada Course
Schedule Overview
2020
CUSTOMER TRAINING USA
© 2019 ARBURG GmbH + Co KG | All data and technical information have been compiled with great care. However we accept no responsibility for correctness. Individual illustrations and information may deviate from the actual delivery condition of the machine. The relevant valid operating instructions are applicable for the installation and operation of the machine.
Scan this code to visit our Media Center: in-depth,
captivating, entertaining.
ARBURG, Inc.644 West Street
Rocky Hill, CT 06067Tel.: +1 (860) 667 6500Fax: +1 (860) 667 6522
ARBURG, Inc.ARBURG Technology Center - California
51 Doppler, Irvine, CA 92618Tel.: +1 (949) 453 1313Fax: +1 (949) 753 5066
ARBURG, Inc.ARBURG Technology Center - Midwest2585 Millennium Drive, Elgin, IL 60124
Tel.: +1 (847) 488 1313Fax: +1 (847) 488 9011
6800
44_E
N_U
S_10
2019
· Su
bjec
t to
lter
atio
ns
Pr
inte
d in
Ger
man
y