aquaflex hybrid adhesive demonstration
DESCRIPTION
Aquaflex Hybrid Adhesive Demonstration. Capo Beach, CA March 14, 2012. VCT and LVT installed over part Terrazzo and concrete. RH >90%. Gondolas jacked out of the way and floor lifted with a Terminator. - PowerPoint PPT PresentationTRANSCRIPT
AquaflexHybrid Adhesive Demonstration
Capo Beach, CA
March 14, 2012
VCT and LVT installed over part Terrazzo and concrete. RH >90%
Gondolas jacked out of the way and floor lifted with a Terminator
780 Diamatic, 3 head grinder (220v) with vacuum attachment over Terrazzo and concrete.
Setting Tile
Field was placed first, leaving perimeter for later. Section is set in wet adhesive in a walk-On-Work method after 20-25min
flash then rolled with 100lb roller. Perimeter tile is precut and set wet with 10-15min flash in a Walk-Off-Work (Wet Set)
method.
6 Months Later
Before After
The best part about the installation is that it occurred at night without 1 minute of disruption.
This alone saved Rite-Aid $1,000 in lost revenue and wages.
(6 months)