northwoodstm.com

Aqua KleenAqueous Parts Washing SolutionNever before has the power of nature been unleashed into such a tough industrial cleaning application, with so much benefit. North Woods® Aqua Kleen is a game changer, from both an end user and environmentally safe perspective. Harmful solvents, caustics, corrosive agents, butyls, and even mineral spirits can now be replaced in any facilityʼs parts washers! With Aqua Kleen, there is absolutely no reason to sacrifice performance either. Its non toxic, biodegradable, pleasantly scented formula quickly removes grease, oil, and carbon deposits safely and effectively.

Aqua Kleen is ultra low in VOCʼs, contains zero HAPʼs, and is totally free of all hazardous hydrocarbons. Gone is the day of harmful vapors, carcinogenic poisons, and environmental pollutants. Gone that is...if you start using North Woods® Aqua Kleen!

DIRECTIONS FOR USE PARTS WASHERS ~ 2:1 to 5:1ULTRASONIC EQUIPMENT~ 10:1PRESSURE WASHING ~ 20:1Designed for use in heated aqueous parts wash-ers, and ultrasonic cleaning equipment. Can be used in manual and pressure washing applica-tions too. Operate according to manufacturer’s instructions.

Note: Not intended for use in spray cabinets, or jet washingequipment.

Sump Cleaning CNC Machines Add Aqua Kleen at a ratio of 1.5% to the dirty (water soluble coolant) in sump. Run this way for 24 to 48 hours before clean out. Product will significantly reduce time spent and improve cleaning. If machining with oils, instead of water soluble coolant, then use Aqua Kleen full strength as a spray and wipe for superior soil removal inside cabinet.

BENEFITS• Solvent Free• Biodegradable• Non-flammable• Non-combustible• Non-caustic• Non-corrosive• Non-fuming• Non-toxic• Safe to use• Corrosion inhibitor• Meets and/or exceeds nationally

accepted green standards for parts cleaning

• Quickly removes grease, oils, and carbona-ceous soils

• Replaces hazardous solvents• Contains no HAP’s• Does not contain any chelating ingredients,

such as EDTA, caustics or chlorinated sol-vents

• Contains no silicone to interfere with new coatings or paint.

• Safe for use on aluminum and other non-ferrious metals.

• Will not build excessive foam.• Mild pH of 9.5 in concentrate

Designed for use in heated aqueous parts washers.