1

APRILIA RSV4 FRONT TURN SIGNALS

2

3

Remove stock mirrors and unplug connectors, only if installing block off plates. You can leave these on and install our turn signals. You will need to splice into harness if so. Otherwise our signals plug into OEM connectors.

If mounting block off plates, use provided hardware. (Pictures 1/2)

Take NRC signal and use stock screw inside fairing to mount. Begin by removing screw inside front fairing. Take new blinker and while using stock screw, mount onto fairing. (Pictures 3/4/5)

4 Repeat on other side.

5 Plug connectors in and test blinkers.