7/28/2019 Apr-Adm2 Programming Guide

1/2

DIGIPLEX PROGRAMMING METHOD

To enter In Touchs programming mode through any Digiplex

keypad:

APR-ADM2 can also be programmed using Digiplexs Module

Broadcastfeature as well as through the WinLoad Software. Refer

to the Digiplex Reference & Installation Manual for more

information on the Module Broadcast feature and to WinLoads

Online Help for information on programming with WinLoad. The

APR-ADM2s serial number can be found on its PC board.

DIGIPLEX APR-ADM2 PROGRAMMING GUIDE

SERIAL NUMBER: ___/ ___/ ___/ ___/ ___/ ___/ ___/ ___

LOCATION:_________________________________________

Bold = Default Settings

SPECTRA PROGRAMMING METHOD

To enter In Touchs programming mode through any Spec

keypad:

APR-ADM2 can also be programmed using the WinLoad Softwa

Refer to the WinLoad Online Help for more information.

SPECTRA APR-ADM2 PROGRAMMING GUIDE

LOCATION:_________________________________________

Bold = Default Settin

STEP 1: Press and hold the [0] key.

STEP 2: Enter the [INSTALLERCODE].

STEP 3: Enter section [953].

STEP 4: Enter APR-ADM2s 8-digit [SERIALNUMBER].

STEP 5: Enter the 3-digit [SECTION] you want to program.

STEP 6: Enter the required data.

SECTION [001]: Number of Rings

__/__/__ (001-255, 000 = disabled; default: 008)

SECTION [002]: Answering Machine Override

__/__/__ seconds (010-255, 000 = disabled, default: 000)

SECTION [003]: PGM Timer

__/__/__ seconds/minutes (001-255, 000 = disabled, default: 005)

SECTION [004]: General Options

Option OFF ON

[1] & [2] Future Use lN/A lN/A

[3] PGM Output lDisabled l Enabled

[4] PGM Time in lSeconds lMinutes

[5] to [8] Future Use lN/A l N/A

SECTION [005]: Partition Assignment

Option OFF ON

[1] Partition 1 l Disabled lEnabled

[2] Partition 2 l Disabled lEnabled

[3] Partition 3 l Disabled lEnabled

[4] Partition 4 l Disabled lEnabled

[5] to [8] Future Use l N/A lN/A

STEP 1: Press the [ENTER] key.

STEP 2: Enter your[INSTALLERCODE].

STEP 3: Enter the 3-digit [SECTION] you wish to program.

STEP 4: Enter the required [DATA].

SECTION [575]: Number of Rings

__/__/__ (001-255, 000 = disabled; default: 008)

SECTION [576]: Answering Machine Override

__/__/__ seconds (010-255, 000 = disabled, default: 000)

SECTION [577]: PGM Timer

__/__/__ seconds/minutes (001-255, 000 = disabled, default: 005

SECTION [578]: General Options

Option OFF ON

[1] Stand-alone Code

Length

l6-digits l 4-digits

[2] Partitioned System on

Spectra

lDisabled l Enabled

[3] PGM Output lDisabled l Enabled

[4] PGM Time in lSeconds lMinutes

[5] to [8] Future Use l N/A lN/A

7/28/2019 Apr-Adm2 Programming Guide

2/2

FIGURE 1: CONNECTINGTHE APR-ADM2 TOTHE CONTROL PANEL