appendix for the sar test report dosimetric … word -...
TRANSCRIPT
SAR_Report_Pfreundt_60120_6160122_FCC_IC_WK60XS_CalData Page 1 of 25
The Testcenter facility ‘Dosimetric Test Lab’ within IMST GmbH is accredited by the German National ‘Deutsche
Akkreditierungsstelle GmbH (DAkkS)’ for testing according to the scope as listed in the accreditation certificate: D-PL-12139-01-00.
Appendix for the SAR Test Report
Dosimetric Assessment of the Handheld Device WK60-XS from Pfreundt
(FCC ID: 2AITQWK60XS / IC: 21743-WK60XS)
According to the FCC Requirements Calibration Data
August 30, 2016
IMST GmbH
Carl-Friedrich-Gauß-Str. 2 - 4
47475 Kamp-Lintfort
Germany
Customer
Pfreundt
Ramsdorfer Str. 10
46354 Südlohn
Germany
Calibration Laboratory ofSchmid & Partner
Engineering AGZeuqhaussi.asse 43. aOO4 Zurich. Swil2erland
S Schweizerischer Kalibrlerdienst
^ Seruice suisse d'€talonnageU
seruizio svizzoro di taratura
S swiss calibrarion s.di.a
Accrediied bylh6 Swiss Accreditalion Ssrvicg (SAS)
The Swiss Accrediiaiion SsNic6 is one ofthe slgnaloiesto the EA
M ultilaieral Agreem€nt lor lhs recogn ition ot calibraliotr certilic.tes
ctient IMST
accredikiion No.: SCS 0108
cenncareNo: DAE4-631_Sep15
CALIBRATION CERTIFICATE
objecr DAE4 - SD 000 D04 BM - SN: 631
calibmrionproc€dur6(s) QACAL-06.V29Calibration procedure for the data acquisition electronics (DAE)
caribrallon darer September 16, 2015
Ths calbration c€rrilicatd do.Lme.ls th6 lracdabi ily lo n6l onalslandards, which realizelhe phys.alunits ol measuremenls (Sl).
The heasuGhents and lhe u.cerla nl€s wilh conld€nce probability ar€ giv6n on thelollowing pages and are part ol lhe cediiicale.
Allcalbralions have been conducled rn the closed aboralory iac lily: envi.onmsnt i€mperalu€ (22 r 3)'c and humidily< 70'l..
Calibral on Equipm€nt ussd (I4&TE ciiica tor calibrailon)
lo* cai Dale (Cediicare No.)
K6ithey MurimeierType 2oo1 lsN:081027e og'sep-rs (Nor17153) Sep-16
secondarv Standards I to * check Dale (in house) schedued check
ALrto DAE Caiibralion unii sE uws 053 AA 1001
SE UMS 006 AA ]OO2
06-Jan'15 ( n house.heck)
06-Jan'15 (in hous€ check)
ln house ch€ckrJan'16
l. house checkrJan-l6
D€pury'I€chniEl Managei -li v fl.(\i-tit\lssu€d: Seplember 21 , 2015
This calibralion cert iicaie shall not bB r€prodLced excepl in iullwilhoul written approvalol lhe laboratory.
Certilicaie No: DAE4.631 Sep15 Page 1 ot 5
Calibration Laboratory ofSchmid & Partner
Engineering AGZelghausstrasse 43, 8004 Zurich, Swii:erland
GlossaryDAE
Connector angle
S SchweizerischerKalibrierdienst
^ S€tuice suiose datalonnage
u seruizio svizero dirararura
S swiss calibratlo. Service
Accreaitation tlo.: SCS 0'108Accrediied by lhe Swss A.creditalion Seryice (SAS)
The Swiss Accreditation Sodice is one ot lhe signatories ro rhe EA
M ultilaleral Agreemeni lor rhe recognttion ol .atibratio. cartificate!
data acquisition electronicsinformation used in DASY system to align probe sensor X to the robotcoordinate system.
Methods Applied and lnterpretation oI Parameters. DC Voltage Measurement: Calibtalion Factor assessed for use in DASY system by
comparison with a calibrated instrument traceable to national standards. The figure givencorresponds to the full scale range of the voltmeter in the respective range.
. Connector angle: The angle of the connector is assessed measuring the anglemechanically by a tool inserted. Uncertainty is not required.
. The following parameters as documented in the Appendix contain technical information asresult from the performance test and require no uncertainty.
. DC Voltage Measurement Llnearity: Verification of the Linearity at +10% and -10./. ofthe nominal calibration voltage. lnfluence of offset voltage is included in thismeasurement.
. Common mode senslllylty. lnfluence of a positive or negative common mode voltage onthe diff erential measurement.
. Channel separallon. lnfluence of a voltage on the neighbor channels not subject to an
input voltage.
. AD Convefter Values with inputs shorted Values on the internal AD convertercorresponding to zero input voltage
. tnput Offset Measurement Output voltage and statistical results over a large number ofzero voltage measurements.
. lnput Oltset Cunent. Typical value for information; Maximum channel input offsetcurrent, not considering the input resistance.
. lnput resistance; Typical value for inlormation: DAE input resistance at the connector,
during internal auto-zeroing and during measurement.
. Low Battery Alarm Voltage:fypical value for information. Below this voltage, a battery
alarm signal is generated.
. Power consumption. Typical value for information. Supply currents in various operatingmodes.
cedilicale No: DAE4-631 Sepl5 Page 2 oi 5
DC Voltago MeasurementA,/D - Convo(er Resolution nominal
High Ranger 1LSB= 6.1[V, fullrangs= -100,,.+300 mV
Low Bange: 1LSB= 61nV, lullrangs= -1.,.,...+3mV
DASY m6asurement parameters: Auto Zero Im€: 3 6€oi M€asudng time: 3 s€c
Connector Angle
Cdibr.tlon Factors x z
High B.ng. 4C4,.12.4 t O.02% \k=21 404.288 t 0.02% (k=2) 406.230 r 0.02'16 (k=2)
Low Ranga 3.94876 t 1.sOo/. (k=2) 3.92970 t 1.s0% (k=2) s.0612s 1 1.s0% (k=2)
Connactor Angle to be used in DASY system 34.O ' t 1 "
certlrcat€ No: DAE4-631,sep15 Page 3 ol5
Appendix (Additional assessments oulside the scope ol SCS0iOS)
1. DC
2. Common mode sensitivityDASY
3. Channel separationDASY measuromenl paramelers: Aulo Zerc Time: 3 sec; ireasurinq lime: 3
voltaoe Linea
High Fenge Re6ding (pV) Ditference (xV) Error (7o)
ChannelX + lnput 199996.9s -0.91 -0.00
Chennel X + lnput 20005 10 2.7A 0.01
Channel X - lnput r9994.43 5.50 -0.03
ChannelY + lnput 199997.34 -0.15 -0.00
Chennel Y + lnput 20002.89 0.56 ooo
Chann€lY - lnput -19998.59 1.35 -0.01
ChennelZ + lnput 199996.76 -0.78 -0.00
ChannelZ + lnput 19998.67 -3.53 -o.o2
ChannelZ - lnput -20001 56 1.52 0.01
Low Bange Feading (UV) Dirlerence (rV) Error (7.)
Channel X + lnput 2003 43 '1 23 0.06
ChsnnelX + lnput 203.01 0.55 o.27
ChannelX - lnput -197.11 0.30 -0.15
ChannolY + lnpul 2002.93 0.80 0.04
ChennelY + lnput 202.57 o06 0.03
ChannelY - lnpul -198.11 -0.6a o34
ChannelZ + lnput 2003.73 1.61 ooa
ChannelZ + lnput 202 22 -o 17 -0.08
ChannelZ - lnput -198.66 1.16 0.59
rs: Aulo lero Iim6: 3 s6ci Measuflno trme. 3 sec
lnput Voltage (mV)HiEh FanEe
Avoraq€ Hoading (lrv)Low Range
Avorage Roading (lrv)
Ch.nnel X 200 2-'12 o.17
- 200 1.44 -0.19
Channel Y 200 18.88 18.76
- 200 -19 11 19 A4
Channel Z 200 4.O4 414
- 200 -6.10 -6 09
measu me:
lnput Voltage (mV) Channel X (t!V) Channel Y (pV) channelZ (pV)
ChannEl X 200 1.31 -3.22
ChannelY 200 9.67 o.37
Chennel z 200 7.04 8.17
Cedilicaie No: OAE4-631_Sep15 Page 4 ol5
4. AD-Converter Values with inputs shortedDASY measurement paramelers: Auto Zero Time: 3 sect Me
5. lnput Offset MeasurementDASY measurement parameiers: Aulo Zero Time: 3 sec; Measuring time: 3 secInput 1oMo
6. lnput Offset CurrentNominal lnput circuitry oflset current on all channels: <25fA
lnoui Resi7.
8. Low Batierv Alarm Volta
9.
feaSurenent pararrele's: AUlo zero ttrre: J sec Measunnq ttne' 3 sec
High Range (LSB) Low Range (LSB)
Channel X 15991 15900
Channel Y 15464 16613
Chann€l Z 16648 16469
n
Average ([V) min. Offsei (IrV) max. Offsel (pV)Std. Deviation
luv)
ChannelX 0.90 -0_10 2.77 447
0.04 1_68 0.99 a52
ChannelZ 0.01 140 0.51
n Resistance values for inJormalion
Zeroing (kOhm) Measurins (MOhm)
Channel X 200 200
Channel Y 200 200
Channel Z 200 200
atm cal values lor inlomatior
Typicalvalues Alarm Level (VDC)
Supply (+ Vcc) +79
Supply C Vcc) -7.6
Power Consum on I values for inlormalion
Typical values Switched off (mA) Siand by (mA) Transmitting (mA)
Supply (+ vcc) +0.01 +6 +14
Supply G Vcc) -0.01 -8
certficaie No: DAE4,631 Seol5 Page 5 of 5