Now in its ninth decade, Conbraco Industries, Inc. is a leading manufacturer of !ow controlproducts for U.S. and international markets. The company is based in Matthews, NC.

Conbraco has a history of new product development and innovation that dates back tothe company’s inception in 1928. Today, the Conbraco line of products includes ballvalves; butter!y valves; back!ow prevention devices; ground key cocks for gas, air,gasoline, steam and water; safety relief valves; water gauges; pipeline strainers; vacuumbreakers; valve actuators and more.

Conbraco’s vertically integrated manufacturing ensures a consistency of production,testing, quality and availability. It’s your assurance that Conbraco !ow control productswill deliver long term performance advantages. All Conbraco plants are registered to ISO9001 quality standards.

The Conbraco line continues to expand - with new products, designs and advancedmaterials - to better serve the needs of our customers in chemical processing, pulp andpaper, petroleum, residential and commercial plumbing and heating, manufacturing andother markets.

Throughout this catalog, products that have a Lead Free1 option will be identifiedwith this logo and the following statement applies:1LEAD FREE: The wetted surfaces of these products shall contain

no more than 0.25% lead by weighted average. Complies with CAAB 1953 and VT S.152. ANSI 3rd party certified & listed.

STANDARD BALL VALVES

www.apollovalves.com

4

Standard Ball Valve Ratings

Bronze Valves: 600 psig CWP, Cold, Non-shock. Standard Ball Valve Design Features(Exceptions: 3-way and Saturn valves) 150 SWP.

• Steel or 304 stainless steel handle with holeStainless Steel Valves (76 & 96 Series): for tagging.1/4” through 1”: 2,000 psig WOG/CWP • Blow-out resistant stem.1-1/4” through 2”: 1.500 psig WOG/CWP • Body: Bronze, stainless steel, carbon steel

(barstock, cast or forged), Alloy 20 and nickel.Carbon Steel Valves (89 and 93 Series): • RPTFE seats and seals, stu"ng box ring and1/4” through 1”: 2,000 psig WOG/CWP, -1/4” through seal washer.2”: 1500 psig WOG Cold, Non-shock

73A Series: 1/4” through 1”: 2,000 psig WOG/CWP, 1-1/4”through 2”: 1500 psig WOG/CWP Cold, Non-shock

Note: Seat material determines practical working pressures. Pressures referenced are body ratings.

STANDARD BALL VALVES

71 Series

Bronze ball valve with mounting pad; springreturn handle available. Sizes: 1/4” to 3”.

7K Series

Auto Draining; bronze full port ball valve with1/4” NPT tap for drain. Available withlock-closed-only lever. Sizes: 1/4” to 2-1/2”.

70 Series

Bronze ball valve with threaded or solder ends;chromium-plated ball. Available with latch lockhandle. Sizes 1/4” through 4”. 70-600 Series -Bronze 3-way diversion ball; large ports, 600WOG/CWP rating, 90° operation. Sizes 1/4”-3”.

32 Series

Reduced port economy bronze ball valve. Blow-out proof stem design. Adjustable packinggland. 400 psig WOG/CWP, cold non-shock.125 psig saturated steam. Vacuum service to29”Hg. Sizes 1/4” to 2”. Available with solderand threaded ends.

9A/90 Series

Saturn® bronze one piece ball valve; UL listed300 psig (9A rated 600 psig WOG/CWP);threaded ends. For fuel, inert gas, !ammableliquids; “tee” or lever handles. 90 Series sizes1/2” to 2”, 9A sizes 1/4” to 2”.

70-HC Series

Choose from bronze ball valve with solid brasscap and chain, bronze 4” NPT ball valve, bronzeinstrumentation ball valve, or purge and drainball valve models. Many options available.

STANDARD BALL VALVES

customer service (704) 841-6000

5

73A Series

Forged carbon steel construction, standard portdesign 2000 WOG/CWP to 1”. 1500WOG/CWP 1-1/4” to 2”. With actuatormounting pads and raised handle stops. NACEcompliant with SS trim. Sizes 1/4” to 2”.

76 Series

Stainless steel standard ball valve; investmentcast components. 2,000WOG/CWP to 1”, 1,000WOG/CWP 1-1/2” to 3”. Sizes: 1/4” to 3”.76-600 Series - Stainless steel 3-way diversionball valve; 800 psig WOG, investment castcomponents.

77C Series

Full port “Contractor Series” bronze ball valvewith solid chrome-plated ball for superior !owcharacteristics. U.S. made cast bronze body andend cap. NPT and ANSI B16.18 solder endconnections available. Sizes 1/4” to 2-1/2”.

74 Series

Chemical resistant nickel ball valve, blow-outresistant stem, stainless steel ever and nut andprecision investment cast components. Sizes:1/2” to 2”.

75 Series

Bronze padlockable ball valve; rated 600 psigWOG/CWP; stainless steel lever and nutoptional. Automatic drain available. Sizes 1/4”to 2”.

76-300/400 Series

Stainless steel ball valve with double unionends; blow-out proof stem, all wetted metallicparts are 316 stainless steel. RPTFE seats andseals, adjustable packing gland and stainlesssteel lever and nut. Sizes 1/2” to 2”.

77 Series

Bronze full port ball valve with mounting pad;designed for easy actuator mounting. Sizes 1/4”through 2-1/2”. Available in NPT and SAEthreads.

76F Series

Economy stainless steel full port valve, 1000#WOG/CWP rating. Threaded ends, blowoutproof stem, investment cast body, 316 SScomponents, including stainless handle. RPTFEseats and long life MPTFE packing. Sizes 1/4” to2”.

77W Series

Apollo-Press® ball valves are designed for directmechanical connection to copper tubing insizes 1/2”-2”. The 77W complies with ANSI/NSF61 Section 8 and is ideal for plumbing andheating systems. The press connections ensureeasyinstallation with standard crimping tools.

STANDARD BALL VALVES, THREE PIECE BALL VALVES

www.apollovalves.com

89 Series

Carbon steel ball valve with threaded ends;1500 and 2000 psig WOG/CWP; easy actuatormounting. Sizes 1/4” to 3”. (Actuator Readyversion: 89-ARX-64)

91 Series

Saturn® bronze one piece ball valve; rated 400psig for WOG cold non-shock. Threaded andsolder ends. Sizes 1/4” to 2”.

92-100 Series

Compact Saturn® bar stock steel unibody ballvalve. Certi#ed #re safe with graphite packing;RPTFE seats and seals, blowout-proof stemdesign. Sizes 1/4” to 2”.

93 Series

Saturn® carbon steel unibody ball valve;WOG/CWP rated 1500 to 2000 psig, cold,non-shock. Optionally meets API 607 fourthedition #re safe standards. Sizes 1/4” to 2”.

95 Series

Bronze stop and drain ball valve; 400 psigWOG/CWP rating; threaded or solder ends;many handle options available. Sizes 1/2”, 3/4”and 1”.

96 Series

Saturn® stainless steel unibody ball valve;WOG/CWP rated 1500 to 2000 psig; optionallymeets API 607 fourth edition #re safe designstandards; available with “tee”, round, and camlock handles.

82 Series

Bronze three piece full port ball valve; rated 600psig WOG/CWP; threaded, solder and brazedtube ends. In-line maintenance. Sizes 1/4”through 4”.

83A Series

Carbon steel, full port three piece ball valve.1500 psig WOG/CWP; stainless ball and stem,ISO 5211 mounting pad, stainless enclosedfasteners and topworks. Multi-piece V-ringpacking, gland plate style packing adjustmentand lockable. Available with threaded, socketweld and butt weld ends. Sizes 3/8” to 2”. Limitedoptions.

83B Series

Carbon steel, full port three piece ball valve.Class 600 (all sizes): stainless ball & stem, ASMEB16.34, ISO 5211 mounting pad, enclosed B8Mfasteners, stainless topworks, multi-piece V-ringpacking. Gland plate style packing adjustment,static grounding, spiral gaskets and lockable.Available with threaded, socket weld and buttweld ends. Sizes 3/8” to 2”. Numerous optionsincluding live-loading or tested to API 607 5thedition.

THREE PIECE BALL VAVLES

STANDARD BALL VALVES (cont’d)

6

THREE PIECE BALL VALVES, APOLLO® AR™ BALL VALVES

customer service (704) 841-6000

86A Series

Stainless steel, full port three piece ball valve.1500 psig CWP, ISO 5211 mounting pad,enclosed fasteners, multi-piece V-ring packing,gland plate style packing adjustment andlockable. Available with threaded, socket weldand butt weld ends. Sizes 3/8” to 2”. Limitedoptions.

86B Series

Stainless steel, full port three piece ball valve.Class 600; ASME B16.34, (all sizes), ISO 5211mounting pad, enclosed B8M fasteners, stainlesstopworks, multi-piece V-ring packing. Glandplate style packing adjustment, static grounding,spiral gaskets and lockable. Available withthreaded, socket weld and butt weld ends. Sizes3/8” to 2”. Numerous options includinglive-loading or tested to API 607 5th edition.

Apollo AR™ Ball Valve RatingsApollo AR actuator ready ball valves featurean ISO 5211-style mounting pad with nohandle to throw away. They are made forhigh cycle applications, and like all Apollovalves, the bodies are cast to the highestmetallurgical standards for long service life.

They are available in stainless steel, carbonsteel and bronze. They feature a live loadedmulti-stacked “V”-ring stem packing. Allmodels come standard with a stainless steelball and stem, and multi#ll seats, seals andpacking rated up to 2000 psig or to 450°F, orto 250 psig saturated steam. (Bronze rated to600 psig.)

71-AR Series

Bronze standard port ball valve with threadedends, ISO mounting pad, and advanced liveloaded packing design. Latch lock handleavailable. Sizes 3/4” to 3”.

APOLLO® AR™ BALL VALVES

76-AR Series

Stainless steel standard port ball valve.Investment cast components; ISO mountingpad and advanced live loaded packing design.Latch lock handle available. Sizes 1/4” to 3”.

77-AR Series

Bronze full port ball valve with threaded ends.ISO mounting pad and advanced live loadedpacking design. Latch lock handle available.Sizes 1/4” to 2”.

77D Series

Full port bronze ball valve with an integral ISO5211 mounting pad. Double o-ring stem sealand MPTFE seats and bearings. Sizes 1/2” to 2”with standard stainless steel ball and stem.

89-AR Series

Carbon steel standard port ball valve.Investment cast components, ISO mountingpad and advanced live loaded packing design.Latch lock handle available. Sizes 1/4” to 3”.

7

HEAVY DUTY, SPECIALTY, INTERNATIONAL BALL VALVES

www.apollovalves.com

Heavy Duty Apollo Ball Valves• Blow-out proof stem• Field repairable• RPTFE seats and stu"ng box rings• Meets WW-V-35C federal standards• Fire safe designs available• Expanded pressure ranges• High performance alloys

72 Series

Carbon steel high pressure ball valve. Rated3000 psig. Sizes 1/4” to 2”. Pressure is bodyrating.

87A Series

Stainless steel Class 150 and 300 !anged valve.Regular or full port, ISO 5211 actuatormounting pad. Sizes 1/2” to 12”

88A Series

Carbon steel Class 150 and 300 !anged valve.Regular or full port; ISO 5211 actuatormounting pad. Sizes 1/2” to 12”.

HEAVY DUTY APOLLO BALL VALVES

SPECIALTY VALVES399/87A-400/401R

Alloy 20 two piece, three piece, and Class 150!anged ball valves. Reinforced seats and seals;many other options available. Two piece sizes1/4” to 2”. Three piece sizes 1/2”-2”. Flanged sizes1/2” to 4”.

7K and 77K SV

Full port bronze secure vent valves. Ideal forautomatic venting of compressed air forpowering tools and equipment when the valveis in the closed position. Live loaded seats onupstream side. Available in 1/4” - 2” size with avariety of handles.

64 Series

Apollo International forged brass full port ballvalve. An economical valve that is available in1/4”-4” NPT and 1/2”-4” in sweat connections.Rated at 600 psig cold working pressure.

64W Series

Apollo International Apollo-Press ball valve in600 psig brass body. Available in 2-1/2” to 4”sizes. Ideal for installation in plumbing andheating systems, including potable water.

94A Series

Apollo International forged brass full port ballvalve in thread and sweat connections. Aneconomical valve that is available in 1/4” to 4”in NPT and 1/2” to 4” in sweat connections.Rated at 600 psig cold working pressure 1/4”-2”and 400 psig 2-1/2”-4”.

APOLLO INTERNATIONAL BALL VALVES

8

INTERNATIONAL BALL VALVES & TOP ENTRY BALL VALVES

customer service (704) 841-6000

95A Series

Apollo International forged brass full port stopand waste ball valve. Available in threaded andsweat connections and rated at 600 psig. Thisvalve features a side drain ideal for plumbing orhydronic heating systems.

IBV-125 Series

Apollo International !anged cast iron ballvalves can be used to replace any IBBMdimension gate valve or plug valve to give theconvience of quarter turn operation. Sizes2”-10” rated at 125 WSP and 250 WOG/CWP.Also available with FDA approved epoxycoating.

Top Entry Apollo Ball Valves• Sizes 1/2” to 12”• Temperatures - 150°F to +1,000°F• ANSI Pressure Class 150, 300, 600• 16 seating materials, four di$erent

con#gurations• High strength encapsulated metal

seat holders• 11 body materials• 11 ball and stem materials• Six end con#gurations• Standard bonnets, extended

bonnets and fugitive emissionsbonnets - all interchangeable

Butt Weld Series

Availbable in ANSI Class 300 to 8” and Class 600to 6” size. Schedule 10, 40 and some 80 pipeends o$ered. A full range of body, seat and sealmaterials are available.

Flanged Series

In 150, 300 and 600 ANSI Class. Materials: Alloy20, carbon steel, Hastelloy C, M35-1, nickel,stainless steel, titanium and others uponrequest. Sizes 1/2” to 10”.

TOP ENTRY APOLLO BALL VALVES

NPT and Socket Weld Series

Available in 300 ANSI Class sizes 1/2” to 3”; and600 ANSI Class 1/2” to 2”. Materials: Alloy 20,carbon steel, astelloy C, M35-1, nickel, stainlesssteel, titanium and others upon request. Fullport available in 300 ANSI class sizes 1/2” to 2”and 600 ANSI class sizes 1/2” to 1-1/2”.

Steam JacketedTop Entry Valves

Apollo Top Entry ball valves are ideally suited forjacketed applications. The top entry conceptallows for continued access to stem packingand valve internals for ease of maintenancewithout disturbing the jacket itself or removingthe valve from the pipeline.

9

www.apollovalves.com

ACTUATORS, INTERNATIONAL BUTTERFLY VALVES

AE Series

Electric actuators; torque output 200 to 1,000lb-in, NEMA 4 & 4X (water tight and corrosionresistant) enclosures. Thru shaft manualoverride. Reversing motors in 24, 115, 220 VACand 12 and 24 VDC. CSA listed.

CS/CL Series

Industrial quality reversing motor designelectric actuator. Operating torques from 150to 3,000 lb-in; AC and DC motors, extendedduty cycles; NEMA 4 and 7 enclosures.

LB Series

Electric actuators; torque output: 300 to 54,000lb-in; on/o$ or modulating control available.115 VAC 50/60 Hz single phase. 220/440 VAC -50/60 Hz three phase

APOLLO ELECTRIC ACTUATORS

LD/WD 141

General purpose/economy design for use inindustrial and HVAC/mechanical markets. TheWD141 Model is a wafer style valve; the LD141Model is a companion lug. Both are rated at 200psig bubble-tight shut o$ between !anges.They feature an extended neck length toprovide a minimum 2” clearance between valvetop plate and pipe !ange. LD/WD 141 Seriesmeet MSS SP-67 and API 609 speci#cations.

APOLLO INTERNATIONAL BUTTERFLY VALVES

Apollo actuators feature ISO 5211 interfacedimensions and NAMUR solenoid andaccessory interface dimensions. Apollo alsosupplies pre-engineered stainless steelvalve/actuator mounting kits for all Apollovalves equipped for automation. Available in13 sizes to complement torque requirements,with both spring return and double actingversions available. Spring return torque ratingsat 80 psig are from 39-41,341 lb-in. Doubleacting torque ratings at 80 psig range from 59

- 60, 623 lb-in.

Apollo “AcuTorque”

Apollo AcuTorque actuator is manufacturedwith an integral internal air manifold. Valveinterface dimensions are ISO 5211 standard.The solenoid mounting pad and slotted shaftare manufactured to NAMUR dimensionalstandards. For applications not requiring adirect mount solenoid valve, ports NPTthreaded. Investment cast steel body andunique drive pinion make the AcuTorque anexcellent choice for tough applications. Torqueoutputs from 21 to 20,929 lb-in.

APOLLO PNEUMATIC ACTUATORS

10

customer service (704) 841-6000

BACKFLOW PREVENTERS

4A-100 SeriesModel DC-4A

Bronze body double check assembly with topaccess check valves and test cocks. Featurescaptured spring cartridges and Apollo ball valveshuto$s with stainless steel trim. Contact localrepresentative or factory for approvals. Sizes1/2”-2”.

40-100 SeriesModel DC-40

Sizes 1/2” to 2”. Bronze body double checkvalves with Celcon poppets and stainless steelsprings. Full USC-FCCC&HR, AWWA, ASSE, CSAapprovals, and IAPMO listed. UL classi#ed andFM approved models.

BACKFLOW PREVENTERS

4SG-100 Model DC-4SG

Double Check Valves in sizes 2-1/2”-8”.(10”-DC4S) Light weight, short lay length, lowhead loss, with individual access to the checkvalves. FDA approved epoxy-coated ductileiron. Available shut-o$s: monitored butter!yvalves with supervisory switch, OS&Y and NRSgate valves. Horizontal and vertical installationapprovals.

4A-200 SeriesModel RP-4A

Bronze body reduced pressure back!owassembly with top access check valves and testcocks. Features captured spring cartridges andApollo ball valve shuto$s with stainless steelhandles and trim. Contact local representativeor factory for approvals. Sizes 1/2”-2”.

40-200 SeriesModel RP-40

Bronze body reduced pressure valves withCelcon® poppets and stainless steel springs.USC-FCCC&HR, ASSE, CSA approved, AWWA, ULclassi#ed and IAPMO listed. Sizes 1/4”-2”. *Alsoavailable in SS sizes 1/4” -1”.

40-200 SeriesModel RP-40

Sizes 2-1/2” to 10”. Fusion epoxy coatedductile iron body; 85-5-5-5 replacement seatsand stainless steel springs. Full USC-FCCC&HR,AWWA, ASSE, CSA, and FM approvals andIAPMO listed. UL classi#ed.

4N-300 SeriesModel DUC4N

Bronze body dual check with two capturedspring cartridges. ASSE and CSA approved forresidential back!ow protection at the watermeter. Multiple connection combinations.Sizes 3/8”-1”.

Model DUC-4FP

Bronze body dual check with two capturedspring cartridges. ASSE, CSA approved and ULclassi#ed for residential #re sprinkler systems.Sizes 1”, 1-1/4”.

40-400 SeriesModel DCAP

Bronze body dual check with atmospheric port.Noryl® poppets and stainless steel springs.ASSE and CSA approvals. Sizes: 1/2” and 3/4”.

11

BACKFLOW PREVENTERS

www.apollovalves.com

4A-500 SeriesModel PVB4A

Bronze body pressure vacuum breaker withinternal freeze relief valve and captured springcartridge. Features Apollo ball valve shuto$swith stainless steel handles and trim. Contactlocal representative or factory for approvals.Sizes 1/2”-2”.

4V-500 SeriesModel PVB4V

Pressure vacuum breaker protects irrigationsystems from freeze damage. Designed withplastic !oat and integral relief valve for freezeresistance; Apollo ball valves standard. Max.working pressure 150 psig. USC-FCCC&HR,ASSE, and CSA approvals. Sizes 1/2” to 2”.

4W-500 SeriesModel SVB4W

Spill-resistant pressure vacuum breaker (SVB) isdesigned to prevent contamination of potablewater due to back-siphonage and is ideallysuited for indoor and OEM applicationssupplied with continuous pressure where waterdischarge could cause problems. FullUSC-FCCC&HR, ASSE, and CSA approvals. Sizes1/4” to 1/2” Noryl® body.

4A-100 SeriesModel DC-4A

Double Check Valves in sizes 2-1/2”-12”.Stainless steel bodies 2-1/2”-8”, FDA Approvedepoxy-coated ductile iron 10” and 12”. PatentedTriForce ™ checks in all sizes for low head lossand short lay length. Available shuto$s:monitored butter!y valves with supervisoryswitch, OS&Y and NRS gate valves. Horizontaland vertical installation approvals.

4AN-100 SeriesModel DC-4AN

Double Check Valves in an n !ow pattern in sizes2-1/2”-12”. Stainless steel bodies 2-1/2”-8”, FDA-Approved epoxy-coated ductile iron 10” and 12”.Patented TriForce ™ checks in all sizes for lowhead loss and short lay length. Available shut-o$s: monitored butter!y valves with supervisoryswitch, OS&Y and NRS gate valves. Verticalup/vertical down and vertical up/vertical up in-stallation approvals.

4A-200 SeriesModel RP-4A

Reduced Pressure Principle Back!ow Preventersin sizes 2-1/2”-12”. Stainless steel bodies2-1/2”-8”, FDA Approved epoxy-coated ductileiron 10” and 12”. Patented TriForce ™ checks inall sizes for low head loss and short lay length.Available shuto$s: monitored butter!y valveswith supervisory switch, OS&Y and NRS gatevalves. Horizontal installation approvals.

4AN-200 SeriesModel RP-4AN

Reduced Pressure Principle Back!ow Preventersin an n !ow pattern in sizes 2-1/2”-12”. Stainlesssteel bodies 2-1/2”-8”, FDA-Approvedepoxy-coated ductile iron 10” and 12”. PatentedTriForce ™ checks in all sizes for low head lossand short lay length. Available shuto$s:monitored butter!y valves with supervisoryswitch, OS&Y and NRS gate valves. Verticalup/vertical down and vertical up/vertical upinstallation approvals.

4A-600 SeriesModel DCDA-4A

Double Check Detector Assemblies in sizes2-1/2”-12”. Stainless steel bodies 2-1/2”-8”,FDA-Approved epoxy-coated ductile iron 10”and 12”. Patented TriForce™ checks in all sizesfor low head loss and short lay length. Availableshuto$s: monitored butter!y valves withsupervisory switch, S&Y and NRS gate valves.Horizontal and vertical installation approvals.

4AN-600 SeriesModel DCDA-4AN

Double Check Detector Assemblies in an n !owpattern in sizes 2-1/2”-12”. Stainless steel bodies2-1/2”-8”, FDA-Approved epoxy-coated ductileiron 10” and 12”. Patented TriForce™ checks inall sizes for low head loss and short lay length.Available shuto$s: monitored butter!y valveswith supervisory switch, OS&Y and NRS gatevalves. Vertical up/vertical down and verticalup/vertical up installation approvals.

12

BACKFLOW PREVENTERS (cont’d)

BACKFLOW PREVENTERS, VACUUM BREAKERS

customer service (704) 841-6000

4SG-600 SeriesModel DCDA4SG

Double Check Detector Assembly in sizes2-1/2”-8”. (10”-4S-600) Light weight for ease ofinstallation in #re or automatic sprinklersystems. Provides precise monitoring capabilityto unauthorized water usage. Availableshut-o$s: monitored butter!y valves withsupervisory switch and resilient seated OS&Ygate valves. Vertical and horizontal approvals.

40-700 SeriesModel RPDA40

Reduced Pressure Detector Assembly. Detectsunauthorized use of water in #re and sprinklersystems. Ductile iron body is epoxy coated withbronze metered bypass. Working pressures to175 psig; operating temperatures, 33°F to 140°F.Approved ASE 1047, FM, UL Classi#ed, USC’sFCCC&HR. Sizes 3” to 10”

4C-100 SeriesModel CBBP

ASSE 1022 approved carbonated beverageback!ow preventer. Protects against copperpoisoning by preventing carbonated waterfrom being drawn into copper pipes. All wettedcomponents are non-toxic, corrosion resistant,and approved for use with potable water.Suitable for supply pressures to 150 psig andwater temperatures from 33° to 130°F. CSAcerti#ed to NSF61 and IAPMO approved. Sizes1/4” and 3/8”.

Model TKU Series

Apollo three and #ve valve test kits arelightweight and portable. They come equippedwith a gauge, hoses and all required #ttings ina protective molded plastic case. For DCV, RPZ,DVB and SVB back!ow preventers.

NEW - Apollo now o$ers test kit calibration

4A-700 SeriesModel RPDA-4A

Reduced Pressure Detector Assemblies in sizes2-1/2”-12”. Stainless steel bodies 2-1/2”-8”, FDAApproved epoxy-coated ductile iron 10” and12”. Patented TriForce ™ checks in all sizes forlow head loss and short lay length. Availableshuto$s: monitored butter!y valves withsupervisory switch, OS&Y and NRS gate valves.Horizontal installation approvals.

4AN-700 SeriesModel RPDA-4AN

Reduced Pressure Detector Assemblies in an n!ow pattern in sizes 2-1/2”-12”. Stainless steelbodies 2-1/2”-8”, FDA Approved epoxy-coatedductile iron 10” and 12”. Patented TriForce ™checks in all sizes for low head loss and short laylength. Available shuto$s: monitored butter!yvalves with supervisory switch, OS&Y and NRSgate valves. Vertical up/vertical down andvertical up/vertical up installation approvals.

VACUUM BREAKERS

38-100 Model AVB1

Economical, lightweight and compactprotection against back-siphonage and lowhazard cross connections. Meets ASSE and CSAstandards; listed with IAMPO. For hot and coldwater service up to 212°F at 125 psig for 1” andup to 180°F at 125 psig for 1/4”-2”.

38-502 Model LFVB

Potable water back!ow protection for labfaucets, community sinks, beauty salons, barbershopes. ASSE, CSA approved; IAPMO listed.Brass body, polished chrome plating, stainlesssteel internal parts. 3/8” FNPT standard; 1/4”optional. Adapters simplify installation.

13

PRESSURE REDUCING VALVES, MIXING VALVES

www.apollovalves.com

36 SeriesModel PRV

All bronze construction. Supply pressures to300 psig; standard outlet range 25 to 75 psig;other pressures available. Max workingtemperature of 180°F. Bronze body, replaceablecartridge, built in by-pass and high-capacitystainless steel strainer. Many end connectionoptions, union pipe end standard. Meets ASSE,CSA and ANSI standards and is listed withIAPMO. Sizes: 1/2” to 2”.

36C SeriesModel PRVC

Compact and corrosion-resistant. Supplypressures up to 400 psig; built in by-passrelieves excessive pressure buildup. Workingtemperatures to 180°F, 50 psig standard factorysetting; easy screw adjustment. Meets ASSE,CSA and ANSI standards and is listed withIAPMO. FNPT, sweat union, PEX union or FNPTunion connections available. Sizes: 1/2” to 1”.

36H SeriesModel PRVH

Super capacity pressure reducing valves forheavy duty applications. Complies with ASSEand CSA standards and is listed with IAPMO.Bottom clean out plug for easy in-line servicing;NPT connection standard. Flanged connectionsavailable on 2”, 2-1/2” and 3” sizes. Strainersoptional. Sizes: 1/2” to 3”.

A127 Series

Apollo control valves are ideal for a wide rangeof commercial and industrial applications,wherever the !ow, pressure or level of liquidsneeds to be controled. Hydraulically operateddiaphragm main valve automatically controlsnon-corrosive, non-abrasive !uids by means ofa wide range of pilots.

WATER PRESSURE REDUCING VALVES

34A-34H Model MVA-MVH Series

Thermostatic Mixing Valves. 34A Series ASSE1017 certi#ed Point of Source mixing valves aredesigned for hot water distribution systems; 34HSeries are designed for radiant heat applications,to provide better control of hot water supply.Numbered indicator control allows easy setupand #ngertip control. Available in low or hightemperature range options depending on ap-plication. Integrated check valves and strainersprovide added protection against cross !ow &foreign particles. Thermostat over temperature

protection.

34B Series Model MVB

Scald Protection Mixing Valves. 34B SeriesASSE 1070 certi#ed Point of Use mixing valves aredesigned to be used for single or multiple #xturesrequiring !ow rates as high as 17 GPM. Thesevalves use a thermostatic element that sensesoutlet temperature and will compensate for !uc-tuating inlet temperature and pressure. Themixed water temperature range is 85°-120°F andwill hold a desired temperature within ±3°F at alltimes. The 34B also has an adjustable tempera-ture limit stop to prevent the valve from being set

above 120°F.

MIXING VALVES

34C Series Model MVC Series

Commercial High-Capacity Mixing Valves.34C Series ASSE 1017 listed, high-capacitymixing valves are thermostatically controlledregulating valves designed for use in largecommercial potable and non-potable hot watersystems. Simple adjustment of watertemperature from 90°-140°F or 130°-180°F.

34D Series Model MVD Series

“Point of Use” Mini-Mixer Thermostatic Valves.34D ASSE 1016 and 1070 certi#ed mixing valvesare designed to throttle both the hot and coldwater inlet supplies to compensate for tempera-ture and pressure !uctuations. The mixed watertemperature range is 85°-120°F and will hold adesired temperature within ±2°F at all times. The34D has built in check valves, thermal actuatorprotection and an adjustable temperature limtstop to prevent the valve from exceeding 120°.Available with cold water by-pass option.

34E Series Model MVE

Apollo 34E emergency mixing valves aredesigned to control the cold and hot watertemperature to deliver tepid water at apredetermined temperature to emergencyeyewash/face wash #xtures. The 34E providesprecise temperature and !ow control in theevent of cold water, hot water, and thermostaticelement failures. Made in the USA.

14

MIXING VALVES, SAFETY & RELIEF VALVES

customer service (704) 841-6000

34HLModel MVHL Series

Multiple-Fixture Hi-Lo Mixing Valve.Fully ASSE 1069 and 1017 compliant,the 34HL Series protects against scald-ing and thermal shock by providing±5° output temperature control formultiple #xtures in commercial and in-stitutional settings. Patented designeliminates “dead-zones.” Made in USA.

10-100,200,300,400Model RVW10 Series

Brass/bronze safety relief valves protect ASMESection IV hot water heating boilers and hydronicheating systems. High-capacity design featurescorrosion resistant construction. Brass, satin orpolished chrome #nishes available. Set pressures20-80 psig @250°F. Sizes 3/4” male and femaleinlet connections.

SAFETY RELIEF VALVES10-512,322

Model RVS/RVW Series

Compact ASME Section VIII steam service safetyvalves feature stainless steel springs andelastomer soft seating for dependable operation.Standard equipment on steam sterilizers, cookersand kettles. Brass, satin or polished chrome#nishes. 1/2” model available with stainless steelwetted trim. Set pressures to 60 psig @ 312°F.Sizes 1/2” and 3/4”.

10-600 Model RVW60 Series

Heavy-duty bronze safety relief valves protectASME Section IV hot water heating boilers andhydronic heating systems. High-capacity designfeatures corrosion-resistant construction,isolating diaphragm and elastomer soft seats. Setpressures 15 to 160 psig @ 250°F. Available withstandard or expanded outlet, sizes 3/4” -2”.

12 SeriesModel RVS12 Series

Medium capacity safety valves protect ASMESection IV low pressure steam heating boilers.Cast bronze, full nozzle design features PTFEfaced elastomer soft seating for dependableoperation. Set pressures 5 to 15 psig @ 250°F.Sizes 2”, 2-1/2” and 3”. ASME Section IV certi#ed;15 psi only.

14-200 Model RVS14 Series

High-capacity safety valves for ASME Section IVlow pressure steam heating boilers. One piececast bronze body features top guided design,chrome-plated seat and PTFE-faced soft seat.Optional test gag available permits hydrostatictesting. Set pressures 5 to 15 psig @ 250°F. Sizes2”, 2-1/2” and 3”. ASME Section IV certi#ed 15 psionly.

14-400 Model RVA14 Series

High volume air relief valves designed for lowpressure non-code air and gas service. Ruggedbronze construction features elastomer softseating and Te!on coated discs for dependableoperation. Used to protect low pressurecompressors and tanks, high-volume blowers,and pneumatic conveying systems. Pressuresettings from 4 to 22 psig @ 400°F. Sizes 2”, 2-1/2”and 3”.

34-200 Series

Apollo 34-200 Thermostatic mixing valveprovies non-ASSE extension of water heatercapacity and hot water temperature control inhydronic heating systems. Available in low orhigh temperature options for !oor or baseboardapplications. Made in the USA.

15

SAFETY & RELIEF VALVES

www.apollovalves.com

14-600Model RVV14 Series

High-volume vacuum relief valves feature onepiece cast bronze bodies, Te!on coated discs andelastomer soft seating to provide accurate anddependable operation. Relief settings from 8 to30” Hg @ 400°F. Sizes 2”, 2-1/2”, and 3”.

15 SeriesModel RVA15 Series

OEM style brass barstock safety valves for air andgas service. ASME Section VIII certi#ed. Used toprotect air compressors, receivers, andinstrument air systems. Stainless steel springsand viton soft seating provide superior seattightness and vibration resistance. Set pressuresto 250 psig @325°F. Sizes 1/4”, 3/8”, 1/2”, 3/4” and1”.

16 SeriesModel RVG16 Series

Economical relief valves for general purposenon-code overpressure protection and bypassrelief applications. Applications include liquidbypass or thermal expansion relief of well pumps,tanks, #re protection systems and all types ofwater or liquid piping systems. Bronze bodies,stainless steel springs and soft seating. Standardpressure settings from 50-175 psi. Sizes 1/2” and3/4”.

16-501Model RVS14 Series

Adjustable relief valves protect equipment byproviding low volume liquid relief or bypasscontrol. Excess volume may be discharged backto the low pressure source. Ideal for agriculturalsprayers and simple commercial or industrialpressurized systems. Adjustable 50-250 psi or250-600 psi. Size 1/2”. Seats: Nitrile or PTFE,

16-503,504Model RVG16C Series

Calibrated pressure relief valve allows for inlinepressure adjustments without the need forpressure gauge. Provides static overpressureprotection for liquid #lled systems such as wellpumps, tanks, and #re protection systems. Presetat 100 psig. Adjustable in 25 psig incrementsfrom 50 to 175 psig. Bronze body, inlet sizes1/2”-3/4”. Outlet size: 1/2”.

17 Series Model RVW17 Series

Bronze pressure-only relief valves protectplumbing systems, storage tanks and tanklesscoil water heaters from excessive pressure. CSAcerti#ed design conforms to HUD/FHArequirements. 3/4” model is ASME Section IVcerti#ed from 75-150 psig. Stainless steel springsand elastomer soft seats are standard. Setpressures to 160 psig @ 250°F. Sizes 1/2” and 3/4”.

18C-400 Model TPR Series

Residential T&P relief valves protect hot waterheaters from excessive pressure andtemperatures. CSA certi#ed design conforms toHUD/FHA requirements. 3/4” model is ASMESection IV certi#ed at 125 and 150 psig settings.Choice of element lengths. Available withextended body length to suit water heaters withextra thick insulation. Set pressures 125 or 150psig @ 210°F. Sizes 1/2” and 3/4”.

18C-500 Model TPC Series

High-capacity commercial T&P relief valvesprotect hot water heaters from excessivepressure and temperatures. CSA certi#eddesign conforms to ASME Section IV and ANSIZ21.22 requirements. Corrosion resistant allbronze body, isolating diaphragm and screw-incage that eliminates rusting steel screws. SSsprings and thermostats. Choice of elementlengths. Set pressures 125 or 150 psig @ 210°F.Sizes 3/4” through 2”.

19 Series

Bronze high capacity safety valves for steam orair/gas service. ASME Section I and VIII certi#ed.Protects steam boilers, pressure vessels andpressure piping systems. Standard featuresinclude stainless steel springs, tapped drainconnections and Te!on soft seat for superiorperformance. Metal to metal seating andstainless steel trim options available. Setpressures to 300 psig @ 422°F. Sizes 1/2”through 2-1/2”.

16

SAFETY RELIEF VALVES (cont’d)

SAFETY & RELIEF VALVES, Y STRAINERS

customer service (704) 841-6000

37 Series Model VRV Series

Brass or bronze vacuum relief valves. Maxtemperrature: 250°F, max. wather pressure: 200psig. CSA certi#ed. Sizes 1/2” and 3/4”.

29 Series

Compact OEM-style bronze safety valves forsteam, air/non-hazardous gas service. ASMESection I and VIII certi#ed for use on steamboilers, sterilizers, pressure vessels and cookers.Standard features include stainless steelsprings, tapped drain connections andpatented Te!on soft seat for superior seattightness. Optional stainless steel wetted trim.Set pressures to 200 psig @ 406°F. Sizes 3/8”through 1-1/4”.

119 Series

High capacity cast iron !anged safety valvesfor steam or air/gas service. ASME Section Iand VIII certi#ed. Used to protect steamboilers, pressure vessels and pressure pipingsystems. Rugged top-guided design features!at lapped metal seating and two controlrings for repeatable performance andextended service life. Stainless steel wettedtrim standard.

DPE Series

Cast iron drip pan elbows connect to thedischarge outlet of steam service safety valvesto safely direct the steam discharge andcondensated away from the valve. Isolates thevalve from piping stresses which can adverselya$ect valve performance. Sizes 3/4” through 8”,threaded and !anged connections.

510/520 Series

High performance bronze safety relief valvesare ASME Section VIII certi#ed for steam,air/gas and liquid service. Ruggedtop-guided full nozzle design features !atlapped metal seating, self aligning disc insertand a lower control ring for exceptionalperformance and durability. Available with achoice of brass or stainless steel trim. Widerange of options includes elastomer O-ring orPCTFE soft seating and cryogenicpreparation. Set pressures to 1200 psig @422°F. Sizes 1/2” through 2”.

530/540 Series

High performance industrial safety reliefvalves feature carbon steel or all stainlesssteel construction. ASME Section VIII certi#edfor steam, air/gas and lizuid service. Ruggedtop-guided full nozzle design features !atlapped metal seating, self aligning disc insertand a lower control ring for exceptionalperformance and durability. Wide range ofoptions include elastomer O-ring, metal tometal, PCTFE and cryogenic preparation. Setpressures to 1200 psig @ 800°F. Sizes 1/2”

through 2”.

35 Series Model FWR Series

Bronze feed water pressure regulators; individually set at 15 psig; adjusts from 10 to 25psig; fast #ll feature; high capacity, screw in bon-net and in-line stainless steel strainer. 210°F max. temperature, max. pressure: 100 psig, 1/2” unionthreaded , threaded or solder union connections.

Y STRAINERS

59 SeriesModel YSB

Cast bronze body with 304 stainless steel screen;400 WOG/CWP psig rating; wide variety of meshscreens available. Optional blow-out plugtapping. Sizes: 1/8” to 4”. UL listed available onsizes 1/8”-1/2”.

59-300 SeriesModel YSBS

Compact corrosion resistant bronze solder endY-strainers with stainless steel screens. Generoussocket wall thickness assures high strengthsolder joints. Pressures to 400 WOG/CWP psig.Sizes: 1/2” to 2”.

17

Y STRAINERS, WATER GAUGES

www.apollovalves.com

59-V SeriesModel MSB

Ideal for OEM applications where space is apremium. Corrosion resistant body and cleanoutcap with standard 50 mesh stainless steel screen.Other screen sizes available. Rated 400 psig at210°F WOG/CWP and 125 psig at 350°F WSP.Sizes: 1/4” NPT.

Model YSS Series

Cast CF8M stainless steel body with 304 stainlesssteel screen. Rated at 600 psig for 1124°F steamand 1440 psig for WOG/CWP. Screen cover is NPTtapped for blow-o$ connection. Sizes 1/2”-1”.

Model 125YF

Flanged ductile iron bodies with 304 stainlesssteel screens. Sizes from 2” to 16” and pressureratings to 150 psig. Screen cover has a tappedand plugged blow-o$ connection.

Model YCS Series

FNPT cast carbon steel body with 304 stainlesssteel screen. Rated at 600 psig at 839°F steamand 1480 psig at 100°F WOG/CWP. Screen coveris NPT tapped for blow-o$ connection.

Model YCT Series

Class 250 FNPT cast iron body with 304 stainlesssteel screen. Rated 250 psig at 406°F steam and400 psig at 150°F WOG/CWP. Screen cover isNPT tapped for blow-o$ connection.

APOLLO INTERNATIONAL STRAINERS

20 SeriesModel WG Series

Rough bronze water gauges; aluminum orcomposition wheel, needle drain valve inlower arm, ball checks (optional) preventoperator scalding in case of glass breakage.Chain lever and expansion tank modelsavailable. Sizes: 3/8”, 1/2”, and 3/4”.

21 SeriesModel WG Series

Rough bronze water gauges; withextended shank; 1-3/4” shank length;aluminum or composition handle. For 1/2”pipe size.

23 SeriesModel WG3S, WG6S

Stainless steel direct reading water gauges.Max. working pressure: 500 psig (subject tolimitation of gauge glass), aluminum orcomposition wheel, stainless steel ball valvedrain in lower arm. Non-automatic,automatic, ASME automatic and expansiontank models. Sizes: 1/2” and 3/4”.

WATER GAUGES

18

Y STRAINERS (cont’d)

WATER GAUGES, BOILER DRAINS, STEAM, AIR & GAS COCKS

customer service (704) 841-6000

24 SeriesModel WG239, WG35

Rough bronze direct reading water gauges.ASME automatic or non-automatic modelsavailable; also available with chain lever;ball valve drain. Sizes: 1/2” and 3/4”.

25 SeriesModel WG2P, WG3P,

WG3SP

Polished bronze and chrome plated watergauges. Aluminum or composition wheel,needle drain valve in lower arm,non-automatic and automatic models,chain lever available. Sizes: 3/8” to 3/4”.

31 Series Model DV/WHDV

Rough bronze drain valves for water heaters orheating boilers. Pressure rated to 200 psig.Shank lengths 5/8” to 3-1/2”. Pipe sizes: 1/2” and3/4”.

BOILER DRAINS

Air and GAS COCKS

41 Series Model AC

Polished and satin brass air cocks with “tee”handle or lever handle. Spring and nut bottomwith a wide range of connections available.

94 MBV Series

Mini ball valve. Competitive, conventional portvalves, constructed of heavy-duty forged brass,with 100% Te!on seats and gland follower withdouble Viton o-rings to prevent stem leakage.Reversible handle for tight space applications.CSA 1/2 psig and ASME 2 and 5 psig gas ratings.Rated to 600 psig at 100°F. Operatingtemperatures from -40°F to 300°F. Sizes: 1/8” and1/4”.

54 Series Model GCA

Gas hose-end shut-o$ valves. 1/8” NPT orstandard tube sizes. Capacity: 56,500 Btu/hour.Pipe sizes: 3/8” to 3/4”.

19

AIR & GAS COCKS, CHECK VALVES

www.apollovalves.com

GB-50 Model GBVB Series

UL and CSA design-certi#ed manual gas shut-o$ball valves for many fuel types for up to 5 psig.Standard female threaded connections.Available with single or dual tapped gas ports.Sizes: 1/2” to 2”.

61,62 SeriesModel CVS, CVB

Ball cone check valves in bronze (to 3”) and 316stainless steel (to 2”). Reinforced PTFE ball conecheck provides excellent chemical and corrosionresistance and requires no radial alignment.Standard connection for bronze is FNPT (to 3”),male x female (to 2”). For stainless steel, FNPTonly.

61-500/62-500 SeriesModel CVBE, CVSE

Bronze check valves with standard EPR oroptional Nitrile seat for bubble tight shut o$ to2”. Stainless steel check valves with !uorocarbonseat to 1”. Optional 5 and 10 psig crackingpressure through size 1”. Standard connectionfor bronze is FNPT, bronze sweat connectionavailable to 1”, for stainless steel FNPT only.

61-700 SeriesModel CV

Ideally suited for all OEM applications wherespace is a premium. Excellent for use on waterand air. They feature a bubble tight soft seatdesign with a very light loaded stainless steelspring.

Check Valves

80/81 Series

Bronze ball valve for LP gas, natural gas,!ammable liquids and heated oil. Adjustablepacking gland, UL listed. Sizes 1/4” to 3”.

77G-UL Series

77G-UL Series ball valve is a UL and CSA listedfuel shut o$ valve approved for a variety of!ammable gasses and liquids. Bronze body,premium multi-#ll MPTFE seats and stempacking. “Solid Ball” design for true full port!ow.

56 Series Model GCP

Pilot gas cocks. 1/2 psig for 32°F to 125°Fservice. CSA design certi#ed. 1/8” MNPT xvarious 1/4” tube connections.

GB-15, GB-16 Model GBVU, GBVA

These international gas appliance ball valves aredesigned for natural gas, manufactured andmixed gas, lique#ed petroleum gasses and LPgas-air mixture applications. They comply withthe latest editions of ANSI, CSA, and ULpublished standards.

GB-10 Model GBV Series

CSA design-certi#ed manual shut-o$ ball valvesfor many fuel types for up to 5 psig. Capacities:300,000 to 1.1 million BTu/hour. Standardfemale x female threaded connection. Sizes:3/8” to 1”.

20

Air and GAS COCKS (cont’d)

SPECIALTY VALVES

customer service (704) 841-6000

SPECIALTY VALVES

35-FC Series Model FCV Series

Bronze body !ow check provides positive gravityshut-o$ in hydronic systems. Convenientoverride permits continuous circulation ordrainage when required. Available with NPT orsweat connections, NPT models are both angleand horizontal checks. Expansion tank may beinstalled on the angle check. Maximumtemperature is 250°F. Max. pressure is 125 psig.

78-600 Series Model PBS

Purge, balance and shut-o$ valve, hassolid brass “can’t lose” cap and chain.Hose thread connection for blow o$ andeasy purging, maximum temperature:250°F, maximum pressure: 600 psigWOG/CWP in open position.

58 Series Model HCB

Balancing valves for hydronic !ow control; 150psig rating. Copper tube sizes: 1/2” and 3/4”.

78-RV SeriesModel EXV

Water heater shuto$/thermal expansion controlvalves provide both water heater shuto$ andcode required thermal expansion protection. The78-RV combination valves are o$ered in threepressure settings, 125, 100 and 80 psig. Availablein 3/4” size with sweat, threaded and pexconnections. Various relief valve connectionsavailable. CSA and IAPMO listed.

21

23

NOTES

E-Mail Address Phone Fax

Spirit Group Florida (except Pan Handle) info@spiritgroupinc.com 407-291-6035 407-299-0378

Spotswood Associates Georgia/Alabama dlewis@spotswoodassociates.com 770-447-1227 770-263-6899

Pro Marketing, Inc. North Carolina/South Carolina/Tennessee-East sales@promarketinginc.net 864-578-4334 864-578-4889

Mid South Marketing, Inc. Virginia/Maryland/Washington, D.C./WV-East midsouth7@aol.com 804-213-3801 804-213-3802

Southern Marketing Group MS/TN-West/AR/Bowie Cty.-TX SMG49@bellsouth.net 901-547-0042 901-547-0035

AVC Mechanical Sales, Inc. Oklahoma (Plmb & Ind’l)/Texas-North (All) valvesales@avalve.com 214-201-0100 214-201-0104

Armstrong/Weatherly Associates Texas-South/Louisiana sales@armstrong-weatherly.com 713-692-5566 713-692-6021

Lightsey Marketing Oklahoma (Irrigation, Fire Protection, Water Works) karenandmarilynn@yahoo.com 918-251-2828 918-251-7742

New Tech Marketing IL/WI-East/IN-North/MI-Upper Peninsula/IA-/River Counties sales@new-techmarketing.com 630-378-4300 630-378-0343

New Tech Marketing Eastern Missouri/Southern Illinois/Kansas City ntm112@aol.com 618-394-0329 618-394-0427

Whitfill-McCarthy, LLC Kentucky/Indiana-South/Ohio-South whitfill@win.net 502-459-4545 502-459-9944

V.E. Sales Co., Inc. Michigan (Except Upper Peninsula) tomv@vesalesinc.com 586-774-7760 586-774-1490

Formation Sales Minnesota/North & South Dakota/Wisconsin-West dean@formationsales.com 763-262-4700 763-262-4740

Marshall-Rodeno Heartland Nebraska/Iowa (Except River Counties) trodeno@marshallrodeno.com 303-575-6701 303-575-6706

Midwest Spec Ohio-North/Pennsylvania-West/West Virginia-West glsales@mwspec.com 330-538-0406 330-538-0410

Warren Thoma Associates MI/WI/IL/IN/KY/OH (Irrigation Only pennyt@thomaassociates.com 815-477-1814 815-477-2009

Spec Management Group California-South (Irrigation), Hawaii (All Products) msmarch4@cox.net 949-481-4225 949-487-0990

Specified Process Equipment Co. California - North jd@specifiedprocess.com 707-747-3466 707-747-4957

Marshall-Rodeno Associated CO/WY/MT/ID-SE/UT/NV-NE/NM/El Paso-TX trodeno@marshallrodeno.com 303-575-6701 303-575-6706

Suntoya Corporation WA, OR, AK, Northern counties ID kim@suntoya.com 509-534-1516 509-535-6546

Southwestern Industrial Sales Co. Arizona/Nevada-SW eduardop@sw-ind.com 480-458-5838 480-458-5843

Jack Prust Sales California-North (Irrigation) jack@jpsales.com 530-878-2922 530-878-2341

Active Sales Northwest, Inc Oregon, WA, Western Idaho (Irrigation) skactive@aol.com 541-726-0320 541-726-1148

Urell, Inc. Massachusetts/New England States conbraco@urell.com 617-923-9500 617-926-9414

Conroy & Griese Sales, Inc. New York-East/New Jersey-North iezzi52@aol.com 856-663-4440 856-663-6644

Layden Company PA-East/DE/NJ-South/NY-Upstate & West joejr@laydencompany.com 610-363-6657 877-529-3361

Keith Engle & Associates OEM accounts keith.engle@verizon.net 610-827-9560 610-827-9561

Waterlines, Inc. New England/Upstate, Metro NY/PA/VA (Irrigation Only) waterlines@nac.net 973-209-7777 973-209-7421

Conbraco Industries, Canada 178 Pennsylvania Ave., Unit 1, Concord, Ontario L4K 4B1 conbraco.canada@conbraco.com 905-761-6161 905-761-6666

Barclay Sales Ltd. British Columbia bbarclay@barclaysales.com 604-945-1010 604-945-3030

D & M Mechanical Sales Ontario/East don@dandmsales.ca 613-384-7084 613-384-3407

Dynamic Agencies, Ltd. Saskatchewan doug.dynamicage@sasktel.net 306-343-1901 306-343-1901

Tom Beggs Agencies Ltd. Manitoba/NW Ontario tba@mts.net 204-953-1900 204-774-6915

Task Controls, Inc. Ontario infotoronto@taskcontrols.com 416-291-3004 416-754-3481

Agences J. Pierre Sylvain, Inc. Quebec agencespsylvain@golden.net 450-655-9588 450-641-2737

Kern Industries, Ltd. Alberta-North kernind@telusplanet.net 780-451-2056 780-454-6687

Kern Industries Calgary, Ltd. Alberta-South marty.yucytus@kernindustries.ca 403-730-7791 403-239-8179

J. Levandier Sales, Inc. Nova Scotia, New Brunswick, Prince Edward Island and

Newfoundland service@jlevandiersales.com 506-858-1615 506-858-1084

Key to the North Sales Agency, Inc. Ontario-North hmehes@keytothenorth.ca 705-524-6714 705-566-0148

Sadek Trading Middle East (except Israel) ysadek@aol.com 704-618-6613 980-233-8437

Conbraco International Sales: Mexico jose.arias@conbraco.com 956-631-4542 956-631-4681

Caribbean luis.guzman@conbraco.com 787-739-5620

Central & South America jr.jefferson@conbraco.com 832-220-3783

Asia Pacific jonathan.yap@conbraco.com 65-9626-9241 65-6753-0131

Europe allen.bellamy@conbraco.com 44-161-212-3745 44-161-212-3747

Africa/Australia/Israel/India donna.bult@conbraco.com 954-252-9781 954-252-8698

Regional Sales Managers:

Brian Blalock (East) brian.blalock@conbraco.com 704-624-3744 704-841-6021

Steve Brown (Northwest) steve.brown@conbraco.com 425-985-5095 253-862-3548

Skip Wilson (West) skip.wilson@conbraco.com 760-330-3293 775-854-5722

Sanford Pauly (North Central) sanford.pauly@conbraco.com 513-716-7772 513-321-7717

Ron Fortner (South Central) ron.fortner@conbraco.com 713-203-9207 281-464-3736

E-Mail Address Phone Fax

Spirit Group Florida (except Pan Handle) info@spiritgroupinc.com 407-291-6035 407-299-0378

Spotswood Associates Georgia/Alabama dlewis@spotswoodassociates.com 770-447-1227 770-263-6899

Pro Marketing, Inc. North Carolina/South Carolina/Tennessee-East sales@promarketinginc.net 864-578-4334 864-578-4889

Mid South Marketing, Inc. Virginia/Maryland/Washington, D.C./WV-East midsouth7@aol.com 804-213-3801 804-213-3802

Southern Marketing Group MS/TN-West/AR/Bowie Cty.-TX SMG49@bellsouth.net 901-547-0042 901-547-0035

AVC Mechanical Sales, Inc. Oklahoma (Plmb & Ind’l)/Texas-North (All) valvesales@avalve.com 214-201-0100 214-201-0104

Armstrong/Weatherly Associates Texas-South/Louisiana sales@armstrong-weatherly.com 713-692-5566 713-692-6021

Lightsey Marketing Oklahoma (Irrigation, Fire Protection, Water Works) karenandmarilynn@yahoo.com 918-251-2828 918-251-7742

New Tech Marketing IL/WI-East/IN-North/MI-Upper Peninsula/IA-/River Counties sales@new-techmarketing.com 630-378-4300 630-378-0343

New Tech Marketing Eastern Missouri/Southern Illinois/Kansas City ntm112@aol.com 618-394-0329 618-394-0427

Whitfill-McCarthy, LLC Kentucky/Indiana-South/Ohio-South whitfill@win.net 502-459-4545 502-459-9944

V.E. Sales Co., Inc. Michigan (Except Upper Peninsula) tomv@vesalesinc.com 586-774-7760 586-774-1490

Formation Sales Minnesota/North & South Dakota/Wisconsin-West dean@formationsales.com 763-262-4700 763-262-4740

Marshall-Rodeno Heartland Nebraska/Iowa (Except River Counties) trodeno@marshallrodeno.com 303-575-6701 303-575-6706

Midwest Spec Ohio-North/Pennsylvania-West/West Virginia-West glsales@mwspec.com 330-538-0406 330-538-0410

Warren Thoma Associates MI/WI/IL/IN/KY/OH (Irrigation Only pennyt@thomaassociates.com 815-477-1814 815-477-2009

Spec Management Group California-South (Irrigation), Hawaii (All Products) msmarch4@cox.net 949-481-4225 949-487-0990

Specified Process Equipment Co. California - North jd@specifiedprocess.com 707-747-3466 707-747-4957

Marshall-Rodeno Associated CO/WY/MT/ID-SE/UT/NV-NE/NM/El Paso-TX trodeno@marshallrodeno.com 303-575-6701 303-575-6706

Suntoya Corporation WA, OR, AK, Northern counties ID kim@suntoya.com 509-534-1516 509-535-6546

Southwestern Industrial Sales Co. Arizona/Nevada-SW eduardop@sw-ind.com 480-458-5838 480-458-5843

Jack Prust Sales California-North (Irrigation) jack@jpsales.com 530-878-2922 530-878-2341

Active Sales Northwest, Inc Oregon, WA, Western Idaho (Irrigation) skactive@aol.com 541-726-0320 541-726-1148

Urell, Inc. Massachusetts/New England States conbraco@urell.com 617-923-9500 617-926-9414

Conroy & Griese Sales, Inc. New York-East/New Jersey-North iezzi52@aol.com 856-663-4440 856-663-6644

Layden Company PA-East/DE/NJ-South/NY-Upstate & West joejr@laydencompany.com 610-363-6657 877-529-3361

Keith Engle & Associates OEM accounts keith.engle@verizon.net 610-827-9560 610-827-9561

Waterlines, Inc. New England/Upstate, Metro NY/PA/VA (Irrigation Only) waterlines@nac.net 973-209-7777 973-209-7421

Conbraco Industries, Canada 178 Pennsylvania Ave., Unit 1, Concord, Ontario L4K 4B1 conbraco.canada@conbraco.com 905-761-6161 905-761-6666

Barclay Sales Ltd. British Columbia bbarclay@barclaysales.com 604-945-1010 604-945-3030

D & M Mechanical Sales Ontario/East don@dandmsales.ca 613-384-7084 613-384-3407

Dynamic Agencies, Ltd. Saskatchewan doug.dynamicage@sasktel.net 306-343-1901 306-343-1901

Tom Beggs Agencies Ltd. Manitoba/NW Ontario tba@mts.net 204-953-1900 204-774-6915

Task Controls, Inc. Ontario infotoronto@taskcontrols.com 416-291-3004 416-754-3481

Agences J. Pierre Sylvain, Inc. Quebec agencespsylvain@golden.net 450-655-9588 450-641-2737

Kern Industries, Ltd. Alberta-North kernind@telusplanet.net 780-451-2056 780-454-6687

Kern Industries Calgary, Ltd. Alberta-South marty.yucytus@kernindustries.ca 403-730-7791 403-239-8179

J. Levandier Sales, Inc. Nova Scotia, New Brunswick, Prince Edward Island and

Newfoundland service@jlevandiersales.com 506-858-1615 506-858-1084

Key to the North Sales Agency, Inc. Ontario-North hmehes@keytothenorth.ca 705-524-6714 705-566-0148

Sadek Trading Middle East (except Israel) ysadek@aol.com 704-618-6613 980-233-8437

Conbraco International Sales: Mexico jose.arias@conbraco.com 956-631-4542 956-631-4681

Caribbean luis.guzman@conbraco.com 787-739-5620

Central & South America jr.jefferson@conbraco.com 832-220-3783

Asia Pacific jonathan.yap@conbraco.com 65-9626-9241 65-6753-0131

Europe allen.bellamy@conbraco.com 44-161-212-3745 44-161-212-3747

Africa/Australia/Israel/India donna.bult@conbraco.com 954-252-9781 954-252-8698

Regional Sales Managers:

Brian Blalock (East) brian.blalock@conbraco.com 704-624-3744 704-841-6021

Steve Brown (Northwest) steve.brown@conbraco.com 425-985-5095 253-862-3548

Skip Wilson (West) skip.wilson@conbraco.com 760-330-3293 775-854-5722

Sanford Pauly (North Central) sanford.pauly@conbraco.com 513-716-7772 513-321-7717

Ron Fortner (South Central) ron.fortner@conbraco.com 713-203-9207 281-464-3736

So

uth

ea

stR

eg

ion

Mid

we

ste

rn R

eg

ion

We

ste

rn R

eg

ion

No

rth

ea

st

Re

gio

nSo

uthe

rnR

egio

nC

an

ad

aIn

t’l.

CICA9000 9/10 DKG 5M