api 6d gate valves catalogue · easy to work with, extremely responsive, and quick to solve any...

API 6D GATE VALVES CATALOGUE22806 COMMERCIAL LANE TOMBALL, TEXAS 77375

WWW.EPITEXAS.COM EZ-API6D-08-17

EPI VALVES TEXAS, LLC

A COMPANY SNAPSHOT

EPI Valves Texas was incorporated in the State of Texas, July 2011. We have been steadily increasing our business and customer base each year since. Our aim is to be easy to work with, extremely responsive, and quick to solve any issue with any facet of the business.

We implemented an API Q1 compliant quality management system in early 2014 andsince received our API 6D Certificate in January 2015. We constantly monitor our keyperformance indicators regarding on-time delivery, scrap rates, rework, and customersatisfaction. Our current customer satisfaction rate is 100%. This number is based oncustomer surveys sent with each order we ship.

Our customer base also has steadily increased since 2011. We like to believe it is due inpart because we here at EPI Valves do the little things that other manufacturers’ won’t.

EPI Valves Texas, LLC22806 Commercial LaneTomball, Texas 77375

¾ We mark the seat dimensions on the valve body for quick referencing and easy recognition.¾ We test each and every valve that comes into our facility.¾ We welcome third-party or customer witnesses. ¾ We provide a complete quality document package with test reports and test charts at no

additional charge. ¾ We perform complete dimensional “As Built,” drawings..¾ We follow up with each customer and order with a customer satisfaction survey.

EPI Valves Texas values your business and will work diligently and responsively to satisfy requirements.

Sincerely,

Bill Godare Managing Member EPI Valves Texas, LLC

22806 COMMERCIAL LANE TOMBALL, TEXAS 77375 WWW.EPITEXAS.COM

E-Z SEAL EXPANDING GATE VALVES OPERATING PRINCIPLE . . . . . . . . . . . . . . . . . . . . . . . . . . PAGE 1

E-Z SEAL SLAB GATE VALVES OPERATING PRINCIPLE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PAGE 7

E-Z SEAL EXPANDING GATE VALVE TRIM CHART . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .PAGE 2

E-Z SEAL SLAB GATE VALVE TRIM CHART . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .PAGE 8

E-Z SEAL EXPANDING GATE VALVE WEIGHTS & DIMENSIONS (CLASS 300) . . . . . . . . . . . . . PAGE 3E-Z SEAL EXPANDING GATE VALVE WEIGHTS & DIMENSIONS (CLASS 600) . . . . . . . . . . . . . PAGE 4E-Z SEAL EXPANDING GATE VALVE WEIGHTS & DIMENSIONS (CLASS 900) . . . . . . . . . . . . . PAGE 5E-Z SEAL EXPANDING GATE VALVE WEIGHTS & DIMENSIONS (CLASS 1500) . . . . . . . . . . . . PAGE 6

E-Z SEAL SLAB GATE VALVE WEIGHTS & DIMENSIONS (CLASS 150) . . . . . . . . . . . . . . . . . . . PAGE 9

TABLE OF CONTENTS

E-Z SEAL SLAB GATE VALVE WEIGHTS & DIMENSIONS (CLASS 300) . . . . . . . . . . . . . . . . . . . PAGE 10E-Z SEAL SLAB GATE VALVE WEIGHTS & DIMENSIONS (CLASS 600) . . . . . . . . . . . . . . . . . . . PAGE 11E-Z SEAL SLAB GATE VALVE WEIGHTS & DIMENSIONS (CLASS 900) . . . . . . . . . . . . . . . . . . . PAGE 12E-Z SEAL SLAB GATE VALVE WEIGHTS & DIMENSIONS (CLASS 1500) . . . . . . . . . . . . . . . . . . PAGE 13

22806 COMMERCIAL LANE TOMBALL, TEXAS 77375 WWW.EPITEXAS.COM

1 During open and closing travel, the gate and segmentassembly is collapsed with both back angle surfaces incontact. The centralizer mechanism prevents relativemovement between the gate and segment allowing thegate and segment assembly to travel freely withoutsticking or wedging.

OPERATING PRINCIPLE

1 API 6D Gate Valves

The E-Z SEAL Expanding Gate Valve design is the premiere choice when a full port, through-conduit,mechanically sealing gate valve is required. For geothermal applications, this valve provides a mechanicallyset seat second to none. The optional EPI GeoShield protective coating not only protects the seat and gatesealing surfaces, but the entire surface area of both the gate and seat sets. While at the same time providing atruly affordable alternative to Stellite hard-facing. The EPI GeoShield protection also affords lubricity andreduces operating torques.

2 Traveling to the final open position the lower backangles are in contact with each other. With furtherupward movement of the gate with the segmentstopped, the centralizer mechanism allows the gateand segment assembly to expand, sealing against bothseats, protecting the seat faces, while isolating thebody cavity from the flow bore.

HOW THE E-Z SEAL EXPANDING GATE VALVE WORKS

3 Traveling to the final closed position, the upper backangles of the gate and segment move into contact witheach other. With further downward movement of thegate while the segment is stopped, the centralizermechanism allow the gate and segment assembly toexpand, sealing against both seats, forming a tightmechanical seal.

E-Z SEAL EXPANDING GATE VALVE

TRIM CHART

COMPONENTRECOMMENDED

SPARE PARTS

E21 TRIMSTANDARD SERVICE

OPERATING TEMP. 250°F MAX.

BODY ASTM A216 WCC

BODY DRAIN PLUG 1215 STEEL Zn

GATE ** ASTM A216 WCC + ENP or EQ

SEGMENT ASTM A216 WCC + ENP or EQ

SEATS ** A105 + ENP or EQ

SEAT SEGMENT SKIRTS A36 + ENP or EQ

SEAT INSERTS ** DEVLON or RPTFE

SEAT O-RINGS VITON

BONNET ASTM A216 WCC or ENP

BONNET GASKET ** VITON

SEAT SEALANT FITTINGS ** 1215 STEEL Zn

STEM ** 17-4PH SS

YOKE ** AISI 1020 STEEL or EQ

STEM NUT ** ALUMINUM BRONZE

STEM PACKING ** DUCK IMPREGNATED FLUOROELASTOMER

GLAND CARBON STEEL

PACKING FITTING ** 1215 STEEL Zn

BODY VENT FITTING ** 1215 STEEL Zn

STUDS ASTM A193 Gr.B7

NUTS ASTM A194 Gr.2H

HANDWHEEL CAST IRON

STEM PROTECTOR CLEAR PLASTIC / STEEL

HEX SCREWS ASTM 1045

LEVER LOCK ARMS CARBON STEEL + ENP

LEVER LOCK ARM PINS ASTM A276-410 SS OR EQ

CYLINDRICAL PIN CARBON STEEL

ORIENTATION BLOCK CARBON STEEL + ENP or EQ

LIMIT PAD ASTM A216 WCC or EQ

NACE Compliant - National Association of Corrosion Engineers, STD MR01.75

TRIM CHART & RECOMMEDED SPARE PARTS


E-Z SEAL EXPANDING GATE VALVE TRIM CHART

3 API 6D Gate Valves**Dimensions are subject to change without notice.

PRESSURECLASS

DIM.INCHES

END-TO-ENDRF / RTJ

THRUBORE

FACE PATTERNRF / RTJ

BOLT CIRCLE

DIAMETER

FLANGE DIAMETER

No. OF HOLES

DIAMETER

FLANGETHICKNESS

FLOOR-TO-CL BORE

MAX.OVERALL HEIGHT

APPROX. WEIGHT

CLASS SIZE L Ød ØD1 ØD2 ØD N – Ød b H1 H Lbs. (kg)

ANSI 300 HANDWHEEL

OPERATED

4” 12.00”/ 12.63” 3.94” 6.19”/ R-37 7.88” 10.00” 8-Ø0.866” 1.27” 7.50” 31.00” 189 (86)

6” 15.88”/ 16.50” 5.94” 8.50”/ R-45 10.63” 12.50” 12-Ø0.866” 1.46” 13.50” 42.88” 312 (142)

8” 16.50”/ 17.13” 7.94” 10.63”/ R-49 13.00” 15.00” 12-Ø0.984” 1.64” 15.75” 47.24” 561 (255)

10” 18.00”/ 18.63” 9.94” 12.75”/ R-53 15.25” 17.50” 16-Ø1.14” 1.89” 22.00” 54.72” 737 (335)

12” 19.75”/ 20.38” 11.94” 15.00”/ R-57 17.75” 20.50" 16-Ø1.26” 2.02" 23.00” 63.78” 1342 (610)

ANSI 300 BEVEL-GEAR OPERATED

4” 12.00”/ 12.63” 3.94” 6.19”/ R-37 7.88” 10.00” 8-Ø0.866” 1.27” 7.50” 31.00” 189 (86)

6” 15.88”/ 16.50” 5.94” 8.50”/ R-45 10.63” 12.50” 12-Ø0.866” 1.46” 13.50” 42.88” 312 (142)

8” 16.50”/ 17.13” 7.94” 10.63”/ R-49 13.00” 15.00” 12-Ø0.984” 1.64” 15.75” 47.24” 561 (255)

10” 18.00”/ 18.63” 9.94” 12.75”/ R-53 15.25” 17.50” 16-Ø1.14” 1.89” 22.00” 54.72” 737 (335)

12” 19.75”/ 20.38” 11.94” 15.00”/ R-57 17.75” 20.50” 16-Ø1.26” 2.02" 23.00” 63.78” 1342 (610)


14” 30.00”/ 30.63” 13.19” 16.25”/ R-62 22.00” 23.00” 20-Ø1.26” 2.14” 25.79” 63.39” 1991 (905)

16” 33.00”/ 33.63” 15.19” 18.50”/ R- 66 24.25” 25.50” 20-Ø1.38” 2.27” 28.58” 84.65” 2310 (1050)

18” 36.00”/ 36.63” 17.19” 21.00”/ R-70 27.00” 28.00” 24-Ø1.38” 2.40” 31.97” 93.58” 3696 (1680)

20” 39.00”/ 39.75” 19.19” 23.00”/ R-74 27.00” 30.50” 24-Ø1.38” 2.52” 35.39” 102.56” 3927 (1785)

24” 45.00”/ 45.88” 23.19” 27.25”/ R-78 32.00” 36.00" 24-Ø1.61” 2.77" 41.77” 118.58” 5313 (2415)

Note:All dimensions are

measured in inches. Weight is measured in lbs.

E-Z SEAL EXPANDING GATE VALVE WEIGHTS & DIMENSIONSCLASS 300

API Specification 6D


PRESSURECLASS

DIM.INCHES

END-TO-ENDRF / RTJ

THRUBORE


BOLT CIRCLE

DIAMETER

FLANGE DIAMETER

No. OF HOLES

DIAMETER

FLANGETHICKNESS

FLOOR-TO-CL BORE

MAX.OVERALL HEIGHT

APPROX. WEIGHT


ANSI 600 HANDWHEEL

OPERATED

4” 17.00”/ 17.13” 3.94” 6.19”/ R-37 8.50” 10.75” 8-Ø0.984” 1.50” 10.00” 32.00” 348 (158)

6” 22.00”/ 22.13” 5.94” 8.50”/ R-45 11.50” 14.00” 12-Ø1.14” 1.88” 12.68” 45.28” 528 (240)

8” 26.00”/ 26.13” 7.94” 10.63”/ R-49 13.75” 16.50” 12-Ø1.26” 2.19” 16.50” 47.24” 1034 (470)

10” 31.00”/ 31.13” 9.94” 12.75”/ R-53 17.00” 20.00” 16-Ø1.38” 2.50” 20.00” 54.72” 2002 (910)

12” 33.00”/ 33.13” 12.38” 15.00”/ R-57 19.25” 22.00" 20-Ø1.38” 2.63" 23.00” 63.78” 2420 (1100)


4” 17.00”/ 17.13” 3.94” 6.19”/ R-37 8.50” 10.75” 8-Ø0.984” 1.50” 10.00” 32.00” 348 (158)

6” 22.00”/ 22.13” 5.94” 8.50”/ R-45 11.50” 14.00” 12-Ø1.14” 1.88” 12.68” 45.28” 528 (240)

8” 26.00”/ 26.13” 7.94” 10.63”/ R-49 13.75” 16.50” 12-Ø1.26” 2.19” 16.50” 47.24” 1034 (470)

10” 31.00”/ 31.13” 9.94” 12.75”/ R-53 17.00” 20.00” 16-Ø1.38” 2.50” 20.00” 54.72” 2002 (910)

12” 33.00”/ 33.13” 12.38” 15.00”/ R-57 19.25” 22.00" 20-Ø1.38” 2.63" 23.00” 63.78” 2420 (1100)


14” 35.00”/ 35.13” 13.19” 16.25”/ R-61 20.75” 23.75” 20-Ø1.50” 2.75” 25.83” 72.00” 3410 (1550)

16” 39.00”/ 39.13” 15.19” 18.50”/ R- 65 23.75” 27.00” 20-Ø1.61” 3.00” 29.21” 78.15” 4389 (1995)

18” 43.00”/ 43.13” 17.19” 21.00”/ R-69 25.75” 29.25” 24-Ø1.73” 3.25” 32.60” 88.19” 6270 (2850)

20” 47.00”/ 47.25” 19.19” 23.00”/ R-73 28.50” 32.00” 24-Ø1.73” 3.50” 35.95” 98.30” 8778 (3990)

24” 55.00”/ 55.38” 23.19” 27.25”/ R-77 33.00” 37.00" 24-Ø2.00” 4.00" 42.72” 117.10” 13860 (6300)






PRESSURECLASS

DIM.INCHES

END-TO-ENDRF / RTJ

THRUBORE


BOLT CIRCLE

DIAMETER

FLANGE DIAMETER

No. OF HOLES

DIAMETER

FLANGETHICKNESS

FLOOR-TO-CL BORE

MAX.OVERALL HEIGHT

APPROX. WEIGHT


ANSI 900 HANDWHEEL

OPERATED

4” 18.00”/ 18.13” 3.94” 6.19”/ R-37 9.25” 11.50” 8-Ø1.26” 1.75” 9.00” 31.00” 416 (189)

6” 24.00”/ 24.13” 5.94” 8.50”/ R-45 12.50” 15.00” 12-Ø1.26” 2.19” 13.11” 40.00” 805 (366)

8” 29.00”/ 29.13” 7.94” 10.63”/ R-49 15.50” 18.50” 12-Ø1.26” 2.50” 16.50” 47.24” 1,386 (630)

10” 33.00”/ 33.13” 9.94” 12.75”/ R-53 18.50” 21.50” 16-Ø1.38” 2.75” 20.00” 57.17” 2420 (1100)

12” 38.00”/ 38.13” 12.38” 15.00”/ R-57 24.00” 22.00” 20-Ø1.38” 3.13" 23.82” 66.73” 3465 (1575)


4” 18.00”/ 18.13” 3.94” 6.19”/ R-37 9.25” 11.50” 8-Ø1.26” 1.75” 9.00” 31.00” 416 (189)

6” 24.00”/ 24.13” 5.94” 8.50”/ R-45 12.50” 15.00” 12-Ø1.26” 2.19” 13.11” 40.00” 805 (366)

8” 29.00”/ 29.13” 7.94” 10.63”/ R-49 15.50” 18.50” 12-Ø1.26” 2.50” 16.50” 47.24” 1386 (630)

10” 33.00”/ 33.13” 9.94” 12.75”/ R-53 18.50” 21.50” 16-Ø1.38” 2.75” 20.00” 57.17” 2420 (1100)

12” 38.00”/ 38.13” 12.38” 15.00”/ R-57 24.00” 22.00” 20-Ø1.38” 3.13" 23.82” 66.73” 3465(1575)


14” 40.50”/ 40.88” 12.69” 16.25”/ R-62 22.00” 25.24” 20-Ø1.61” 3.38” 26.58” 72.44” 4150 (1890)

16” 44.50”/ 44.88” 14.69” 18.50”/ R- 66 24.25” 27.76” 20-Ø1.73” 3.50” 29.72” 85.67” 5313 (2415)

18” 48.00”/ 48.50” 16.69” 21.00”/ R-70 27.00” 31.00” 20-Ø2.00” 4.00” 33.11” 88.47” 7623 (3465)

20” 52.00”/ 52.50” 18.56” 23.00”/ R-74 29.50” 33.75” 20-Ø2.13” 4.25” 36.54” 98.62” 11550 (5250)

24” 61.00”/ 61.75” 22.44” 27.25”/ R-78 35.50” 41.00" 20-Ø2.64” 5.50" 43.62” 114.37” 18480 (8400)






**Dimensions are subject to change without notice.

PRESSURECLASS

DIM.INCHES

END-TO-ENDRF / RTJ

THRUBORE


BOLT CIRCLE

DIAMETER

FLANGE DIAMETER

No. OF HOLES

DIAMETER

FLANGETHICKNESS

FLOOR-TO-CL BORE

MAX.OVERALL HEIGHT

APPROX. WEIGHT


ANSI 1500 HANDWHEEL

OPERATED

4” 21.50”/ 21.63” 3.94” 6.19”/ R-39 9.50” 12.25” 8-Ø1.38” 2.13” 9.00” 31.00” 352 (160)

6” 27.75”/ 28.00” 5.69” 8.50”/ R-46 12.50” 15.50” 12-Ø1.50” 3.25” 13.11” 40.00” 1034 (470)

8” 32.75”/ 33.13” 7.56” 10.63”/ R-50 15.50” 19.00” 12-Ø1.73” 3.63” 16.50” 47.24” 2541 (1155)

10” 39.00”/ 39.38” 9.94” 12.75”/ R-54 19.00” 23.00” 12-Ø2.00” 4.25” 20.00” 57.17” 4158 (1890)


4” 21.50”/ 21.63” 3.94” 6.19”/ R-39 9.50” 12.25” 8-Ø1.38” 2.13” 9.00” 31.00” 352 (160)

6” 27.75”/ 28.00” 5.69” 8.50”/ R-46 12.50” 15.50” 12-Ø1.50” 3.25” 13.11” 40.00” 1034 (470)

8” 32.75”/ 33.13” 7.56” 10.63”/ R-50 15.50” 19.00” 12-Ø1.73” 3.63” 16.50” 47.24” 2541 (1155)

10” 39.00”/ 39.38” 9.94” 12.75”/ R-54 19.00” 23.00” 12-Ø2.00” 4.25” 20.00” 57.17” 4158 (1890)

12” 44.50”/ 45.13” 11.31” 15.00”/ R-58 22.50” 26.50” 16-Ø2.13” 4.88" 23.82” 66.73” 6006 (2730)





1 The seats function with pressureacting on differential areas. A basiclaw of nature makes these valvesseal, but they are also fitted withemergency seat sealant injectionports in case the seats or gate isdamaged. The hydraulic load appliedby the line pressure reduces whendifferential pressures are loweredreducing the amount of wear. Thewear is much lower than thatemployed by mechanically energizedconfigurations.

OPERATING PRINCIPLE


The E-Z SEAL Slab Gate Valve is a full port, through-conduit gate valve designed for geothermal wellhead andflow line applications allowing easy and smooth operation. Optimal clearances combined with the through-conduit and full opening design reduces turbulence and pressure drop. Once again, for geothermalapplications, the optional EPI GeoShield protective coating not only protects the seat and gate sealing surfaces,but the entire surface area of both the gate and seat sets. While at the same time providing a truly affordablealternative to Stellite hard-facing. The EPI GeoShield protection also affords lubricity and reduces operatingtorques.

2 As line pressure is applied, thepressure acts on the gate, forcingit against the PTFE sealant ring &compressing it until the gate restsagainst the seat. The O-ring sealalso is forced firmly against theseat pocket. This O-ring preventsany downstream flow around theseat.

HOW THE E-Z SEAL SLAB GATE VALVE WORKS

3 When the gate has traveled to itsfinal closed position & pressure hasequalized, a seal is formed betweenthe PTFE sealant ring on the face ofthe seat & the gate surface on theupstream & downstream sides. Thisvalve automatically relieves itselfof excess pressure. Here’s how:When the body pressure exceedsthe line pressure, the valve’supstream seat is forced back into itsseat pocket & the excess pressure isbled back between the seat & thegate on the upstream side.

E-Z SEAL SLAB GATE VALVE

TRIM CHART

COMPONENTRECOMMENDED

SPARE PARTS

E21 TRIM

STANDARD SERVICEOPERATING TEMP. 250°F MAX.

BODY ASTM A216 WCC

BODY DRAIN PLUG 1215 STEEL Zn

GATE ** ASTM A216 WCC + ENP or EQ

SEATS ** A105 + ENP or EQ

SEAT SEGMENT SKIRTS A36 + ENP or EQ

SEAT INSERTS ** DEVLON or RPTFE

SEAT O-RINGS VITON

BONNET ASTM A216 WCC or EQ

BONNET GASKET ** VITON

SEAT SEALANT FITTINGS ** 1215 STEEL Zn

STEM ** 17-4PH SS

YOKE ** AISI 1020 STEEL or EQ

STEM NUT ** ALUMINUM BRONZE

STEM PACKING ** DUCK IMPREGNATED FLUOROELASTOMER

GLAND CARBON STEEL

PACKING FITTING ** 1215 STEEL Zn

BODY VENT FITTING ** 1215 STEEL Zn

STUDS ASTM A193 Gr.B7

NUTS ASTM A194 Gr.2H

HANDWHEEL CAST IRON

STEM PROTECTOR CLEAR PLASTIC / STEEL

NACE Compliant - National Association of Corrosion Engineers, STD MR01.75

TRIM CHART & RECOMMEDED SPARE PARTS


E-Z SEAL SLAB GATE VALVE TRIM CHART


PRESSURECLASS

DIM.INCHES

END-TO-ENDRF / RTJ

THRUBORE


BOLT CIRCLE

PATTERN

FLANGE DIAMETER

No. OF HOLES

DIAMETER

FLANGETHICKNESS

FLOOR-TO-CL BORE

MAX.OVERALL HEIGHT

APPROX. WEIGHT


ANSI 150 HANDWHEEL

OPERATED

3” 14.00”/ 14.13” 2.94” 5.00”/ R-29 6.00” 7.50” 4-Ø0.750” 0.956” 7.75” 27.32” 112 (51)

4” 16.00”/ 16.13” 3.94” 6.19”/ R-36 7.50” 9.00” 8-Ø0.750” 0.956” 9.77” 31.00” 125 (57)

6” 19.50”/ 19.63” 5.94” 8.50”/ R-43 9.50” 11.00” 8-Ø0.866” 1.00” 13.54” 41.54” 187 (85)

8” 23.50”/ 23.63” 7.94” 10.63”/ R-48 11.75” 13.50” 8-Ø0.866” 1.14” 16.38” 49.72” 345 (157)

10” 26.50”/ 26.63” 9.94” 12.75”/ R-52 14.25” 16.00” 12-Ø0.984” 1.20” 19.69” 55.91” 526 (239)

12” 30.00”/ 30.13” 11.94” 15.00”/ R-56 17.00” 19.00” 12-Ø0.984” 1.27” 22.72” 64.00” 849 (386)


4” 16.00”/ 16.13” 3.94” 6.19”/ R-36 7.50” 9.00” 8-Ø0.750” 0.956” 9.77” 31.00” 125 (57)

6” 19.50”/ 19.63” 5.94” 8.50”/ R-43 9.50” 11.00” 8-Ø0.866” 1.00” 13.54” 41.54” 187 (85)

8” 23.50”/ 23.63” 7.94” 10.63”/ R-48 11.75” 13.50” 8-Ø0.866” 1.14” 16.38” 49.72” 345 (157)

10” 26.50”/ 26.63” 9.94” 12.75”/ R-52 14.25” 16.00” 12-Ø0.984” 1.20” 19.69” 55.91” 526 (239)

12” 30.00”/ 30.13” 11.94” 15.00”/ R-56 17.00” 19.00” 12-Ø0.984” 1.27” 22.72” 64.00” 849 (386)


14” 16.00”/ 16.13” 13.19” 16.25”/ R-59 18.75” 21.00” 12-Ø1.14” 1.39” 25.00” 70.59” 1120 (509)

16” 19.50”/ 19.63” 15.19” 18.50”/ R-64 21.25” 23.50” 16-Ø1.14” 1.46” 28.41” 78.19” 1529 (695)

18” 23.50”/ 23.63” 17.19” 21.00”/ R-68 22.75” 25.00” 16-Ø1.26” 1.58” 31.26” 85.24” 2112 (960)

20” 26.50”/ 26.63” 19.19” 23.00”/ R-72 25.00” 27.50” 20-Ø1.26” 1.70” 34.76” 90.98” 2532 (1151)

24” 30.00”/ 30.13” 23.19” 27.25”/ R-76 29.50” 32.00” 20-Ø1.38” 1.89” 41.95” 109.76” 4140 (1882)

E-Z SEAL SLAB GATE VALVE WEIGHTS & DIMENSIONSCLASS 150






PRESSURECLASS

DIM.INCHES

END-TO-ENDRF / RTJ

THRUBORE


BOLT CIRCLE

DIAMETER

FLANGE DIAMETER

No. OF HOLES

DIAMETER

FLANGETHICKNESS

FLOOR-TO-CL BORE

MAX.OVERALL HEIGHT

APPROX. WEIGHT


ANSI 300 HANDWHEEL

OPERATED

4” 12.50”/ 12.63” 3.94” 6.19”/ R-37 7.88” 10.00” 8-Ø0.866” 1.27” 9.76” 31.00” 180 (82)

6” 15.88”/ 16.50” 5.94” 8.50”/ R-45 10.63” 12.50” 12-Ø0.866” 1.46” 13.70” 40.00” 297 (135)

8” 16.50”/ 17.13” 7.94” 10.63”/ R-49 13.00” 15.00” 12-Ø0.984” 1.64” 16.54” 47.24” 528 (240)

10” 18.00”/ 18.63” 9.94” 12.75”/ R-53 15.25” 17.50” 16-Ø1.14” 1.89” 19.88” 57.17” 704 (320)


4” 12.50”/ 12.63” 3.94” 6.19”/ R-37 7.88” 10.00” 8-Ø0.866” 1.27” 9.76” 30.98” 180 (82)

6” 15.88”/ 16.50” 5.94” 8.50”/ R-45 10.63” 12.50” 12-Ø0.866” 1.46” 13.70” 41.54” 297 (135)

8” 16.50”/ 17.13” 7.94” 10.63”/ R-49 13.00” 15.00” 12-Ø0.984” 1.64” 16.54” 49.72” 528 (240)

10” 18.00”/ 18.63” 9.94” 12.75”/ R-53 15.25” 17.50” 16-Ø1.14” 1.89” 19.88” 55.91” 704 (320)

12” 19.75”/ 20.38” 11.94” 15.00”/ R-57 17.50” 20.50” 16-Ø1.26” 2.00" 22.19” 64.06” 1276 (580)


14” 30.00”/ 30.63” 13.19” 16.25”/ R-61 20.25” 23.00” 20-Ø1.26” 2.14” 25.24” 71.34” 1892 (860)

16” 33.00”/ 33.63” 15.19” 18.50”/ R-65 22.50” 25.50” 20-Ø1.38” 2.27” 28.66” 78.58” 2200 (1000)

18” 36.00”/ 36.63” 17.19” 21.00”/ R-69 24.75” 28.00” 24-Ø1.38” 2.39” 31.50” 85.04” 3520 (1600)

20” 39.00”/ 39.75” 19.19” 23.00”/ R-73 27.00” 30.50” 24-Ø1.38” 2.52” 35.16” 92.20” 3740 (1700)

24” 45.00”/ 45.88” 23.19” 27.25”/ R-77 32.00” 36.00” 24-Ø1.61” 2.77” 41.93” 112.24” 5060 (2300)







PRESSURECLASS

DIM.INCHES

END-TO-ENDRF / RTJ

THRUBORE


BOLT CIRCLE

DIAMETER

FLANGE DIAMETER

No. OF HOLES

DIAMETER

FLANGETHICKNESS

FLOOR-TO-CL BORE

MAX.OVERALL HEIGHT

APPROX. WEIGHT


ANSI 600 HANDWHEEL

OPERATED

4” 17.00”/ 17.13” 3.94” 6.19”/ R-37 8.50” 10.75” 8-Ø0.984” 1.50” 9.76” 31.00” 330 (150)

6” 22.00”/ 22.13” 5.94” 8.50”/ R-45 11.50” 14.00” 12-Ø1.14” 1.88” 13.27” 41.54” 653 (230)

8” 26.00”/ 26.13” 7.94” 10.63”/ R-49 13.75” 16.50” 12-Ø1.26” 2.19” 16.54” 49.33” 990 (450)

10” 31.00”/ 31.13” 9.94” 12.75”/ R-53 17.00” 20.00” 16-Ø1.38” 1.89” 19.88” 55.91” 1914 (870)

12” 33.00”/ 33.13” 12.38” 15.00”/ R-57 19.25” 22.00" 20-Ø1.38” 2.50" 23.60” 64.06” 2310 (1050)


4” 17.00”/ 17.13” 3.94” 6.19”/ R-37 8.50” 10.75” 8-Ø0.984” 1.50” 9.76” 31.00” 330 (150)

6” 22.00”/ 22.13” 5.94” 8.50”/ R-45 11.50” 14.00” 12-Ø1.14” 1.88” 13.27” 41.54” 653 (230)

8” 26.00”/ 26.13” 7.94” 10.63”/ R-49 13.75” 16.50” 12-Ø1.26” 2.19” 16.54” 49.33” 990 (450)

10” 31.00”/ 31.13” 9.94” 12.75”/ R-53 17.00” 20.00” 16-Ø1.38” 1.89” 19.88” 55.91” 1914 (870)

12” 33.00”/ 33.13” 12.38” 15.00”/ R-57 19.25” 22.00" 20-Ø1.38” 2.50" 22.19” 64.06” 2310 (1050)


14” 35.00”/ 35.13” 13.19” 16.25”/ R-61 20.75” 23.75” 20-Ø1.50” 2.75” 25.24” 71.46” 3300 (1500)

16” 39.00”/ 39.13” 15.19” 18.50”/ R-65 23.75” 27.00” 20-Ø1.61” 3.00” 28.66” 78.74” 4180 (1900)

18” 43.00”/ 43.13” 17.19” 21.00”/ R-69 25.75” 29.25” 20-Ø1.75” 3.25” 31.50” 89.09” 5940 (2700)

20” 47.00”/ 47.25” 19.19” 23.00”/ R-73 28.50” 32.00” 24-Ø1.75” 3.50” 35.16” 98.07” 8360 (3800)

24” 55.00”/ 55.38” 23.19” 27.25”/ R-77 33.00” 37.00” 24-Ø2.00” 4.00” 41.93” 115.98” 13200 (6000)








PRESSURECLASS

DIM.INCHES

END-TO-ENDRF / RTJ

THRUBORE


BOLT CIRCLE

DIAMETER

FLANGE DIAMETER

No. OF HOLES

DIAMETER

FLANGETHICKNESS

FLOOR-TO-CL BORE

MAX.OVERALL HEIGHT

APPROX. WEIGHT


ANSI 900 HANDWHEEL

OPERATED

4” 18.00”/ 18.13” 3.94” 6.19”/ R-37 9.25” 11.50” 8-Ø1.26” 1.75” 9.76” 31.00” 396 (180)

6” 24.00”/ 24.13” 5.94” 8.50”/ R-45 12.50” 15.00” 12-Ø1.26” 2.19” 13.27” 41.54” 770 (350)

8” 29.00”/ 29.13” 7.94” 10.63”/ R-49 15.50” 18.50” 12-Ø1.50” 2.50” 17.89” 49.33” 1320 (600)

10” 33.00”/ 33.13” 9.94” 12.75”/ R-53 18.50” 21.50” 16-Ø1.50” 2.75” 20.47” 55.91” 2310 (1050)

12” 38.00”/ 38.13” 12.38” 15.00”/ R-57 21.00” 24.00" 20-Ø1.50” 3.13" 23.60” 64.06” 3300 (1500)


4” 18.00”/ 18.13” 3.94” 6.19”/ R-37 9.25” 11.50” 8-Ø1.26” 1.75” 9.76” 31.00” 396 (180)

6” 24.00”/ 24.13” 5.94” 8.50”/ R-45 12.50” 15.00” 12-Ø1.26” 2.19” 13.27” 41.54” 770 (350)

8” 29.00”/ 29.13” 7.94” 10.63”/ R-49 15.50” 18.50” 12-Ø1.50” 2.50” 17.89” 49.33” 1320 (600)

10” 33.00”/ 33.13” 9.94” 12.75”/ R-53 18.50” 21.50” 16-Ø1.50” 2.75” 20.47” 55.91” 2310 (1050)

12” 38.00”/ 38.13” 12.38” 15.00”/ R-57 21.00” 24.00" 20-Ø1.50” 3.13" 22.19” 64.06” 3300 (1500)


14” 40.50”/ 40.88” 12.69” 16.25”/ R-62 20.75” 23.75” 20-Ø1.50” 2.75” 25.24” 71.46” 3300 (1800)

16” 44.50”/ 44.88” 14.69” 18.50”/ R-66 23.75” 27.00” 20-Ø1.61” 3.00” 28.66” 78.74” 4180 (2300)

18” 48.00”/ 48.50” 16.69” 21.00”/ R-70 25.75” 29.25” 20-Ø1.75” 3.25” 31.50” 89.09” 5940 (3300)

20” 52.00”/ 52.50” 18.56” 23.00”/ R-74 28.50” 32.00” 24-Ø1.75” 3.50” 35.16” 98.07” 11000 (5000)

24” 61.00”/ 61.75” 22.44” 27.25”/ R-78 33.00” 37.00” 24-Ø2.00” 4.00” 41.93” 115.98” 17600 (8000)







PRESSURECLASS

DIM.INCHES

END-TO-ENDRF / RTJ

THRUBORE


BOLT CIRCLE

DIAMETER

FLANGE DIAMETER

No. OF HOLES

DIAMETER

FLANGETHICKNESS

FLOOR-TO-CL BORE

MAX.OVERALL HEIGHT

APPROX. WEIGHT


ANSI 1500 HANDWHEEL

OPERATED

4” 21.50”/ 21.63” 3.94” 6.19”/ R-39 9.50” 12.24” 8-Ø1.38” 2.13” 10.24” 31.50” 330 (150)

6” 27.75”/ 28.00” 5.69” 8.50”/ R-46 12.50” 15.51” 12-Ø1.50” 3.25” 16.38” 49.72” 990 (450)

8” 32.75”/ 33.13” 7.56” 10.63”/ R-50 15.50” 19.02” 12-Ø1.73” 3.63” 17.91” 52.20” 2420 (1100)

10” 39.00”/ 39.38” 9.44” 12.75”/ R-54 19.00” 23.00” 12-Ø2.00” 4.25” 20.47” 58.00” 3960 (1800)

12” 44.50”/ 45.13” 11.31” 15.00”/ R-58 22.00” 26.70" 16-Ø2.13” 4.88" 23.62” 69.57” 5720 (2600)


4” 21.50”/ 21.63” 3.94” 7.68”/ R-39 9.50” 12.24” 8-Ø1.38” 2.13” 10.24” 31.50” 330 (150)

6” 27.75”/ 28.00” 5.69” 10.25”/ R-46 12.50” 15.51” 12-Ø1.50” 3.25” 16.38” 49.72” 990 (450)

8” 32.75”/ 33.13” 7.56” 11.42”/ R-50 15.50” 19.02” 12-Ø1.73” 3.63” 17.91” 52.20” 2420 (1100)

10” 39.00”/ 39.38” 9.44” 13.19”/ R-54 19.00” 23.00” 12-Ø2.00” 4.25” 20.47” 58.00” 3960 (1800)

12” 44.50”/ 45.13” 11.31” 15.00”/ R-58 22.00” 26.70" 16-Ø2.13” 4.88" 23.62” 69.57” 5720 (2600)






api 6d gate valves catalogue · easy to work with, extremely responsive, and quick to solve any...

Documents