apc _ event

8/19/2019 APC _ Event

1/48

15/2/2016 APC | Event Log

http://10.0.4.130/events.htm 1/48

Date Time Event

15-Feb-16 09:12:20 InRow SC: Active alarm(s) have been cleared.

15-Feb-16 09:12:42 System: Email: Could not resolve 'mail.apn.gob.pe'.




15-Feb-16 09:12:20 InRow SC: Internal communication established.













15-Feb-16 09:12:07 System: Network service started. System IP is 10.0.4.130 from manually configured settings.

15-Feb-16 09:12:07 System: Warmstart.

15-Feb-16 08:34:28 InRow SC: Relay output abnormal state no longer exists.

15-Feb-16 08:34:25 InRow SC: Condensate pan full fault no longer exists.

15-Feb-16 08:34:24 InRow SC: Cooling failure no longer exists.

15-Feb-16 08:32:19 InRow SC: Cooling failure exists.

15-Feb-16 08:32:16 InRow SC: Unit control set to On.

15-Feb-16 08:32:16 InRow SC: Unit control set to Standby.


8/19/2019 APC _ Event

2/48


http://10.0.4.130/events.htm 2/48







15-Feb-16 08:28:50 InRow SC: Relay output abnormal state exists.15-Feb-16 08:28:48 InRow SC: Condensate pan full fault exists.


14-Feb-16 12:03:10 System: Web user 'apc' logged out from 10.100.1.96.

14-Feb-16 11:53:07 System: Web user 'apc' logged in from 10.100.1.96.




13-Feb-16 20:31:31 System: Configuration change. Email recipient 4 generation.

13-Feb-16 20:31:31 System: Configuration change. Email recipient 'to' address 4.

13-Feb-16 20:31:18 System: Configuration change. Email recipient 4 format.

13-Feb-16 20:31:18 System: Configuration change. Email recipient 4 generation.

13-Feb-16 20:31:18 System: Configuration change. Email recipient 'to' address 4.



13-Feb-16 19:47:12 InRow SC: Supply air high temperature violation no longer exists.

13-Feb-16 19:46:48 InRow SC: Relay output abnormal state exists.

13-Feb-16 19:46:46 InRow SC: Supply air high temperature violation exists.



13-Feb-16 19:46:00 InRow SC: Persistent high discharge pressure alarm no longer exists.


8/19/2019 APC _ Event

3/48


http://10.0.4.130/events.htm 3/48

13-Feb-16 19:46:00 InRow SC: High discharge pressure alarm no longer exists.



13-Feb-16 19:13:29 System: Email: Could not mail '[email protected]'.



13-Feb-16 19:13:28 System: Email: Could not mail '[email protected]'.13-Feb-16 19:13:28 System: Email: Could not mail '[email protected]'.




















8/19/2019 APC _ Event

4/48


http://10.0.4.130/events.htm 4/48







13-Feb-16 18:49:22 InRow SC: Unit control set to Standby.13-Feb-16 18:49:22 InRow SC: Cooling failure exists.






13-Feb-16 17:44:08 InRow SC: Persistent high discharge pressure alarm exists.

13-Feb-16 17:44:08 InRow SC: High discharge pressure alarm exists.13-Feb-16 17:43:33 InRow SC: Relay output abnormal state no longer exists.







13-Feb-16 17:39:56 InRow SC: High discharge pressure alarm exists.13-Feb-16 17:39:26 InRow SC: Relay output abnormal state no longer exists.






8/19/2019 APC _ Event

5/48


http://10.0.4.130/events.htm 5/48














13-Feb-16 17:37:45 InRow SC: High discharge pressure alarm no longer exists.13-Feb-16 17:37:46 System: Email: Could not mail '[email protected]'.













8/19/2019 APC _ Event

6/48


http://10.0.4.130/events.htm 6/48




















13-Feb-16 17:35:46 InRow SC: High discharge pressure alarm exists.





13-Feb-16 17:32:56 InRow SC: Internal communication established.




8/19/2019 APC _ Event

7/48


http://10.0.4.130/events.htm 7/48







13-Feb-16 17:24:59 System: Email: Could not resolve 'mail.apn.gob.pe'.13-Feb-16 17:22:30 System: Network service started. System IP is 10.0.4.130 from manually configured settings.




















8/19/2019 APC _ Event

8/48


http://10.0.4.130/events.htm 8/48







13-Feb-16 16:46:55 System: Network service started. System IP is 10.0.4.130 from manually configured settings.13-Feb-16 16:46:55 System: Warmstart.



















8/19/2019 APC _ Event

9/48


http://10.0.4.130/events.htm 9/48



























8/19/2019 APC _ Event

10/48


http://10.0.4.130/events.htm 10/48



























8/19/2019 APC _ Event

11/48


http://10.0.4.130/events.htm 11/48














13-Feb-16 14:25:05 InRow SC: Persistent high discharge pressure alarm exists.13-Feb-16 14:25:05 InRow SC: High discharge pressure alarm exists.



13-Feb-16 14:21:20 InRow SC: High discharge pressure alarm exists.




13-Feb-16 14:17:55 InRow SC: High discharge pressure alarm exists.13-Feb-16 14:10:56 InRow SC: Relay output abnormal state exists.

13-Feb-16 14:10:54 InRow SC: Rack inlet high temperature violation exists.

29-Jan-16 17:07:20 InRow SC: Unit control set to On.

29-Jan-16 17:06:29 InRow SC: Active alarm(s) have been cleared.

29-Jan-16 17:06:29 InRow SC: Internal communication established.

29-Jan-16 17:06:16 System: Network service started. System IP is 10.0.4.130 from manually configured settings.

8/19/2019 APC _ Event

12/48


http://10.0.4.130/events.htm 12/48

29-Jan-16 17:06:16 System: Coldstart.

29-Jan-16 16:59:40 InRow SC: Unit control set to Standby.

29-Jan-16 16:57:58 InRow SC: Cool setpoint set to 21.0 C.

29-Jan-16 16:57:32 InRow SC: Relay output abnormal state exists.

29-Jan-16 16:57:30 InRow SC: Air containment system high pressure violation exists.

29-Jan-16 16:56:59 InRow SC: Relay output abnormal state no longer exists.

29-Jan-16 16:56:57 InRow SC: Active alarm(s) have been cleared.29-Jan-16 16:56:57 InRow SC: Air containment system high pressure violation no longer exists.





29-Jan-16 16:55:49 InRow SC: Air containment system high pressure violation no longer exists.


29-Jan-16 16:55:33 InRow SC: Air containment system high pressure violation exists.29-Jan-16 16:55:00 InRow SC: Relay output abnormal state no longer exists.









29-Jan-16 16:50:12 InRow SC: High discharge pressure alarm no longer exists.

29-Jan-16 16:50:04 InRow SC: Configuration type set to RACS.


29-Jan-16 16:49:54 InRow SC: High discharge pressure alarm exists.

15/2/2016 APC | E t L

8/19/2019 APC _ Event

13/48


http://10.0.4.130/events.htm 13/48



29-Jan-16 16:45:48 InRow SC: Configuration type set to In-Row.


29-Jan-16 16:35:45 System: Email: Could not resolve 'mail.apn.gob.pe'.


29-Jan-16 16:35:45 System: Email: Could not resolve 'mail.apn.gob.pe'.29-Jan-16 16:35:44 System: Email: Could not resolve 'mail.apn.gob.pe'.























8/19/2019 APC _ Event

14/48


http://10.0.4.130/events.htm 14/48




























8/19/2019 APC _ Event

15/48


http://10.0.4.130/events.htm 15/48






















29-Jan-16 16:27:34 InRow SC: High discharge pressure alarm no longer exists.29-Jan-16 16:27:45 System: Email: Could not resolve 'mail.apn.gob.pe'.







8/19/2019 APC _ Event

16/48


http://10.0.4.130/events.htm 16/48




























8/19/2019 APC _ Event

17/48

| g

http://10.0.4.130/events.htm 17/48































8/19/2019 APC _ Event

18/48

http://10.0.4.130/events.htm 18/48










29-Jan-16 16:14:18 System: Warmstart.


29-Jan-16 16:13:34 InRow SC: Cooling failure no longer exists.

29-Jan-16 16:13:30 InRow SC: Cooling failure exists.

29-Jan-16 16:13:30 InRow SC: Persistent high discharge pressure alarm no longer exists.






29-Jan-16 16:13:22 InRow SC: Capacity control set to Discrete.


29-Jan-16 16:13:17 InRow SC: Configuration type set to Spot.


29-Jan-16 16:13:07 InRow SC: Persistent high discharge pressure alarm exists.







8/19/2019 APC _ Event

19/48

http://10.0.4.130/events.htm 19/48
















29-Jan-16 16:01:09 InRow SC: Cool deadband set to 2.0 C.


29-Jan-16 16:01:03 InRow SC: Supply air setpoint set to 19.0 C.





29-Jan-16 15:56:16 InRow SC: Cool deadband set to 1.0 C.29-Jan-16 15:56:11 InRow SC: Supply air setpoint set to 19.0 C.






8/19/2019 APC _ Event

20/48

http://10.0.4.130/events.htm 20/48














29-Jan-16 15:46:52 InRow SC: Persistent high discharge pressure alarm no longer exists.






29-Jan-16 15:46:35 InRow SC: Cool deadband set to 2.0 C.







29-Jan-16 15:14:33 InRow SC: Persistent high discharge pressure alarm exists.




8/19/2019 APC _ Event

21/48

http://10.0.4.130/events.htm 21/48








22-Jan-16 23:11:40 System: Web user 'apc' logged out from 10.100.1.96.

22-Jan-16 23:01:34 System: Web user 'apc' logged in from 10.100.1.96.

22-Jan-16 21:58:37 InRow SC: Startup line pressure imbalance alarm no longer exists.

22-Jan-16 21:57:56 InRow SC: Startup line pressure imbalance alarm exists.










05-Jan-16 14:59:54 System: Configuration change. Email recipient 4 format.

05-Jan-16 14:59:42 System: Configuration change. Email recipient 4 generation.

05-Jan-16 14:59:42 System: Configuration change. Email recipient 'to' address 4.

05-Jan-16 14:57:46 System: Set Date.

05-Jan-16 14:57:46 System: Set Time.

05-Jan-16 15:27:47 System: Configuration change. NTP disabled.

05-Jan-16 15:27:37 System: Configuration change. NTP enable.


05-Jan-16 15:26:41 InRow SC: Air filter service interval set to 24 Weeks.


8/19/2019 APC _ Event

22/48

http://10.0.4.130/events.htm 22/48



05-Jan-16 12:44:09 InRow SC: Air filter run hours violation no longer exists.

05-Jan-16 12:44:09 InRow SC: Runhours for the Right Fan Power Supply have been reset.

05-Jan-16 12:44:09 InRow SC: Runhours for the Left Fan Power Supply have been reset.

05-Jan-16 12:44:09 InRow SC: Runhours for the Compressor have been reset.

05-Jan-16 12:44:08 InRow SC: Runhours for the Condensate Pump have been reset.05-Jan-16 12:44:08 InRow SC: Runhours for Condenser Fan 3 have been reset.

05-Jan-16 12:44:08 InRow SC: Runhours for Condenser Fan 2 have been reset.

05-Jan-16 12:44:08 InRow SC: Runhours for Condenser Fan 1 have been reset.

05-Jan-16 12:44:08 InRow SC: Runhours for Evaporator Fan 3 have been reset.



05-Jan-16 12:44:08 InRow SC: Runhours for the Air Filter have been reset.



05-Jan-16 11:33:13 System: Configuration change. Email recipient 3 generation.

05-Jan-16 11:33:13 System: Configuration change. Email recipient 'to' address 3.


05-Jan-16 11:32:17 System: Detected an unauthorized user attempting to access the Web interface from 10.100.1.96.

31-Dec-15 08:07:11 InRow SC: Relay output abnormal state exists.

31-Dec-15 08:07:08 InRow SC: Air filter run hours violation exists.

30-Dec-15 13:42:37 System: Web user 'apc' logged out from 10.100.1.96.

30-Dec-15 13:32:15 System: Web user 'apc' logged in from 10.100.1.96.



21-Dec-15 14:29:48 InRow SC: Startup line pressure imbalance alarm no longer exists.

21-Dec-15 14:29:47 InRow SC: Startup line pressure imbalance alarm exists.

21-Dec-15 14:29:04 InRow SC: Unit control set to On.


21 D 15 14 27 25 I R SC U it t l t t St db

8/19/2019 APC _ Event

23/48

http://10.0.4.130/events.htm 23/48

21-Dec-15 14:27:25 InRow SC: Unit control set to Standby.







02-Dec-15 21:11:41 InRow SC: Active alarm(s) have been cleared.

02-Dec-15 21:11:51 System: Email: Could not resolve 'mail.apn.gob.pe'.


02-Dec-15 21:11:41 InRow SC: Internal communication established.







02-Dec-15 21:11:29 System: Network service started. System IP is 10.0.4.130 from manually configured settings.

02-Dec-15 21:11:29 System: Warmstart.

02-Dec-15 19:23:34 InRow SC: Startup line pressure imbalance alarm no longer exists.

02-Dec-15 19:23:33 InRow SC: Startup line pressure imbalance alarm exists.

02-Dec-15 19:23:06 InRow SC: Unit control set to On.

02-Dec-15 19:23:01 InRow SC: Unit control set to Standby.

30-Nov-15 23:14:44 InRow SC: Startup line pressure imbalance alarm no longer exists.

30-Nov-15 23:14:05 InRow SC: Startup line pressure imbalance alarm exists.

30-Nov-15 23:14:05 InRow SC: Active alarm(s) have been cleared.

30-Nov-15 23:14:05 InRow SC: Internal communication established.

30-Nov-15 23:13:52 System: Network service started. System IP is 10.0.4.130 from manually configured settings.


30 N 15 23 13 52 S t C ld t t

8/19/2019 APC _ Event

24/48

http://10.0.4.130/events.htm 24/48

30-Nov-15 23:13:52 System: Coldstart.

30-Nov-15 17:05:40 System: Email: Could not resolve 'mail.apn.gob.pe'.






30-Nov-15 16:58:59 InRow SC: Rack inlet high temperature violation no longer exists.



30-Nov-15 16:58:57 InRow SC: Rack inlet temperature high threshold set to 34.0 C.




30-Nov-15 16:59:07 System: Email: Could not resolve 'mail.apn.gob.pe'.30-Nov-15 16:59:07 System: Email: Could not resolve 'mail.apn.gob.pe'.


30-Nov-15 16:57:00 InRow SC: Relay output abnormal state exists.



30-Nov-15 16:56:58 InRow SC: Rack inlet high temperature violation exists.



30-Nov-15 16:49:23 InRow SC: Relay output abnormal state no longer exists.







30 Nov 15 16:49:09 InRow SC: Relay output abnormal state exists

8/19/2019 APC _ Event

25/48

http://10.0.4.130/events.htm 25/48



















30-Nov-15 16:45:34 InRow SC: Unit control set to On.










30-Nov-15 16:45:09 System: Email: Could not resolve 'mail apn gob pe'

8/19/2019 APC _ Event

26/48

http://10.0.4.130/events.htm 26/48

30-Nov-15 16:45:09 System: Email: Could not resolve mail.apn.gob.pe .






30-Nov-15 13:30:16 InRow SC: Cool setpoint set to 20.0 C.

30-Nov-15 13:30:10 InRow SC: Supply air setpoint set to 15.2 C.

30-Nov-15 13:29:57 InRow SC: Configuration type set to In-Row.


30-Nov-15 12:31:59 InRow SC: Unit control set to Standby.



30-Nov-15 12:29:39 InRow SC: High discharge pressure alarm no longer exists.

30-Nov-15 12:28:59 InRow SC: High discharge pressure alarm exists.

30-Nov-15 12:26:52 InRow SC: Persistent high discharge pressure alarm no longer exists.



30-Nov-15 12:26:52 InRow SC: Cooling failure no longer exists.


30-Nov-15 12:24:04 InRow SC: Cooling failure exists.

30-Nov-15 12:24:02 InRow SC: Persistent high discharge pressure alarm exists.









30-Nov-15 12:18:02 InRow SC: Relay output abnormal state no longer exists

8/19/2019 APC _ Event

27/48

http://10.0.4.130/events.htm 27/48

30 Nov 15 12:18:02 InRow SC: Relay output abnormal state no longer exists.
















30-Nov-15 12:09:22 InRow SC: Configuration type set to RACS.















8/19/2019 APC _ Event

28/48

http://10.0.4.130/events.htm 28/48

30 Nov 15 11:33:21 InRow SC: Relay output abnormal state no longer exists.

30-Nov-15 11:33:19 InRow SC: Startup line pressure imbalance alarm no longer exists.


30-Nov-15 11:33:13 InRow SC: Startup line pressure imbalance alarm exists.











24-Nov-15 16:00:19 InRow SC: Configuration type set to Spot.24-Nov-15 15:59:32 InRow SC: Active alarm(s) have been cleared.















8/19/2019 APC _ Event

29/48

http://10.0.4.130/events.htm 29/48

24 Nov 15 15:57:12 InRow SC: Unit control set to On.


















24-Nov-15 15:52:43 InRow SC: Configuration type set to In-Row.




24-Nov-15 15:50:50 InRow SC: Unit control set to On.24-Nov-15 15:47:59 InRow SC: Unit control set to Standby.







8/19/2019 APC _ Event

30/48

http://10.0.4.130/events.htm 30/48































8/19/2019 APC _ Event

31/48

http://10.0.4.130/events.htm 31/48































8/19/2019 APC _ Event

32/48

http://10.0.4.130/events.htm 32/48














24-Nov-15 10:28:14 InRow SC: Cooling failure exists.24-Nov-15 10:28:11 InRow SC: Unit control set to On.







24-Nov-15 10:23:38 InRow SC: Cooling failure exists.24-Nov-15 10:23:36 InRow SC: Relay output abnormal state exists.







8/19/2019 APC _ Event

33/48

http://10.0.4.130/events.htm 33/48


























30-Oct-15 16:48:42 InRow SC: Unit control set to On.

30-Oct-15 15:39:01 System: Email: Could not mail '[email protected]'.



30-Oct-15 15:36:20 InRow SC: Unit control set to Standby.

8/19/2019 APC _ Event

34/48

http://10.0.4.130/events.htm 34/48

30-Oct-15 15:00:29 InRow SC: Active alarm(s) have been cleared.

30-Oct-15 15:00:39 System: Email: Could not resolve 'mail.apn.gob.pe'.


30-Oct-15 15:00:29 InRow SC: Internal communication established.







30-Oct-15 15:00:17 System: Network service started. System IP is 10.0.4.130 from manually configured settings.

30-Oct-15 15:00:17 System: Warmstart.








07-Oct-15 23:05:58 InRow SC: Startup line pressure imbalance alarm no longer exists.

07-Oct-15 23:05:14 InRow SC: Startup line pressure imbalance alarm exists.

07-Oct-15 23:05:14 InRow SC: Active alarm(s) have been cleared.



07-Oct-15 23:05:14 InRow SC: Internal communication established.






8/19/2019 APC _ Event

35/48

http://10.0.4.130/events.htm 35/48



07-Oct-15 23:05:01 System: Network service started. System IP is 10.0.4.130 from manually configured settings.

07-Oct-15 23:05:01 System: Coldstart.


30-Sep-15 14:48:30 InRow SC: Unit control set to Standby.

30-Sep-15 14:12:49 InRow SC: Unit control set to On.

30-Sep-15 09:32:29 InRow SC: Relay output abnormal state no longer exists.

30-Sep-15 09:32:27 InRow SC: Condensate pan full fault no longer exists.

30-Sep-15 09:27:21 InRow SC: Relay output abnormal state exists.

30-Sep-15 09:27:18 InRow SC: Condensate pan full fault exists.







26-Sep-15 10:58:41 System: Email: Could not mail '[email protected]'.

26-Sep-15 10:57:26 System: Email: Could not mail '[email protected]'.




17-Sep-15 12:52:46 InRow SC: Startup line pressure imbalance alarm no longer exists.

17-Sep-15 12:52:02 InRow SC: Startup line pressure imbalance alarm exists.

17-Sep-15 12:52:02 InRow SC: Active alarm(s) have been cleared.

17-Sep-15 12:52:12 System: Email: Could not resolve 'mail.apn.gob.pe'.


17-Sep-15 12:52:02 InRow SC: Internal communication established.



17 S 15 12 52 09 S t E il C ld t l ' il b '

8/19/2019 APC _ Event

36/48

http://10.0.4.130/events.htm 36/48






17-Sep-15 12:51:49 System: Network service started. System IP is 10.0.4.130 from manually configured settings.17-Sep-15 12:51:49 System: Coldstart.



24-Aug-15 16:41:38 System: Web user 'apc' logged out from 10.0.0.45.

24-Aug-15 16:30:31 System: Web user 'apc' logged in from 10.0.0.45.

24-Aug-15 16:10:22 InRow SC: Unit control set to On.

24-Aug-15 16:10:35 System: Email: Could not resolve 'mail.apn.gob.pe'.

24-Aug-15 16:10:35 System: Email: Could not resolve 'mail.apn.gob.pe'.24-Aug-15 16:10:21 InRow SC: Unit control set to Standby.






24-Aug-15 16:05:36 InRow SC: Active alarm(s) have been cleared.

24-Aug-15 16:05:44 System: Email: Could not resolve 'mail.apn.gob.pe'.24-Aug-15 16:05:44 System: Email: Could not resolve 'mail.apn.gob.pe'.

24-Aug-15 16:05:36 InRow SC: Internal communication established.






24 Aug 15 16:05:32 System: Email: Could not resolve 'mail apn gob pe'

8/19/2019 APC _ Event

37/48

http://10.0.4.130/events.htm 37/48

24-Aug-15 16:05:32 System: Email: Could not resolve mail.apn.gob.pe .


24-Aug-15 16:05:23 System: Network service started. System IP is 10.0.4.130 from manually configured settings.

24-Aug-15 16:05:23 System: Coldstart.

24-Aug-15 15:55:57 System: Network service started. System IP is 10.0.4.130 from manually configured settings.

24-Aug-15 15:55:57 System: Coldstart.

24-Aug-15 10:17:00 InRow SC: Unit control set to Standby.

21-Aug-15 10:37:50 InRow SC: Relay output abnormal state no longer exists.

21-Aug-15 10:37:48 InRow SC: Air filter run hours violation no longer exists.

21-Aug-15 10:37:46 InRow SC: Runhours for the Air Filter have been reset.







18-Aug-15 12:14:07 System: Web user 'apc' logged out from 10.100.1.96.

18-Aug-15 12:03:52 System: Configuration change. Email recipient 3 generation.

18-Aug-15 12:03:52 System: Configuration change. Email recipient 'to' address 3.

18-Aug-15 11:55:58 System: Web user 'apc' logged in from 10.100.1.96.



17-Aug-15 04:10:10 InRow SC: Relay output abnormal state exists.

17-Aug-15 04:10:08 InRow SC: Air filter run hours violation exists.







07 Aug 15 20:28:06 InRow SC: Unit control set to Standby

8/19/2019 APC _ Event

38/48

http://10.0.4.130/events.htm 38/48


30-Jul-15 16:48:23 InRow SC: Unit control set to On.

30-Jul-15 14:44:23 InRow SC: Unit control set to Standby.











26-Jun-15 10:54:39 InRow SC: Unit control set to On.

26-Jun-15 10:54:39 InRow SC: Unit control set to Standby.







14-May-15 16:49:51 InRow SC: Unit control set to On.

14-May-15 16:49:50 InRow SC: Unit control set to Standby.

14-May-15 16:49:50 InRow SC: Unit control set to On.

14-May-15 16:49:27 InRow SC: Unit control set to Standby.

14-May-15 10:05:41 InRow SC: Startup line pressure imbalance alarm no longer exists.

14-May-15 10:04:56 InRow SC: Startup line pressure imbalance alarm exists.

14-May-15 10:04:56 InRow SC: Active alarm(s) have been cleared.


14-May-15 10:05:07 System: Email: Could not resolve 'mail.apn.gob.pe'.

14 Ma 15 10:05:06 S stem: Email: Co ld not resol e 'mail apn gob pe'

8/19/2019 APC _ Event

39/48

http://10.0.4.130/events.htm 39/48



14-May-15 10:04:56 InRow SC: Internal communication established.









14-May-15 10:04:43 System: Network service started. System IP is 10.0.4.130 from manually configured settings.

14-May-15 10:04:43 System: Coldstart.

21-Apr-15 15:28:36 InRow SC: Unit control set to On.

21-Apr-15 15:28:36 InRow SC: Unit control set to Standby.







11-Apr-15 09:42:32 InRow SC: Startup line pressure imbalance alarm no longer exists.

11-Apr-15 09:41:46 InRow SC: Startup line pressure imbalance alarm exists.

11-Apr-15 09:41:46 InRow SC: Active alarm(s) have been cleared.

11-Apr-15 09:41:56 System: Email: Could not resolve 'mail.apn.gob.pe'.



11-Apr-15 09:41:46 InRow SC: Internal communication established.




8/19/2019 APC _ Event

40/48

http://10.0.4.130/events.htm 40/48

11 Apr 15 09:41:54 System: Email: Could not resolve mail.apn.gob.pe .







11-Apr-15 09:41:33 System: Network service started. System IP is 10.0.4.130 from manually configured settings.

11-Apr-15 09:41:33 System: Coldstart.

10-Apr-15 12:09:24 InRow SC: Runhours for the Air Filter have been reset.

10-Apr-15 10:17:01 System: Web user 'apc' logged out from 10.100.3.1.

10-Apr-15 10:06:45 System: Web user 'apc' logged i

apc _ event

Documents