ap design guidelines for finch avenue w · 2020. 1. 28. · ap-01 emery village bia streetscape...

AP DESIGN GUIDELINES FOR FINCH AVENUE WEST ........................... AP1 LED Lighting Pole with Banner and Planter- 14ft.................................... AP2 LED Lighting Pole with Double Banner - 14ft......................................... AP3 LED Lighting Pole Adapter -14ft Pole...................................................... AP4 Concrete Planters.................................................................................... AP5 Stainless Steel Backless Bench ............................................................. AP6 Stainless Steel Bench........................................................................... AP7 Mixed Used Corridor Options................................................................. AP8 Planter 36 Inch Height.............................................................................

19

161719222432

STREETSCAPE MANUAL FOR LANDOWNERS

AP-01

Emery Village BIA Streetscape Manual for Landowners

AP .1 LED LIGHTING POLE WITH BANNER AND PLANTER - 14FT.Landowners should include Section 5.14.1 to 5.14.7 in the Landscape Plans.

Toronto Emery Village BIA (55213)

LCP60282-55213-160(SA)OB.DOC 12-12-2014 Page 1 / 8

Type New InstallationQty 2 Luminaire MPTC-35W32LED4K-T-LE4-120-BKTX

Description of Components:

Hood: Made of die cast A360.1 Aluminum alloy 0.100 (2.5mm) minimum thickness, mechanically assembled to the cast aluminum heat sink.

Guard: In a round shape with 4 arms and a built-in mechanical ring, this guard is a one piece die cast A360 Aluminum alloy 0.100 (2.5mm) minimum thickness, mechanically assembled to the fitter.

Access-Mechanism: A die cast A360.1 Aluminum alloy 0.100 (2.5mm) minimum thickness technical ring with latch and hinge.

Light Engine: LEDgine composed of 4 main components: LED lamp / Optical System / Heat Sink / DriverElectrical components are RoHS compliant. Maximum ambient operating temperature up to 40C(104F) degrees.

Lens: Made of soda-lime tempered glass lens, mechanically assembled and sealed onto the ring of the access mechanism.

Lamp: LED Module (Included), LED type Philips Lumileds LUXEON T. Composed of 32 high-performance white LEDs. Color temperature of 4000 Kelvin nominal, 70 CRI. Operating lifespan based on TM-21 extrapolation to get results after which 50% of LEDs still emits over 70% (L70) of its original lumen output. Use of metal core board ensures greater heat transfer and longer lifespan of the light engine.

Optical System: (LE4), IES type IV (asymmetrical). Composed of high-performance optical polymer refractor lenses to achieve desired distribution optimized to get maximum spacing, target lumens and a superior lighting uniformity. System is rated IP66. Performance shall be tested per LM-63, LM-79 and TM-15 (IESNA) certifying its photometric performance. Street side indicated.Dark Sky compliant with 0% uplight and U0 per IESNA TM-15.

EPA: 1.698 sq ft / weight: 32.2 lb (14.6 kg)Note: 3D image may not represent color or option selected.

Logos above include link, click to access.

AP .1.1 Lumec Detail 1 of 6 14ft. Lighting Pole with Banner/Planter

AP-02Emery Village BIA Streetscape Manual for Landowners


LCP60282-55213-160(SA)OB.DOC 12-12-2014 Page 2 / 8

Heat Sink: Made of cast aluminum optimising the LEDs efficiency and life. Product does not use any cooling device with moving parts (only passive cooling device)

Driver: High power factor of 95%. Electronic driver, operating range 50/60 Hz. Auto-adjusting universal voltage input from 120 to 277 VAC rated for both application line to line or line to neutral, Class I, THD of 20% max. Maximum ambient operating temperature from -40F(-40C) to 130F(55C) degrees. Certified in compliance to UL1310 cULus requirement. Dry and damp location. Assembled on a unitized removable tray with Tyco quick disconnect plug resisting to 221F(105C) degrees. Driver comes with dimming compatible 0-10 volts.

The current supplying the LEDs will be reduced by the driver if the driver experiences internal overheating as a protection to the LEDs and the electrical components. Output is protected from short circuits, voltage overload and current overload. Automatic recovery after correction. Standard built-in driver surge protection of 2.5kV (min).

Surge Protector: Surge protector tested in accordance with ANSI/IEEE C62.45 per ANSI/IEEE C62.41.2 Scenario I Category C High Exposure 10kV/10kA waveforms for Line-Ground, Line-Neutral and Neutral-Ground, and in accordance with U.S. DOE (Department of Energy) MSSLC (Municipal Solid-State Street Lighting Consortium) model specification for LED roadway luminaires electrical immunity requirements for High Test Level 10kV / 10kA.

Fitter: Made of die cast A360.1 Aluminum alloy 0.100 (2.5mm) minimum thickness, the fitter is complete with a watertight access door giving access to the driver rated IP66, and a terminal block that accepts (#2 max.) wires from the primary circuit. Comes with an easy self adjusting system with two 2 set screws 3/8 16 UNC for ease of maintenance and installation. Fits on a 4"(102mm) outside diameter by 4"(102mm) long tenon.


AP-03



LCP60282-55213-160(SA)OB.DOC 12-12-2014 Page 3 / 8

Configuration

Type New InstallationQty 1 Bracket [CAL2C-001]-2-90DEG-BKTX


Holder: Shall be made from cast 356 aluminum, welded to the arm. Complete with an adaptor providing a 4"(102mm) by 4"(102mm) tenon for the fixtures.

Bracket Options: (90DEG),Bracket to be oriented at 90 degree from access door.

Bracket Weight: 15 lbs (6.8 kg)




LCP60282-55213-160(SA)OB.DOC 12-12-2014 Page 4 / 8


Pole Shaft: Shall be made from a 4" (102mm) round high tensile carbon steel tubing, having a 0.250" (6.4mm) wall thickness, welded to the pole base.

Joint Cover: Two-piece round joint cover made from cast 356 aluminum, mechanically fastened with stainless steel screws.

Pole Base: Shall be made from a 6 5/8" (168mm) round high tensile carbon steel tubing base having a 0.180" (4.6mm) wall thickness, welded to both the bottom and top of the anchor plate.

Maintenance Opening: The pole shall have a 4 1/2" x 10" (114mm x 254mm) maintenance opening centered 21" (533mm) from the bottom of the anchor plate, complete with a weatherproof embossed aluminum cover and a copper ground lug.

Base Cover: Two piece round base cover made from cast 356 aluminum, mechanically fastened with stainless steel screws.

Pole Options: (BA) Single, upper and lower arms (2), clamp-on type, made of steel tubing, 1 1/16" (27mm) outside diameter, mechanically assembled to the pole, complete with a standard cast aluminum decorative ball. (GFI) Duplex receptacle, WR Weather Resistant, 120 volts, ground fault interrupter, complete with an in-use weatherproof aluminum painted cover. Possibility of padlock (Padlock not included). 15 amp., NEMA 5-15R. (PS) Single plant support, Clamp-on type, made of steel tubing, 1 1/16" (27mm) outside diameter, mechanically assembled to the pole, complete with standard cast aluminum decorative ball.

Note: A tenon will be provided when the luminaire or bracket does not fit directly on pole shaft. Tenon not shown on the drawing.

IMPORTANT: Philips Lumec strongly recommends the installation of the complete lighting assembly with all of its accessories upon the anchoring of the pole. This will ensure that the structural integrity of the product is maintained throughout its lifetime.

Pole Weight: 145 lbs (65.9 kg)

Type New InstallationQty 1 Pole SM6V-14-BACS25(2)-GFII-PSCS16-BKTX

Comes with 4 steel anchor bolts, 3/4" X 17" + 3" J Type Bolts, 8 nuts and 8 washers. Important: Do not obstruct space between anchor plate and concrete base.

-Bolt Circle: 10 1/2" (267mm)

- Thickness: 3/4"(19mm)

- NOTE: Bolt Circle Allowed: 9" to 11" 229mm to 279mm

Base & Bolts Information Anchor Plate Free opening


AP-05



LCP60282-55213-160(SA)OB.DOC 12-12-2014 Page 5 / 8


Wiring: The connection of the luminaire is done using a terminal block connector 600V, 85A for use with bare son (#2 max.) wires from the primary circuit, located inside the fitter.

Hardware: All exposed screws shall be stainless steel with Ceramic primer-seal basecoat to reduce seizing of the parts. All seals and sealing devices are made and/or lined with EPDM and/or silicone.

Finish: Color to be black textured RAL9005TX (BKTX) and in accordance with the AAMA 2603 standard. Application of polyester powder coat paint (4 mils/100 microns) with ± 1 mils/24 microns of tolerance. The Thermosetting resins provides a discoloration resistant finish in accordance with the ASTM D2244 standard, as well as luster retention in keeping with the ASTM D523 standard and humidity proof in accordance with the ASTM D2247 standard.

The surface treatment achieves a minimum of 2000 hours for salt spray resistant finish in accordance with testing performed and per ASTM B117 standard.

Warning: The maximum weight supported by the plant support is 100 lb (45 kg).

LED products manufacturing standard: The electronic components sensitive to electrostatic discharge (ESD) such as light emitting diodes (LEDs) are assembled in compliance with IEC61340-5-1 and ANSI/ESD S20.20 standards so as to eliminate ESD events that could decrease the useful life of the product.

Quality Control: The manufacturer must provide a written confirmation of its ISO 9001-2008 and ISO 14001-2004 International Quality Standards Certification.

Vibration Resistance: The MPTC meets the ANSI C136.31, American National Standard for Roadway Luminaire Vibration specifications for Bridge/overpass applications. (Tested for 3G over 100 000 cycles by an independent lab)

Web site information details: Click on any specific information details you need:

Paint finish / Warranties / Installation pictures / ISO 9001-2008 Certification / ISO 14001-2004 Certification /cULus Certification / CSA Pole Certification

Miscellaneous




LCP60282-55213-160(SA)OB.DOC 12-12-2014 Page 6 / 8

Parametric Options Illustration (schematic pole shown, for actual pole representation please refer to previous pages)

Access Door

Access Door


AP-07


Presentation640, Curé-Boivin Boisbriand (Québec)Canada, J7G 2A7

Toronto Emery Village BIA (55213)Type: New Installation MPTC-35W32LED4K-T-LE4-120-[CAL2C-001]-2-90DEG-SM6V-14-BACS25(2)-GFII-PSCD16-3/4x20-10 1/2-DEC-BKTX MPTC-TA-60282-55213-IT 20141110_144502.doc



AP .1.8 Existing Lighting Pole Retrofit for LED Lighting

AP .1 LED LIGHTING POLE ADAPTER - 14FT.Where BIA light poles have been built, Landowners should include Section 5.14.8 in the Landscape Plans. This adapter retrofits the smaller 3.5” of the conventional lighting pole for the 4” needed for the new LED fixture.

AP-09


AP .2 LED LIGHTING POLE WITH BANNER WITH DOUBLE PLANTER - 14FT.Landowners should include Section 5.14.1 to 5.14.7 in the Landscape Plans.


LCP60282-55213-160(SA)OB.DOC 12-12-2014 Page 1 / 8

Type New InstallationQty 2 Luminaire MPTC-35W32LED4K-T-LE4-120-BKTX


Hood: Made of die cast A360.1 Aluminum alloy 0.100 (2.5mm) minimum thickness, mechanically assembled to the cast aluminum heat sink.

Guard: In a round shape with 4 arms and a built-in mechanical ring, this guard is a one piece die cast A360 Aluminum alloy 0.100 (2.5mm) minimum thickness, mechanically assembled to the fitter.

Access-Mechanism: A die cast A360.1 Aluminum alloy 0.100 (2.5mm) minimum thickness technical ring with latch and hinge.

Light Engine: LEDgine composed of 4 main components: LED lamp / Optical System / Heat Sink / DriverElectrical components are RoHS compliant. Maximum ambient operating temperature up to 40C(104F) degrees.

Lens: Made of soda-lime tempered glass lens, mechanically assembled and sealed onto the ring of the access mechanism.

Lamp: LED Module (Included), LED type Philips Lumileds LUXEON T. Composed of 32 high-performance white LEDs. Color temperature of 4000 Kelvin nominal, 70 CRI. Operating lifespan based on TM-21 extrapolation to get results after which 50% of LEDs still emits over 70% (L70) of its original lumen output. Use of metal core board ensures greater heat transfer and longer lifespan of the light engine.

Optical System: (LE4), IES type IV (asymmetrical). Composed of high-performance optical polymer refractor lenses to achieve desired distribution optimized to get maximum spacing, target lumens and a superior lighting uniformity. System is rated IP66. Performance shall be tested per LM-63, LM-79 and TM-15 (IESNA) certifying its photometric performance. Street side indicated.Dark Sky compliant with 0% uplight and U0 per IESNA TM-15.

EPA: 1.698 sq ft / weight: 32.2 lb (14.6 kg)Note: 3D image may not represent color or option selected.

Logos above include link, click to access.

AP .2.1 Lumec Detail 1 of 6 14ft. Lighting Pole with Double Banner

Emery Village BIA Streetscape Manual for Landowners AP-10


LCP60282-55213-160(SA)OB.DOC 12-12-2014 Page 2 / 8

Heat Sink: Made of cast aluminum optimising the LEDs efficiency and life. Product does not use any cooling device with moving parts (only passive cooling device)

Driver: High power factor of 95%. Electronic driver, operating range 50/60 Hz. Auto-adjusting universal voltage input from 120 to 277 VAC rated for both application line to line or line to neutral, Class I, THD of 20% max. Maximum ambient operating temperature from -40F(-40C) to 130F(55C) degrees. Certified in compliance to UL1310 cULus requirement. Dry and damp location. Assembled on a unitized removable tray with Tyco quick disconnect plug resisting to 221F(105C) degrees. Driver comes with dimming compatible 0-10 volts.

The current supplying the LEDs will be reduced by the driver if the driver experiences internal overheating as a protection to the LEDs and the electrical components. Output is protected from short circuits, voltage overload and current overload. Automatic recovery after correction. Standard built-in driver surge protection of 2.5kV (min).

Surge Protector: Surge protector tested in accordance with ANSI/IEEE C62.45 per ANSI/IEEE C62.41.2 Scenario I Category C High Exposure 10kV/10kA waveforms for Line-Ground, Line-Neutral and Neutral-Ground, and in accordance with U.S. DOE (Department of Energy) MSSLC (Municipal Solid-State Street Lighting Consortium) model specification for LED roadway luminaires electrical immunity requirements for High Test Level 10kV / 10kA.

Fitter: Made of die cast A360.1 Aluminum alloy 0.100 (2.5mm) minimum thickness, the fitter is complete with a watertight access door giving access to the driver rated IP66, and a terminal block that accepts (#2 max.) wires from the primary circuit. Comes with an easy self adjusting system with two 2 set screws 3/8 16 UNC for ease of maintenance and installation. Fits on a 4"(102mm) outside diameter by 4"(102mm) long tenon.


AP-11



LCP60282-55213-160(SA)OB.DOC 12-12-2014 Page 3 / 8

Configuration

Type New InstallationQty 1 Bracket [CAL2C-001]-2-90DEG-BKTX


Holder: Shall be made from cast 356 aluminum, welded to the arm. Complete with an adaptor providing a 4"(102mm) by 4"(102mm) tenon for the fixtures.

Bracket Options: (90DEG),Bracket to be oriented at 90 degree from access door.

Bracket Weight: 15 lbs (6.8 kg)




LCP60282-55213-160(SA)OB.DOC 12-12-2014 Page 4 / 8


Pole Shaft: Shall be made from a 4" (102mm) round high tensile carbon steel tubing, having a 0.250" (6.4mm) wall thickness, welded to the pole base.

Joint Cover: Two-piece round joint cover made from cast 356 aluminum, mechanically fastened with stainless steel screws.

Pole Base: Shall be made from a 6 5/8" (168mm) round high tensile carbon steel tubing base having a 0.180" (4.6mm) wall thickness, welded to both the bottom and top of the anchor plate.

Maintenance Opening: The pole shall have a 4 1/2" x 10" (114mm x 254mm) maintenance opening centered 21" (533mm) from the bottom of the anchor plate, complete with a weatherproof embossed aluminum cover and a copper ground lug.

Base Cover: Two piece round base cover made from cast 356 aluminum, mechanically fastened with stainless steel screws.

Pole Options: (BA) Single, upper and lower arms (2), clamp-on type, made of steel tubing, 1 1/16" (27mm) outside diameter, mechanically assembled to the pole, complete with a standard cast aluminum decorative ball. (GFI) Duplex receptacle, WR Weather Resistant, 120 volts, ground fault interrupter, complete with an in-use weatherproof aluminum painted cover. Possibility of padlock (Padlock not included). 15 amp., NEMA 5-15R. (PS) Single plant support, Clamp-on type, made of steel tubing, 1 1/16" (27mm) outside diameter, mechanically assembled to the pole, complete with standard cast aluminum decorative ball.

Note: A tenon will be provided when the luminaire or bracket does not fit directly on pole shaft. Tenon not shown on the drawing.

IMPORTANT: Philips Lumec strongly recommends the installation of the complete lighting assembly with all of its accessories upon the anchoring of the pole. This will ensure that the structural integrity of the product is maintained throughout its lifetime.

Pole Weight: 145 lbs (65.9 kg)

Type New InstallationQty 1 Pole SM6V-14-BACS25(2)-GFII-PSCS16-BKTX

Comes with 4 steel anchor bolts, 3/4" X 17" + 3" J Type Bolts, 8 nuts and 8 washers. Important: Do not obstruct space between anchor plate and concrete base.

-Bolt Circle: 10 1/2" (267mm)

- Thickness: 3/4"(19mm)

- NOTE: Bolt Circle Allowed: 9" to 11" 229mm to 279mm

Base & Bolts Information Anchor Plate Free opening


AP-13



LCP60282-55213-160(SA)OB.DOC 12-12-2014 Page 5 / 8


Wiring: The connection of the luminaire is done using a terminal block connector 600V, 85A for use with bare son (#2 max.) wires from the primary circuit, located inside the fitter.

Hardware: All exposed screws shall be stainless steel with Ceramic primer-seal basecoat to reduce seizing of the parts. All seals and sealing devices are made and/or lined with EPDM and/or silicone.

Finish: Color to be black textured RAL9005TX (BKTX) and in accordance with the AAMA 2603 standard. Application of polyester powder coat paint (4 mils/100 microns) with ± 1 mils/24 microns of tolerance. The Thermosetting resins provides a discoloration resistant finish in accordance with the ASTM D2244 standard, as well as luster retention in keeping with the ASTM D523 standard and humidity proof in accordance with the ASTM D2247 standard.

The surface treatment achieves a minimum of 2000 hours for salt spray resistant finish in accordance with testing performed and per ASTM B117 standard.

Warning: The maximum weight supported by the plant support is 100 lb (45 kg).

LED products manufacturing standard: The electronic components sensitive to electrostatic discharge (ESD) such as light emitting diodes (LEDs) are assembled in compliance with IEC61340-5-1 and ANSI/ESD S20.20 standards so as to eliminate ESD events that could decrease the useful life of the product.

Quality Control: The manufacturer must provide a written confirmation of its ISO 9001-2008 and ISO 14001-2004 International Quality Standards Certification.

Vibration Resistance: The MPTC meets the ANSI C136.31, American National Standard for Roadway Luminaire Vibration specifications for Bridge/overpass applications. (Tested for 3G over 100 000 cycles by an independent lab)

Web site information details: Click on any specific information details you need:

Paint finish / Warranties / Installation pictures / ISO 9001-2008 Certification / ISO 14001-2004 Certification /cULus Certification / CSA Pole Certification

Miscellaneous




LCP60282-55213-160(SA)OB.DOC 12-12-2014 Page 6 / 8

Parametric Options Illustration (schematic pole shown, for actual pole representation please refer to previous pages)

Access Door

Access Door


AP-15


Presentation640, Curé-Boivin Boisbriand (Québec)Canada, J7G 2A7

Toronto Emery Village BIA (55213)Type: New Installation MPTC-35W32LED4K-T-LE4-120-[CAL2C-001]-2-90DEG-SM6V-14-BACS25(2)-GFII-PSCD16-3/4x20-10 1/2-DEC-BKTX MPTC-TA-60282-55213-IT 20141110_144502.doc



AP .3.1 Existing Lighting Pole Retrofit for LED Lighting

AP .3 LED LIGHTING POLE ADAPTER - 14FT.Where BIA light poles have been built, Landowners should include Section 5.14.8 in the Landscape Plans. This adapter retrofits the smaller 3.5” of the conventional lighting pole for the 4” needed for the new LED fixture.

AP-17


RECKLI® 1/01 AmrumType A+E � 5000 mm x � 990 mm fix

ca.-M

aße

· app

rox.

dim

ensi

ons

· dim

ensi

ons

appr

ox. ·

dim

ensi

oni c

a. ·

dim

ensi

ones

apr

ox

AP .4 CONCRETE PLANTERSRaised planters within the BIA streetscape improvements are to be replaced with concrete planters using formliner system. Landowners should specify on Landscape plans the Reckli Formliner manufacturer and the Amrum form as the liner pattern.

RECKLI SUPPLIER:Tri-Krete Limited 152 Toryork Dr. Toronto, Ontario M9L 1X6T: (416) 746-2479 F: (416) 746-6218www.tri-krete.com

NOTE:Tri-Krete to provide shop drawings prior to installation. Design of Planter will vary according to site conditions.

AP-19


AP .5 STAINLESS STEEL BACKLESS BENCH

AP .5.1 Manufacturer’s Detail for Stainless Steel Backless Bench

CL

IEN

TD

AT

E

09

-17

-15

Envyro

Zone in

c.

41

6-6

74

-88

00

Pa

rt N

o:

EL-

01

2-

A7

2

Mila

no

Pa

nc

a w

/arm

res

ts

inc.

20

14

.12

5 &

.25

0”

S

tain

less S

tee

l1

6 g

au

ge

, .7

50

” D

ia. T

ub

ing

1

6 g

au

ge

, 2

.00

” D

ia. T

ub

ing

” t

hk p

late

in 3

04

Mil

an

o P

an

ca

: E

L-0

12

-A7

2

FR

AM

E:

Ins

tall

ati

on

: F

ree

sta

nd

ing

or

3/8

”x1

6 c

on

cre

te f

loo

r a

nch

ors

FIN

ISH

: #

4 B

rush

ed

Sta

inle

ss S

tee

l

AP-22


AP .6 STAINLESS STEEL BENCH

AP .6.1 Manufacturer’s Detail for Stainless Steel Bench

CL

IEN

TD

AT

E

07

-30

-15

Envyro

Zone

inc.

416-6

74-8

800

Part

No:

EL-

01

1-

72

AR

Mila

no

w/a

rmre

st

s

inc. 2

014

.125

&.2

50”

S

tain

less S

teel

16 g

auge, .7

50”

Dia

. T

ubin

g

16 g

auge, 2.0

0”

Dia

. T

ubin

g

” thk p

late

in 3

04

Mil

an

o B

en

ch

: E

L-0

11

-72

AR

FR

AM

E:

Insta

llati

on

: F

ree s

tandin

g o

r 3/8

”x16 c

oncre

te flo

or

anchors

Sid

e V

iew

Fro

nt V

iew

FIN

ISH

: #4 B

rushed S

tain

less S

teel

Fro

nt

Vie

w

72.0

0 in

1.4

2"

1.89"

1.03

*19

.00

”

25

.00

”

33

.00

”

3.5

6"

72

.00

”

AP-24


AP .7 MIXED USED CORRIDORS OPTION C

AP .7.1 Emery Village Logo in Transition Strip

AAA

1A

1

AP-25

AP .7 MIXED USED CORRIDORS OPTION D

AP .7.2 Dual Cycle Path at Sidewalk Grade with Separator Strip

AA

1A

1

AP-26


AP .7 MIXED USED CORRIDORS OPTION E

AP .7.3 Single Cycle Path at Road Grade.

150mm Concrete Flush Curb

AAA

1A

1

AP-27

AP .7 MIXED USED CORRIDORS OPTION F

AP .7.4 Wide Crosswalk Treatment

A

A1 A1

AP-28


AP .7 MIXED USED CORRIDORS OPTION G

AP .7.5 Small Crosswalk Treatment

AA

A1 A1

AP-29

AP .7 MIXED USED CORRIDORS OPTION F

AP .7.6 Typical Furniture Layout

AP-30


AP .7 MIXED USED CORRIDORS OPTION G

AP .7.7 Typical Junction Approach

AAA

1A

1

AP-31

AP .7.8 Corduroy Paving Detail

AP-32

CL

IEN

TD

AT

E

08

-19

-15

Envyro

Zone in

c.

416-6

74-8

800

Part

No:

CA

-16

7-P

Em

ery

Vill

ag

e P

lan

te

r 3

6”x

36

”

inc.

20

14

.100 A

lum

iniu

m P

anels

2”

Round T

ube, 1”

Sq T

ube,

16 g

a. A

ngle

.

Fin

ish

: P

ow

der

Coating .

(Ben

gal S

ilver,

Tig

er

Dry

lac)

Fa

ce

Vie

w

Fa

ce

Vie

w

To

p V

iew

Heri

tag

e P

lan

ter

(Em

ery

villa

ge)

Lin

er

Siz

e :

28”x

28”

x 8

”hM

atl

: 16 g

auge g

alv

aniz

ed s

teel

Vo

lum

e:

102 liters

Bo

dy M

atl

:

Insta

llati

on

: F

ree s

tandin

g o

r 3/8

16 a

nchors

To

p V

iew

Ga

lva

niz

ed

Lin

er

Ho

les f

or

an

ch

orin

g.

(2)e

a f

oo

t

2”

Dia

.P

osts

Str

uctu

ral

ste

el fr

am

e

Em

ery

Vill

ag

e L

og

om

od

ifie

d f

or

lase

r cu

ttin

g.

Ga

lva

niz

ed

Lin

er


AP .8 PLANTER - 36 INCH HT

SF .8.1 Manufacturer’s Detail for 36” Ht Planter.

ap design guidelines for finch avenue w · 2020. 1. 28. · ap-01 emery village bia streetscape...

Documents