“THE AUGER IS THE ANSWER”

MODEL ST1540/30 & ST1540/30IN HIGH DENSITY STATIONARY COMPACTOR

SANI-TECH AUGER

DOES IT ALL SANI-TECH augers pre-crush and compact in one powerful motion. The auger continuously runs in a forward direction, while crushing and reducing the size of what it is fed. This enables it to compact up to five times faster t h a n c o n v e n t i o n a l h y d r a u l i c compactors without the expense of purchasing a separate precrusher.

The Sani-Tech Model ST1540/30 15HP auger compactor is ideal for the types of waste and recyclables generated by:

• Business Parks • Food Processing Plants • Hospitals

• Industrial Parks • Municipalities • Manufacturers • Prisons • Shopping Malls • Thrift Stores

The Sani-Tech Model ST1540/30IN Industrial Compactor is designed to handle your

tougher applications. It has a longer, stronger shaft, heavy duty gearbox and bearings, which allow it to handle a steady stream of large and bulky materials.

With the Sani-Tech auger compactor all you have to do is throw the material into the

compactor, turn it on and walk away. When you return, the material will be safely processed into a receiver bin and the compactor will be ready for more.

COST SAVINGS IS THE BOTTOM LINE

Substantial reductions in operating costs are obtained by:

increased compaction, labor savings and reduced trash pick-ups.

SANI-TECH SYSTEMS • PO BOX 444 • DUVALL, WA 98019 • (425) 788-6444 • FAX (425) 844-8625

Specifications are subject to change without notice to accommodate design improvements.

SPECIFICATIONS Hopper Capacity: 4.8 Cubic Yards Bi-fold Door Size: 36” W X 30” H Auger Diameter: Tapered 40” to 30” Auger RPM: 9 Motor: 15 HP Displacement Rate: 314 cu. yds./hr. Electrical: 240v/480v - 3 Phase Amperage: 35a / 18a Drive: Electro-mechanical Control Panel: UL listed 110 volt Weight: 5000# Auger Torque: 270,000 In. Lbs

DEALER:

DIMENSIONS Model/ Cu. Yd. Overall Receiver Body Length Length Tare Wgt. ST1540/30-15 15’ - 10” 9’ - 8” 4,100 lbs. ST1540/30-20 18’ - 10” 12’ - 8” 4,700 lbs. ST1540/30-25 21’ - 10” 15’ - 8” 5,400 lbs. ST1540/30-30 24’ - 10” 18’ - 8” 5,800 lbs. ST1540/30-35* 26’ - 8” 20’ - 6” 6,600 lbs. ST1540/30-40* 28’ - 8” 22’ - 6” 7,200 lbs. For special orders consult factory. *Request prior confirmation with refuse hauler regarding length of this unit.

STATIONARY COMPACTOR MODEL ST1540/30

8’ - 5 5/8”

4’ - 7 3/8”

3’ - 0”

30” 40”

8’ - 0”

5’ - 0” 5’ - 9”

4”

Plus Receiver

STANDARD FEATURES ♦ Abrasion Resistant Alloy Steel Auger ♦ Replaceable Cast Auger End Wear Plate ♦ Adjustable Running Time ♦ Bin Near Full Indicator ♦ “Almond” Machinery Enamel Finish ♦ Liquid Tight Auger Chamber ♦ Adjustable Compaction Density ♦ Safety Interlock System ♦ Keylock Start/Reverse Switch ♦ Mushroom Stop Switch ♦ Electric Lubrication System

OPTIONAL FEATURES ♦ Odor / Insect Control ♦ Cart Dumper ♦ Custom Paint Colors ♦ Exhaust Fans ♦ Fire Suppression Systems ♦ Custom Hood Designs ♦ Liquid Drain System ♦ Bin Gone Sensor ♦ Photo Eye Automatic Start Consult factory for any custom design work.

3hp to 40hp models available for additional applications.

PO. Box 444 Duvall, WA. 98019

(425) 788-6444 Fax: (425) 844-8625 E-Mail: compactorinfo@sanitech.net

Web Site: sanitech.net

®

dia.

The Sani-Tech Model ST1046/36 10HP Corrugate Compactor you can drasticallyincrease your net payload per haul while saving you labor, time and floor space.

NO MORE BALING!NO NEED TO FLATTEN BOXES AND CARTONS!NO NEED TO STORE BALES FOR PICK-UP!

NO MESSY HYDRAULIC FLUIDS TO MAINTAIN!GREATLY REDUCED FIRE HAZARD!

GET UP TO 400 LBS PER CUBIC YARD OF COMPACTION!

With the Sani-Tech auger compactor all you have to do is throw the material into thecompactor, turn it on and walk away. When you return, the material will be safely

processed into a receiver bin and the compactor will be ready for more.

COST SAVINGS IS THE BOTTOM LINE

Substantial reductions in operating costs are obtained by:increased compaction, labor savings and reduced hauls.

“THE AUGER IS THE ANSWER”

MODEL ST1046/36HIGH DENSITY STATIONARY RECYCLING COMPACTOR

THE SANI-TECH AUGERDOES IT ALL

SANI-TECH augers pre-crush andcompact in one powerful motion.While processing material, the augercontinuously runs in a forwarddirection, crushing and reducing thesize of what it is fed. This enables itto compact up to five times fasterthan convent iona l hydraul iccompactors.

SANI-TECH SYSTEMS • PO BOX 444 • DUVALL, WA 98019 • (425) 788-6444 • FAX (425) 844-8625

®

Specifications are subject to change without notice to accommodate design

STATIONARY COMPACTOR MODEL ST1046/36 SPECIFICATIONS

Hopper Capacity: 4.5 Cubic YardsBi-fold Door Size: 36” W X 30” HAuger Diameter: Tapered 46” to 36”Auger RPM: 8Motor: 10 HPDisplacement Rate: 270 cu. yds./hr.Electrical: 240v/480v - 3 PhaseAmperage: 30a / 15aDrive: Electro-mechanicalControl Panel: UL listed 110 voltWeight: 4100#Auger Torque: 204,000 In. Lbs.

DEALER:

DIMENSIONS Model/ Cu. Yd. Overall Receiver Body

Length Length Tare Wgt.

ST1046/36-15 15’ - 4” 9’ - 8” 4,100 lbs.ST1046/36-20 18’ - 4” 12’ - 8” 4,700 lbs.ST1046/36-25 21’ - 4” 15’ - 8” 5,400 lbs.ST1046/36-30 24’ - 4” 18’ - 8” 5,800 lbs.ST1046/36-35* 26’ - 2” 20’ - 6” 6,600 lbs.ST1046/36-40* 28’ - 2” 22’ - 6” 7,200 lbs.

For special orders consult factory* Request prior confirmation with refuse hauler regarding length of this unit.

OPTIONAL FEATURES♦ Odor / Insect Control♦ Cart Dumper♦ Custom Paint Colors♦ Exhaust Fans♦ Fire Suppression Systems♦ Custom Hood Designs♦ Liquid Drain System♦ Bin Gone Sensor♦ Photo Eye Automatic StartConsult factory for any custom design work.

3hp to 40hp models available for additional applications.

STANDARD FEATURES ♦ Abrasion Resistant Alloy Steel Auger♦ Replaceable Cast Auger End Wear Plate♦ Adjustable Running Time♦ Bin Near Full Indicator♦ “Almond” Machinery Enamel Finish♦ Liquid Tight Auger Chamber♦ Adjustable Compaction Density♦ Safety Interlock System♦ Keylock Start/Reverse Switch♦ Mushroom Stop Switch♦ Electric Lubrication System

PO. Box 444 Duvall, WA. 98019(425) 788-6444 Fax: (425) 844-8625E-Mail: compactorinfo@sanitech.net

Web Site: sanitech.net

®

8’ - 5 5/8”

4’ - 3 5/8”

3’ - 0”

36”46”

8’ - 0”

5’ - 0” 5’ - 4”

4”

Plus Receiver

dia.

“THE AUGER IS THE ANSWER”

MODEL ST2054/40HIGH CAPACITY STATIONARY PRE-CRUSHER / COMPACTOR

The Sani-Tech Model ST2054/40 20HP heavy-duty auger compactoris ideal for the types of waste and recyclables generated by:

• Cardboard Recyclers • Distribution Centers • Industrial Parks• Municipalities • Manufacturers

• Pallet Recyclers • Thrift Stores • Wood Recyclers

With the Sani-Tech auger compactor all you have to do is throw the material into thecompactor, turn it on and walk away. When you return, the material will be safely

processed into a receiver bin and the compactor will be ready for more.

COST SAVINGS IS THE BOTTOM LINE

Substantial reductions in operating costs are obtained by:increased compaction, labor savings and reduced trash pick-ups.

SANI-TECH SYSTEMS • PO BOX 444 • DUVALL, WA 98019 • (425) 788-6444 • FAX (425) 844-8625

®

SANI-TECH AUGERDOES IT ALL

SANI-TECH augers pre-crush and compact inone powerful motion. The auger continuouslyruns in a forward direction, while crushing andreducing the size of what it is fed. This enablesit to compact up to five times faster thanconventional hydraulic compactors without theexpense of purchasing a separate precrusher.

DEALER:

SPECIFICATIONS Hopper Capacity: 6.0 Cubic YardsBi-fold Door Size 40” W X 30” HAuger Diameter: Tapered 54” to 40”Auger RPM: 6Motor: 20 HPDisplacement Rate: 350 cu. yds./hr.Electrical: 240v/480v - 3 PhaseAmperage: 60a / 30aDrive: Electro-mechanicalControl Panel: UL listed 110 voltWeight: 6500#Auger Torque: 500,000 In. Lbs.

DIMENSIONS Model/ Cu. Yd. Overall Receiver Body

Length Length Tare Wgt.

ST2054/40-15 17’ - 6” 9’ - 8” 4,100 lbs.ST2054/40-20 20’ - 6” 12’ - 8” 4,700 lbs.ST2054/40-25 23’ - 6” 15’ - 8” 5,400 lbs.ST2054/40-30 26’ - 6” 18’ - 8” 5,800 lbs.ST2054/40-35* 28’ - 4” 20’ - 6” 6,600 lbs.ST2054/40-40* 30’ - 4” 22’ - 6” 7,200 lbs.

For special orders consult factory.*Request prior confirmation with refuse hauler regarding length of this unit.

STATIONARY COMPACTOR MODEL ST2054/40

Specifications are subject to change without notice to accommodate design improvements.

8’ - 5 5/8”

5’ - 4”

3’ - 0”

40”54”

8’ - 0”

6’ - 0” 7’ - 6”

4”

Plus Receiver

STANDARD FEATURES ♦ Abrasion Resistant Alloy Steel Auger♦ Replaceable Cast Auger End Wear Plate♦ Adjustable Running Time♦ Bin Near Full Indicator♦ “Almond” Machinery Enamel Finish♦ Liquid Tight Auger Chamber♦ Adjustable Compaction Density♦ Safety Interlock System♦ Keylock Start/Reverse Switch♦ Mushroom Stop Switch♦ Electric Lubrication System

OPTIONAL FEATURES♦ Odor / Insect Control♦ Cart Dumper♦ Custom Paint Colors♦ Exhaust Fans♦ Fire Suppression Systems♦ Custom Hood Designs♦ Liquid Drain System♦ Bin Gone Sensor♦ Photo Eye Automatic StartConsult factory for any custom design work.

3hp to 40hp models available for additional applications.

PO. Box 444 Duvall, WA. 98019(425) 788-6444 Fax: (425) 844-8625E-Mail: compactorinfo@sanitech.net

Web Site: sanitech.net

®

The Sani-Tech Model ST1546/36 15HP Corrugate Compactor you can drastically increase your net payload per haul while saving you labor, time and floor space.

NO MORE BALING!

NO NEED TO FLATTEN BOXES AND CARTONS! NO NEED TO STORE BALES FOR PICK-UP!

NO MESSY HYDRAULIC FLUIDS TO MAINTAIN! GREATLY REDUCED FIRE HAZARD!

GET UP TO 400 LBS PER CUBIC YARD OF COMPACTION!

The Sani-Tech Model ST1546/36IN Industrial Compactor is designed to handle your tougher applications. It has a longer, stronger shaft, heavy duty gearbox and

bearings, which allow it to handle a steady stream of large and bulky materials.

With the Sani-Tech auger compactor all you have to do is throw the material into the compactor, turn it on and walk away. When you return, the material will be safely

processed into a receiver bin and the compactor will be ready for more.

COST SAVINGS IS THE BOTTOM LINE

Substantial reductions in operating costs are obtained by: increased compaction, labor savings and reduced hauls.

“THE AUGER IS THE ANSWER”

MODEL ST1546/36 & ST1546/36IN HIGH DENSITY CORRUGATE COMPACTOR

SANI-TECH SYSTEMS • PO BOX 444 • DUVALL, WA 98019 • (425) 788-6444 • FAX (425) 844-8625

SANI-TECH AUGER

DOES IT ALL SANI-TECH augers pre-crush and compact in one powerful motion. The auger continuously runs in a forward direction, while crushing and reducing the size of what it is fed. This enables it to compact up to five times faster t han co n ven t io na l hyd ra u l i c compactors without the expense of purchasing a separate precrusher.

Specifications are subject to change without notice to accommodate design improvements.

SPECIFICATIONS Hopper Capacity: 4.8 Cubic Yards Bi-fold Door Size: 36” W X 30” H Auger Diameter: Tapered 46” to 36” Auger RPM: 9 Motor: 15 HP Displacement Rate: 314 cu. yds./hr. Electrical: 240v/480v - 3 Phase Amperage: 35a / 18a Drive: Electro-mechanical Control Panel: UL listed 110 volt Weight: 5000# Auger Torque: 270,000 In. Lbs.

DEALER:

DIMENSIONS Model/ Cu. Yd. Overall Receiver Body Length Length Tare Wgt. ST1546/36-15 16’ - 1” 9’ - 8” 4,100 lbs. ST1546/36-20 19’ - 1” 12’ - 8” 4,700 lbs. ST1546/36-25 22’ - 1” 15’ - 8” 5,400 lbs. ST1546/36-30 25’ - 1” 18’ - 8” 5,800 lbs. ST1546/36-35* 27’ - 1” 20’ - 6” 6,600 lbs. ST1546/36-40* 29’ - 1” 22’ - 6” 7,200 lbs. For special orders consult factory

*Request prior confirmation with refuse hauler regarding length of this unit.

STATIONARY COMPACTOR MODEL ST1546/36

STANDARD FEATURES ♦ Abrasion Resistant Alloy Steel Auger ♦ Replaceable Cast Auger End Wear Plate ♦ Adjustable Running Time ♦ Bin Near Full Indicator ♦ “Almond” Machinery Enamel Finish ♦ Liquid Tight Auger Chamber ♦ Adjustable Compaction Density ♦ Safety Interlock System ♦ Keylock Start/Reverse Switch ♦ Mushroom Stop Switch ♦ Electric Lubrication System

OPTIONAL FEATURES ♦ Odor / Insect Control ♦ Cart Dumper ♦ Custom Paint Colors ♦ Exhaust Fans ♦ Fire Suppression Systems ♦ Custom Hood Designs ♦ Liquid Drain System ♦ Bin Gone Sensor ♦ Photo Eye Automatic Start Consult factory for any custom design work.

3hp to 40hp models available for additional applications.

®

PO. Box 444 Duvall, WA. 98019 (425) 788-6444 Fax: (425) 844-8625 E-Mail: compactorinfo@sanitech.net

Web Site: sanitech.net

8’ - 5 5/8”

4’ - 7 1/2”

3’ - 0”

36” 46”

8’ - 0”

5’ - 4” 6’ - 1”

4”

Plus Receiver

dia.