“great tools any way you cut it”...jt1720 - verify specs ut1720m1track rubber track jt1720m1 -...

2 UNDERGROUND TOOLS, INC. • www.undergroundtools.com

“Great Tools Any Way You Cut It”

Underground Tools, Inc., headquartered in Lino Lakes, MN, is a world leader in the manufacturing and distribution of ground-engaging wear parts for the construction industry. UTI’s mission was developed based on 100% customer satisfaction – “Produce the highest quality products technology will allow, offer at market leading prices and provide customer service & support that is second to none.”

UTI manufactures a complete line of Drill Pipe and complementary Downhole Tools for Horizontal Directional Drilling equipment. Product line offerings include; Drill Pipe, Sonde Housings, Pilot Bits, Backreamers, Drive Chucks, Starter Rods, Transition Subs, Wear Collars, Carriage Chain, Jaw Dies, Crossover Adapters and much more. Drill Pipe and Tooling is available for all major manufacturers’ drills, including; Ditch Witch

®,

American Augers®, Vermeer

®, Case

®, Astec

®,

Barbco®, Universal

® and more.

Specializing in Horizontal Directional Drilling Tools and Drill Pipe requires knowledge and experience and that’s what you get with UTI. They boast over 200 years of combined experience in the industry with their sales and customer service staff alone. They also take great pride in, and dedicate themselves to providing a “total customer satisfaction” experience.

UNDERGROUND TOOLS, INC. • www.undergroundtools.com 3

Table of Contents

4-21 Ditch Witch® Drill Models

22-43 Vermeer® Drill Models

44-47 Geo-Bore/Terra-Bore

48-65 Backreamers

66-67 Reamer Coupling Charts

68-71 Backreamer Teeth

72-73 Swivels

74-83 Pilot Bits

84 Drilling Fluids

85 Drill Pipe Compounds

86-92 Pulling Accessories

Drill Pipe and Downhole Tooling

from UTI make child’s play of

horizontal directional drilling!


Ditch Witch

® JT520

Part No. Description Product Notes

Drill Stem

UT520DP Drill Pipe 1.25" x 1.5M Long x EU 520HT Flats on Pin End

Saver Sub

UT520DC Saver Sub / Drive Chuck New Version (3-6)

UT520DCE Saver Sub / Drive Chuck Old Version (2-6)

UTJT5DC Saver Sub / Drive Chuck JT 5 Only

Transition Sub

UT400105 EZ Connect 2 Assembly Includes Parts with Asterisk (*)

UT400104 * EZ Connect 2 Transition Sub Only

UT149104 * O- Ring

UT107519 * Retainer Bolt

Locking Collar

UT260060200 * Collar Plain Octagon 1.56" I.D. (JT5 also)

UT260060205 Collar Hardfaced Octagon 1.56" I.D. (JT5 also)

Sonde Housing

UT120110106 2" Dia. Side Load, Ditch Witch® 3-Hole

(12mm) 520 Pipe Box 88B Beacon

UT120110209 Cover Sonde Housing

UTM8125X25SHCS Bolt for Housing Cover

UT120110210 Subsite Compatible 88B Beacon Canoe

UT120110201 Nose Piece, 2 Holes – 3"

UTM8125X25SHCS Nose Piece Bolt

UT121319 O-Ring - Nose Piece

Housing Savers

UTAD520P520EZB Tail Piece 520 Pipe (P) x 520 EZ 2 Octagon (B)

UTAD520P520P Tail Piece 520 Pipe (P) x 520 Pipe (P) Direct Connect

Thrust/Pullback Chain

UT130333 Carriage Chain #80 166 Pitches RLEE

UT130304 #80 Conn Link 2 Required

Track

UT520TRACK Rubber Track

Note: See Geo-Bore/Terra-Bore Section for Additional Heavy-Duty Housing Options - Pgs. 44-45.

Dit

ch W

itch

® J

T520


Ditch Witch

® JT920/JT921


Drill Stem

UT920DP Drill Pipe 1.50" x 2M Long Flats on Pin End

Saver Sub

UT420001620 Saver Sub / Drive Chuck

Transition Sub


UT260010030 * EZ Connect 2 Transition Sub Only Chrome Moly Steel

UT149911 * O- Ring

UT260025110 * Retainer Bolt 3/8" x 16 x 3/4" Socket Head Cap Screw

Locking Collar

UT260060210 * Collar Plain Octagon 2.00" I.D.

UT260060215 Collar Hardfaced Octagon 2.00" I.D.

Sonde Housing

UT260035025 2.750" Dia. Side Load Ditch Witch® 5-Hole 2.00" IF Box 86B


UT260025100 Bolt for Housing Cover 1/2"-13 x 3/4" 3 Required

UT260025110 Safety Bolt for Housing Cover 3/8"-16 x 3/4" 1 Required

UT260027000 Fluid Nozzle 1/8" Heat Treated


Housing Savers

UT250051010 Tail Piece DW EZ-2 Octagon (B) x 2.0" IF (P)

UT250051011 Tail Piece DW - 1.41-6 (P) x 2.0" IF (P) D/C or Straight Trans Sub -

Not EZ2

Rod Wiper

UTRW125 Rod Wiper Standard 1.60" Pipe


UT129006 Carriage Chain Upgrade 171 Pitches #120RC Ser. #2PO770 & Above or

Converted Models

UT130501 Carriage Chain C/L Upgrade (#120R) 2 Required

UT130459 Carriage Chain 208 Pitches #100RC RLEE

UT130401 Carriage Chain C/L (#100R) 2 Required

UT130402 Carriage Chain 1/2 Link (#100R)


Ditch

Witch

® J

T92

0/J

T9

21


Ditch Witch

® JT920L


Drill Stem

UT920LDP Drill Pipe 1.75" x 3M Long Flats on Pin End

Saver Sub

UT420001620 Saver Sub / Drive Chuck New Version (3-6)

Transition Sub



UT149911 * O- Ring


Locking Collar



Sonde Housing







Housing Savers


UT250051011 Tail Piece DW - 1.41-6 (P) x 2.0" IF (P) D/C or Straight Trans Sub - Not EZ2

Rod Wiper



UT130526 Carriage Chain Upgrade 215P #120RC

UT130501 Carriage Chain C/L Upgrade (#120RC) 2 Required

UT130537 Carriage Chain 261 P #100RC

UT130401 Carriage Chain C/L (#100R) 2 Required


Dit

ch W

itch

® J

T920

L


Ditch Witch

® JT922


Drill Stem

UT922DP Drill Pipe 1 1/2" OD x 6' Long Fine Thread

UT922DPC Drill Pipe 1 1/2" OD x 6' Long Coarse Thread

Saver Sub

UT3002340 Saver Sub / Drive Chuck Fine Thread

Transition Sub



UT149911 * O- Ring


Locking Collar



Sonde Housing







Housing Savers


UT250051011 Tail Piece DW - 1.41-6 (P) x 2.0" IF (P) D/C or Straight Trans Sub -

Not EZ2

Rod Wiper


Track

UT922TRACK Rubber Track Ser. #2PO770 & Above or

Converted Models


Ditch

Witch

® J

T92

2


Ditch Witch

® JT1220M1


Drill Stem

UT1220M1DP Drill Pipe 1.90" x 10' Long

Saver Sub


Transition Sub


UT260010027* EZ Connect 3 Transition Sub Only Chrome Moly Steel

UT153856* O- Ring


Locking Collar

UT260060220* Collar Plain Octagon 2.25" I.D.


UT260060227 Collar Carbide Button Octagon 2.25" I.D.

Sonde Housing







Housing Savers


Rod Wiper


Track

UT1220M1TRACK Rubber Track

Note: See Geo-Bore/Terra-Bore Section for Additional Heavy-Duty Housing Options - Pgs. 44-45. Dit

ch W

itch

® J

T1220M

1


Ditch Witch

® JT1720/JT1720M1


Drill Stem

UT1720DP Drill Pipe 2.06" x 3M Long Flats on Pin End

Saver Sub


Transition Sub



UT157194* O- Ring

UT260025100* Retainer Bolt 1/2" X 13 X 3/4" Socket Head Cap Screw

Locking Collar




Sonde Housing

UT260035025 2.750" Dia. Side Load Ditch Witch

® 5-Hole

Subsite 2.00" IF Box 86B

UT260035030 Cover Sonde Housing Fits UT260035025

UT260025100 Bolt for Housing Cover 1/2"-13 x 3/4" 3 Required for UT260035025

UT260025110 Safety Bolt for Housing Cover 3/8"-16 x 3/4" 1 Required for UT260035025

UT260027000 Fluid Nozzle 1/8" Heat Treated Fits UT260035025


UT226638001SS 3.00" Dia. Side Load Ditch Witch

® 7-Hole

Subsite F1-600 Box

UT9540009 Cover Sonde Housing Fits UT226638001SS

UT381638SHCSP Bolt for Housing Cover 3/8" -16 x 3/8" Sm. for UT226638001SS

UT58SH121334TP Bolt for Housing Cover 1/2"-13 x 3/4" Thrd.

(5/8" Dia. Shldr.) Lg. for UT226638001SS

UTSDBS Bolt Set for Housing Cover 1 of each Required

(Small & Large Bolt)

UTSONDNOZ 3-Port Fluid Nozzle 1/8" Fits UT226638001SS

Housing Savers

UT250051020 Tail Piece DW EZ-2 Octagon (B) x 2.0" IF (P) Fits UT260035025

UTD1720SHSUB Tail Piece DW 1720 (P) x F1-600 (P) - D/C or

Trans Sub Fits UT226638001SS

UTDEZ2SHSUB Tail Piece DW EZ-2 Octagon (B) x F1-600 (P) Fits UT226638001SS


Ditch

Witch

® J

T17

20

/JT

17

20M

1


Ditch Witch

® JT1720/JT1720M1


Rod Wiper



UT130535 Carriage Chain, 225 Pitches, #120H Fits JT1720

UT130538 Carriage Chain, Connecting Link #120H Fits JT1720 2 Required

UT129008 Carriage Chain, 193 Pitches, #140H (Includes Conn. Link)

Fits JT1720 Mach 1

UT140HCL Carriage Chain, Connecting Link #140H Fits JT1720 Mach 1 2 Required

Track

UT1720TRACK Rubber Track JT1720 - Verify Specs

UT1720M1TRACK Rubber Track JT1720M1 - Verify Specs


Dit

ch W

itch

® J

T1720/J

T1720M

1


Ditch Witch

® JT1720/JT1720M1 Ditch Witch

® JT2020M1


Drill Stem

UT2020M1DP Drill Pipe 2.06" x 10' Long

Saver Sub


Transition Sub



UT157194* O- Ring


Locking Collar




Sonde Housing


® 5-Hole

Subsite 2.00" IF Box 86B



UT260035015


UT260035015


UT260035015


UT260035015


® 7-Hole

Subsite F1-600 Box

UT9540009 Cover Sonde Housings Fits UT226638001SS



(5/8" Dia. Shldr) Lg. for UT226638001SS





® 5-Hole

Subsite 2.375" API Reg. Box 86B



Ditch

Witch

® J

T20

20

M1


Ditch Witch

® JT2020M1


Housing Savers

UT250051020 Tail Piece DW EZ-2 Octagon (B) x 2.0"

IF (P) Fits UT260035025


API Reg. (P) Fits UT260035015

UTDEZ2SHSUB Tail Piece DW EZ-2 Octagon (B) x

F1-600 (P) Fits UT226638001SS

UTD2020SHSUB Tail Piece DW 2020M1 Pipe (P) x F1-600

(P) - Direct Connect Fits UT226638001SS

Rod Wipers UTRW175 Rod Wiper Standard 2.06" Pipe

UTRW200 Rod Wiper Heavy Duty 2.375" HD Pipe

Track



ch W

itch

® J

T2020M

1


Ditch Witch

® JT2020M1 Ditch Witch

® JT2720


Drill Stem

UT2720DP Drill Pipe 2.375" X 3M Long Flats on Pin End

Saver Sub


Transition Sub



UT157194* O- Ring


Locking Collar




Sonde Housing


® 7-Hole

Subsite F1-600 Box









® 5-Hole





UT260035005


UT260035005



® 6-Hole




Ditch

Witch

® J

T27

20


Ditch Witch

® JT2720


Housing Savers


API Reg. (P) Fits UT260035015

UT260035005

UTD2720SHSUB Tail Piece DW 2720 Pipe (P) x F1-600

(P) - Direct Connect Fits UT226638001SS

UTDEZ2SHSUB Tail Piece DW EZ-2 Octagon (B) x

F1-600 (P) Fits UT226638001SS

Rod Wipers

UT235924 Rod Wiper Standard 2.375" Pipe

UT235924HD Rod Wiper Heavy Duty 2.375" Pipe


UT130605 Carriage Chain 205P #140 DC 1/2" Pin Req. 5 Pitch Repair Sect. 191-057

UT129002 Carriage Chain Upgrade 205P #140 DC 9/16" Pin

Req. 3 Pitch Repair Sect. 191-044

UT191044 Carriage Chain Repair Section 9/16 Pin For UT129002 Chain

Track

UT2720TRACK Rubber Track Verify Specs


ch W

itch

® J

T2720


Ditch Witch

® JT2720 Ditch Witch

® JT2720M1


Drill Stem

UT2720M1DP Drill Pipe 2.375" X 3M Long Mach 1 only

Saver Sub

UT2720M1DC Saver Sub / Drive Chuck

Transition Sub



UT149549* O- Ring


Locking Collar



Sonde Housing


® 7-Hole

Subsite F1-600 Box









® 5-Hole




UT260035005


UT260035005


UT260035005


UT260035005


® 6-Hole




Ditch

Witch

® J

T27

20

M1


Ditch Witch

® JT2720M1


Housing Savers

UT250050110 Tail Piece DW EZ-2 Octagon (B) x

2.375" API Reg. (P) Fits UT260035015

UT260035005

UTD2720M1SHSUB Tail Piece DW 2720M1 Pipe (P) x

F1-600 (P) - Direct Connect Fits UT226638001SS

UTF1PX2720M1EZ2B Tail Piece DW EZ-2 Octagon (B) x

F1-600 (P) Fits UT226638001SS

Rod Wipers



Track

UT2720M1TRACK Rubber Track Verify Specs


ch W

itch

® J

T2720M

1


Ditch Witch

® JT2720M1 Ditch Witch

® JT3020M1


Drill Stem

UT3020DP Drill Pipe 2.375" X 3M Long Mach 1

Saver Sub


Transition Sub

UT3020M1EZ3A EZ Connect 3 Assembly Includes Parts with Asterisk (*)


UT149548* O- Ring

UT260025110* Retainer Bolt 3/8" x 16 x 3/4" Socket Head Cap Screw

Locking Collar



Sonde Housing


® 5-Hole




UT260035005


UT260035005


UT260035005


UT260035005


® 6-Hole



Housing Savers

UT250050115 Tail Piece DW EZ-3 Octagon (B) X 2.375"

API REG (P) Fits UT260035015

UT260035005

Rod Wipers



Track

UT3020M1TRACK Rubber Track 322598


Ditch

Witch

® J

T30

20

M1


Ditch Witch

® JT4020


Drill Stem

UT4020DP Drill Pipe 2.875" X 4.5M Long

Saver Sub

UT4020DC Saver Sub / Drive Chuck

Transition Sub


UT4020TR* EZ Connect 2 Transition Sub Only Chrome Moly Steel

UT149041* O- Ring


Locking Collar



Sonde Housing

UT260035015 3.250" Dia. Side Load Ditch Witch® 5-Hole



UT260025100 Bolt for Housing Cover 1/2"-13 x 3/4" 3 Required for UT260035015 UT260035005

UT260025110 Safety Bolt for Housing Cover 3/8"-16 x 3/4" 1 Required for UT260035015 UT260035005

UT260027000 Fluid Nozzle 1/8" Heat Treated Fits UT260035015 UT260035005


UT260035005 3.250" Dia. Side Load Ditch Witch® 6-Hole



Housing Savers

UT4020EZ2TP Tail Piece DW EZ-2 Octagon (B) X 2.375" API REG (P)

UT4020DCTP Tail Piece DW 4020 Pipe (P) X 2.375" API REG (P)

Direct Connect

Rod Wipers



UT130604 Carriage Chain Early Models #140-2

297 Pitches 1/2" Pins

UT130606 Conn Link Early Models #140-2 2 Required


Dit

ch W

itch

® J

T4020


Ditch Witch

® JT4020M1


Drill Stem

UT4020M1DP Drill Pipe 2.875" X 4.5M Long

Saver Sub


Transition Sub



UT149041* O- Ring


Locking Collar



Sonde Housing


® 5-Hole




UT260035005


UT260035005


UT260035005


UT260035005


® 6-Hole




Ditch

Witch

® J

T40

20

M1


Ditch Witch

® JT4020M1

Dit

ch W

itch

® J

T4020M

1


Housing Savers

UT250050125 Tail Piece DW EZ-2 Octagon (B) X 2.375"

API REG (P)

UT4020M1DCTP Tail Piece DW 4020M1 Pipe (P) X 2.375"

API REG (P) Direct Connect

Jaw Dies

UT350446 Jaw Die Insert

Rod Wipers


Track





Drill Stem

UT7020DP Drill Pipe 3.50" X 4.5M Long Fits JT7020/M1, JT8020M1, JT100M1

Saver Sub

UT7020DC Saver Sub / Drive Chuck Fits JT7020/M1, JT8020M1, JT100M1

Sonde Housings

UT425X6SH 4.25" Dia. Side Load Ditch Witch® 6-Hole

Subsite 2 7/8" API Reg. Box

(20mm SHCS)

UT425X6SHC Cover Sonde Housing

UT9540004 Bolt for Housing Cover 2 Required

UT9540008 Bolt for Housing Cover 1 Required

UT9540281 Nozzle - Replaceable

Housing Savers

UT425X6SHTP Tail Piece 2.875" API Reg. (P) x DW 3.27-4 Pipe (P)

Direct Connect

Rod Wiper



UT130332 Carriage Chain Special DC Chain 265

Pitches RLEE JT7020 160W-2

Jaw Dies

UT319856 Jaw Die Insert

Track

UT100M1TRACK Rubber Track JT100M1


Ditch Witch® JT7020/

JT8020M1/JT100M1

Ditch

Witch

® J

T70

20

/JT

80

20

M1

/JT

10

0M

1


Vermeer® D6x6

Vermeer® D7x11, D7x11A,

D7x11S2, D9x13S2


Drill Stem

UTHI222394DP 1.315" OD .179" Wall x 6' Long F1 F1 - #200

Sub Saver

UT296276507 Integral Sub 1.66" F1

Starter Rod

UT260030010 1.66" x 20" Long F1 Hex 1.625" LPT Chrome Moly Steel

UT260010010 1.66" x 20" Long F1 Hex 1.625" LPT High Strength Nickel Chrome Moly Steel

Locking Collar

UT260060100 Collar Plain Hex 2.00" I.D.

UT260060105 Collar Hardfaced Hex 2.00" I.D.

UT260060107 Collar Carbide Button Hex 2.00" I.D.

UT260025110 Socket Head Cap Screw .375"-16 x .750"

Sonde Housing

UT260025030 2.625" Dia. Side Load Vermeer® Pattern 2.00" API IF Box

UT260025035 Cover 2.625" Sonde Housing Fits UT260025030



UT260025100 Bolt for Housing Covers 1/2"-13 x 3/4" 2 Req. for UT260025030

UT260025020

UT260025110 Safety Bolt for Housing Covers 3/8"-16 x 3/4"

1 Req. for UT260025030 UT260025020


UT260025020


UT234786001 2.750" Dia. Side Load Vermeer® Pattern F1-600 Box

UT9540009 Cover Sonde Housings Fits UT234786001

UT381638SHCSP Bolt for Housing Cover 3/8" -16 x 3/8" Sm. for UT234786001

UT58SH121334TP Bolt for Housing Cover 1/2"-13 x 3/4" (5/8" Shldr)

Lg. for UT234786001

UTSDBS Bolt Set for Housing Cover 1 of each Required (Small & Large Bolts)

UTSONDNOZ 3-Port Fluid Nozzle 1/8" Fits UT234786001

Housing Savers

UT250055100 Tail Piece 1.625" LP Hex (P) x 2.00" API IF (P)

Fits UT260025030 UT260025020

UT7X11TP Tail Piece 1.625" LP Hex (P) x F1-600 (P) Fits UT234786001

Rod Wipers

UT235920 Rod Wiper Standard 1.32" Mid-Body Pipe

UT235921 Rod Wiper Standard 1.66" Mid-Body Pipe

UT235921HD Rod Wiper Heavy Duty 1.66" Mid-Body Pipe

Track

UTD6X6TRACK Rubber Track


Ver

mee

r® D

6x6



D7x11S2, D9x13S2


Drill Stem


Drive Chuck

UT420015001 Flange only 1.66" F1

UT420015001A Assembly 1.66" F1 Complete with Sub Saver Includes: UT420015001 UT420002500

UT235737001 Bolt Drive Chuck 1/2"-13 x 1 1/4" Gr.8

UT72897001 O-Ring

Sub Saver

UT420002500 1.66" F1

UT420002505 Integral Sub 1.66" F1 D7x11 Series 2 / D9x13 Series 2

Starter Rod

UT260030010 1.66" x 20" Long F1 Hex 1.625" LPT Chrome Moly Steel

UT260010010 1.66" x 20" Long F1 Hex 1.625" LPT High Strength Nickel Chrome Moly Steel

Locking Collar





Housing Savers

UT250055100 Tail Piece 1.625" LP Hex (P) x 2.00" API

IF (P) Fits UT260025030

UT260025020


UT226638001

Jaw Dies

UT9874 Stationary Side 1.66" 2 Req. (236076001)

UT9874C Cylinder Side 1.66" 2 Req. (236090001)


Verm

eer® D

7x

11, D

7x11

A, D

7x11

S2

, D9x

13

S2



Sonde Housings






UT260025020

UT260025110 Safety Bolt for Housing Covers 3/8"-16 x 3/4" 1 Req. for UT260025030

UT260025020


UT260025020


UT260025020




UT226638001


UT226638001

UT58SH121334TP Bolt for Housing Cover 1/2"-13 x 3/4" (5/8"

Shldr) Lg. for UT234786001

UT226638001




UT226638001

Rod Wipers

UT235921 Rod Wiper Standard

UT235921HD Rod Wiper Heavy Duty


UT219122147 BL644 147 Pitches with Male Ends D7x11

UT219122223 BL644 223 Pitches with Male Ends D7x11

UT218252147 BL666 147 Pitches with Male Ends D7x11A

UT218252223 BL666 223 Pitches with Male Ends D7x11A

UT231766032 60H-2 Chain 32 Pitches w/Connecting Link D7x11 / D7x11A (rotary drive)

Track

UTD7X11ATRACK Rubber Track D7x11A - Verify Specs

UTD7X11S2TRACK Rubber Track D7x11S2 - Verify Specs

UTD9X13S2TRACK Rubber Track D9x13S2



D7x11S2, D9x13S2

Ver

mee

r® D

7x11

, D

7x11

A,

D7x11

S2

, D

9x

13

S2



Drill Stem


Drive Chuck

UT420001505 Flange Only 1.66" F1



UT72898001 O-Ring

Sub Saver

UT420002500 1.66" F1

UT296276507 Integral Sub 1.66" F1 D10x14

Starter Rod

UT260030010 1.66" x 20" Long F1 x 1.625" LPT Hex Chrome Moly Steel

UT260010010 1.66" x 20" Long F1 x 1.625" LPT Hex High Strength Nickel Chrome Moly Steel

Locking Collar





Housing Savers

UT250055100 Tail Piece 1.625" LP Hex (P) x 2.00" API IF (P) Fits UT260025030

UT260025020


UT226638001

Jaw Dies

UT9874 Stationary Side 1.66" Pipe 2 Required

UT9874C Cylinder Side 1.66" Pipe 2 Required


Vermeer® D10x14, D10x15

Verm

eer® D

10x

14

, D10

x1

5



Sonde Housings






UT260025020


UT260025020


UT260025020


UT260025020




UT226638001


UT226638001

UT58SH121334TP Bolt for Housing Cover 1/2"-13 x 3/4"

(5/8" Shldr) Lg. for UT234786001

UT226638001




UT226638001

Rod Wipers

UT235921 Rod Wiper Standard

UT235921HD Rod Wiper Heavy Duty


UT96676174 BL844 174 Pitches M/F Ends D10x15

UT96676254 BL844 254 Pitches Includes C/L D10x15

Track

UTD10X15TRACK Rubber Track


Vermeer® D10x14, D10x15

Ver

mee

r® D

10x14,

D10x15


D16x20S2, D18x22, D20x22, D20x22S2



Drill Stem



Drive Chuck

UT420001510 Flange Only 1.900" F1


UT420001525 Flange Only 2.062" F1



UT72897001 O-Ring

Sub Saver

UT420002520 1.900" F1

UT420002525 2.062" F1

UT296291966 Integral Sub 1.900" F1 D16x20 Series 2

UT296281195 Integral Sub 2.062" F1 D20x22 Series 2

Starter Rod

UT260030005 1.900" F1 x 2.125" LPT Hex Chrome Moly Steel


UT260010005 1.900" F1 x 2.125" LPT Hex High Strength Nickel Chrome Moly Steel


UT260010230 2.062" F1 x #350 Hawkeye Octagon Chrome Moly Steel

Locking Collar




UT260060159 Collar Shark Teeth Hex 2.50" I.D.

UT260060160 Collar Plain Octagon 2.625" I.D. use with

UT260010230

UT260060165 Collar Hardfaced Octagon 2.625" I.D. use with

UT260010230


UT260025110 Socket Head Cap Screw .375" - 16 x .750"

Track

UTD16X20ATRACK Rubber Track D16x20A





D16x20S2, D18x22, D20x22, D20x22S2

Verm

eer® D

16

x2

0, D

16

x2

0A

, D1

6x

20

S2

, D1

8x2

2, D

20x

22

, D2

0x

22

S2



Sonde Housings

UT260025020 2.750" Dia. Side Load Vermeer®

Pattern 2.00" API IF Box







Pattern F1-600 Box


Pattern F1-600 Box


UT226638001


UT226638001


(5/8" Shldr) Lg. for UT234786001

UT226638001




UT226638001

Housing Savers

UT250055200 Tail Piece 2.125" LPT Hex (P) x 2.00" API

IF (P) Fits UT260025020

UT250050055 Tail Piece #350 Hawkeye Octagon (P) x

2.00" API IF (P) Fits UT260025020

UT6002125TP Tail Piece 2.125" LPT Hex (P) x FS600 (P) Fits UT234786001

UT226638001

Jaw Dies

UT9875 Stationary Side 1.900" Pipe D16x20/D16x20A 2 Req.

(236111001)

UT9875C Cylinder Side 1.900" Pipe D16x20/D16x20A 1/2 Req.

(236112001)

UT250272001 Cylinder Side 1.900" Pipe with guide D16x20/D16x20A 1 Req.

UT296279701 Stationary Side 2.06" Pipe D16x20S2 2 Required

UT296279702 Cylinder Side 2.06" Pipe D16x20S2 1 Required

UT296279704 Cylinder Side 2.06" Pipe with guide D16x20S2 1 Required

Rod Wipers




UT96676174 BL844 174 Pitches M/F Ends D16x20/D16x20A

UT96676254 BL844 254 Pitches Includes C/L D16x20/D16x20A


Ver

mee

r® D

16x20,

D16x20A

, D

16x

20

S2

, D

18

x2

2,

D2

0x

22

, D

20

x2

2S

2


D16x20S2, D18x22, D20x22, D20x22S2



Drill Stem


Drive Chuck

UT2962797071 Flange Only 2.062" F1

UT2962797091 Assembly 2.062" F1 Complete with Sub Saver Includes: UT2962797071 UT2962797081

UT235721001 Bolt Drive Chuck 1/2" x 1 1/2" Gr.8

UT72897001 O-Ring #24 Sq.

Sub Saver

UT2962797081 2.062" F1

Starter Rod



UT260010230 2.062" F1 x #350 Hawkeye®

Octagon Chrome Moly Steel

Locking Collar






UT260010230


UT260010230




Verm

eer® D

24

x2

6


D16x20S2, D18x22, D20x22, D20x22S2 Vermeer® D24x26



Sonde Housings


Pattern 2.00" API IF Box







Pattern F1-600 Box


Pattern F1-600 Box


UT226638001


UT226638001


(5/8" Shldr) Lg. for UT234786001

UT226638001




UT226638001

Housing Savers


IF (P) Fits UT260025020

UT250050055 Tail Piece #350 Hawkeye Octagon (P) x

2.00" API IF (P) Fits UT260025020


UT226638001

Jaw Dies

UT9879 Stationary 2.062" Pipe 4 Required

Rod Wipers



UT238741164 BL866 Chain 164 Pitches D24 only

UT86104253 BL866 Chain 253 Pitches Male Ends D24 only


Ver

mee

r® D

24x26

Vermeer® D24x40, D24x40A

D24x40S2 Vermeer

® D24x26



Drill Stem

UTHI222276DP 2.375" OD .254" Wall x 10' Long F1 - #600

Drive Chuck

UT420001540 Flange Only 2.375" F1

UT420001540A Assembly 2.375" F1 With Sub Saver 383 & Below

Includes: UT420001540 UT420002540

UT420001540B Assembly 2.375" F1 With Sub Saver 384 & Above

Includes: UT420001540 UT420002545

UT420001540S2 Assembly 2.375" F1 With Sub Saver Series 2

Includes: UT420001540 UT420002546

UT24033001 Bolt Drive Chuck 1/2" - 13 x 1 3/4"

UT72898001 O - Ring

Sub Saver

UT420002540 2.375" F1 S/N 383 & Below 7.5" OAL

UT420002545 2.375" F1 S/N 384 & Above 9.5" OAL

UT420002546 2.375" F1 Series 2 12" OAL

UT24X40SS-4 2.375" F1 6.5" OAL

Starter Rod



UT260010220 2.375" F1 x #350 Hawkeye Octagon Chrome Moly Steel

Locking Collar






UT260010220


UT260010220




Verm

eer® D

24

x4

0, D

24

x4

0A

, D2

4x

40

S2

Vermeer

® D24x40, D24x40A

D24x40S2



Sonde Housings

UT260025000 3.250" Dia. Side Load Vermeer® Pattern 2.375" API Reg Box

UT260025001 3.50" Dia. HD Side Load Vermeer

® Pattern

(5/8"-11 Bolts) 2.375" API Reg Box


UT260025001


UT260025001


UT260025001


UT260025001


UT260025001


Pattern F1-600 Box


Pattern F1-600 Box


UT234810001


UT234810001


(5/8" Shldr) Lg. for UT226638001

UT234810001




UT234810001

Housing Savers


Reg (P) Fits UT260025000

UT260025001

UT250050050 Tail Piece #350 Hawkeye Octagon

(P) x 2.375" API Reg (P) Fits UT260025000

UT260025001


UT234810001

Jaw Dies

UT9872 Jaw Die Stationary 2.735" Pipe 4 Req. (230831001)

UT70003 Jaw Block only

UT7077ST Jaw Die Insert only Use with UT70003

Note: See Geo-Bore/Terra-Bore Section for Additional Heavy-Duty Housing Options - Pgs. 44-45. Ver

mee

r® D

24x40,

D24x40A

, D

24x

40

S2

Vermeer® D24x40,

D24x40A D24x40S2



Rod Wipers




UT86104163 BL866 Chain 163 Pitches D24x40

UT86104253 BL866 Chain 253 Pitches Male Ends D24x40

UT245009165 BL866 Chain 165 Pitches Male Ends D24x40A

UT86104257 BL866 Chain 257 Pitches Male Ends D24x40A

Track




Verm

eer® D

24

x4

0, D

24

x4

0A

, D2

4x

40

S2

Vermeer

® D24x40,

D24x40A D24x40S2


Vermeer® D33x44


Drill Stem






Drive Chuck

UTHI284143 Flange Only 2.375" F2

UTHI284142 Assembly 2.375" With Sub Saver F2 Includes: UTHI284143 UTHI284144

UT296309649 Flange Only 2.375" F1

UT296309648 Assembly 2.375" With Sub Saver F1 Includes: UT296309649 UT420002547

Sub Saver

UTHI284144 2.375" F2

UT420002547 2.375" F1

Starter Rod

UTHI284148 2.375" F2 x 2.125" LPT Hex Chrome Moly Steel


Locking Collar







Housing Savers

UT250050005 Tail Piece 2.125" LPT Hex (P) x 2.375" API Reg (P)

Fits UT260025000 UT260025001

UT6002125TP Tail Piece 2.125" LPT Hex (P) x FS600 (P) Fits UT226638001 UT234810001

Jaw Dies

UT70003 Jaw Block only 2.375" Pipe

UT7078ST Jaw Die Insert 2.375" Pipe

UT276415 Jaw Die Stationary 2.375" & 2.625" Pipe


Ver

mee

r® D

33x44


Vermeer® D33x44


Rod Wipers




Sonde Housings


Pattern 2.375" API Reg Box

UT260025001 3.50" Dia. HD Side Load Vermeer®

Pattern (5/8"-11 Bolts)

2.375" API Reg Box

UT260025005 Cover Sonde Housings Fits UT260025000 UT260025001

UT260025100 Bolt for Housing Covers 1/2"-13 x 3/4" 2 Req. for UT260025000 UT260025001

UT260025110 Safety Bolt for Housing Covers 3/8"-16 x 3/4" 1 Req. for UT260025000 UT260025001




Pattern F1-600 Box


Pattern F1-600 Box


UT381638SHCSP Bolt for Housing Cover 3/8" -16 x 3/8" Sm. for UT226638001 UT234810001


Lg. for UT226638001 UT234810001

UTSDBS Bolt Set for Housing Cover 1 of each Required (Small & Large Bolt)

UTSONDNOZ 3-Port Fluid Nozzle 1/8" Fits UT226638001 UT234810001

Track

UTD33X44TRACK Rubber Track D33x44


Verm

eer® D

33

x4

4


Vermeer® D36x50, D36x50S2


Drill Stem

UTHI294566DP 2.375" OD .295" Wall x 10' Long F2 - #602 (S/N 101-473)



UTHI296309599DP 2.375" OD .295" Wall x 10' Long F1 - #650 (Series 2 S/N 474 & Up) & Conversions

UTHI296312531DP 2.375" OD .295" Wall x 15' Long F1 - #650 (Series 2 S/N 474 & Up) & Conversions

UTHI296309521 2.625" OD .400" Wall x 10' Long F1 - #700 (Series 2 S/N 474 & Up) & Conversions

UTHI296309522 2.625" OD .400" Wall x 15' Long F1 - #700 (Series 2 S/N 474 & Up) & Conversions

Drive Chuck



UT296309649 Flange Only 2.375" F1


UT296309506 Flange Only 2.625" F1


Sub Saver

UTHI284144 2.375" F2

UT420002547 2.375" F1

UT420002548 2.625" F1

Starter Rod

UTHI284148 2.375" F2 x 2.125" LPT Hex Chrome Moly Steel



Locking Collar







Housing Savers

UT250050005 Tail Piece 2.125" LPT Hex (P) x 2.375" API Reg (P)

Fits UT260025000 UT260025001

UT6002125TP Tail Piece 2.125" LPT Hex (P) x FS600 (P) Fits UT226638001 UT234810001


Ver

mee

r® D

36x50,

D36x50S

2


Vermeer® D36x50, D36x50S2


Sonde Housings


Pattern 2.375" API Reg Box

UT260025001 3.50" Dia. HD Side Load Vermeer®


2.375" API Reg Box


UT260025100 Bolt for Housing Covers 1/2"-13 x 3/4" 2 Req. for UT260025000 UT260025001

UT260025110 Safety Bolt for Housing Covers 3/8"-16 x 3/4" 1 Req. for UT260025000 UT260025001




Pattern F1-600 Box


Pattern F1-600 Box


UT381638SHCSP Bolt for Housing Cover 3/8" -16 x 3/8" Sm. for UT226638001 UT234810001


Lg. for UT226638001 UT234810001

UTSDBS Bolt Set for Housing Cover 1 of each Required (Small & Large Bolt)

UTSONDNOZ 3-Port Fluid Nozzle 1/8" Fits UT226638001 UT234810001

Jaw Dies

UT276415 Jaw Die Stationary 2.375" & 2.625" F2 Pipe (not F1 - #700)

UT296310768 Jaw Die Stationary 2.625" Pipe (F1 - #700)

Rod Wipers




Track



Verm

eer® D

36

x50

, D36

x5

0S

2




Drill Stem



Drive Chuck

UT420001550 Flange Only 2.875" F1

UT420001550A Assembly 2.875" With Sub Saver F1 Includes: UT420001550 UT420002550

UT420001555 Flange Only 3.500" F1


Sub Saver

UT420002550 2.875" F1

UT420002555 3.500" F1

Sonde Housings



2.875" API IF Box

UT260025005S Cover Sonde Housing

UT260025100 Bolt for Housing Cover 1/2"-13 x 3/4" 2 Req.

UT260025110 Safety Bolt for Housing Cover 3/8"-16 x 3/4"

1 Req.

UT260027005 Replaceable Fluid Nozzle (Heat Treated) 3/16"

Housing Savers

UT220500900 Tail Piece 2.875" API IF (P) x 2.875" FS1 (B)

D/C


D/C

Jaw Dies

UT9871 Jaw Die 2.875" Pipe

UT9870 Jaw Die 3.500" Pipe

UT1601 Vise Jaw Insert only 3.500" Pipe


Ver

mee

r® D

50x100,

D50x100A




Rod Wipers




UT86104233 BL866 Matched Set 233 Pitches Each Male Ends

D50x100 (2 Chains)


D50x100 (2 Chains)


D50x100A (2 Chains) - UT86104233


D50x100A (2 Chains) - UT86104363

Track




Verm

eer® D

50

x1

00

, D5

0x

10

0A


Vermeer® D55x100, D75x100,

D80x100, D80x100S2


Drill Stem




Drive Chuck

UT284097001 Flange Only 2.875" F2

UT284094001 Assembly 2.875" With Sub Saver F2 Includes: UT284097001 UTHI284098

UT420001550 Flange Only 2.875" F1


UT420001555 Flange Only 3.500" F1


UT80X100DC Drive Chuck One Piece 3.500" F1

Sub Saver

UTHI284098 2.875" F2

UT420002550 2.875" F1

UT420002555 3.500" F1

Sonde Housings



2.875" API IF Box




1 Req.


Housing Savers

UT278APIIFPX278F2B Tail Piece 2.875" API IF (P) x 2.875" FS2 (B)

D/C


D/C


D/C


Ver

mee

r® D

55x100,

D75x100,

D8

0x

10

0,

D8

0x

10

0S

2



D80x100, D80x100S2


D80x100, D80x100S2


Jaw Dies

UT9871 Jaw Die 2.875" F1 Pipe

UT9870 Jaw Die 3.500" F1 Pipe

UT1601 Vise Jaw Insert only 3.500" F1 Pipe

Rod Wipers





UT283589185-9/16 HL1266 Matched Set 185 Pitches Each Male Ends 9/16" Pins

D80x100

UT283590301-9/16 HL1266 Matched Set 301 Pitches Each Male Ends 9/16" Pins

D80x100

Track

UTD80X100TRACK Rubber Track D80x100 - Verify Specs



Verm

eer® D

55

x1

00

, D7

5x1

00, D

80

x1

00, D

80

x10

0S

2



Drill Stem



Drive Chuck



Sub Saver

UTHI299030865 2.875" F1

Sonde Housings



2.875" API IF Box




1 Req.


Housing Savers


D/C

Rod Wiper


Track

UTD60X90S2TRACK Rubber Track D60x90S2 - Verify Specs


Ver

mee

r® D

60x90S

2

Vermeer® D60x90S2



D100x120S2


Drill Stem


UTHI296309520 3.500" OD .476" Wall x 20' Long F1 - #1000 (S/N 405 & Above use F1)

Drive Chuck

UTHI293161001 Drive Chuck One Piece 3.500" F2





Sub Saver

UTHI296255396 3.500" F2

UTHI296309515 3.500" F1

Sonde Housings



2.875" API IF Box




1 Req.

UT260027005 Replaceable Fluid Nozzle

(Heat Treated) 3/16"

Housing Savers

UT278APIIFPX312F2B Tail Piece 2.875" API IF (P) x 3.500"

FS2 (B) D/C

UT220501000 Tail Piece 2.875" API IF (P) x 3.500"

FS1 (B) D/C

Rod Wipers



Track



Verm

eer® D

80

x1

20, D

100

x1

20, D

10

0x

12

0S

2


Geo-Bore Sonde Housings

Heavy-Duty End & Side Load Housings

Underground Tools offers the largest variety of Heavy-Duty Sonde Housings on the market today. No matter what ground conditions you encounter or if you're drilling or using a mud motor these housings will virtually guarantee your success. Our universal, single-piece constructed housings are built to withstand the most severe HDD applications.

Part No. Size/Dia. Length Connection Specs Sonde Access

UTD273 2.50" 23" 2" API IF Box (fwd) x 2" API IF Box (rear) End Load

UTD213 3.25" 27" 2 3/8" API Reg Box (fwd) x 2 3/8" API Reg Box (rear) End Load

UTD2213 3.25" 27" 2 3/8" API Reg Box (fwd) x 2 3/8" API Reg Box (rear) Side Load

UTD285 3.25" 31" 2 3/8" API Reg Box (fwd) x 2 3/8" API Reg Box (rear) End Load

UTD2285 3.25" 31" 2 3/8" API Reg Box (fwd) x 2 3/8" API Reg Box (rear) Side Load

UTD287 3.86" 31" 2 3/8" API Reg Box (fwd) x 2 3/8" API IF Box (rear) End Load

UTD2287 3.86" 31" 2 3/8" API Reg Box (fwd) x 2 3/8" API IF Box (rear) Side Load







Geo-Bore Housing Features & Benefits: High Flow - Dissipates heat while drilling to help keep electronics cool - Delivers mud volume required for drilling or mud motors Nickel Chrome Moly Alloy Steel - Extended wear life, Abrasion & Impact resistant Internally Sealed Indexing Cartridge - Eliminates drilling fluid contamination - Clocks transmitter quickly to 12 o'clock End & Side Load / Box x Box - Provides maximum flexibility in the field Epoxy Filled Transmitter Slots - Keeps transmitter & chamber clean from cuttings - Chamber sealed to over 2500 PSI fluid pressure Wire Line Capable - Universal housing offers additional flexibility and options

Geo

-Bo

re S

on

de

Hou

sin

gs


Terra-Bore Sonde Housings

Part No. Size/Dia. Connection Specs Sonde Access

UT100042278 4.25" 2 7/8" API Reg Box (fwd) x 2 7/8" API IF Box (rear) End



UT100070550 7.00" 4 1/2" API Reg Box (fwd) x 5 1/2" Full Hole (rear) End

Terra-Bore Housing Features & Benefits: High Flow - Dissipates heat while drilling to help keep electronics cool - Delivers mud volume required for drilling or mud motors Manufactured from Nickel Steel - (170,000# Ten. Str.) maximum wear life Single piece construction, manufactured from a solid billet of nickel steel - Superior impact resistance, unmatched performance in severe conditions Sealed Indexing Cartridge - Eliminates drilling fluid contamination - Clocks transmitter quickly to 12 o'clock Epoxy Filled Transmitter Slots - Keeps transmitter & chamber clean from cuttings

Terra

-Bo

re So

nd

e Hou

sing

s


Geo-Bore Pilot Bits Bog Hog - Conical Steering Head

Designed for the following ground conditions: Glacial Till, Clays, Soft Boggy Soils, Compacted Soils and Hard Conglomerates.

Part No. Size/Dia. Connection Spec

UTD303 3.5" 2" API IF Pin

UTD450 4.0" 2" API IF Pin

UTD258 4.0" 2-3/8" API Reg Pin







Duro Bore - All Soils Bit

Designed for the following ground conditions: Adverse formations such as, Cobbles, Fractured Shales, Caliche, and Compacted Soils.

Part No. Size/Dia. Steering Flat Connection Spec

UTD279 4.0" 12 Degrees 2" API IF Pin

UTD208 4.0" 12 Degrees 2-3/8" API Reg Pin







Great steering control in soft ground, ability to achieve tight radius turns and line & grade accuracy 25 degree steering angle Replaceable fluid nozzles Heat treated tool steel body - Resists abrasion Solid tungsten carbide cutting edges

11-18 degree steering angles Designed for long life in production drilling application Replaceable fluid nozzles Heat treated tool steel body - Resists abrasion Solid tungsten carbide cutting edges Available in 4", 5", 6" & 8" diameters

Geo

Pil

ot

Bit

s


Geo-Bore Pilot Bits

Quick Steer - Adverse Soils Bit

Designed for the following ground conditions: Adverse geologies; hard conglomerates glacial till, clays and compacted soils.


















18/20 degree steering angles Replaceable fluid nozzles Heat treated tool steel body - Resists abrasion Solid tungsten carbide cutting edges Available in 4.5", 5.5" & 6.5" diameters

18 degree steering angles For tight radius turns and line & grade accuracy Replaceable fluid nozzles Heat treated tool steel body - Resists abrasion Solid tungsten carbide cutting edges Available in 3.5", 4.5", 5.5" & 6.5" diameters

Duro Spade - Adverse Soils Bit

Designed for the following ground conditions: Adverse geologies; compacted soils, glacial till, hard conglomerates and clays.

Geo

Pilo

t Bits


Tooling Applications - Backreamers Backreamer Application Chart

Soil Classification Sandy Soft Medium Hard Rocky

Soft

Rock

Medium

Rock

Hard

Rock

Reamer Description

Fluted Reamer - Solid Body 4 2 2 1 1 3 4 5

Solid Plate Spiral Fluted Reamer 5 3 3 2 1 1 2 4

Ground Hawg Reamer 3 2 2 1 3 2 5 5

Sir Mixalot Reamer 2 1 1 2 4 5 5 5

Winged Reamer 5 4 3 2 1 2 3 5

Sand Shark Reamer 1 2 2 3 5 3 5 5

Taper Barrel Reamer 4 4 3 3 2 4 5 5

Hole Opener - TCI Cones 5 5 4 3 2 2 1 1

Hole Opener - Mill Tooth Cones 5 5 3 2 3 1 2 4

Barrel / Compactor Reamer Does not apply as an independent tool - see backreamer section for application details

1 = Best 2 = Good 3 = Fair 4 = Less Recommended 5 = Not Recommended

Soil Classification

Sandy Soil Sugar Sands, Sandy Loams or any soil with sand as the dominant soil characteristic

Soft Soil Loam, Silt, Clay, soft to medium soils that posses limited moisture content

Medium Soil Semi-compacted soils; Clays, Loams

Hard Soil Compacted soils; Hardpan, Dry Clays, Gumbo

Rocky Soil Cobble, Rip Rap, Chunk Rock, Gravel, Glacial Till, any fragmented type of rock

Soft Rock Soft Limestone, Caliche, Sandstone, Shale, Coral (up to approximately 8500 psi)

Medium Rock Medium Limestone, Certain Dolomite, Shale, Coral (between Approximately 8500 psi - 15,000 psi)

Hard Rock Granite, Hard Limestone, Schist, Marble, Trap Rock, Quartzite (any soil condition above 15,000 psi)

Note: All charts presented in this catalog are to be used as reference guides only. Soil conditions may vary during the boring process and several other factors unrelated to soil conditions will also directly affect pilot bit and backreamer performance. Contact the DirtSmart

® Technical Support Staff at Underground Tools,

Inc. or your local UTI dealer for more detailed information regarding soil conditions and pilot bit and/or backreamer recommendations.

Underground Tools, Inc. offers a Complete Lineup of HDD Backreamers for all soil conditions. Our reamers are manufactured using only the best abrasion and impact resistant steels and carbides. State-Of-The-Art machining and fabrication methods create tools that will maximize your drill rig's production capabilities and extend overall wear life.

Ba

ckre

am

ers


Solid Body Fluted Backreamers

Solid-body construction equates to greater strength and significantly longer life than competitors hollow body designs. Machined from a solid billet of tool steel and then heat treated; this reamer simply outperforms all other fluted reamers on the market. Performs great in a wide variety of ground conditions by cutting, mixing/pumping and packing all at the same time.

Solid Body Spiral Fluted Reamer with Shark or Conical Teeth - API REG. Box Forward

Item No.

Nominal Cut

Diameter Pack

Diameter Description (See Notes & Swivel Matrix)

UT250002045 4.5" 4.0" 2-3/8" API REG (B) w/ Brazed Conical

UT250002006 6" 5.0" 2-3/8" API REG (B) w/ Shark Teeth

UT250002106 6" 5.0" 2-3/8" API REG (B) w/ Rotary Teeth









Note: 1) Many other thread styles and sizes are available - API REG, API IF, OEM Drill Rod Threads, Quick Conn. & More.

Static Lug Pulling Eye/Pin

Built-In Swivel

Built-In Swivel

Built-In Swivel

Built-In Swivel

Built-In Swivel

Built-In Swivel

Standard Part No. (AA) (A) (D) (E) (B) (C)

Connection and Built-In Swivel Matrix for Trailing End of Reamer

Note: * When requesting a reamer with a built-in swivel or other trailing end connection, use the indicated letter code as a suffix to the Item Number; i.e., UT250002012D would be a 12" Reamer with a built-in 60,000 lb. swivel.

(Replaceable Fluid Ports in 12" & 14" Sizes Standard)

Ba

ckrea

mers


Item No. Nominal Cut

Diameter Pack

Diameter Description (See Notes and Coupling Chart)

UT250002045 4.5" 4.0" 2" IF (Box x Box) w/ Conical Teeth

UT250002006 6" 4.5" 2" IF (Box x Box) w/ Shark Teeth

UT250002106 6" 4.5" 2" IF (Box x Box) w/ Rotary Teeth

UT250002008 8" 6.0" 2-3/8" REG (Box x Box) w/ Shark Teeth

UT250002108 8" 6.0" 2-3/8" REG (Box x Box) w/ Rotary Teeth







Solid Body Spiral Fluted Reamer with Shark or Conical Teeth - Box x Box (Replaceable Fluid Ports in 12" & 14" Sizes Standard)

Solid Body Fluted Backreamers

New Forward and Rear Connection Platform for Backreamers

Note: * Choose Front and Rear Reamer Couplings (adapters/crossovers, drawbars, direct connect swivels) from Reamer Coupling Chart on Page Numbers 66 & 67.

14” cut, solid-body fluted reamer package shown with conical carbide teeth, integrated maxi swivel and custom nose piece adapter.

Ba

ckre

am

ers


HD Stacked Plate Spiral Backreamers

Solid-body construction with a gradual taper and deep flute design provide smooth cutting and maximum mixing performance. Heavy-duty V-Faced carbide teeth and extensive hardfacing complement this solid steel reamer and allow it to perform extremely well in the toughest of ground conditions, such as; rock, cobble, chunk rock and various other severe soils.

Stacked Plate Reamer with Shark Teeth - API REG. Box Forward

Size Range: 8" - 54" Dia. Shaft Diameters: 3" - 6.625"



Built-In Swivel

12,000 lb.*

Built-In Swivel

22,000 lb.*

Built-In Swivel

60,000 lb.*

Built-In Swivel

90,000 lb.*

Built-In Swivel

32,000 lb.*

Built-In Swivel

44,000 lb.*




Item No. Cut

Diameter Shaft

Diameter Description

UT290001008 8" 3" 2-3/8" API REG (B)

UT290001010 10" 3" 2-3/8" API REG (B)

UT290001012 12" 3" 2-3/8" API REG (B)

UT290001212 12" 4" 2-3/8" API REG (B)

UT290001014 14" 3" 2-3/8" API REG (B)

UT290001214 14" 4" 2-7/8" API REG (B)

UT290001016 16" 3" 2-3/8" API REG (B)

UT290001216 16" 4" 2-7/8" API REG (B)

UT290001018 18" 3" 2-3/8" API REG (B)

UT290001218 18" 4" 2-7/8" API REG (B)

UT290001020 20" 4" 2-7/8" API REG (B)

UT290001022 22" 4" 2-7/8" API REG (B)

UT290001024 24" 4" 2-7/8" API REG (B)

UT290001026 26" 4" 2-7/8" API REG (B)

UT290001028 28" 4" 2-7/8" API REG (B)

UT290001030 30" 4" 3.500" API REG (B)

UT290001032 32" 4" 3.500" API REG (B)

UT290001034 34" 4" 3.500" API REG (B)

UT290001036 36" 4" 3.500" API REG (B)

Ba

ckrea

mers


Item No.

Nominal Cut

Diameter

Nominal Pack

Diameter Description Shaft

Diameter

UT290002010 10" 8" 2-3/8" REG (Box x Box) w/ Shark Teeth 3.25"


UT290003012 12" 10" 2-7/8" IF (Box x Box) w/ Shark Teeth 4.25"









UT290002022 22" 20" 3.25" 2-3/8" REG (Box x Box) w/ Shark Teeth

UT290003022 22" 20" 4.25" 2-7/8" IF (Box x Box) w/ Shark Teeth

UT290002024 24" 22" 3.25" 2-3/8" REG (Box x Box) w/ Shark Teeth












Stacked Plate Reamer with Shark Teeth - API Box x Box Torque Tube Size Range: 10" - 54" Dia. Shaft Diameters: 3.25" - 6.125"

HD Stacked Plate Spiral Backreamers


* Additional sizes and configurations (extra cutting teeth, bi-directional design, etc.) are available upon request.


Ba

ckre

am

ers


Sir Mixalot Backreamers

The Sir Mixalot Reamers are fabricated from heat treated alloy steel for added strength and durability. The minimal resistant profile and light weight design allow these reamers to efficiently cut and mix in light to medium ground conditions. They quickly produce a flowable slurry that allows for easy pull back.

Sir Mixalot Reamer with Conical Teeth - API REG. Box Forward Size Range: 6" - 48" Dia. Shaft Diameters: 3" - 6.75"

Item No. Cut

Diameter Shaft


UT270001006 6" 3" 2-3/8" API REG (B)

UT270001008 8" 3" 2-3/8" API REG (B)

UT270001010 10" 3" 2-3/8" API REG (B)

UT270002010 10" 4" 2-3/8" API REG (B)

UT270001012 12" 3" 2-3/8" API REG (B)

UT270002012 12" 4" 2-3/8" API REG (B)

UT270001014 14" 3" 2-3/8" API REG (B)

UT270002014 14" 4" 2-3/8" API REG (B)

UT270001016 16" 3" 2-3/8" API REG (B)

UT270002016 16" 4" 2-3/8" API REG (B)

UT270001018 18" 3" 2-3/8" API REG (B)

UT270002018 18" 4" 2-3/8" API REG (B)

UT270001020 20" 3" 2-3/8" API REG (B)

UT270002020 20" 4" 2-3/8" API REG (B)

UT270001022 22" 3" 2-3/8" API REG (B)

UT270002022 22" 4" 2-3/8" API REG (B)

UT270001024 24" 3" 2-3/8" API REG (B)

UT270002024 24" 4" 2-3/8" API REG (B)

UT270001026 26" 4" 2-7/8" API REG (B)

UT270001028 28" 4" 2-7/8" API REG (B)

UT270001030 30" 4" 3.500" API REG (B)

UT270001032 32" 4" 3.500" API REG (B)

UT270001034 34" 4" 3.500" API REG (B)

UT270001036 36" 4" 3.500" API REG (B)



Built-In Swivel

12,000 lb.*

Built-In Swivel

22,000 lb.*

Built-In Swivel

60,000 lb.*

Built-In Swivel

90,000 lb.*

Built-In Swivel

32,000 lb.*

Built-In Swivel

44,000 lb.*




Ba

ckrea

mers


Item No. Nominal Cut

Diameter Shaft


UT270001006 6" 2.75" 2" IF (Box x Box) w/ Conical Teeth



UT270002010 10" 3.25" 2-3/8" REG (Box x Box) w/ Conical Teeth










UT270003020 20" 4.25" 2-7/8" IF (Box x Box) w/ Conical Teeth

















Sir Mixalot Reamer with Conical Teeth - API Box x Box Torque Tube*

Size Range: 6" - 60" Dia. Shaft Diameters: 2.75" - 6.75"


* Additional sizes are available upon request.


Sir Mixalot Backreamers B

ack

ream

ers


Winged Backreamers

Our Winged "rock" style backreamers are designed to cut and mix in some of the toughest ground conditions. Fabricated from heat treated alloy steel with strategically mounted, heavy-duty V-Faced carbide teeth, these reamers will perform excellent at low torque in hard compacted, rocky and soft rock conditions, such as; hardpan, sandstone, fragmented rock and more.

Winged Reamer with Shark Teeth - API REG. Box Forward


Item No. Cut

Diameter Shaft


UT260001008 8" 3" 3-Wing w/ 2-3/8" API REG (B)

UT260001010 10" 3" 3-Wing w/ 2-3/8" API REG (B)

UT260001012 12" 3" 3-Wing w/ 2-3/8" API REG (B)

UT260002012 12" 4" 3-Wing w/ 2-3/8" API REG (B)

UT260001014 14" 3" 3-Wing w/ 2-3/8" API REG (B)

UT260002014 14" 4" 3-Wing w/ 2-3/8" API REG (B)

UT260001016 16" 3" 3-Wing w/ 2-3/8" API REG (B)

UT260002016 16" 4" 3-Wing w/ 2-3/8" API REG (B)

UT260001018 18" 3" 3-Wing w/ 2-3/8" API REG (B)

UT260002018 18" 4" 3-Wing w/ 2-3/8" API REG (B)

UT260001020 20" 3" 3-Wing w/ 2-3/8" API REG (B)

UT260002020 20" 4" 3-Wing w/ 2-3/8" API REG (B)

UT260001022 22" 3" 3-Wing w/ 2-3/8" API REG (B)

UT260002022 22" 4" 3-Wing w/ 2-3/8" API REG (B)

UT260001024 24" 3" 3-Wing w/ 2-3/8" API REG (B)

UT260002024 24" 4" 3-Wing w/ 2-7/8" API REG (B)

UT260001026 26" 4" 3-Wing w/ 2-7/8" API REG (B)

UT260001028 28" 4" 3-Wing w/ 2-7/8" API REG (B)

UT260001030 30" 4" 3-Wing w/ 3.500" API REG (B)

UT260001032 32" 4" 3-Wing w/ 3.500" API REG (B)

UT260001034 34" 4" 3-Wing w/ 3.500" API REG (B)

UT260001036 36" 4" 3-Wing w/ 3.500" API REG (B)

Note: 1) Many other thread styles and sizes are available - API REG, API IF, OEM Drill Rod Threads, Quick Conn. & More. 2) Spider center support and stabilizer ring are standard on 18” and larger reamers.


Built-In Swivel

12,000 lb.*

Built-In Swivel

22,000 lb.*

Built-In Swivel

60,000 lb.*

Built-In Swivel

90,000 lb.*

Built-In Swivel

32,000 lb.*

Built-In Swivel

44,000 lb.*




Ba

ckrea

mers


Item No.

Nominal Cut

Diameter

Nominal Pack

Diameter Shaft


UT260001008 8" N/A 2.75" 2" IF (Box x Box) w/ Shark Teeth



UT260002012 12" N/A 3.25" 2-3/8" REG (Box x Box) w/ Shark Teeth





UT260001018 18" 16.5" 2.75" 2" IF (Box x Box) w/ Shark Teeth

UT260002018 18" 16.5" 3.25" 2-3/8" REG (Box x Box) w/ Shark Teeth


UT260003020 20" 18.5" 4.25" 2-7/8" IF (Box x Box) w/ Shark Teeth

















Winged Reamer with Shark Teeth - API Box x Box Torque Tube



* Additional sizes and configurations (extra wings, cutters, wide stabilizer rings, etc.) are available upon request.


Winged Backreamers B

ack

ream

ers


Ground Hawg Backreamers*

Our Ground Hawg Reamers feature a dense array of brazed conical carbide teeth and produce an aggressive cutting action. The carbides are set at a 20 degree positive lead angle on the alloy steel mounting blocks and then fabricated to the tapered blades (40 degree) to provide the ideal cutting geometry. These reamers are productive at low torque pressures in a wide variety of ground condtions ranging from medium to soft rock formations.

Ground Hawg Reamer with Conical Teeth - API Box x Box Torque Tube


Item No.

Nominal Cut

Diameter

Nominal Pack

Diameter Shaft


UT350001006 6" N/A 2.75" 2" IF (Box X Box) w/ Conical Teeth

UT350001008 8" N/A 2.75" 2" IF (Box X Box) w/ Conical Teeth

UT350002008 8" N/A 3.25" 2-3/8" Reg (Box X Box) w/ Conical Teeth

UT350001010 10.5" 10" 2.75" 2" IF (Box X Box) w/ Conical Teeth

UT350002010 10.5" 10" 3.25" 2-3/8" Reg (Box X Box) w/ Conical Teeth










UT350003020 20.5" 20" 4.25" 2-7/8" IF (Box X Box) w/ Conical Teeth


UT350003024 24.5" 24" 4.25" 2-7/8" IF (Box X Box) w/ Conical Teeth

Note: Reamers with a cutting diameter of 10" and larger are equipped standard with a stabilizer/packing ring for added strength, centering and a smoother cutting action.

* Additional tapered blades with conical teeth can be added on larger diameter reamers.


Ba

ckrea

mers


Item No.

Nominal Cut

Diameter

Nominal Pack

Diameter Shaft


UT280071006 6.0" 4.5" 2.75" 2" IF (Box x Box) w/ Conical Carbide Blocks



UT280072010 10.0" 8.6" 3.25" 2-3/8" REG (Box x Box) w/ Conical Carbide Blocks









UT280073018 18.0" 16.0" 4.25" 2-7/8" IF (Box x Box) w/ Conical Carbide Blocks














Sand Shark Backreamers*

Sand Shark Reamer with Conical Teeth - API Box x Box Torque Tube


The Sand Shark Series of backreamers are fabricated from heat treated alloy steel to resist wear in abrasive soils while adding strength and durability to the entire reamer. These reamers perform best in unstable soil conditions, such as; sugar sand and sandy loams. Angled blade design offers exceptional mixing and pumping while the tapered body packs a nice, strong filter cake.

Ba

ckre

am

ers


Taper Barrel Backreamers

Our Taper Barrel Reamers feature V-Faced carbide teeth cutters in an offset spiral lacing pattern for optimum cutting in the face of the bore path. The tapered barrel design is perfect for bore wall compaction and stability. These reamers are extremely productive in cobbles, river rock, hardpan and shales.

Tapered Barrel Reamer with Shark Teeth - API REG. Box Forward

Size Range: 6" - 28" Dia. Shaft Diameters: 3" - 4.5



Built-In Swivel

12,000 lb.*

Built-In Swivel

22,000 lb.*

Built-In Swivel

60,000 lb.*

Built-In Swivel

90,000 lb.*

Built-In Swivel

32,000 lb.*

Built-In Swivel

44,000 lb.*




Item No.

Nominal Cut

Diameter

Nominal Pack

Diameter Shaft


UT280001006 6" 4.6" 3" 2-3/8" API REG (B)

UT280001008 8" 5.6" 3" 2-3/8" API REG (B)

UT280001010 10" 6.6" 3" 2-3/8" API REG (B)

UT280002010 10" 6.6" 4" 2-3/8" API REG (B)

UT280001012 12" 8.6" 3" 2-3/8" API REG (B)

UT280002012 12" 8.6" 4" 2-3/8" API REG (B)

UT280001014 14" 10.8" 3" 2-3/8" API REG (B)

UT280002014 14" 10.8" 4" 2-3/8" API REG (B)

UT280001016 16" 12.8" 3" 2-3/8" API REG (B)

UT280002016 16" 12.8" 4" 2-3/8" API REG (B)

UT280001018 18" 14.0" 3" 2-3/8" API REG (B)

UT280002018 18" 14.0" 4" 2-3/8" API REG (B)

UT280001020 20" 16.0" 3" 2-3/8" API REG (B)

UT280002020 20" 16.0" 4" 2-3/8" API REG (B)

UT280001024 24" 20.0" 3" 2-3/8" API REG (B)

UT280002024 24" 20.0" 4" 2-3/8" API REG (B)

UT280001028 28" 24.0" 4" 2-7/8" API REG (B)

Ba

ckrea

mers



Item No. Nominal

Cut Nominal

Pack Shaft


UT280051006 6.0" 4.5" 2.75" 2" IF (Box x Box) w/ Shark Teeth



UT280052010 10.0" 8.6" 3.25" 2-3/8" REG (Box x Box) w/ Shark Teeth









UT280053018 18.0" 16.0" 4.25" 2-7/8" IF (Box x Box) w/ Shark Teeth









Tapered Barrel Reamer with Shark Teeth - API (Box x Box) Torque Tube



Taper Barrel Backreamers

Underground Tools also offers custom built reamers of any size and style. Shown above are two custom Tri-Barrel Reamers built for a unique international HDD project.

Ba

ckre

am

ers


Barrel Backreamers

Barrel Reamers with Conical Teeth - API REG. Box Forward

Size Range: 12.8" - 48.0" Dia. Shaft Diameters: 3" - 6.75"

Item No. Pack

Diameter Shaft


UT280004012 12.8" 3" 2-3/8" API REG (B)

UT280005012 12.8" 4" 2-3/8" API REG (B)

UT280004014 14.0" 3" 2-3/8" API REG (B)

UT280005014 14.0" 4" 2-3/8" API REG (B)

UT280004016 16.0" 3" 2-3/8" API REG (B)

UT280005016 16.0" 4" 2-3/8" API REG (B)

UT280004018 18.0" 3" 2-3/8" API REG (B)

UT280005018 18.0" 4" 2-3/8" API REG (B)

UT280004020 20.0" 3" 2-3/8" API REG (B)

UT280005020 20.0" 4" 2-3/8" API REG (B)

UT280004024 24.0" 3" 2-3/8" API REG (B)

UT280005024 24.0" 4" 2-3/8" API REG (B)

UT280004030 30.0" 4" 2-7/8" API REG (B)

UT280004036 36.0" 4" 3.500" API REG (B)

UT280004042 42.0" 4" 3.500" API REG (B)

UT280004048 48.0" 4" 3.500" API REG (B)



Built-In Swivel

12,000 lb.*

Built-In Swivel

22,000 lb.*

Built-In Swivel

60,000 lb.*

Built-In Swivel

90,000 lb.*

Built-In Swivel

32,000 lb.*

Built-In Swivel

44,000 lb.*




Our Barrel Reamer design features offset rows of fixed conical carbide cutters on the reamer face which allows the reamer to cut slightly larger than its outside diameter, this permits the flow of drilling slurry past the reamer body. Carbide hardfacing is also applied in high wear areas for extended life. These reamers also have replaceable fluid jets and a cleanout plug. Barrel Reamers are often used in tandem with larger reamers, such as, fly cutters or hole openers for stabilization and packing when pulling in final product/utility.

Ba

ckrea

mers


Barrel Backreamers

Barrel Reamers with Conical Teeth - API REG. Box Forward

Size Range: 12.8" - 48.0" Dia. Shaft Diameters: 3" - 6.75"

Item No.

Nominal Cut

Diameter

Nominal Pack

Diameter Shaft


UT280001012 13.5" 12.8" 2.75" 2" IF (Box x Box) w/ Conical Teeth

UT280002012 13.5" 12.8" 3.25" 2-3/8" REG (Box x Box) w/ Conical Teeth








UT280003020 20.5" 20.0" 4.25" 2-7/8" IF (Box x Box) w/ Conical Teeth











Note: * Choose Front and Rear Couplings (adapters/crossovers, drawbars, direct connect swivels) from Reamer Coupling Chart on Page Numbers 66 & 67.

Underground Tools also produces custom built Fly Cutters. We know contractors have a preference for certain tools and Fly Cutters are one such tool. We will custom build to your specifications or we can recommend a design that will perfectly match your application requirements.

Ba

ckre

am

ers


Solid-Body Backreamers

SOLID BODY REAMER -- LPT/Hex (Pin) x Drawbar With Carbide Shark Teeth

Item No.

Nominal Cut

Diameter Pack


UT250006000 6.0" 3.5" 2.125" LPT/Hex Pin with Carbide Shark Teeth

UT250006010 6.0" 3.5" 1.625" LPT/Hex Pin with Carbide Shark Teeth

for Vermeer®

Starter Rods

These high quality one-piece backreamers are machined from solid alloy steel bars and specifically designed for convenience and value. Each backreamer features a built-in Low-Profile Thread (Pin forward with Hex Flats) and a Static Lug Drawbar on the trailing end for quick and easy connections.

Starter Rod Backreamers are available with carbide shark or carbide conical teeth.

SOLID BODY REAMER -- LPT/Hex (Pin) x Drawbar With Carbide Conical Teeth

Item No.

Nominal Cut

Diameter Pack


UT250006015 6.0" 3.5" 2.125" LPT/Hex Pin with Conical Teeth

UT250006020 6.0" 3.5" 1.625" LPT/Hex Pin with Conical Teeth

REPLACEMENT REAMER JETS (STEEL)

Item No. Description

UT250001500 1/8" NPT THD, X 1/8" HOLE

UT250001505 1/8" NPT THD, X 3/16" HOLE

UT250001510 1/4" NPT THD, X 3/16" HOLE

UT250001515 1/4" NPT THD, X 1/4" HOLE

UT250001520 3/8" NPT THD, X 1/4" HOLE

UT250001525 3/8" NPT THD, X 5/16" HOLE

Ba

ckrea

mers


Hole Openers

Hole Opener options for rock drilling applications exceeding 35,000 psi

Mill Tooth and Tungsten Carbide Insert cones available

Bits available with new or premium rerun cutter options

Sealed journal and roller bearing package options

Maximum gage and shirttail protection on cones and arms

Integrated or stand-off centralizers/stabilizers available

Countless Customization Options such as; Any cutter style, any pin & box configuration with any thread specs, stabilizer and rear gusset bars and plates, pre-cutters and rear-facing carbide cutters, carbide wear segments, torque tube jetting and much more.

Underground Tools, Inc. Part Number Reference Guide and Required Information for Hole Openers Example: Part No. UTHO16TCIN59

Designation: UT HO 16" TCI N 5 9"

Description: MFG Hole Opener Tool Size Cone Type Cone Quality # of Cones Cone Size

Hole Openers

Much like drilling a pilot bore path through rock with a Tri-Cone Bit, backreaming with a hole opener can be a challenging endeavor. Similar principles apply in that you want to match the tool to the application. That is why Underground Tools offers hole openers with customized options that suit the anticipated ground conditions which will maximize the rate of penetration and overall production.

UTI offers Hole Openers specifically suited for the Horizontal Directional Drilling Application

Additional Information: ▪ Front and Rear Configurations and Thread Specs ▪ Shaft Diameter ▪ Centralizer / Stabilizer Required ▪ Bearing Package Preference

Ba

ckre

am

ers


Ba

ckrea

mers

Backreamers - Custom Reamer Worksheet

Underground Tools, Inc.

6680 Hodgson Road RFQ# _________________

Lino Lakes, MN 55014

Company Name: Ship To:

Address: Address:

City, State, Zip City, State, Zip

Date: Date Req. Ship Via: FOB:

Drill Manufacturer: ____________________ Drill Model: _____________________

Ground Conditions: __________________________________________________________

Reamer Style:

Solid Fluted Ground Hawg

Spiral Stacked Plate Sand Shark

Sir Mixalot Taper Barrel

Winged Barrel

Other *

* Description: ______________________________________________________________

______________________________________________________________

Cut Diameter: _____________ Torque Tube Diameter: ____________

Drive End Connection: Trailing End Connection:

__________________ Box Thread Spec ___________________ Box Thread Spec

__________________ Pin Thread Spec ___________________ Pin Thread Spec

___________________ Static Lug Pulling Eye

___________________ Integral Swivel

Carbide Cutting Tooth Options:

________ Shark ________ Rotary/Conical ________ Bit & Block ________ Other

Special Instructions: _______________________________________________________________

____________________________________________________________________________________

____________________________________________________________________________________


Nose Piece Adapter Reamer Tail Piece Adapter

Backreamer Coupling Selection Charts*

* Please Contact us for other sizes or styles

BACKREAMER COUPLING SELECTION CHARTS*

THREAD COUPLINGS 2.75" Reamer Shaft 3.25" Reamer Shaft 4.25" Reamer Shaft 4.75" Reamer Shaft

2" IF (Box x Box) 2-3/8" REG (Box x Box) 2-7/8" IF (Box x Box) 3-1/2" IF (Box x Box)

Vermeer®Threads Part No. Part No. Part No. Part No.

1.625" LP (P) x (P) for D6x6 thru D10x15 UT220301625 UT220401625 ¯ ¯

2.125" LP (P) x (P) for D16x20 thru D33x44 UT220302125 UT220402125 ¯ ¯

1.66" FST 1 #200 (B) x (P)for D6x6 thru D10x15 UT220300200 UT220400200 ¯ ¯

1.90" FST 1 #250 (B) x (P) for D16x20 thru D20x22 UT220300250 UT220400250 ¯ ¯

2.06" FST 1 #400 (B) x (P) for D18x22 thru D24x26 UT220300400 UT220400400 ¯ ¯

2.375" FST 1 #600 (B) x (P) for D24x40 thru D24x40 II UT220300600 UT220400600 UT220500600 ¯

2.375" FST 1 #650 (B) x (P) for D33x44 thru D40x40 UT220300650 UT220400650 UT220500650 ¯

2.625" FST 1 #700 (B) x (P) for D36x50 II UT220300700 UT220400700 UT220500700 ¯

2.875" FST 1 #900 (B) x (P) for D50x100, D50x100A ¯ UT220400900 UT220500900 ¯

3.50" FST 1 #800 (B) x (P) for D50x100A thru D80x100 II ¯ UT220400800 UT220500800 UT220600800

3.50" FST 1 #1000 (B) x (P) for D100x120 II ¯ ¯ UT220501000 UT220601000



Ditch Witch®® Threads Part No. Part No. Part No. Part No.

JT 520, EZ 2 (B) x (P) ¯ ¯ ¯ ¯

JT 920/920L, EZ 2 (B) x (P) UT220320200 UT220420200 ¯ ¯

JT 1220 M1, EZ 3 (B) x (P) UT220320300 UT220420300 ¯ ¯

JT 1720, JT 1720 M1, JT 2020 M1, JT 2720, EZ 2 (B) x (P) UT220320400 UT220420400 UT220520400 ¯

JT 2720 M1, EZ 2 (B) x (P) UT220320500 UT220420500 UT220520500 ¯

JT 3020 M1, EZ 3 (B) x (P) UT220320600 UT220420600 UT220520600 ¯

JT 2720 AT, JT 3020 AT, EZ 3 (B) x (P) ¯ ¯ ¯ ¯

JT 4020 M1, EZ 2 (B) x (P) ¯ UT220420700 UT220520700 ¯

JT 520 DRILL PIPE THD (P) x (P) ¯ ¯ ¯ ¯

JT 820, 920/1/2 DRILL PIPE THD (P) x (P) UT220324200 ¯ ¯ ¯

JT 1220 M1, DRILL PIPE THD (P) x (P) UT220324300 ¯ ¯ ¯

JT 1720, JT 1720 M1, DRILL PIPE THD (P) x (P) UT220324400 UT220421400 ¯ ¯

JT 2720, JT 2020 M1, DRILL PIPE THD (P) x (P) UT220324500 UT220421500 ¯ ¯

JT 2720 M1, JT 3020 M1, DRILL PIPE THD (P) x (P) UT220324600 UT220421600 UT220521600 ¯

JT 2720 AT, JT 3020 AT, DRILL PIPE THD (P) x (P) ¯ ¯ ¯ ¯

JT 4020, DRILL PIPE THD (P) x (P) ¯ UT220421700 UT220521700 ¯

JT 4020 M1, DRILL PIPE THD (P) x (P) ¯ UT220421800 UT220521800 ¯

JT 4020 AT, DRILL PIPE THD (P) x (P) ¯ ¯ ¯ ¯

JT 7020, JT 8020 M1, DRILL PIPE THD (P) x (P) ¯ ¯ ¯ ¯

Ba

ckre

am

er C

ou

pli

ng S

elec

tion

Ch

art

s*


Nose Piece Adapter Reamer Tail Piece Adapter

Backreamer Coupling Selection Charts*

STATIC LUG PULLING EYE COUPLINGS 2.75" Reamer Shaft 3.25" Reamer Shaft 4.25" Reamer Shaft 4.75" Reamer Shaft


Torque Tube Threads Part No. Part No. Part No. Part No.

Pulling Eye for Swivel UT1500, UT1800 (5 Ton) UT220360100 - - -

Pulling Eye for Swivel UT2000, UT2250 (8 Ton) UT220360200 - - -

Pulling Eye for Swivel UT2500 (12 Ton) UT220360300 UT220460300 - -

Pulling Eye for Swivel UT3000, UT3500 (25 Ton) UT220360400 UT220460400 - -

Pulling Eye for Swivel UT200060000 (30 Ton) - UT220460500 UT220560500 UT220660500

Pulling Eye for Swivel UT200090000 (45 Ton) - UT220460600 UT220560600 UT220660600

Pulling Eye for Swivle UT200120000 (60 Ton) - UT220460700 UT220560700 UT220660700

DIRECT CONNECT REAMER SWIVELS 2.75" Reamer Shaft 3.25" Reamer Shaft 4.25" Reamer Shaft 4.75" Reamer Shaft


Description Part No. Part No. Part No. Part No.

12,000 Lb. Swivel (Pin x Lug) UT200050110 - - -

22,000 Lb. Swivel (Pin x Lug) UT200050130 UT200050140 - -



60,000 Lb. Swivel (Pin x Lug) - - UT200050185 UT200050190

90,000 Lb. Swivel (Pin x Lug) - - UT200050195 UT200050200

120,000 Lb. Swivel (Pin x Lug) - - - UT200050210

BACKREAMER COUPLING SELECTION CHARTS*



API Threads Part No. Part No. Part No. Part No.

2.375 API REG. Box x Pin UT220340100 ¯ ¯ ¯

2.375 API REG. Pin x Pin UT220340150 ¯ ¯ ¯

2.875 API REG. Box x Pin ¯ UT220442200 ¯ ¯

2.875 API REG. Pin x Pin ¯ UT220442250 ¯ ¯

3.500 API REG. Box x Pin ¯ UT220442300 ¯ ¯

3.500 API REG. Pin x Pin ¯ UT220442350 ¯ ¯

2.375 API IF Box x Pin ¯ UT220442400 UT220542400 UT220642400

2.375 API IF Pin x Pin ¯ UT220442450 UT220542450 UT220642450

2.875 API IF Box x Pin ¯ UT220442500 UT220542500 UT220642500

2.875 API IF Pin x Pin ¯ UT220442550 UT220542550 UT220642550

3.500 API IF Box x Pin ¯ ¯ UT220542600 UT220642600

3.500 API IF Pin x Pin ¯ ¯ UT220542650 UT220642650

* Please Contact us for other sizes or styles

Ba

ckrea

mer C

ou

plin

g S

electio

n C

ha

rts*


Premium Quality HDD Backreamer Teeth

Conical Carbide Teeth

Ref. / Part No. Description

UTAC1600 Carbide Conical Tooth 45 Degree Weld-On

UTBR2 Carbide Conical Tooth 50 Degree Weld-On (N/S)

UTC1260-90 Carbide Conical Tooth 45 Degree Weld-On



* We stock many more sizes and styles of replaceable conical carbide teeth and holders. Please contact us for more information on these tools.

Underground Tools offers the widest selection of replacement Backreamer Teeth in the industry. We use only the finest grades of carbide which are specifically developed to provide optimum performance in HDD applications. Our carbides are designed to withstand high impact while displacing shock loads and delivering superior wear resistance. When brazed to our forged alloy steel bodies you have the toughest, longest lasting carbide teeth on the market.

UTC1340-24

UTC1340-01

UTBR2

UTC1260-90 UTAC1600

Ba

ckre

am

ers


UTSC1032F

UTSC1280 UTSC1250


Scorpion® Carbide Teeth


UTSC1032 Carbide Scorpion® Tooth Weld-On

UTSC1032F Carbide Scorpion® Tooth Weld-On





UTSC1654LS Carbide Scorpion® Tooth Weld-On Long Shank




UTSC2165-875 Carbide Scorpion® Tooth Weld-On


UTSC1032

UTSC2165-875

UTSC1654 UTSC175004

UTSC2164 UTSC2165

UTSC1654LS

Ba

ckrea

mers

UTSC1500


Carbide Insert Segments


UT340001010 3 Piece Carbide Insert Segment Weld-On (N/S) (1.875" Long x .950" High x .875" Thick)

UT340001015 4 Piece Carbide Insert Segment Weld-On (2.50" Long x .950" High x .875" Thick)



Replaceable Conical Carbide Teeth Ref. / Part No. Description

UTB17-C .550" Carbide Bit with Retainer Clip

UTB17BLK .550" Bit Holder/Pocket Weld-On

UT765BLK .765" Bit Holder/Pocket Weld-On

UT765CBBSFP .765" HD Full Cap Carbide Bit-Bump Sleeve Ret. (N/S)

UT765CRFN .765" Full Cap Carbide Bit with Retainer Clip

UT765HDBLK .765" HD Bit Holder/Pocket Weld-On (N/S)



UTB17-C UTB17BLK

UT765CRFN

UT765BLK

UT765CBBSFP UT765HDBLK

Ba

ckre

am

ers


Composite Forged Wear Components

Ref. / Part No. Composite Forged Wear Components

UT100PAD Solid Forged Steel with Tungsten Carbide Wear Areas




UT100PAD UT104PAD

UT100625PAD UT105075PAD

Ba

ckrea

mers


Part Number Description

Working

Load

Outside

Diameter

Clevis

Opening

Clevis Pin

Diameter

UT1500 Pullback Swivel (Clevis x Clevis) 8,500 LB. 1.70" 0.8125" .625"

UT1500R Pullback Swivel (Bolt-On x Clevis) 8,500 LB. 1.70" 0.8125" .625"




UT2500 Pullback Swivel (Clevis x Clevis) 22,000 LB. 2.95" 1.375" 1.000"






Several unique design features of our clevis x clevis swivels combine to make them the strongest on the market. Four bearings and a larger shaft constructed from tool steel provide added strength you won't find with competitors swivels. Full diameter shouldered pins, recessed into the smooth and durable outer casing creates a tremendously strong connection and also allows for snag free pullbacks. These swivels also have side-mounted, recessed grease fittings which protects the fittings and also makes for easy access when performing swivel maintenance.


UT1500P Replacement Pin For - DB-1500










UTGR-1000 Premium Swivel Grease-14 oz cartridge

HDD Pullback Swivels

Replacement Pins for Clevis Style Swivels

Sw

ivel

s


HDD Maxi Rig Swivels

Part No. Size/Rating Description A B C D E F G H J Weight/Lbs.

UT10044 44 Ton/ 88,000 Lb.

Maxi Rig Swivel (Box x Clevis) 24.02 6.50 2.13 6.30 2.44 4.96 1.73 4.72 3 ½" IF 166

UT10058 58 Ton/ 116,000 Lb.


UT10083 83 Ton/ 166,000 Lb.

Maxi Rig Swivel (Box x Clevis) 33.35 8.86 3.27 9.35 3.58 6.69 2.48 6.26 4 ½ IF 353

UT10110 110 Ton/ 220,000 Lb.


UT10154 154 Ton/ 308,000 Lb.


UT10210 210 Ton/ 420,000 Lb.

Maxi Rig Swivel (Box x Clevis) 46.22 14.96 4.02 12.60 4.73 8.66 3.50 7.01 5 ½" FH 1158

UT10265 265 Ton/ 530,000 Lb.

Maxi Rig Swivel (Box x Clevis) 51.30 16.93 4.02 12.64 4.72 9.45 3.50 9.02 6 5/8" FH 1654

UT10320 320 Ton/ 640,000 Lb.


UT10382 382 Ton/ 764,000 Lb.


UT10550 550 Ton/ 1,100,000 Lb.


When it comes to Maxi-Rig HDD Swivels Underground Tools will not compromise on quality. That is why we offer only the best, Brewis Big Rig Pullback Swivels. Each swivel uses either a SKF Explorer or FAG X-Life Spherical Roller Thrust Bearing of a specific declared size. Most swivel manufacturers don't declare the bearing capacity of their swivels, but instead quote a figure for the strength of the supporting steelwork; this isn't much help if the bearing has been compromised or has seized up. Our swivels have a dynamic capacity that exactly matches the rating or size of the swivel.

Features and Benefits: ■ SKF Explorer Spherical Roller Thrust Bearing of a declared size and capacity ■ Patented sealing system that keeps drilling fluids out but still allows for power greasing ■ Easy access side grease point location for easy maintenance and greasing ■ Manufactured from High Tensile 4145 Steel ■ One piece shaft and clevis provides maximum strength and durability ■ Box x Clevis design or Clevis x Clevis design available

Note: All dimensions shown are in inches

Sw

ivels


Tooling Applications-Pilot Bits Pilot Bit Application Chart

Soil Classification Sandy Soft Medium Hard Rocky Soft Rock

Medium

Rock

Hard Rock

Bit Description

CE Series 1 1 3 3 4 5 5 5

CH Series 1 1 2 3 4 5 5 5

RB Series 3 2 1 2 3 4 5 5

CB Series 2 1 2 2 4 5 5 5

TB Series 4 2 1 1 2 4 5 5

ARS Series 5 3 1 1 3 4 5 5

ACC Series 3 3 2 2 1 3 5 5

STH Series 3 2 2 2 1 4 5 5

CF Series 5 3 1 2 4 5 5 5

TT Series 5 3 2 1 3 3 5 5

XT Series 5 4 3 2 1 3 5 5

CR Series 4 3 2 1 4 3 5 5

ACS Series 4 3 2 1 1 2 4 5

SR Series 3 2 1 1 3 3 5 5

XR Series 4 3 2 1 2 2 4 5

Quick Steer 5 4 1 1 2 3 5 5

Duro Spade 5 3 2 1 2 2 4 5

Bog Hog 5 2 1 1 2 4 5 5

Duro Bore 5 5 3 1 1 1 3 5

Tricone Mill Tooth 5 5 5 3 5 1 1 3

Tricone TCI 5 5 5 4 5 2 1 1

1 = Best 2 = Good 3 = Average 4 = Less Recommended 5 = Not Recommended

Soil Classification

Sandy Soil Sugar Sands, Sandy Loams or any soil with sand as the dominant soil characteristic

Soft Soil Loam, Silt, Clay, soft to medium soils that posses limited moisture content

Medium Soil Semi-compacted soils; Clays, Loams

Hard Soil Compacted soils; Hardpan, Dry Clays, Gumbo

Rocky Soil Cobble, Rip Rap, Chunk Rock, Gravel, Glacial Till, any fragmented type of rock

Soft Rock Soft Limestone, Caliche, Sandstone, Shale, Coral (up to approximately 8500 psi)

Medium Rock Medium Limestone, Certain Dolomite, Shale, Coral (between Approx. 8500 psi - 15,000 psi)

Hard Rock Granite, Hard Limestone, Schist, Marble, Trap Rock, Quartzite (any soil condition above 15,000 psi)

Note: All charts presented in this catalog are to be used as reference guides only. Soil conditions may vary during the boring process and several other factors unrelated to soil conditions will also directly affect pilot bit and backreamer performance. Contact the DirtSmart® Technical Support Staff at Underground Tools, Inc. or your local UTI dealer for more detailed information regarding soil conditions and pilot bit and/or backreamer recommendations.

Underground Tools, Inc. offers a complete line of pilot bits for virtually any ground condition you will ever encounter while drilling. From our Conqueror Line of dirt bits, manufactured from Ballistic Armor Alloy Steel Plate, to Geo heads and Tricones, we have what you need. Reference the application chart below or contact UTI or your local UTI dealer for the bit that will optimize your production and provide the best overall wear life.

Pil

ot

Bit

s


Pilot Bits

Underground Tools Conqueror Line of pilot bits are constructed of Armor and Ballistic Steel Plate that boasts a hardness rating of RC55 and Tensile Strength rating of nearly 300,000 psi. They are also put through a proprietary Heat Treatment process which provides additional wear life. Carbide segments brazed and welded to these durable bodies along with carbide hardfacing creates the strongest, longest lasting drill bits on the market. With over 15 styles available there is a Conqueror bit perfectly suited for every ground condition you encounter, from soft dirt to hard rock and everything in between.

RB SERIES PILOT BITS (Pull Back Hole Std.)

Part No. Description Hole Pattern Width Thk.

UT06P535RB Pilot Bit - 3.5" RB Series 5-Hole Ditch Witch® -- 12 MM 3.5" 3/4"

UT06P540RB Pilot Bit - 4" RB Series 5-Hole Ditch Witch® -- 12 MM 4.0" 3/4"







UT06P735RB Pilot Bit - 3.5" RB Series 7-Hole Vermeer® -- 1/2" x 13 3.5" 3/4"

UT06P740RB Pilot Bit - 4" RB Series 7-Hole Vermeer® -- 1/2" x 13 4.0" 3/4"

UT06P745RB Pilot Bit - 4.5" RB Series 7-Hole Vermeer® -- 1/2" x 13 4.5" 3/4"

UT06P750RB Pilot Bit - 5" RB Series 7-Hole Vermeer® -- 1/2" x 13 5.0" 3/4"

UT08P650RB Pilot Bit - 5" RB Series 6-Hole Ditch Witch® -- 16 MM 5.0" 1.0"

UT08P750RB Pilot Bit - 5" RB Series 7-Hole Vermeer® -- 1/2" x 13 5.0" 1.0"

Radial design with press fit and brazed conical carbides make this bit excellent for loams, clays, all medium soil conditions up to and including rocky and soft rock formations.

ACS SERIES PILOT BITS (Pull Back Hole Std.)


UT06P540ACS Pilot Bit - 4" ACS Series 5-Hole Ditch Witch® -- 12 MM 4.0" 3/4"


UT06P735ACS Pilot Bit - 3.5" ACS Series 7-Hole Vermeer® -- 1/2" x 13 3.5" 3/4"

UT06P740ACS Pilot Bit - 4" ACS Series 7-Hole Vermeer® -- 1/2" x 13 4.0" 3/4"


UT06P750ACS Pilot Bit - 5" ACS Series 7-Hole Vermeer® -- 1/2" x 13 5.0" 3/4"




UT08P850ACS Pilot Bit - 5" ACS Series 7-Hole Vermeer® -- 5/8" x 11 5.0" 1"

UT08P860ACS Pilot Bit - 6" ACS Series 7-Hole Vermeer® -- 5/8" x 11 6.0" 1"

UT08P650ACS Pilot Bit - 5" ACS Series 6-Hole Ditch Witch® -- 16 MM 5.0" 1"

UT08P660ACS Pilot Bit - 6" ACS Series 6-Hole Ditch Witch® -- 16 MM 6.0" 1"

Semi steep tapered design with with cone profiled carbides on the cutting face and dome profiled carbides on the tapered cutting surfaces. An extremely long lasting all purpose bit that performs great in anything from light, soft soils to hardpan, caliche, cobble and even harder rock formations.

Pilo

t Bits


Pilot Bits

ACC SERIES PILOT BITS (Pull Back Hole Std.)


UT06P535ACC Pilot Bit - 3.5" ACC Series 5-Hole Ditch Witch® -- 12 MM 3.5" 3/4"

UT06P540ACC Pilot Bit - 4" ACC Series 5-Hole Ditch Witch® -- 12 MM 4.0" 3/4"




UT06P735ACC Pilot Bit - 3.5" ACC Series 7-Hole Vermeer® -- 1/2" x 13 3.5" 3/4"

UT06P740ACC Pilot Bit - 4" ACC Series 7-Hole Vermeer® -- 1/2" x 13 4.0" 3/4"

UT06P745ACC Pilot Bit - 4.5" ACC Series 7-Hole Vermeer® -- 1/2" x 13 4.5" 3/4"



UT08P640ACC Pilot Bit - 4" ACC Series 6-Hole Ditch Witch® -- 16 MM 4.0" 1.0"

UT08P650ACC Pilot Bit - 5" ACC Series 6-Hole Ditch Witch® -- 16 MM 5.0" 1.0"

UT08P6A50ACC Pilot Bit - 5" ACC Series 6-Hole Ditch Witch® -- 20 MM 5.0" 1.0"

UT08P6A60ACC Pilot Bit - 6" ACC Series 6-Hole Ditch Witch® -- 20 MM 6.0" 1.0"

UT08P740ACC Pilot Bit - 4" ACC Series 7-Hole Vermeer® -- 1/2" x 13 4.0" 1.0"

UT08P745ACC Pilot Bit - 4.5" ACC Series 7-Hole Vermeer® -- 1/2" x 13 4.5" 1.0"





Slightly tapered "Bear Claw" design with conical carbides across both faces of the leading edges and tungsten carbide mesh hardfacing on the high wear areas and down the sides. Long lasting bits which are very productive in rocky and abrasive soils.

TB SERIES PILOT BITS (Pull Back Hole Std.)


UT06P535TB Pilot Bit - 3.5" TB Series 5-Hole Ditch Witch® -- 12 MM 3.5" 3/4"

UT06P540TB Pilot Bit - 4" TB Series 5-Hole Ditch Witch® -- 12 MM 4.0" 3/4"







UT06P735TB Pilot Bit - 3.5" TB Series 7-Hole Vermeer® -- 1/2" x 13 3.5" 3/4"

UT06P740TB Pilot Bit - 4" TB Series 7-Hole Vermeer® -- 1/2" x 13 4.0" 3/4"

UT06P745TB Pilot Bit - 4.5" TB Series 7-Hole Vermeer®® -- 1/2" x 13 4.5" 3/4"

UT06P750TB Pilot Bit - 5" TB Series 7-Hole Vermeer® -- 1/2" x 13 5.0" 3/4"

Tapered design with press fit and brazed dome and cone profile carbides make this a great all around bit that works well in a wide variety of ground conditions; including hard and rocky soils.

Pil

ot

Bit

s


Pilot Bits

CB SERIES PILOT BITS (Pull Back Hole Std.)


UT06P535CB Pilot Bit - 3.5" CB Series 5-Hole Ditch Witch® -- 12 MM 3.5" 3/4"

UT06P540CB Pilot Bit - 4" CB Series 5-Hole Ditch Witch® -- 12 MM 4.0" 3/4"






UT06P735CB Pilot Bit - 3.5" CB Series 7-Hole Vermeer® -- 1/2" x 13 3.5" 3/4"

UT06P740CB Pilot Bit - 4" CB Series 7-Hole Vermeer® -- 1/2" x 13 4.0" 3/4"

UT06P745CB Pilot Bit - 4.5" CB Series 7-Hole Vermeer® -- 1/2" x 13 4.5" 3/4"

UT06P750CB Pilot Bit - 5" CB Series 7-Hole Vermeer® -- 1/2" x 13 5.0" 3/4"

Square tip design with similar carbide as the TB Series these bits are like super-duty duckbill bits. They perform great in soft to hard soil conditions and still allow for optimal steering capability.

STH SERIES PILOT BITS (Pull Back Hole Std.)


UT06P535STH Pilot Bit - 3.5" STH Series 5-Hole Ditch Witch® -- 12 MM 3.5" 3/4"

UT06P540STH Pilot Bit - 4" STH Series 5-Hole Ditch Witch® -- 12 MM 4.0" 3/4"







UT06P6A50STH Pilot Bit - 5" STH Series 6-Hole Ditch Witch® -- 20 MM 5.0" 1.0"

UT06P6A60STH Pilot Bit - 6" STH Series 6-Hole Ditch Witch® -- 20 MM 6.0" 1.0"

UT06P735STH Pilot Bit - 3.5" STH Series 7-Hole Vermeer® -- 1/2" x 13 3.5" 3/4"

UT06P740STH Pilot Bit - 4" STH Series 7-Hole Vermeer® -- 1/2" x 13 4.0" 3/4"

UT06P745STH Pilot Bit - 4.5" STH Series 7-Hole Vermeer® -- 1/2" x 13 4.5" 3/4"



Steep taper design with premium tungsten mesh carbide hardfacing allows this bit to drill its way through rocky soils such as cobble, rip rap and other fragmented ground conditions.

Pilo

t Bits


Pilot Bits

CH SERIES PILOT BITS (Pull Back Hole Std.)


UT06P535CH Pilot Bit - 3.5" CH Series 5-Hole Ditch Witch® -- 12 MM 3.5" 3/4"

UT06P540CH Pilot Bit - 4" CH Series 5-Hole Ditch Witch® -- 12 MM 4.0" 3/4"






UT06P6A50CH Pilot Bit - 5" CH Series 6-Hole Ditch Witch® -- 20 MM 5.0" 1.0"

UT06P6A60CH Pilot Bit - 6" CH Series 6-Hole Ditch Witch® -- 20 MM 6.0" 1.0"

UT06P735CH Pilot Bit - 3.5" CH Series 7-Hole Vermeer® -- 1/2" x 13 3.5" 3/4"

UT06P740CH Pilot Bit - 4" CH Series 7-Hole Vermeer® -- 1/2" x 13 4.0" 3/4"

UT06P745CH Pilot Bit - 4.5" CH Series 7-Hole Vermeer® -- 1/2" x 13 4.5" 3/4"

UT06P750CH Pilot Bit - 5" CH Series 7-Hole Vermeer® -- 1/2" x 13 5.0" 3/4"

UT08P740CH Pilot Bit - 4" CH Series 7-Hole Vermeer® -- 1/2" x 13 4.0" 1.0"

UT08P745CH Pilot Bit - 4.5" CH Series 7-Hole Vermeer® -- 1/2" x 13 4.5" 1.0"



Square nose design with premium tungsten mesh carbide hardfacing makes this bit perfect for sandy or softer soils, as well as, medium conditions. A high performing, long lasting and economical bit that steers extremely well.

CE SERIES PILOT BITS (Pull Back Hole Std.)


UT06P535CE Pilot Bit - 3.5" CE Series 5-Hole Ditch Witch® -- 12 MM 3.5" 3/4"

UT06P540CE Pilot Bit - 4" CE Series 5-Hole Ditch Witch® -- 12 MM 4.0" 3/4"






UT06P6A50CE Pilot Bit - 5" CE Series 6-Hole Ditch Witch® -- 20 MM 5.0" 1.0"

UT06P6A60CE Pilot Bit - 6" CE Series 6-Hole Ditch Witch® -- 20 MM 6.0" 1.0"

UT06P735CE Pilot Bit - 3.5" CE Series 7-Hole Vermeer®-- 1/2" x 13 3.5" 3/4"

UT06P740CE Pilot Bit - 4" CE Series 7-Hole Vermeer® -- 1/2" x 13 4.0" 3/4"

UT06P745CE Pilot Bit - 4.5" CE Series 7-Hole Vermeer®-- 1/2" x 13 4.5" 3/4"

UT06P750CE Pilot Bit - 5" CE Series 7-Hole Vermeer® -- 1/2" x 13 5.0" 3/4"

UT08P740CE Pilot Bit - 4" CE Series 7-Hole Vermeer® -- 1/2" x 13 4.0" 1.0"

UT08P745CE Pilot Bit - 4.5" CE Series 7-Hole Vermeer® -- 1/2" x 13 4.5" 1.0"

UT08P750CE Pilot Bit - 5" CE Series 7-Hole Vermeer® -- 1/2" x 13 5.0" 1.0"

Square nose design that has been heat treated for maximum life in light, soft ground conditions. The most economical pilot bit option available.

Pil

ot

Bit

s


Pilot Bits

CR SERIES PILOT BITS (Pull Back Hole Std.)


UTVCH4 Pilot Bit - 4" CR Series 7-Hole Vermeer® -- 1/2" x 13 4.0" 3/4"

UTVCH4.5 Pilot Bit - 4.5" CR Series 7-Hole Vermeer® -- 1/2" x 13 4.5" 3/4"

UTVCH5 Pilot Bit - 5" CR Series 7-Hole Vermeer® -- 1/2" x 13 5.0" 3/4"

UTVCH5.5 Pilot Bit - 5.5" CR Series 7-Hole Vermeer® -- 1/2" x 13 5.5" 3/4"

UTD5CH4 Pilot Bit - 4" CR Series 5-Hole Ditch Witch® -- 12 MM 4.0" 3/4"

UTD5CH4.5 Pilot Bit - 4.5" CR Series 5-Hole Ditch Witch® -- 12 MM 4.5" 3/4"







Chevron shaped carbides brazed to matching body along with reaming edge carbides provide for better productivity in tougher soils, such as caliche, hardpan and shales.

XT SERIES PILOT BITS (Pull Back Hole Std.)


UTVXT3.5 Pilot Bit - 3.5" XT Series 7-Hole Vermeer® -- 1/2" x 13 3.5" 3/4"

UTVXT4 Pilot Bit - 4" XT Series 7-Hole Vermeer® -- 1/2" x 13 4.0" 3/4"

UTVXT4.5 Pilot Bit - 4.5" XT Series 7-Hole Vermeer®

-- 1/2" x 13 4.5" 3/4"

UTVXT5 Pilot Bit - 5" XT Series 7-Hole Vermeer® -- 1/2" x 13 5.0" 3/4"

UTDXT535 Pilot Bit - 3.5" XT Series 5-Hole Ditch Witch® -- 12 MM 3.5" 3/4"

UTDXT540 Pilot Bit - 4" XT Series 5-Hole Ditch Witch® -- 12 MM 4.0" 3/4"







Similar in design to the XR Series bit, but the XT uses conical or dome shaped carbides instead of V-shaped carbides. The conical carbides can handled more impact when conditions require it.

Pilo

t Bits


Pilot Bits

TT SERIES PILOT BITS (Pull Back Hole Std.)


UTVTT3.5 Pilot Bit - 3.5" TT Series 7-Hole Vermeer® -- 1/2" x 13 3.5" 3/4"

UTVTT4 Pilot Bit - 4" TT Series 7-Hole Vermeer® -- 1/2" x 13 4.0" 3/4"

UTVTT4.5 Pilot Bit - 4.5" TT Series 7-Hole Vermeer® -- 1/2" x 13 4.5" 3/4"

UTVTT5 Pilot Bit - 5" TT Series 7-Hole Vermeer® -- 1/2" x 13 5.0" 3/4"

UTDTT535 Pilot Bit - 3.5" TT Series 5-Hole Ditch Witch® -- 12 MM 3.5" 3/4"

UTDTT540 Pilot Bit - 4" TT Series 5-Hole Ditch Witch® -- 12 MM 4.0" 3/4"



UTDTT640 Pilot Bit - 4" TT Series 6-Hole Ditch Witch®-- 16 MM 4.0" 3/4"




Radial design with V-shaped tungsten carbide segments that track on opposite sides of each other for maximum penetration and faster removal of cuttings in soft and medium formations.

CF SERIES PILOT BITS


UTVCF3.5 Pilot Bit - 3.5" CF Series 7-Hole Vermeer®

-- 1/2" x 13 3.5" 3/4"

UTVCF4 Pilot Bit - 4" CF Series 7-Hole Vermeer® -- 1/2" x 13 4.0" 3/4"

UTVCF4.5 Pilot Bit - 4.5" CF Series 7-Hole Vermeer® -- 1/2" x 13 4.5" 3/4"

UTVCF5 Pilot Bit - 5" CF Series 7-Hole Vermeer® -- 1/2" x 13 5.0" 3/4"

UTDCF535 Pilot Bit - 3.5" CF Series 5-Hole Ditch Witch® -- 12 MM 3.5" 3/4"

UTDCF540 Pilot Bit - 4" CF Series 5-Hole Ditch Witch® -- 12 MM 4.0" 3/4"







Claw finger design with tungsten carbide hardfacing drills great in soft through hard soils. Extremely productive in clays with fingers penetrating and peeling clay away without it balling up on the cutter head.

Pil

ot

Bit

s


Pilot Bits

ARS SERIES PILOT BITS


UT06P535ARS Pilot Bit - 3.5" ARS Series 5-Hole Ditch Witch® -- 12 MM 3.5" 3/4"

UT06P540ARS Pilot Bit - 4" ARS Series 5-Hole Ditch Witch® -- 12 MM 4.0" 3/4"

UT06P545ARS Pilot Bit - 4.5" ARS Series 5-Hole Ditch Witch® -- 12 MM 4.5" 3/4"

UT06P735ARS Pilot Bit - 3.5" ARS Series 7-Hole Vermeer® -- 1/2" x 13 3.5" 3/4"

UT06P740ARS Pilot Bit - 4" ARS Series 7-Hole Vermeer® -- 1/2" x 13 4.0" 3/4"

UT06P745ARS Pilot Bit - 4.5" ARS Series 7-Hole Vermeer® -- 1/2" x 13 4.5" 3/4"

UT06P750ARS Pilot Bit - 5" ARS Series 7-Hole Vermeer® -- 1/2" x 13 5.0" 3/4"

Similar in design and functionality to the CF Series bits, but built to handle more demanding conditions due to the lower profile and small Scorpion teeth welded to the body. These bits rip their way through compacted soils such as hardpan and clays.

SR SERIES PILOT BITS


UT06P540SR Pilot Bit - 4" SR Series 5-Hole Ditch Witch® -- 12 MM 4.0" 3/4"




UT08P6A50SR Pilot Bit - 5" SR Series 6-Hole Ditch Witch® -- 20 MM 5.0" 1.0"

UT08P6A60SR Pilot Bit - 6" SR Series 6-Hole Ditch Witch® -- 20 MM 6.0" 1.0"

UT06P735SR Pilot Bit - 3.5" SR Series 7-Hole Vermeer® -- 1/2" x 13 3.5" 3/4"

UT06P740SR Pilot Bit - 4" SR Series 7-Hole Vermeer® -- 1/2" x 13 4.0" 3/4"

UT06P750SR Pilot Bit - 5" SR Series 7-Hole Vermeer® -- 1/2" x 13 5.0" 3/4"

UT08P740SR Pilot Bit - 4" SR Series 7-Hole Vermeer®

-- 1/2" x 13 4.0" 1.0"

UT08P750SR Pilot Bit - 5" SR Series 7-Hole Vermeer® -- 1/2" x 13 5.0" 1.0"



UT08P845SR Pilot Bit - 4.5" SR Series 7-Hole Vermeer® -- 5/8" x 11 4.5" 1.0"



Tapered design with V-shaped tungsten carbide segments on leading edges. A great all around bit that can handle the demanding applications such as rock and will outlast most other bits in the widest of ground conditions.

Pilo

t Bits


Pilot Bits

REPLACEMENT WELD-ON CARBIDE SEGMENTS

Part No. Description

UT340001010 3 Piece Carbide Insert Segment





XR SERIES PILOT BITS


UT06P535XR Pilot Bit - 3.5" XR Series 5-Hole Ditch Witch® -- 12 MM 3.5" 3/4"

UT06P540XR Pilot Bit - 4" XR Series 5-Hole Ditch Witch® -- 12 MM 4.0" 3/4"

UT06P545XR Pilot Bit - 4.5" XR Series 5-Hole Ditch Witch® -- 12 MM 4.5" 3/4"



UT06P740XR Pilot Bit - 4" XR Series 7-Hole Vermeer® -- 1/2" x 13 4.0" 3/4"

UT06P745XR Pilot Bit - 4.5" XR Series 7-Hole Vermeer® -- 1/2" x 13 4.5" 3/4"



UT08P840XR Pilot Bit - 4" XR Series 7-Hole Vermeer® -- 5/8" x 11 4.0" 1.0"

UT08P845XR Pilot Bit - 4.5" XR Series 7-Hole Vermeer® -- 5/8" x 11 4.5" 1.0"



UT08P6A50XR Pilot Bit - 5" XR Series 6-Hole Ditch Witch® -- 20 MM 5.0" 1.0"

UT08P6A60XR Pilot Bit - 6" XR Series 6-Hole Ditch Witch® -- 20 MM 6.0" 1.0"

Steep Taper design with V-shaped tungsten carbide segments that performs great in hard soils, soft rock and certain medium rock formations. The steep taper front and carbides allow it to penetrate in tough ground condtions and drill at a high rate of production.

PILOT BIT BOLTS (BLADE STYLE)


UT260026005 1/2" x 1" x 13 thd. - Vermeer

UT12131SHCSP 1/2" x 1" x 13 thd. - Vermeer (Nylon Locking Patch)

UT58111SHCSP 5/8" x 1" x 11 thd. - Vermeer (Nylon Locking Patch)

UT260026015 12MM x 20 X 1.75 - Ditch Witch

UT260026016 12MM x 20 X 1.75 - Ditch Witch (Nylon Locking Patch)

UT260026020 16MM x 35MM x 2.00MM - Ditch Witch

UT260026022 20MM x 40MM x 2.50MM - Ditch Witch

HEX L-KEYS FOR PILOT BITS (BLADE STYLE)


UT260026001 3/8" Long Arm Hex Key fits 1/2" Bolts

UT260026106 1/2" Long Arm Hex Key fits 5/8" Bolts

UT260026011 10MM Long Arm Hex Key fits 12MM Bolts

UT260026116 14MM Long Arm Hex Key fits 16MM Bolts

Pil

ot

Bit

s


Tri-Cone Bit options for rock drilling applications exceeding 35,000 psi

Bits available with new or premium rerun cone options

Sealed journal and roller bearing package options

Carbide inserts or hardfacing for maximum shirttail protection

Carbide inserts for maximum gage protection

Mill Tooth and Tungsten Carbide Insert cones available

TCI available in a wide variety of tooth profiles

Pilot Bits

Standard reference table for Tri-Cone

bit size and corresponding thread spec

Tri-Cone Size Thread Spec (Std.) from 3 1/2" to 4 1/2" 2 3/8" API Reg

from 4 5/8" to 5 1/2" 2 7/8" API Reg

from 5 5/8" to 7 3/8" 3 1/2" API Reg

from 7 5/8" + 4 1/2" API Reg

Bit Size/Dia. Thread Spec Application / Formation Type

3 7/8" 2 3/8" API Reg Soft/Medium/Hard







Illustration of common Tri-Cone Bit product offering from UTI

For more information or pricing on Tri-Cone Bits please contact a UTI representative

TRI-CONE ROCK BITS

"All Rock Is NOT Created Equal"

Similar to soils, solid rock comes in many forms, from softer Shales to much harder Granite or Schist. At Underground Tools we understand that drilling is all about production and one style of Tri-Cone Bit will not deliver the performance you require in varying rock formations. This is why Underground Tools, Inc. offers a wide variety of Tri-Cone Rock Bit options.

UTI offers Tri-Cone Rock Bits specifically suited for the Horizontal Directional Drilling Application

Pilo

t Bits


Drilling Fluids

Drilling Fluids, Grouts, Sealants, Polymers &

Additives

Underground Tools offers the widest assortment of high quality bentonite drilling fluids, grouts, sealants, polymers, and additives on the market. Our drilling products are manufactured by CETCO, the most trusted and well respected drilling product manufacturer in the world. Our complete line of professional products are specially designed to help maximize your drilling efficiency by controlling and improving drilling fluid properties.

Most commonly used HDD Drilling Products are shown below with associated conditions

Drilling Conditions Products Dosage per 100 Gals. Viscosity(1)

Sands Hydraul-EZ 25 - 30 Lbs. 45 - 50

Sand and Gravel Hydraul-EZ / Super Pac 30 - 35 Lbs. / 1 - 2 Qts. 50 - 55

Clays Hydraul-EZ / Insta-Vis Plus /

Clay Cutter 10 - 15 Lbs. /

0.5 - 1 Qt. / 0.5 Pt. 35 - 40

Unknown Hydraul-EZ / Rel-Pac

Xtra-Low 25 -35 Lbs. / 1 Lb. 45 - 55

Difficult Conditions

Gravel and Cobble Hydraul-EZ / Super Pac Xtra-Low / Suspend-It

25 - 35 Lbs. / 0.5 - 1 Qt. / 1 - 2 Lbs.

70 - 90

Swelling Clays Add Clay Cutter to Existing

Slurry 1 Pt. 35 - 40

Sticky Clays Add Drill-Terge and Insta-Vis

Plus to Existing Slurry 2 - 3 Qts. / 0.5 - 1 Qt. 35 - 40

Make-Up Water

Low pH and/or Hard Water Adjust pH to 8-10

w/Soda Ash 0.25 - 0.5 Lb. ―

(1) Marsh funnel viscosity measured in seconds per quart

Each and every drilling product is supported by Underground Tools experienced "DirtSmart" sales and customer support staff and CETCO's expert support teams of field engineers and research scientists. Together, we are committed to ensuring your success on any drilling project.

Dri

llin

g F

luid

s


Drill Pipe Compounds & Accessories

Tool Joint Compound/Thread Lube

We offer several different grades of Thread Lubes including; Kopr-Kote®, JL-21, JLS, Eco-Safe, Jet-Lube

Extreme and more. We also have Arctic grade versions in most of these offerings.

Underground Tools offers only the best when it comes to HDD products, and Drill Pipe Compounds and accessories are no exception. We provide Jet-Lube

® products, the benchmark of quality for thread lubes,

thread sealants, anti-siezes, epoxies and other specialty products.

Kopr-Kote® JL-21 Eco-Safe JLS

Part No. Description Part No. Description Part No. Description Part No. Description

UT10050 14 oz. Cartridge UT10923 1 gal. Pail UT14523 1 gal. Pail UT11923 1 gal. Pail

UT10023 1 gal. Pail UT10912 2 gal. Pail UT14512 2 gal. Pail UT11912 2 gal. Pail

UT10012 2 gal. Pail UT10915 5 gal. Pail UT14515 5 gal. Pail UT11915 5 gal. Pail

UT10015 5 gal. Pail * Don't forget to ask about dope brushes or Easy-Clean Detergent and Towels

Thread Locks (Epoxy Based)

Two-part epoxy with metallic fillers that are used to permanently lock threaded connections under normal operating conditions. Specifically for use on all threaded joints where an exceptionally strong and durable bond is required.

Jet-Lok II Jet-Lok II Handy Pak

Part No. Description Part No. Description

UT60867 8 oz. Can UT60845 24-Ct. Display Box

UT60868 16 oz. Can UT60843 144-Ct. Carton

It Doesn't End Here - we have many other complementary products that go hand-in hand with these drill pipe and thread locking compounds. Product groups include; Greases, Lubricants and Penetrants, Wire Rope and Chain Lubes, Cleanup Compounds and other Specialty Products Contact your local UTI Dealer or UTI directly for more information.

Drill P

ipe C

om

pou

nd

s & A

ccessories


HDD Pulling Accessories

Underground Tools offers pulling accessories of all styles and sizes, including; wire mesh pull grips, swivel links, duct and pipe pullers, expandable duct pullers, wire rope pulling slings, shackles, starter rod drawbars and more. If we don't already have it, we'll find it or build it for you.

Wire Rope, Multi-Duct Pulling Slings

Economic and efficient method to connect and pull multiple (2 - 6) ducts at a time

Staggered leg arrangement ensures that individual connections do not interfere with each other

Manufactured from extra flexible, 7x19, galvanized aircraft cable for strength and durability

Replaceable legs

H.D. WIRE ROPE PULLING SLINGS with Load Rated Forged Shackle*

PART NO. DESCRIPTION

UTWRS-202 1/4" DIA. CABLE, 2 LEGS, TOTAL WORK LD. 4,000 LBS.















UTDS-500 SLING SHACKLE - 1/2" 4,000 LB. W/L




UTDS-100 SLING SHACKLE - 1.0" 17,000 LB. W/L

* Not for overhead lifting ** Based Shackle rating HD

D P

ull

ing A

cces

sori

es



Standard Duty Wire Rope Pulling Harnesses with Steel D-Ring Pulling Eye*

PART

NO.

CABLE

DIA.

NO. of

LEGS

WORKING

LOAD/LEG

TOTAL WORK

LOAD**

D-RING

SIZE

D-RING

WIDTH

WRH-2002 1/4" 2 2300 lb. 2,200 lb. 3/8" 2-1/4"

WRH-2003 1/4" 3 2300 lb. 2,200 lb. 3/8" 2-1/4"

WRH-2004 1/4" 4 2300 lb. 2,200 lb. 3/8" 2-1/4"

WRH-2012 1/4" 2 2300 lb. 4,000 lb. 1/2" 3.0"

WRH-2013 1/4" 3 2300 lb. 4,000 lb. 1/2" 3.0"

WRH-2014 1/4" 4 2300 lb. 4,000 lb. 1/2" 3.0"

WRH-2015 1/4" 5 2300 lb. 4,000 lb. 1/2" 3.0"

WRH-2016 1/4" 6 2300 lb. 4,000 lb. 1/2" 3.0"

WRH-3002 3/8" 2 4,800 lb. 6,100 lb. 5/8" 3-1/4"

WRH-3003 3/8" 3 4,800 lb. 6,100 lb. 5/8" 3-1/4"

WRH-3004 3/8" 4 4,800 lb. 6,100 lb. 5/8" 3-1/4"

WRH-3005 3/8" 5 4,800 lb. 6,100 lb. 5/8" 3-1/4"

WRH-3006 3/8" 6 4,800 lb. 6,100 lb. 5/8" 3-1/4"

WRH-3012 3/8" 2 4,800 lb. 9,100 lb. 3/4" 3-1/2"

WRH-3013 3/8" 3 4,800 lb. 9,100 lb. 3/4" 3-1/2"

WRH-3014 3/8" 4 4,800 lb. 9,100 lb. 3/4" 3-1/2"

WRH-3015 3/8" 5 4,800 lb. 9,100 lb. 3/4" 3-1/2"

WRH-3016 3/8" 6 4,800 lb. 9,100 lb. 3/4" 3-1/2"

WRH-4002 1/2" 2 7,000 lb. 9,100 lb. 3/4" 3-1/2"

WRH-4003 1/2" 3 7,000 lb. 9,100 lb. 3/4" 3-1/2"

WRH-4004 1/2" 4 7,000 lb. 9,100 lb. 3/4" 3-1/2"

WRH-4012 1/2" 2 7,000 lb. 12,200 lb. 7/8' 4.0"

WRH-4013 1/2" 3 7,000 lb. 12,200 lb. 7/8" 4.0"

WRH-4014 1/2" 4 7,000 lb. 12,200 lb. 7/8" 4.0"

WRH-4022 1/2" 2 7,000 lb. 16,200 lb. 1.0" 4-1/2"

WRH-4023 1/2" 3 7,000 lb. 16,200 lb. 1.0" 4-1/2"

WRH-4024 1/2" 4 7,000 lb. 16,200 lb. 1.0" 4-1/2"

* Not for overhead lifting ** Based on D-Ring rating.

HD

D P

ullin

g A

ccessories



REPLACEMENT LEGS FOR SLINGS


UTRL-214 1/4" X 14" REPLACEMENT LEG


UTRL-234 1/4" X 14" & 34" REPLACEMENT LEGS
















Wire Rope, Multi-Duct Pulling Slings / Replacement Legs

HD

D P

ull

ing A

cces

sori

es


Vermeer Starter Rod Drawbars

Remove your housing and direct-connect to your starter rod with the starter rod drawbar and start pulling or connect a swivel and pull your product in

Swivel Links

Quickly and easily attach a swivel to most UTI pilot bits and form a strong and rigid connection with the Swivel-Link


Expandable Pulling Eyes

Manufactured from hardened alloy steel for superior strength

Segmented jaws and cone shaped steel expander equally distribute gripping force and pulling load to the inside wall of duct for maximum grip strength

Solid one-piece steel cone and sleeve design delivers a watertight seal and prevents the ducting from over expansion or rupture

PE & PVC EXPANDING JAW PULLING EYES HARDENED ALLOY STEEL JAWS, CONE & ROD


UT60002000 2" Non-Sleeved Pulling Eye, SDR 11 thru 21, SIDR 7 thru 15, SCH 40 & 80

UT60002100 2" Sleeved Pulling Eye, SDR 11 thru 21, SCH 40 & 80

UT60004000 4" Non-Sleeved Pulling Eye, SDR 11 thru 21, SIDR 7 thru 15 & SCH 40 & 80

UT60004100 4" Sleeved Pulling Eye, SDR 11 thru 21, SCH 40 & 80

SWIVEL-LINK PART NO. DESCRIPTION UTSL-9000 Complete Assembly

UTSL-9000A Heat Treated Body

UTSL-9000B Heat Treated Locking Pin

UTSL-9000C Heat Treated Steel Bushing

UTSL-9000D Heat Treated Deflector

UTSL-9000E Heat Treated Bolt

VERMEER STARTER ROD DRAWBARS (CHROME-MOLY STEEL -- 153,000 psi tensile strength)


UT260010500 2.125" LPT/HEX PIN X DRAWBAR W/fluid holes

UT260010505 1.625" LPT/HEX PIN x DRAWBAR W/fluid holes

HD

D P

ullin

g A

ccessories



Duct & Pipe Pullers

Machined with a tapered buttress thread and when installed properly are stronger than the tensile strength of the pipe or innerduct they are pulling

Quick, easy and economical approach to pulling in small diameter pipe or duct

DUCT AND PIPE PULLERS - LUG STYLE PART NO. DESCRIPTION

UTDP-075L GRIP RANGE 0.72" - 0.93" WITH REAR LUG


UTDP-100AL GRIP RANGE 1" Irrigation Pipe - SDR21 With REAR LUG






DUCT AND PIPE PULLERS - CLEVIS STYLE PART NO. DESCRIPTION

UTDPC-100L GRIP RANGE 0.94" - 1.15" WITH REAR LUG




SHACKLES & PINS PART NO. DESCRIPTION UTAS-312 BODY SIZE - 5/16" WLL 1,500 LBS.

UTAS-375 BODY SIZE - 3/8" WLL 2,000 LBS.






UTAS-100 BODY SIZE - 1.00" WLL 17,000 LBS.





Shackles & Threaded Locking Pin

Built tough - for daily use when connecting pull grips or other pullers to swivels

HD

D P

ull

ing A

cces

sori

es



Standard Pull Grips:

3/4" - 1 1/4" Size Range Available in Single, Double or Triple Weave Configurations

A Series

Part No. Size Range Work Load Apprx. Brk. Str. Weight Weave Mesh Length Eye

UTASW-18 3/4" - 11/4" 1,000 lbs. 3,000 lbs. 51/2 oz. Single 18" 3"

UTASW-24 3/4" - 11/4" 1,000 lbs. 3,000 lbs. 51/2 oz. Single 24" 3"

UTADW-18 3/4" - 11/4" 2,000 lbs. 6,000 lbs. 81/2 oz. Double 18" 3"

UTADW-24 3/4" - 11/4" 2,000 lbs. 6,000 lbs. 81/2 oz. Double 24" 3"

UTATW-18 3/4" - 11/4" 3,500 lbs. 10,000 lbs. 12 oz. Triple 18" 3"

UTATW-24 3/4" - 11/4" 3,500 lbs. 10,000 lbs. 12 oz. Triple 24" 3"

1 1/4" - 2" Size Range Triple Weave Configuration

B Series


UTBTW-26 1 1/4" - 2" 2,500 lbs. 7,500 lbs. 1 lb. 1 oz. Triple 26" 3 1/4"

UTBTW-32 1 1/4" - 2" 3,500 lbs. 10,500 lbs. 1 lb. 3 oz. Triple 32" 3 1/4"

2" - 2 3/4" Size Range Triple Weave Configuration

C Series


UTCTW-32 2" - 2 3/4" 3,500 lbs. 10,500 lbs. 1 lb. 4 oz. Triple 32" 3 1/2"

UTCTW-38 2" - 2 3/4" 4,500 lbs. 13,500 lbs. 1 lb. 11 oz. Triple 38" 3 1/2"

Wire Mesh Pull Grips - Standard

Manufactured from High-Fatigue Aircraft Strand steel cable and coated with a UV resistant plastic coating that increases the force and life of the grip

Pulling eyes on these grips are covered with aluminum tubing for a stronger & more durable attachment point

Copper tabs on tail end of grip add reinforcement to tail end of grip strands and ensure quick loading of product to be pulled.

Available in a variety of strength ratings and sizes for standard through severe-duty conditions

HD

D P

ullin

g A

ccessories



2 3/4" - 3 1/2" Size Range Triple Weave Configuration

D Series


UTDTW-38 2 3/4" - 3 1/2" 4,500 lbs. 13,500 lbs. 1 lb. 12 oz. Triple 38" 3 3/4"

UTDTW-46 2 3/4" - 3 1/2" 5,500 lbs. 16,500 lbs. 2 lb. 2 oz. Triple 46" 3 3/4"

3 1/2" - 4 1/4" Size Range Triple Weave Configuration

E Series


UTETW-46 3 1/2" - 4 1/4" 5,500 lbs. 16,500 lbs. 2 lb. 5 oz. Triple 46" 4"

UTETW-52 3 1/2" - 4 1/4" 6,500 lbs. 19,500 lbs. 2 lb. 13 oz. Triple 52" 4"

We offer many other pull grips in varying sizes, strengths and weave configurations, as well as, specialty fiber grips, multi-purpose grips, swivel-eye grips, swivel pullers and much more.

Wire Mesh Pull Grips - Standard

Manufactured from High-Fatigue Aircraft Strand steel cable and coated with a UV resistant plastic coating that increases the force and life of the grip

Pulling eyes on these grips are covered with aluminum tubing for a stronger & more durable attachment point

Copper tabs on tail end of grip add reinforcement to tail end of grip strands and ensure quick loading of product to be pulled.

Available in a variety of strength ratings and sizes for standard through severe-duty conditions

HD

D P

ull

ing A

cces

sori

es


Notes

No

tes


Notes

Vermeer is a registered trademark of Vermeer Manufacturing Company, Pella, IA Navigator is a registered trademark of Vermeer Manufacturing Company, Pella, IA Ditch Witch is a registered trademark of Charles Machine Works, Perry, OK JetTrac is a registered trademark of Charles Machine Works, Perry, OK All manufacturers’ names, symbols and descriptions are used for reference purposes only and none of the products listed are the products of these manufacturers’.

Note

s

“great tools any way you cut it”...jt1720 - verify specs ut1720m1track rubber track jt1720m1 -...

Documents