antivibratory adaptors schwingungsgedämpfte …snnk rrslr mshuhasn cosnr chm 580 reference...
TRANSCRIPT
-
www.mexintooling.comI34
Standard
0 1 2 3 4 5 6 7 8 9 10
0,50
0,45
0,40
0,35
0,30
0,25
0,20
0,15
0,10
0,05
0,00
A11.160.40.22/250
TOOLING SYSTEMS Antivibratory adaptors Din 69871-A
COMPARISON WHEN USING AN ANTIVIBRATORYTOOLHOLDER
FEE
D P
ER
TO
OTH
, mm
DEPTH /
Antivibratory
USING TEST RESULTS
Length / Shell End Mill / Insert / Grade /
Vibration reduced up to 60% compared to any other conventional shell mill adaptor, as they are manufactured with materials and mechanisms having antivibration properties.
SPECIAL FOR MOULD AND DIE MAKERS
Antivibratory adaptors
Standard
AUFNAHMEN SchwingungsgedÄmpfte Aufnahmen Din 69871-A
VO
RS
CH
UB
PR
O Z
AH
N, m
m
SCHNITTIEFE, mm
60% weniger Schwingungen im Vergleich mit anderen konventionellen Aufsteckfräsdornen, da diese Ausführung mit schwingungsdämpfenden Materialien und Mechanismen hergestellt wird.
BESONDERS EMPFOHLEN FÜR WERKZEUG-UND FORMENBAU
VERGLEICH ZWISCHEN EINER KONVENZIONELLEN UND EINER SCHWINGUNGSGEDÄMPFTEN AUFNAHME
Schwingungsgedämpft
PRÜFBEDINGUNGENLänge: 250 mm.
Eckmesserkopf: Ø 63 mmWendeplatte: APKT 16... Sorte: TIN 28
Schwingungsgedämpfte Aufsteckfräsdorne
I
-
I35
A11.160IKd1 h6 L2 L
A11.160.40.16/200-38IKA11.160.40.16/300-38IKA11.160.40.22/200-48IKA11.160.40.22/300-48IKA11.160.40.27/200-58IKA11.160.50.16/200-38IKA11.160.50.16/300-38IKA11.160.50.22/200-48IKA11.160.50.22/300-48IKA11.160.50.27/200-58IKA11.160.50.27/300-58IKA11.160.50.32/300-78IK
161622222716162222272732
200300200300200200300200300200300300
181281181281181181281181281181281281
100081000810010100101001210008100081001010010100121001210016
2,5103,3703,0704,8903,6304,3915,8866,2265,9006,8466,846
10,576
l1
171719192117171919212124
860168601686022860228602786016860168602286022860278602786032
111031110311004110041100511103111031100411004110051100511105
K ISO
404040404050505050505050
d2
383848485838384848585878
Antivibratory adaptors Din 69871-A TOOLING SYSTEMS
Characteristics: Cylindrical antivibratory shell mill adaptors. DIN 69871-AFor cutters with driving slot DIN 138.With internal coolant.
Reference
SchwingungsgedÄmpfte Aufnahmen Din 69871-A AUFNAHMEN
Eigenschaften: Zylindrische schwingungsgedämpfteAufsteckfräsdorne.DIN 69871-AFür Fräser mit Quernut DIN 138.Mit Innenkühlung.
Bezeichnung Kg
L2
K
l1
d1d2
L
I
-
www.mexintooling.comI36
A11.160d1 h6 L2 L
A11.160.40.16/150-38A11.160.40.16/200-38A11.160.40.16/250-38A11.160.40.16/300-38A11.160.40.22/150-48A11.160.40.22/200-48A11.160.40.22/250-48A11.160.40.22/300-48A11.160.40.27/150-58A11.160.40.27/200-58A11.160.40.27/250-58A11.160.40.27/300-58A11.160.50.16/150-38A11.160.50.16/200-38A11.160.50.16/250-38A11.160.50.16/300-38A11.160.50.16/400-38A11.160.50.22/200-48A11.160.50.22/250-48A11.160.50.22/300-48A11.160.50.22/400-48A11.160.50.22/500-48A11.160.50.22/200-60A11.160.50.22/250-60A11.160.50.22/300-60A11.160.50.22/400-60A11.160.50.22/500-60A11.160.50.27/200-58A11.160.50.27/250-58A11.160.50.27/300-58A11.160.50.27/400-58A11.160.50.27/500-58A11.160.50.32/200-78A11.160.50.32/250-78A11.160.50.32/300-78A11.160.50.32/400-78A11.160.50.32/500-78
16161616222222222727272716161616162222222222222222222227272727273232323232
150200250300150200250300150200250300150200250300400200250300400500200250300400500200250300400500200250300400500
131181231281131181231281131181231281131181231281381181231281381481181231281381481181231281381481181231281381481
10008100081000810008100101001010010100101001210012100121001210008100081000810008100081001010010100101001010010100101001010010100101001010012100121001210012100121001610016100161001610016
2,0302,5102,9203,3702,3703,0704,1804,8902,8503,6304,4405,3504,2304,3915,2805,8865,8866,2265,3305,9007,2768,4707,2767,8108,1409,240
12,2806,8467,1306,8466,8468,1407,5569,576
10,57613,07616,076
l1
17171717191919192121212117171717171919191919191919191921212121212424242424
86016860168601686016860228602286022860228602786027860278602786016860168601686016860168602286022860228602286022860228602286022860228602286027860278602786027860278603286032860328603286032
11103111031110311103110041100411004110041100511005110051100511103111031110311103111031100411004110041100411004110041100411004110041100411005110051100511005110051110511105111051110511105
K ISO
40404040404040404040404050505050505050505050505050505050505050505050505050
d2
38383838484848485858585838383838384848484848606060606058585858587878787878
TOOLING SYSTEMS Antivibratory adaptors Din 69871-A
Reference
Characteristics: Cylindrical antivibratory shell mill adaptors. DIN 69871-AFor cutters with driving slot DIN 138.
AUFNAHMEN SchwingungsgedÄmpfte Aufnahmen Din 69871-A
Bezeichnung
Eigenschaften: Zylindrische schwingungsgedämpfteAufsteckfräsdorne.DIN 69871-AFür Fräser mit Quernut DIN 138.
Kg
L2
K
l1
d1d2
L
I
-
I37
A11.160d1 h6 L2 L
A11.160.40.16/150A11.160.40.16/200A11.160.40.16/250A11.160.40.16/300A11.160.40.22/150A11.160.40.22/200A11.160.40.22/250A11.160.40.22/300A11.160.50.16/150A11.160.50.16/200A11.160.50.16/250A11.160.50.16/300A11.160.50.16/400A11.160.50.22/200A11.160.50.22/250A11.160.50.22/300A11.160.50.22/400A11.160.50.22/500A11.160.50.27/200A11.160.50.27/250A11.160.50.27/300A11.160.50.27/400A11.160.50.27/500
1616161622222222161616161622222222222727272727
150200250300150200250300150200250300400200250300400500200250300400500
131181231281131181231281131181231281381181231281381481181231281381481
1000810008100081000810010100101001010010100081000810008100081000810010100101001010010100101001210012100121001210012
2,2002,7103,2503,7402,6403,3204,0304,7504,6105,8865,9406,750
10,5405,7806,5507,380
10,42611,5306,5507,5008,600
10,67013,520
l1
1717171719191919171717171719191919192121212121
8601686016860168601686022860228602286022860168601686016860168601686022860228602286022860228602786027860278602786027
1110311103111031110311004110041100411004111031110311103111031110311004110041100411004110041100511005110051100511005
K ISO
4040404040404040505050505050505050505050505050
d2
3838383848484848383838383848484848485858585858
D
5050505050505050808080808080808080808080808080
Antivibratory adaptors Din 69871-A TOOLING SYSTEMS
Reference
Characteristics: Conical antivibratory shell mill adaptors.DIN 69871-AFor cutters with driving slot DIN 138.
SchwingungsgedÄmpfte Aufnahmen Din 69871-A AUFNAHMEN
Bezeichnung
Eigenschaften: Konische schwingungsgedämpfteAufsteckfräsdorne.DIN 69871-AFür Fräser mit Quernut DIN 138.
Kg
L2
K
l1
d1d2
L
D
I
-
www.mexintooling.comI38
800408004080060
110061100611012
11.165.40.4011.165.50.4011.165.50.60
11.165d1 g5 L l1
11.165.40.4011.165.50.4011.165.50.60
404060
607070
8989
129
2,5405,1907,010
d2
66,766,7
101,6
K ISO
405050
d3
M-20M-20M-30
G
M-12M-12M-16
G1
303040
TOOLING SYSTEMS
Reference
Characteristics: Adaptors for indexable milling cutters. DIN 69871-A / DIN 6357 - Form A
Reference
AUFNAHMEN Din 69871-A
Bezeichnung
Eigenschaften: Zwischenhülsen für Fräser. DIN 69871-A / DIN 6357 - Form A
Bezeichnung Kg
d3
G1d1d2 G
l1 L
K
I
-
www.mexintooling.comI106
A20.160d1 h6 L L2
A20.160.40.16/150-38A20.160.40.16/200-38A20.160.40.16/250-38A20.160.40.16/300-38A20.160.40.22/150-48A20.160.40.22/200-48A20.160.40.22/250-48A20.160.40.22/300-48A20.160.40.27/150-58A20.160.40.27/200-58A20.160.40.27/250-58A20.160.40.27/300-58A20.160.50.16/150-38A20.160.50.16/200-38A20.160.50.16/250-38A20.160.50.16/300-38A20.160.50.16/400-38A20.160.50.22/200-48A20.160.50.22/250-48A20.160.50.22/300-48A20.160.50.22/400-48A20.160.50.22/500-48A20.160.50.22/200-58A20.160.50.22/250-58A20.160.50.22/300-58A20.160.50.22/400-58A20.160.50.22/500-58A20.160.50.27/200-58A20.160.50.27/250-58A20.160.50.27/300-58A20.160.50.27/400-58A20.160.50.27/500-58A20.160.50.32/200-78A20.160.50.32/250-78A20.160.50.32/300-78A20.160.50.32/400-78A20.160.50.32/500-78
16161616222222222727272716161616162222222222222222222227272727273232323232
150200250300150200250300150200250300150200250300400200250300400500200250300400500200250300400500200250300400500
123173223273123173223273123173223273112162212262362162212262362462162212262362462162212262362462162212262362462
10008100081000810008100101001010010100101001210012100121001210008100081000810008100081001010010100101001010010100101001010010100101001010012100121001210012100121001610016100161001610016
2,1102,5603,0003,4502,7903,5004,2104,9203,6204,6605,6906,7304,7205,1605,6106,0606,9506,0506,7607,4708,890
10,3107,1108,1509,180
11,26013,3307,1408,1809,210
11,29013,3609,890
11,76013,64017,39021,140
l1
17171717191919192121212117171717171919191919191919191921212121212424242424
86016860168601686016860228602286022860228602786027860278602786016860168601686016860168602286022860228602286022860228602286022860228602286027860278602786027860278603286032860328603286032
11103111031110311103110041100411004110041100511005110051100511103111031110311103111031100411004110041100411004110041100411004110041100411005110051100511005110051110511105111051110511105
K ISO
40404040404040404040404050505050505050505050505050505050505050505050505050
d2
38383838484848485858585838383838384848484848585858585858585858587878787878
TOOLING SYSTEMS Antivibratory adaptors JIS B 6339-BT
Reference
Characteristics: Cylindrical antivibratory shell milladaptors. JIS B 6339-BTFor cutters with driving slotDIN 138.
AUFNAHMEN SchwingungsgedÄmpfte Aufnahmen JIS B 6339-BT
Bezeichnung
Eigenschaften: Zylindrische schwingungsgedämpfteAufsteckfräsdorne.JIS B 6339-BTFür Fräser mit Quernut DIN 138.
Kg
Ll1
d1d2
K
L2
I
-
I107
0 1 2 3 4 5 6 7 8 9 10
0,50
0,45
0,40
0,35
0,30
0,25
0,20
0,15
0,10
0,05
0,00
A20.160.40.22/250
A20.160d1 h6 L L2
A20.160.40.16/150A20.160.40.16/200A20.160.40.16/250A20.160.40.16/300A20.160.40.22/150A20.160.40.22/200A20.160.40.22/250A20.160.40.22/300A20.160.50.16/150A20.160.50.16/200A20.160.50.16/250A20.160.50.16/300A20.160.50.16/400A20.160.50.22/200A20.160.50.22/250A20.160.50.22/300A20.160.50.22/400A20.160.50.22/500A20.160.50.27/200A20.160.50.27/250A20.160.50.27/300A20.160.50.27/400A20.160.50.27/500
1616161622222222161616161622222222222727272727
150200250300150200250300150200250300400200250300400500200250300400500
123173223273123173223273112162212262362162212262362462162212262362462
1000810008100081000810010100101001010010100081000810008100081000810010100101001010010100101001210012100121001210012
2,5503,1503,7504,3502,7503,4304,1104,7906,5107,6308,7509,860
12,1008,1009,400
10,68013,26015,8408,790
10,31011,83014,87017,920
l1
1717171719191919171717171719191919192121212121
8601686016860168601686022860228602286022860168601686016860168601686022860228602286022860228602786027860278602786027
1110311103111031110311004110041100411004111031110311103111031110311004110041100411004110041100511005110051100511005
K ISO
4040404040404040505050505050505050505050505050
d2
3838383848484848383838383848484848485858585858
D
5050505050505050808080808080808080808080808080
Standard
TOOLING SYSTEMSAntivibratory adaptors JIS B 6339-BT
Reference
Characteristics: Conical antivibratory shell milladaptors. JIS B 6339-BTFor cutters with driving slotDIN 138.
COMPARISON WHEN USING AN ANTIVIBRATORYTOOLHOLDER
FEE
D P
ER
TO
OTH
, mm
DEPTH /
Antivibratory
USING TEST RESULTS
Length /Shell End Mill /Insert /Grade /
Vibration reduced up to 60% compared to any other conventional shell mill adaptor, as they are manufactured with materials and mechanisms having antivibration properties.
SPECIAL FOR MOULD AND DIE MAKERS
SchwingungsgedÄmpfte Aufnahmen JIS B 6339-BT AUFNAHMEN
Bezeichnung
Eigenschaften: Konische schwingungsgedämpfteAufsteckfräsdorne.JIS B 6339-BTFür Fräser mit Quernut DIN 138.
VERGLEICH ZWISCHEN EINER KONVENZIONELLEN UND EINER SCHWINGUNGSGEDÄMPFTEN AUFNAHME
VO
RS
CH
UB
PR
O Z
AH
N, m
m
SCHNITTIEFE, mm
Schwingungsgedämpft
60% weniger Schwingungen im Vergleich mit anderen konventionellen Aufsteckfräsdornen, da diese Ausführung mit schwingungsdämpfenden Materialien und Mechanismen hergestellt wird.
BESONDERS EMPFOHLEN FÜR WERKZEUG- UND FORMENBAU
PRÜFBEDINGUNGENLänge: 250 mm.
Eckmesserkopf: Ø 63 mmWendeplatte: APKT 16... Sorte: TIN 28
Kg
Ll1
d1d2
K
L2
D
I