anti-slip crystal satinato microcrystal pgr super technology glazed porcelain with a polished...
TRANSCRIPT
ANTI-SLIP
CRYSTAL
SATINATO
MICRO
Representing
INNOVATIVE PRODUCTION TECHNOLOGIES
The porcelain industry is constantly developing, offering us, manufacturers, new material to improve the product quality.
ANTI-SLIP ASR / AMR
CRYSTAL PGR Super
SATINATO SGR / SLR
MICRO Rm
We represent 4 innovations of the porcelain industry thathave been successfully tested and are being prepared for
release at our enterprise in the near future
Structural and matte surface with anti-slip effect
Super polished surface
Satin surface for glazed and technical porcelain
Finest edge processing
These technologies are directed to create the PROFESSIONAL-QUALITY
products, as part of the “PRO” program implemented at our enterprise. Launched since September 2018
ANTI-SLIP
АSRАМR МАТTANTI-SLIP
TECHNOLOGY
The anti-slip effect is achieved by applying special particles to the porcelain surface prior kiln firing.
Non-slip facing material has a wide range of application.Most tiles are used in-door or under cover.
We offer porcelain stoneware that is ideal for open spaces
Our surfaces identification:
STRUCTURALANTI-SLIP
*Any article of Product Program can be made with this surface
MOST OFTEN ANTI-SLIP PORCELAIN TILES ARE NEEDED FOR FINISHING:
Water and SPA areas
Bathrooms and walk in showers.
Kitchens.
Hallways, corridors, balconies in the apartments and houses
Outdoor territories, stairwells, ramps and patios.
Hospitals and health resorts.
Catering facilities
Shopping and utility areas in malls.
Office premises.
Hotels and entertainment complexes.
This finishing is used in any other areas, wherever it is necessary to observe increased safety measures or there is an INCREASED RISK OF INJURIES
MR
АМR
АМR АМR
WHAT WAS ACHIEVED:Slip resistance – R12 (Test method DIN 51130)The surface does not shine, is matteThe surface is washed with waterThe surface keeps its anti-slip properties, even being wetThe surface has high abrasion resistance – means it is long-livedThe sprinkles only slightly change the tile design
Anti-slip test GRANULE (anti-slip)
Anti-slip test, being wet, GRANULE (anti-slip)
The lab abrasion resistance test at 2100 rpm PROTECTION
The lab abrasion resistance test at 18000 rpm GRANULE(anti-slip)
CRYSTAL
PGR Super
TECHNOLOGY
Glazed porcelain with a polished surface is widely represented on the market.But polished glaze had a significant disadvantage – after polishing the surface used to get
dirty and required special protection with chemical agents which did not last for long. Today we offer a new generation of glazes.
Our surfaces identification:
PGRPGR
PGR Super PGR Super
CRYSTAL-A NEW GENERATION OF POLISHING GLAZES
Has a special structure that does not leave pores after polishing, which prevents the ingress of dirt.
Has a high rate of light reflection after polishing, which makes the design looks more deep and beautiful.
The glazes are transparent, which allows high-quality polishing of dark designs.
SATINATOTECHNOLOGY
Among architects and exacting developers a new type of polished surface “Satinato” is gaining popularity.
This effect is achieved by polishing the glaze and technical porcelain stoneware with special abrasives.
This type of processing is usually used in Premium segment interiors.
SLR
SLR
SGR SLR
PLR
WHAT ATTRACTIVE ABOUT PORCELAIN STONEWARE WITH SATIN FINISHHas a soft, subdued brilliance and depth
Soft and velvety to the touch (fabric effect)
The interior revetted with “satin” acquires a unique style and looks expensive.
Our surfaces identification: Satin surface of technical porcelain Satin surface of glazed porcelain
MICRO
Rm
TECHNOLOGY
Bevelling – processing the outer side of the sharp edge, which is formed after porcelain tiles cutting (rectification).
Processing is done to prevent cuts during operation.
Standard beveling is 1-1,5 mm. wide (taking into account the allowed plate deformation, its width is not the same along the length).
Our surfaces identification for Micro bevelling is:
SR SR
SRm SRm
NEW MICRO BEVELING TECHNOLOGY “MICRO” ALLOWS:
Obtain the beveling thickness of 0,5 mm, while keeping all the protective properties.
Maintain the same thickness along the entire plate length.
Reduce joint sizes during plates' installation.