Antenna Options

UHX10-59 125 mph (200 km/h)WUHX10-59 155 mph (250km/h)SUHX10-59 200 mph (320km/h)

UHX10-59 Standard PaintEUHX10-59 Corrosive enviroment paintWEUHX10-59 High wind and corrosive

enviroment paint

All antenna orders require option codes to specify thedetails for your system. Most antennas include options forselecting feed input types, paint color, radome, packing,and environmental offerings. These option codes areunique characters placed before (prefix) or after (suffix)the base antenna type number. Prefix codes are optional.Suffix codes are required.

Prefix Option Codes The prefix option codes include special environmentaloptions such as high wind and corrosive environment.For additional information about special environmentantennas, request Bulletin 3522.

High Wind Environment OptionsHigh wind options that exceed the standard 125 mph(200 km/h) wind survival rating are available in 155 mph(250 km/h) and 200 mph (320 km/h) survival rating.These heavy duty antenna versions feature strong backstructures for maintaining alignment accuracy in adverseand severe wind conditions.Use the “W” prefix for 155 mph (250 km/h), and the “S”prefix for 200 mph (320 km/h) survival ratings.

Corrosive Environment Options The corrosive environment option is available for mostantennas. This option provides long term protection inmarine or salt and most industrial environments includingchemical and fossil fuel areas. A special epoxy paintapplied at the factory provides added protection. Inaddition, corrosion inhibiting compounds and protectivesealants are applied during installation.Note: High wind and corrosive environment prefix codesare optional.

Suffix Option Codes Suffix option codes are required for your antenna order.The suffix option code is made up of three characters.The first character indicates the feed input type, the secondcharacter indicates the antenna color and applicableradome information, and the third character indicates thepacking options.

 

Antenna Options

The option code’s first character, indicating connector orflange type, has no default. You must specify a flange typefor each antenna ordered. The remaining option codes,indicating antenna color, radome, and packing, are optional.If you do not specify a code for the second and thirdcharacters you will receive the default.

Note: Not all connector and flange types listed are applicablefor all antennas. Refer to the antenna input optionslisted in each antenna ordering table. Additional optionsavailable. Contact Andrew.

Antenna Input Options CodesCoaxial ApplicationsConnector Type Option Code7/8" EIA E"F" Flange Female F7/16 DIN Female HType N Female NWaveguide ApplicationsFlange Type Option CodePBR BPDR DWR75 CCPR PUG* U*Compatible with choke or coverAntenna Color/Radome Option CodesAntenna Color Radome

Type/Color* Option Code

Gray Hypalon/White 1Gray Teglar/White 3Gray Not Available 3

Unpainted Not Available W (for GRIDPAK)

Gray** Molded/Gray X

* All radomes listed have Andrew logo.** UNIPAK includes the radome and antenna in a single container.Solid reflectors available for 2 ft to 10 ft, not available for 12 ft,15 ft or any split two piece reflectors.For additional color information see Catalog 38 pages 116-117.For additional radome information see Catalog 38 pages 116-119.

 

Type Number with Option Code: UHX10-59-PDescription: UHX10-59 antenna with

CPR flange

 

 

Type Number with Option Code: UHX10-59-P3Description: UHX10-59 antenna with

CPR flange, painted graywith white TEGLAR radome

 

 

Type Number with Option Code: UHX10-59-P3ADescription: UHX10-59 antenna with

CPR flange, painted graywith white TEGLAR radome,Standard Global Pack

Packing Option CodesPacking Option CodeStandard Global Pack AStandard Global Pack forTwo-Piece Split Reflector or GRIDPAK M