ansi z136.1-cdv status on updates for next revision & work ...american national standard z136...

Copyright © 2012 Rockwell Laser Industries

ANSI Z136.1-CDVStatus on Updates for Next Revision

& Work by TSC-4 Committee on Control Measures and Training


American National Standard Z136 Series

Z136.3

Health Care Facilities

Z136.4

Measurements

Z136.5

EducationalInstitutions

Z136.7

Laser Protective

Equipment

Z136.6

Outdoors

Z136.1 for Safe Use of Lasers


The Newest Member of the ANSI Z136 Series

ANSI Z136.8 (2012)Safe Use of Lasers in Research,

Development or Testing


DRAFT Standards

Z136.9

Manufacturing

Z136.10

Entertainment, Displays & Exhibitions

Z136.1 for Safe Use of Lasers


SSC-1 CDV (June 2012)


Proposed Changes in CDV of Z136.1

Changes Throughout Document

• Units changed to nanometers for all wavelengths shorter than 2,999 nm (180 nm to 2,999 nm) and microns for longer wavelengths (3 µm to 1,000 μm).

• Tables within the text of the document have been renumbered with a dash (e.g. Table 1-1 is the first table in Section 1). Tables after the normative text portion are now numbered Tables 1- 11.



• Section 1: General– Statement that vertical standards

take precedence over this document (within the scope of that standard).

• Section 2: Definitions– Added some new definitions, for

example:• Laser Controlled Area (LCA)• Engineering control measure

– Deleted some definitions, for example:• Scintillation

Dot 1Dot 6



Section 3: Hazard Evaluation and Classification

Included optics transmission in hazard classification of lasers (explicitly done by including

them in Section 3.2.3.4.2(2) and Table 9)



Section 4: Control Measures

• Section completely re-written and re-arranged• Use of laser eye protection for Class 3B is proposed

as required (shall) instead of advisory (should) – see Section 4.4.4.2 and Table 10c

• Proposed change to the time base for LEP selection (recommendation) to be 100 seconds for UV intrabeamexposures (see Table 2)

• Changes in signage to really be Z535.2 compliant




• Hierarchy of control measures:– Engineering controls– Administrative controls– PPE

(PPE was treated partially as an administrative control in 2007 edition)




• Emphasizes that most engineering controls should have been instituted by the manufacturer of the laser product under the FLPPS so that user will seldom need to apply additional engineering controls or labels on laser products.

• ANSI Z136 engineering controls are generally relevant to systems developed or modified for in-house use only.



• 2007 Section 4: Control Measures– 4.1 General Considerations– 4.2 Subst. Alternate

Controls

• 201x Section 4: Control Measures– 4.1 General Considerations– 4.2 Subst. Alternate Controls

Engineering Controls

Administrative Controls

Personal Protective Equipment



• 2007 Section 4: Control Measures– 4.3 Engineering Controls– 4.4 Admin/Proc. Controls– 4.5 Spec. Considerations– 4.6 Protective Equipment– 4.7 Area Warning Signs &

Labels

• 201x Section 4: Control Measures– 4.3 Manufacturer Control

Measures (note – this section is now only one paragraph in the CDV)

– 4.4 User Control Measures• 4.4.1 General• 4.4.2 Engineering Controls

(note – for internal systems only)

• 4.4.3 Administrative Controls• 4.4.4 PPE

– 4.5 Special Considerations– 4.6 LCA Warning Signs &

Equipment Labels



Section 4.4.3.5 Indoor Laser Controlled Area

• Basically the same area requirements as in 2007 edition for Class 3B/4

• Change: Now includes Temporary Laser Controlled Area, that is, the same control measures apply whether the LCA is normally Class 3B/4 or if Class 3B/4 conditions exist only temporarily.



Section 4.6: LCA Warning Signs & Equipment Labels:

Now ANSI Z535.2 Compliant

• 4.6.3.1 DANGER Signs.– Extremely high power or high pulse energy

Class 4 with exposed beams

• 4.6.3.2 WARNING Signs.– Class 3R, 3B, and most Class 4

• 4.6.3.3 CAUTION Signs.– Class 2, 2M

• Three panel design, can be “portrait” instead of “landscape” format as shown



Section 4.6: LCA Warning Signs & Equipment Labels:Now ANSI Z535.2 Compliant

• (NOTICE Sign)“This signal word shall not be associated directly with a hazard or hazardous situation and must not be used in place of DANGER or CAUTION.” ANSI Z535.2

• Can be used in conjunction withLaser Controlled Area sign( DANGER or WARNING )

(ANSI Z136.1-2007 version)



• Section 5: Education and Training• No significant changes

• Section 6: Medical Examinations• Significant portions of text removed and clarified

(both text and appendix)

• Section 7: Non-Beam Hazards• Section completely rewritten



• Section 7: Non-Beam Hazard (NBH)

• More clearly defines what is (and is not) a NBH:“Non-Beam Hazards (NBH): All hazards arising from the presence of a laser system, excluding direct human exposure to direct or scattered laser radiation.”

• Resolves previous internal consistency issues (e.g. clarifies “collateral” versus “laser target interaction” radiation)

• Reorganized to streamline, eliminate redundancy, etc.• Addresses emerging hazards (e.g. nano, fiber particles)• Added useful tools (e.g. Irradiance Dependence Table)



• Section 8: Criteria for Exposures of Eye and Skin

– Changes to MPEs• Previous Tables 5a & 5b (Ocular MPEs) become Tables 5a-5f• Previous Table 6 (Parameters and Correction Factors) becomes

Tables 6a-6c• tmin (thermal confinement time) is reduced• αmax (angular subtense) is time dependent• CP (multiple pulse reduction factor) depends on both α and

number of pulses• Table 7 (Skin MPEs) becomes Tables 7a-7c



• For Further Information:

See the abstract of Schulmeister, Karl; Stuck, Bruce E.; Lund, David J.; Sliney, David H, “Review of Thresholds and Recommendations for Revised Exposure Limits for Laser and Optical Radiation for Thermally Induced Retinal Injury”, Health Phys 100(2), 210-220 (2011).


Changes to NIR MPEs



• Section 9: Measurements- No significant changes

• Tables:- Renumbered and updated- Separate tables for Engineering,

Administrative, and PPE control measures



• Appendix B “Calculations for Hazard Evaluation

and Classification” – updated to reflect

changes in standard

• Appendix C “Hazard Evaluation, Classification and Control Measures” – Now called “Selected

AELs and MPEs”– Alternate labeling

moved to Appendix D– Laser protection

damage threshold moved to Appendix D

Appendices:



• New Appendix D:“Information on Laser Products and Control

Measures”– Laser product requirements– Alternate signage and labeling

(“grandfather clause”)– Laser protection damage

threshold evaluation (formerly in Appendix C)

• Appendix E :“Guide for Organization and Implementation of Employee

Laser Safety Training Programs”

- Essentially the same as previous Appendix D)

Appendices:



Appendices:

• Appendix E “Medical Examinations– restructured

• Appendix F “Non-Beam Hazards”– reduced to informative material on LGACs– other general NBH content relocated to Section 7

• Appendix G “Biological Effects of the Eye and Skin”– updated


Thank you

ansi z136.1-cdv status on updates for next revision & work ...american national standard z136...

Documents