Adjustable Triple Head Bicycle Light

Features• Patent protected, triple head, adjustable beam-angle bicycle light with 180 degree rotatable side lights• Extra large illumination area leaves NO DARK SPOTS IN FRONT OF OR AROUND YOUR BICYCLE for improved safety on uneven surfaces• Ultra compact and lightweight primary LED with long throw beam combine with dual high CIR natural white LED side floodlights for better visualization of road conditions• Primary light and sidelights are switched on independently so you can choose as many modes as required for environmental and runtime needs• High output 1280lm, max runtime is 46 hours• Switch on and off using either the dual switch on the top of the flashlight body or the remote switch. Affix the remote switch to the bicycle handle for fast, convenient mode changing without lifting your hand; Change beam strength instantly by lightly depressing the switch to alert vehicles or pedestrains of your approach.• Newest smart temperature control system protects the LEDs and internal components to ensure safety and stability.• Battery capacity indicator light shows remaining charge, enabling you to control your ride time by choosing your mode according to the battery capacity • Reverse-battery protection prevents damage to both flashlight and battery• Aircraft aluminum body and battery holder, CNC precision machined cell, Military grade III hardened anodic oxidation, compact and rugged with rapid heat dissipation through heat-sink• Main light has tempered glass with AR film plating for durability and scratch resistance. Side lights have optimized optical lenses for uniform intensity• IPX-6 water-resistant standards protect against splashing and heavy rain.

This tiny but bright, safe and reliable bike light is your best choice for cycling on- or off-road, whatever the terrain

Specifications• Main light: Utilizes CREE XM-L2 U2 LED for a maximum output of 1000 lumens Side lights: Utilize CREE XP-G2 LEDs for a maximum output of 280 lumens Main Light has 3 lighting modes and 2 flashing modes, side light has 3 lighting modes

• • Headlamp: 58.8mm(2.31")(Head diameter) *54.3mm(2.14") (Body diameter) *25.5mm(1.00")(Length) Battery case: 94.5mm(3.72")(Length) *48.5mm(1.91")(Width) *27mm(1.06")(Height)• Net Weight: Headlamp 96g; battery case 150g(excluding battery)• Working voltage: 5-8.4V• Lens: Toughened ultra-clear mineral glass with anti-reflective coating • Material: Aircraft grade aluminum• Body colour: Black • Water proof: IPX-6 for use in adverse weather conditions• Included accessories: Handlebars mounting O-ring *2, O-ring for battery case*1, Holster for battery case*1, Cable Ties for holster*1, Remote switch*1, Velcro strap*1, Battery case*1

Notice: The above data has been measured in accordance with international flashlight testing standards ANSI/NEMA FL1 using two 3.7V 18650 3400mAh batteries under laboratory conditions. The data may vary slightly during actual use due to battery type, individual usage habits and environmental factors. KLARUS is a member of PLATO, participating in and helping to develop the ANSI/NEMA FL1 standard of measurement. Product testing data is in accordance with these internationally recognized scientific standards

OperationsA: Main switch Controls the primary light)• While OFF: Lightly depress switch to activate constant-ON, depress 1 second for OFF

Battery: 2x 18650 (use of 16340 batteries is not recommended)

: (

• While ON: Lightly depress switch to change Mode (Low /Med/High)• While unlocked: From ANY mode: Fast double-press to activate STROBE, and then press the switch again to go back to original state. From STROBE mode: Fast double-press to activate SOS, and then press the switch again to go back to STROBE.• Lock function: Depress and hold down the switch for 5 seconds (from ANY mode) UNTIL the main light flickers twice. The light is now locked. (If the light flickers three times when pressing the switch, indicates that it has been locked)• To unlock: Depress the switch three times in quick succession and the light will again flicker twice to indicate that it is active.

B: Secondary switch : (For side lights) • While OFF: Lightly depress switch to activate constant-ON• While ON: Long depress switch 1 second for OFF• While ON: Click switch to change MODE (Low /Med/High)• Lock function: Depress and hold down the switch for 5 seconds (from ANY mode) UNTIL the main light flickers twice. The light is now locked. (If the light flickers three times when pressing the switch, indicates that it has been locked)• While locked: Depress the switch three times in quick succession and the light will again flicker twice to indicate that it is active.

C: Memory function When a lighting mode is on for any time, the mode will be memorized. The device will return to that mode when next turned on.

D: Remote control switch Circular switch: ON/ OFF: Click the switch for ON, Long press it for OFF Mode change: When ON, click the switch for mode change (Only for Main light) (When click for ON, both main light and side light be ON, the mode is the memorized mode. When long press for OFF, only for the main light, the side light won’t be off.) Rectangular switch： For changing beam strength instantly by lightly depressing the switch to alert vehicles or pedestrians of your approach, depress the switch several times in quick succession and the light will flicker to alert

Battery IndicatorWhen light is turned on, the battery indicator lights on the switches will flash for 5 seconds then turn off.Green indicator : 70%-100% charge Orange indicator: 30%-70% chargeRed indicator: less than 30% chargeWhen the battery has only about 10% power remaining, the indicator light on the main switch will illuminate RED and flash continuously until the main light turns off automatically. The side lights will continue shining but will flicker twice every 3 minutes until the charge is drained or the lights are switched off. Note: The battery indicator status works only if you are using 18650 Li-ion battery.

Side lights Angle adjustment

Battery replacement

Unscrew and open the battery case, install the batteries in the correct direction, then replace cap and tighten.

Bike light Installation

Usage and Maintenance • Do not shine light directly into eyes• Use only quality brand name batteries. • Remove batteries when stored for extended periods• Use soft brush and soapy water to clean the body of the light• To maintain waterproof condition, please lubricate the O-ring with resin or oil and replace worn O-rings as needed

Warranty Service KLARUS guarantees the flashlight against defects in material and workmanship. Flashlight products that are found to be defective under normal use within 5 years of the proof of purchase date will be repaired or replaced without charge. This warranty does not cover damage caused by accident, unreasonable use or product alteration. Failure to follow the general maintenance directions could result in damage to your flashlight that may not be covered by the KLARUS warranty

If this flashlight should prove defective, the product will be repaired or replaced, under the above terms. Please contact KLARUS or your original KLARUS dealer for warranty return instructions

可调节照射角度的三头自行车灯

BK30

特点• 可调节照射角度的三头自行车灯，双侧灯可180度旋转，专利保

护！

• 超大照射面积，车前车身再无黑暗区域，明亮无死角，可轻松应

对各种复杂的路面

• 灯头小巧轻便，主灯聚光远射，侧灯泛光，侧灯选取显色性强的

中白光LED，路面更清晰

• 主侧灯独立控制，可根据使用环境和续航需要，开启一个，两

个，或三个灯，或搭配不同档位

• 高亮1280流明，最长续航46小时

• 机身顶部双开关和线控开关两套开关控制系统，任意选择。手握

把手位开关机，更便捷。线控开关可有明暗变化，警示前方行人

或车辆的

• 智能温控系统，亮度随温度变化自动调节到最佳状态，以保证产

品安全稳定的运行，并最大限度的保护LED及内部元器件，更可

靠更安全

• 智能电量指示功能，显示剩余电量，根据剩余电量设定所需档

位，骑行时间自由掌控

• 防反接设计，防止电池装反对电路造成危害

• 航天级铝合金材质车灯及电池盒，CNC机加工外壳，军工三级硬

质阳极氧化处理，耐磨更轻更坚固,散热更可靠

• 主灯镜片采用钢化玻璃，镀AR膜，防刮耐磨，侧灯采用优化的光

学透镜，泛光均匀

此款自行车灯，达到又小又亮更安全更可靠的新境界。不管是森

林公园穿梭，还是在山地越野，高山速降，BK30将是您最合适的

选择。

规格 • 主灯：使用CREE XM-L2 U2 LED，寿命50000小时

侧灯：使用CREE XP-G2 LED，寿命50000小时

• 电池：使用2节18650电池(建议不要使用16340锂离子充电电

池）

• 灯头：58.8mm(头直径)*54.3mm(身直径)*25.5mm(长)

电池盒：94.5mm(长)*48.5mm(宽)*27mm(高)

• 主灯3种亮度模式、2种闪烁模式，侧灯3种亮度模式

• 净重：灯头96克；电池盒150克（不含电池）

• 工作电压：5-8.4V

• 反光杯：新设计反光杯，兼顾聚光和泛光，光斑完美

• 镜片：增韧超清晰钢化玻璃镜片，防刮耐磨

• 材料：航天级铝合金材质并经过军工三级硬质阳极氧化处理

• 颜色：黑色

• 防水IPX-6设计，可在暴雨中正常使用

• 配件：车夹O圈*2，电池盒O圈*1，电池盒布套*1，布套扎带

*1，控制线*1，魔术扎带*2，电池盒*1

备注：以上参数是按照国际手电筒测量标准ANSI/NEMA FL1所述

之方法测量所得，所使用电池为2节3400mAh 18650电池，实际

数据可能会随着不同电池或使用环境而产生影响。

KLARUS是美国手电行业协会(PLATO)的成员，参与制定和优化

ANSI/NEMA FL1手电标准，产品测试数据标准科学。

操作说明

主按键：（控制主灯）

关机状态：

• 单击开机，长按1秒关机；

• 无锁定状态下长按5秒锁定所有按键功能，到5秒时主灯闪烁两次

提示锁定成功（锁定后单击按键指示灯闪烁三次证明已锁定）；

锁定状态下, 单击三次将解锁并恢复按键功能, 主灯闪烁两次提示

解锁成功

开机状态

• 单击换挡，低、中、高循环；关机记忆当前档位；下次开机进入

记忆档位

• 任何解锁状态双击进入爆闪，单击返回原状态，在爆闪模式下快

速双击进入SOS，单击退回进入状态；

副按键：（控制侧灯）

• 单击开机，长按1秒关机；

• 开机状态单击换挡，低、中、高循环；关机记忆当前档位；下次

开机进入记忆档位

• 无锁定状态下长按5秒锁定所有按键功能，到5秒时主灯闪烁两次

提示锁定成功（锁定后单击按键指示灯闪烁三次证明已锁定）；

锁定状态下, 单击三次将解锁并恢复按键功能, 主灯闪烁两次提示

解锁成功

备注：两个按键独立控制。（主体两个按键有锁定和解锁功能，

线控没有此功能）

线控开关圆形开关：单击开机，单击换档，长按关机（单击开机时，主副

灯全亮，档位为记忆档位；单击换挡只能控制主灯亮度变化；长

按关机只能关掉主灯）

长条按键：按住会变换亮度，松开后返回原状态（连续单击长条

按键会形成闪烁效果，以达到提示前方行人或车辆的目的）

电量指示• 开机后灯头按键指示灯显示5秒，5秒后关闭

• 绿色，表示剩余电量70%-100%

• 橙色，表示剩余电量30%-70%

• 红色，表示剩余30%以下

• 电量在10%的时候指示灯红闪，并且关闭主灯，侧灯每3分钟闪

烁两次

注：此电量显示只针对18650锂离子电池

侧灯调节角度示意图

电池更换

旋开锁紧螺母，将电池按照电池盒标识方向装入，旋紧锁紧螺母

即可工作

自行车灯安装

保养及注意事项• 使用柔软干净的干布擦拭自行车灯的表面。使用干净的软布来清

洁镜片的指纹与灰尘

• 为达到最佳防水性能，请定期检查防水O圈的完整性，并请适量

涂抹润滑硅脂于防水O圈上以延长其使用寿命。如O圈损坏，请及

时更换原厂O圈以确保您所使用之产品的优异防水性能

• 请勿将自行车灯的光线直接照射人类或动物的眼睛

• 长时间不使用自行车灯时，请将电池从自行车灯内部取出，妥善

存放

保修• 15天保换期：自售出之日起15天内，在正常使用情况下，出现产

品质量问题，客户可选择更换新品或修理服务,要求更换时，所换

产品应为返修产品同型号同规格的新品；如同型号同规格的产品

停止生产时，则调换不低于原产品性能的同品牌产品

• 5年免费保修期：自售出之日起5年内，用户在正常使用情况下，

出现产品质量问题，则享受免费维修服务

• 终身有限保修：在超过5年免费保修时间外，提供有偿保修，费

用以实际更换材料费用为准，不另收取人工费用

最高光强度(cd)

高亮档射程(m)

防跌落(m)

防水级别 IPX6级防水

25900

161

1

ANSI/NEMA Fl1

主灯

亮度(LM)

侧灯

亮度(LM)

备注SOS爆闪低亮

350

140

90

50

1000

中亮高亮

3501000

280

7h

19h

29h

46h

4h40min续航时间(h)

续航时间(h)

2h20min

10h

21h

主侧灯

全开最

高续航

时间：

2h

副按键

主按键

侧灯可180°旋转

+

-

BK30

StrobeModeSpecification

Peak beam intensity(cd)

Max beam distance(m)

Impact resistance(m)

Waterproof

Runtime(h)

High Middle Low

IPX6

25900

161

1

Primary light

ANSI lumens(LM)

All lights on

350

140

90

50

1000 3501000

280

7h

19h

29

46h

4h40min2h20min

10h

21h

Ru

nti

me

(h):

2h

SOS

Side lights

ANSI lumens(LM)

Runtime(h)

180 degree rotatable side lights

Secondary switch

Main switch

+

-

关注微信 淘宝购买进入官网 京东购买

KLARUS LIGHTING TECHNOLOGY CO., LIMITED

Website Facebook

Office Address: Room 521-525, Zhihuigu Innovation Park, 1010 Bulong Road, Longhua District, Shenzhen City, 518131,China

Factory Address: 5/F, No.26 Building, Niulanqian Industrial Park, Longhua District, Shenzhen City, 518131, China

Email:info@klaruslight.com Phone:+86-755-27700110

Website: www.klaruslight.com

深圳市凯瑞兹电子科技有限公司

工厂地址：深圳市龙华新区民治牛栏前工业区26栋5楼

邮编：518131

电话：+86-755-27700110

网站：www.klaruslight.cn

：

写字楼地址：深圳市龙华新区布龙路1010号智慧谷创新园大楼521-525

邮箱 info@klaruslight.com