1

Annual Report for the TECS Department For the period, July 1, 2016 - June 30, 2017

Notes: Please keep within an eight-page limit. Feel free to add concise appendices as needed. Please avoid duplicating information in the main body of the report. If a section is not applicable to your unit, insert “N/A.”

Executive Summary The Textile Engineering, Chemistry & Science Department continues to be a major contributor to the College of Textiles vision of being the global leader in textile education, research, and innovation. The high level of faculty and student honors and awards demonstrate the quality and success of TECS programs and the substantial research output indicates the impact of faculty and students on global textile knowledge. The attached appendix lists detailed information on faculty publications and presentations. Enhance the success of our students through educational innovation

Senior design course for TE/TT students incorporates academic and recurring industrial inputs

The NC State SACS accreditation resulted in the development of a quality enhancement plan (QEP), and the theme for the next 10 years is Creative and Critical Thinking, now called Th!nk. The TE program faculty has decided to be one of the pilot programs for vertically integrating creative and critical thinking throughout the curriculum. Six TE faculty went through training in May to implement in TE 105, TE 110, TE 303, TE 463, TE 404, TE/TT 401, TE/TT 402. This year George Hodge (TT 486) and Jon Rust are going through Think training.

Enhance scholarship and research by investing in faculty and infrastructure

Dr. Kevin Golovin hired as an Assistant Professor and will start in Fall 2018

New TE position approved and search committee formed to search for in the Fall.

The college invested in the new departmental office layouts to foster more interaction as well as additional offices as the departments grow.

Enhance interdisciplinary scholarship to address grand challenges of society

The University defines the Grand Challenges of Society to be health and well-being, educational innovation, energy and environment, and safety and security.

Health and well-being: TECS faculty (Emiel DenHartog) working with TATM, CNR, and CALS faculty to develop materials that provide mosquito bite proof function while being comfortable and/or functional in their use

Health and well-being: TE/TT Faculty member (Jess Jur) and his research term is developing products directly associated with 'Advancing Health Informatics'. They have employed low cost strategies toward vigilant health monitoring which provide a paradigm shift for the broad dissemination of the health care.

Energy and environment: TE/TT Faculty member (Jess Jur) has been involved with the NC State GRIP on Nanomaterials for Water Resource Improvement, for which his team has begun to worked with NC State and RTI researchers on new technologies for water purification (Provide access to clean water).

TE and ECE students developed a “smart shirt” to monitor dehydration

Health and well-being: TE and ECE students developed a canine “smart shirt” to monitor EKG, heart rate and breathing

Energy and environment: Erica Ford working with Terrence Gardner in Soil Science on the use of nonwovens to support water remediation

2

Energy and environment: PCC Faculty (Richard Kotek) working to develop a process that will allow to produce fuels by selective catalytic degradation of polyethylene (used for making grocery bags) and polyolefins.

Energy and environment: TE Faculty member (Xiangwu Zhang) is developing high-capacity, long-life lithium-sulfur batteries for high-performance energy storage.

Educational innovation: vertical integration of QEP critical and creative thinking into TE program

Educational innovation: TE faculty member (Warren Jasper) is using Raspberry Pis as a low-cost high-reliability tool for taking and acquiring data than can be later analyzed and visualized. He has been using this in several classes.

Enhance organizational excellence by creating a culture of constant improvement

ABET accreditation document completed for TE program Enhance local and global engagement through focused strategic partnerships

Hanes-NCSU Partnership being renewed for $1,000,000 for four year

Changes in service environment

Renovation of department offices required office staff and administrators to relocate March – July 2016

Major initiatives and/or changes to programs or activities

Emphasis on increasing domestic graduate student enrollment Diversity initiatives and progress

TECS and Student Services are developing textile diversity camp for Fall 2016 Instructional program advances

200 on-campus courses taught for 4200 students: 3635 by faculty (193 for 4267 in 2015-2016)

52 distance courses (TOP) taught for 405 students (compared to 59 for 460 in 2015-2016)

232 Special Topics courses (Graduate Research) (up from 222 in 2015-2016) Research volume and achievements of significance

13 new non-government sponsored research projects (44 non-government sponsored projects)

8 new government sponsored research projects (17 total current government sponsored research)

$2,881,747 new research dollars (up from $1,799,851 in 2015-2016)

$2,090,625 research expenditures (down from $2,276,569 in 2015-2016)

134 refereed publications up from 112 in 2015-2016, 38 with two or more TECS faculty authors

10 non-refereed publications (down from 23 in 2015-2016) 4 with two or more TECS faculty authors

12 book chapters written (up from 9) in 2015-2016

1 book edited (same as 2015-2016)

1 patent issued (down from 4 in 2015-2016)

5 patents filed

22 patents disclosed (up from 17 in 2015-2016)

235 presentations up from 151 in 2015-2016 (97 international, 58 regional/national, 80 local)

585 manuscripts reviewed by 18 TECS faculty (515 by 22 in 2015-2016)

32 proposals reviewed by 7 TECS Faculty

126 research meetings attended by 23 TECS faculty (up from 83 by 15 in 2015-2016)

82 Theses and dissertations completed (up from 67 in 2015-2016)

3

56 PhD prelims completed (up from 34 in 2015-2016)

The following figure shows where our current active awards (i.e., new and old) are located based on total amount of funding and total number of projects. As you can see Industry and Trade Association funding is over half of the funding for the department.

% of Total Amount of Funding % of Number of Contracts

Figure 1: Current Active Awards

Extension initiatives and public service activities

Faculty have 49 University, 65 College, and 43 Department committee memberships of which 3 University, 6 College, and 8 Department are committee chair or co-chair

Faculty have 120 professional committee and organization memberships with 17 with leadership roles

Faculty have 27 consulting agreements

Faculty made 48 plant visits

21 faculty wrote 319 Student recommendations

11 faculty wrote 55 Faculty/Colleague recommendations

Faculty honors, awards and recognition TECS department as whole had a banner year for awards and recognition

4 Thank a Teacher awards: Jasper, Joines, Bradford and Pasquinelli

George Hodge, APICS Triangle Chapter Member of the Year, 5/1/2016

Melissa Pasquinelli, NC State College of Engineering Faculty Mentoring Award, 5/1/2016

Russell Gorga, Alumni Distinguished Undergraduate Professor, 4/1/2017

Emiel DenHartog, AATCC J. William Weaver Award, 3/30/2017

Harold Freeman, Membership in NCSU Research Leadership Academy, 4/26/2017

Harold Freeman, NCSU Alumni Association Outstanding Research Award, 4/26/2017

Harold Freeman, NCSU Holladay Medal, 5/2/2017

Jeffrey Joines, 2016-2017 NC State University Outstanding Extension Service Award, 4/25/2017

Jeffrey Joines, 2017 Alumni Association Outstanding Extension and Outreach Award, 4/26/2017

Jeffrey Joines, Academy of Outstanding Faculty Engaged in Extension, 4/25/2017

Jessee Jur, 2016-2017 NC State University Outstanding Extension Service Award, 4/25/2017

Jessee Jur, 2017 Alumni Association Outstanding Extension and Outreach Award, 4/26/2017

4

Jessee Jur, Academy of Outstanding Faculty Engaged in Extension, 4/25/2017

Jessee Jur, IEC - US Young Professional, 7/26/2016

Jessee Jur, Research Exemplar, 3/30/2017

Melissa Pasquinelli, NC State College of Engineering Faculty Peer COT Mentoring Award, 5/1/2016

Melissa Pasquinelli, Research highlighted on journal cover: http://onlinelibrary.wiley.com/doi/10.1002/marc.201670085/epdf, 10/1/2016

Melissa Pasquinelli, Seton Hill University Distinguished Alumni Award, 6/1/2016

Phillip Bradford, Research Exemplar Award, 4/20/2017

Renzo Shamey, President-Elect of Inter-Society Color Council, 1/1/2017

Roger Barker, Awarded 2017 FIERO Bruce W. Teele Excellence Award for Reseach & Service of Benefit to Firefighters,

Roger Barker, Co-Author (with Meredith McQuerry and Emiel DenHartog of paper that received (in March 2017) award for best paper published in AATCC Journal of Research,

Stephen Michielsen, Distinguished Service Award, The Fiber Society, 10/11/2016 Student honors, awards and recognition

Justin Rigon (TE), 2017 Alumni Association Mathews Medal

Ashley Page (PCC/CHE), Campus Compact Newman Civic Fellowship

Raquel Weis, NC Space Travel Grant Undergraduate Research Scholarship, under the direction of Erica Ford

Tyler Henson, ACC Meeting of the Minds, under the direction of Warren Jasper

Tyler Henson, Undergraduate Research Award, under the direction of Warren Jasper

Ciera Cipriani, NC State Undergraduate Research Grant, $2500, under the direction of Melissa Pasquinelli, Nelson Vinueza

Ciera Cipriani, NC State Undergraduate Research Grant, $750, under the direction of Melissa Pasquinelli, Nelson Vinueza

Julie Duetsch, Selected to represent NC State at the Council on Undergraduate Research REU Symposium, Arlington VA (October 24 2016), under the direction of Melissa Pasquinelli, N/A

Julie Duetsch, Travel award from REU to SAMPE 2017 to present her undergraduate research project, under the direction of Melissa Pasquinelli, N/A

Ciera Cipriani, Travel award from NC State Office of Undergraduate Research to attend NCUR, $1250, under the direction of Melissa Pasquinelli, Nelson Vinueza

Ciera Cipriani, Poster Award, NC State Spring Undergraduate Research Symposium, under the direction of Melissa Pasquinelli, Nelson Vinueza

Ciera Cipriani, Poster Award, NC State Spring Undergraduate Research Symposium, under the direction of Melissa Pasquinelli, Nelson Vinueza

Julie Duetsch, Outstanding Poster Award, NC State Summer Undergraduate Research Symposium, under the direction of Melissa Pasquinelli, N/A

Sam Ndukwe, 1st Place NC Student Academy of Science- Chemistry, under the direction of Melissa Pasquinelli, N/A

Sam Ndukwe, 3rd Place NC Science & Engineering Regional Fair, under the direction of Melissa Pasquinelli, N/A

Ciera Cipriani, OUR Summer Grant 2016, under the direction of Nelson Vinueza, Melissa Pasquinelli

Private fundraising successes

26 Senior Design Projects were funded by 17 companies for $213,000 (up from 22 projects by 15 companies for $192,000)

Administration achievements and staff changes

5

Dr. Jeffrey A. Joines became the permanent Department Head (01/03/2017).

Dr. Mellissa Pasquinelli was made Associate Department Head (Director of Graduate Programs) 08/25/2017)

Dr. Russell E. Gorga was made Associate Department Head (Director of Undergraduate Programs) 02/01/2017)

Geoffrey Scott became the TECS lab manager working closely with senior design.7/1/2016. Recommendations and concerns for the future of your unit These concerns were taken from the annual reports of the faculty except for the first one.

Concern of why Bill Oxenham and Harold Freeman’s salary was a $200k bridge loan for two years when those faculty are in the TECs department permanently. What will happen a year from now, TECS will lose $200K out of their budget hurting any chance of TAs and/or new hires? I still do not understand where their money is located and why it was not moved into the department.

Concern that traditional textile science knowledge will be lost due to faculty retirements in the immediate future. We are already in trouble if we cannot borrow some positions to search before they retire.

With three faculty going on phased retirement, they are not picking up anymore graduate students. Also, Tonelli and Michielsen (who will retire Jan or May of 2019) are no longer accepting graduate students.

Concern with high teaching loads (more TAs needed) if the college wants the TECS dept to continue to grow research funding.

Concern with recruitment and retention in PCC Program. The PCC numbers are down again this year. Hopefully with new faculty hires we can bolster the enrollment.

Concern with need for TE graduate courses due to loss of 1.5 FTE faculty and many of the TE faculty are in administration cutting their teaching down. Most of the TE faculty are not able to teach graduate level courses because of the burden of covering the undergraduate courses.

Concern of losing Kent Hester and what that might affect our recruitment and retention. This was concern that several faculty expressed in their annual reports.

Your proposed Unit’s Goals for the 2016/2017 academic year

Work on balancing the faculty workload and trying to reward those that are doing more than their share or rebalance.

Begin planning to replace expected faculty retirements with the help of the college and Provost.

Goal of changing the RPT process Recommendations on how the Dean can personally assist you and/or your unit more effectively

Continue to enhance the transparency from the college to the department.

Like to talk to the Provost about borrowing a couple of positions over the next two years to get people in place before they retire in textile science.

6

Appendix

TECS Publications and Presentations 2016-2017 Refereed Publications: 134 ( XX with 2 Authors from Dept) Watson, K., Hummel, A. and Barker, R., “Comparison of Two Methods for Evaluating the Radiant Protective Performance of Wildland Firefighter Protective Clothing”, ASTM Special Technical Publication (STP153) 10th Vol., ASTM International, West Conshochan, PA, September 2016 Ciesielska-Wrobel, I., DenHartog, E.A., Barker, R. L., “Measuring the Effects of Structural Turnout Suits on Firefighter Range of Motion and Comfort”. Ergonomics, DOI 10.1080/00140139.2016.1229044, 2016. McQuerry, M., DenHartog, E.A., Barker, R.L., “Evaluating turnout composite layering strategies for reducing thermal burden in structural firefighter protective clothing systems,” Textile Research Journal, DOI: 10.1177/0040517516651101, 2016. Nagavalli, A., Hummel, A., Akyildiz,H., Morton-Aslanis and Barker, R., “Advanced Layering Systems and Designs for Increased Thermal Protection of Wildland Fire Shelters”, ASTM Special Technical Publication(STP153) 10th Vol., ASTM International, West Conshochan, PA, September 2016 McQuerry, M., Barker, R., DenHartog, E., Hummel, A. “Testing methodologies to evaluate garment ventilation in structural firefighter turnouts for heat loss improvement.” ASTM Special Technical Publication (STP153) 10th Vol., ASTM International, West Conshochan, PA, September 2016 McQuerry, M., DenHartog, E., & Barker, R. . Evaluating turnout composite layering strategies for reducing thermal burden in structural firefighter protective clothing systems. Textile Research Journal, 87(10), 1217-1225. doi:10.1177/0040517516651101, 2017 Faraji, S., Yildiz, O., Rost, C., Stano, K., Farahbakhsh, N., Zhu, Y. and Bradford. P Radial Growth of Multi-Walled Carbon Nanotubes in Aligned Sheets through Cyclic Deposition and Graphitization, (2017) Carbon, 111:411-418. He, N., Yildiz, O., Pan, Q., Zhu, J., Zhang, X., Bradford, P. and Gao, W. Pyrolytic-carbon Coating in Carbon Nanotube Foams for Better Performance in Supercapacitors, (2017) Journal of Power Sources, 343:492-501. Wee, J., Hackney, D., Bradford, P. and Peters, K. Simulated Lamb Wave Detection Sensitivity of Surface Bonded Fiber Bragg Grating, (2017) Smart Materials and Structures, DOI:10.1088/1361-665X/aa646b. Aly, K., Li, A. and Bradford, P. Compressive Piezoresistive Behavior of Carbon Nanotube Sheets Embedded in Woven Glass Fiber Reinforced Composites (2017) Composites Part B, DOI:10.1016/j.compositesb.2016.11.002. Aly, K., Li, A. and Bradford, P. Strain Sensing and Damage Detection in Composites using Aligned Carbon Nanotube Sheets Embedded in the Interlaminar Region, (2016) Composites Part A, 90:536-548.

7

Wee, J., Wells, B., Hackney, D., Bradford, P. and Peters K. Increasing Signal Amplitude in Fiber Bragg Grating Detection of Lamb Waves using Remote Bonding, (2016) Applied Opticsied Optics, 55(21):5564-5569. Zhu, J., Yildirim, E., Aly, K., Shen, J., Chen, C., Lu, Y., Jiang, M., Kim, D., Tonelli, A., Pasquinelli, M., Bradford, P. and Zhang X. Hierarchical Multi-Component Nanofiber Separators for Lithium Polysulfide Capture in Lithium-Sulfur Batteries: An Experimental and Molecular Modeling Study, (2016) Journal of Materials Chemistry A, DOI: 10.1039/C6TA04577D. Ciesielska-Wrobel, I., DenHartog, E.A.; Barker, R. (2017) The influence of designs of protective uniforms on firefighters’ performance during moderate physical exercises. Accepted by Textile Research Journal, May, 2017. DenHartog, E.A., Rubenstein, C.D., Deaton, A.S., Bogerd N., DeKant S.: Fluid Loss Advice during Work in NFPA Level A Impermeable Chemical Protective Suits. Accepted for Publication: Journal of Occupational and Environmental Hygiene, January 2017. DOI:10.1080/15459624.2017.1296230 McQuerry, M.C., DenHartog, E.A., Barker, R.L., Hummel, A.C. (2016) Alternative Methodologies for Determining the Impact of Clothing Ventilation in Structural Firefighter Turnout Suits. Performance of Protective Clothing and Equipment, 10th Vol: Risk Reduction through Research and Testing, 313-330; DOI: 10.1520/STP159320160003 2016, Edited by: Shiels B; Lehtonen K DenHartog, E.A., Rubenstein, C.D., Deaton, A.S., Bogerd, C.P., Variability in Heat Strain in Fully Encapsulated Impermeable Suits in Different Climates and at Different Work Loads. Annals for Work Exposure and Health, 61(2), 248-259, Mar. 2017. Ciesielska-Wrobel, I., DenHartog, E.A.; Barker, R. (2016) Measuring the Effects of Structural Turnout Suits on Firefighter Range of Motion and Comfort. Ergonomics, DOI 10.1080/00140139.2016.1229044 Hany Helmy, Peter Hauser and Ahmed El-Shafei, Influence of atmospheric plasma-induced graft polymerization of DADMAC into cotton on dyeing with acid dyes, The Journal of Textile Institute, DOI: 10.1080/00405000.2017.1298206 DD Babu, R Su, P Naik, A El-Shafei, AV Adhikari, Synthesis and photovoltaic performance of a novel asymmetric dual-channel co-sensitizer for dye-sensitized solar cell beyond 10% efficiency, Dyes and Pigments 141, 112-120 Hammad Cheema, Robert Younts, Bhoj Gautam, Kenan Gundogdu, Ahmed El-Shafei, Design and synthesis of BODIPY sensitizers with long alkyl chains tethered to N-Carbazole and their application for dye sensitized solar cells, Materials Chemistry and Physics, doi.org/10.1016/j.matchemphys.2016.09.024 Dickson D. Babu, Dalia Elsherbiny, Hammad Cheema, Ahmed El-Shafei, Airody Vasudeva Adhikari, Highly efficient panchromatic dye-sensitized solar cells: Synergistic interaction of ruthenium sensitizer with novel co-sensitizers carrying different acceptor units, Dyes and Pigments, 2016, doi:10.1016/j.dyepig.2016.05.016 Chunhong Lu, Charles Blackwell, Qingyuan Ren, Ericka Ford, Effect of Coagulation Bath on the Structure and Mechanical Properties of Gel-spun Lignin/Poly(vinyl alcohol) Fibers

8

Kuenemann, Melaine A.; Szymczyk, Malgorzata; Chen, Yufei; Sultana, Nadia; Hinks, David; Freeman, Harold S.; Williams, Antony J.; Fourches, Denis; Vinueza, Nelson R., Weaver's historic accessible collection of synthetic dyes: a cheminformatics analysis, Chemical Science (2017), DOI: 10.1039/x0xx00000x. Rossi, T.; Silva, P. M. S.; De Moura, L. F.; Araujo, M. C.; Brito, J. O.; Freeman, H. S., Journal of Cleaner Production, Waste from eucalyptus wood steaming as a natural dye source for textile fibers (2017), 143, 303-310. Wang, Guan; Umbuzeiro, Gisela de Aragao; Vendemiatti, Josiane Aparecida; de Oliveira, Adria Caloto; Vacchi, Francine Inforcato; Hussain, Maqbool; Hauser, Peter J.; Freeman, Harold S.; Hinks, David, Synthesis, Characterization, and Toxicological Properties of New Cationic Bleach Activators, Journal of Surfactants and Detergents (2017), 20(1), 277-285. V. Babaahmadi, M. Montazer*, W. Gao*, Low Temperature Welding of Graphene on PET with Silver Nanoparticles Producing Higher Durable Electro-conductive Fabric, Carbon, accepted, 2017 Y. Lu, Y. Lin, Z. Chen, Q. Hu, Y. Liu, S. Yu, W. Gao*, M. Dickey*, Z. Gu*, Enhanced Endosomal Escape by Light-Fueled Liquid-Metal Transforer, Nano Letters, Accepted, 2017 N. He, O. Yildiz, Q. Pan, J. Zhu, X, Zhang, P. D. Bradford*, W. Gao*, Pyrolytic-carbon Coating in Carbon Nanotube Foams for Better Performance in Supercapacitors. J. Power Sources, 2017, 343, 492-501 N. He, S. Yoo, J. Meng, O. Yildiz, P. D. Bradford, S. Park*, W. Gao*, Engineering Biorefinery Residues From Loblolly Pines for Supercapacitor Applications, accepted, J. Power Sources. Q. Pan, E. Shim, B. Pourdehimi*, W. Gao*, Nylon-Graphene Composite Nonwovens as Monolithic Conductive or Capacitive Fabrics, ACS Appl. Mater. & Inter., 2017, 9, 8308-8316 Q. Pan, C. Chung, N. He, J. L. Jones*, W. Gao*, Accelerated Thermal Decomposition of Graphene Oxide Films in Air via in-situ X-Ray Diffraction Analysis. J. Phys. Chem. C, 2016, 120, 14981-14990. W. Gao, D. Havas, S. Gupta, Q. Pan, N. He, H. Zhang, G. Wu*, Is Reduced Graphene Oxide Favorable for Nonprecious Metal Oxygen Reduction Catalysis? Carbon, 2016, 102, 346-356. A.P. del Pino, E. György, C. Logofatu, J. Puigmartí-Luis*, W. Gao, Laser-induced chemical transformation of graphene oxide–iron oxide nanoparticles composites deposited on polymer substrates, Carbon 2015, 93, 373-383. T. Agcayazi, M. McKnight, H. Kausche, T. Ghosh, A. Bozkurt. "A Finger Touch Force Detection Method for Textile Based Capacitive Tactile Sensor Arrays" in the Proceedings of IEEE Sensors 2016, 2016, pp. 391-393. A. Kapoor, M. McKnight, K. Chatterjee, T. Agcayazi, H. Kausche, T. Ghosh, A. Bozkurt. "Soft, flexible 3D printed fibers for capacitive tactile sensing" in the Proceedings of IEEE Sensors 2016, 2016, pp. 1535-1537. M. McKnight, T. Agcayazi, H. Kausche, T. Ghosh, A. Bozkurt. "Sensing textile seam-line for searable multimodal physiological monitoring" in the Proceedings of the 38th Annual

9

International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC), 2016, pp. 311-314. McKnight, M., Agcayazi, T., Kausche, H., Ghosh, T., Bozkurt, A., Sensing Textile Seam-line for Wearable Multimodal Physiological Monitoring, Proceedings of the 38th Annual International Conference of the IEEE Engineering in Medicine and Biology Society, 2016. Hasan Sadeghifar, Richard Venditti*, Jesse Jur, Russell Gorga, Joel Pawlak, "CelluloseLignin Biodegradable and Flexible UV Protection Film" ACS Sustainable Chemistry and Engineering 5 (1) pp 625–631 (2017). (Impact Factor = 5.27) (DOI: 10.1021/acssuschemeng.6b02003) Ju Dong, Gabriel Firestone, Jason R. Bochinski, Laura I. Clarke*, and Russell E. Gorga*, “In-situ curing of liquid epoxy via gold-nanoparticle mediated photothermal heating” Nanotechnology 28 (6) 065601 (2017). Vidya Viswanath, Somsubhra Maity, J. R. Bochinski, L. I. Clarke*, and R. E. Gorga*, “Enhanced crystallinity of polymer nanofibers without loss of nanofibrous morphology via heterogeneous photothermal annealing”, Macromolecules 49 (24) 9484–9492 (2016). (Impact Factor = 5.8) Rezaei, F., M.D. Dickey, M. Bourham, P.J. Hauser, “Surface modification of PET film via a large area atmospheric pressure plasma: An optical analysis of the plasma and surface characterization of the polymer film”, Surface & Coatings Technology, November 2016. DOI: 10.1016/j.surfcoat.2016.11.072 Dincmen, G. N. Gursoy, and P.J. Hauser,”Plasma Induced Graft Polymerization of Three Hydrophilic Monomers on Nylon 6,6 Fabrics for Enhancing Antistatic Property”, Plasma Chemistry and Plasma Processing, 36, 1377-1391, 2016. Dincmen, G. N. Gursoy, and P.J. Hauser, “Plasma induced graft polymerization of a fluorocarbon monomer on polyamide 6,6 fabrics”,Tekstil ve Konfeksiyon, 27(1), 38-45, 2017 El-Shafei, A., H. Helmy, and P.J. Hauser, “Influence of Atmospheric Plasma-induced Graft Polymerization of DADMAC into Cotton on Dyeing with Acid Dyes”, accepted for publication February 16, 2017 by The Journal of the Textile Institute. DOI: 10.1080/00405000.2017.1298206. Published online March 10. 2017. Abdelgawad, A. M.; El-Naggar, M. E.; Hudson, S. M.; Rojas, O. J., Fabrication and characterization of bactericidal thiol-chitosan and chitosan iodoacetamide nanofibres. International Journal of Biological Macromolecules 2017, 94, 96-105. S, Fu, M. Farrell, P. Hauser, D. Hinks, W. Jasper, M. Ankeny, "Real-time dyebath monitoring of reactive dyeing on cationized cotton for levelness control: part 1 - influence of dye structure, temperature and addiotn of soda ash", Cellulose (2016) S, Fu, M. Farrell, P. Hauser, D. Hinks, W. Jasper, M. Ankeny, "Real-time dyebath monitoring of reactive dyeing on cationized cotton for levelness control: part 2 - effects of leveling agents and dye dosing, Cellulose (2017) G. Wu, Z. Miao, W. Jasper, A. Kuznetsov, "Modeling of submicron particle filtration in an electret monolith filter with rectangular cross section microchannels", Aerosol Science and Technology (2016)

10

Uluskan, Meryem*; Godfrey, A. Blanton; and Jeffrey Joines, (2016), Impact of competitive strategy and cost-focus on global supplier switching (reshore and relocation) decisions" Accepted by Journal of Textile Institute. Uluskan, Meryem*, Jeffrey A. Joines, and Godfrey, A. Blanton, (2016), “Integration of Six Sigma to Traditional Quality Management Theory: An Empirical Study on Organizational Performance.” Total Quality Management & Business Excellence, DOI:10.1080/14783363.2016.1150173. D. Chapman and J.A. Joines*, (2016) “Why Should I Fill this Out? Strategies for Increasing Response Rates for Online End-of -course Evaluations,” International Journal of Teaching and Learning in Higher Education, Vol 29. Nasim Farahbakhsh, Peiman Shahbeigi-Roodposhti, Hasan Sadeghifar, Richard Venditti, Jesse S. Jur "Effect of isolation method on reinforcing capability of recycled cotton nanomaterials in thermoplastic polymers" JOURNAL OF MATERIALS SCIENCE 52 (9) 4997-5013 Hasan Sadeghifar, Richard Venditti, Jesse S. Jur, Russell E. Gorga, Joel Pawlak "Cellulose-Lignin Biodegradable and Flexible UV Protection Film" ACS SUSTAINABLE CHEMISTRY & ENGINEERING 5(1) 625-631 Murat A. Yokus, Rachel F. Foote, Jesse S. Jur, “Printed Stretchable Interconnects for Smart Garments: Design, Fabrication and Characterization” IEEE Sensors 16 (22) 7967-7976 (2016). Krishnamraju Ankireddy, Akanksha K. Menon, Brian C. Iezzi, Shannon K. Yee, Mark D. Losego, and Jesse S. Jur “Evaluating Electrical Conductivity, Thermal Behavior, and Seebeck Coefficients of Conductive Films for Printed Thermoelectric Energy Harvesting Systems" JOURNAL OF ELECTRONIC MATERIALS (45) 11 5561-5569 Rebecca Hite, Jesse S. Jur, and Gail Jones “Engineering Imagination with Ideation” Journal of Interdisciplinary Teacher Leadership 1 (1) 2016 Kelly Stano, Shaghayegh Faraji, Ozkan Yildiz, Halil Akyildiz, Philip Bradford, Jesse S. Jur "Strong and Resilient Alumina Nanotube and CNT/Alumina Hybrid Foams with Tuneable Elastic Properties" RSC ADVANCES (accepted, 2017) Amanda Myers, Ryan Hodges, Jesse S. Jur "Human and Environmental Analysis of Wearable Thermal Energy Harvesting" ENERGY CONVERSION AND MANAGEMENT (accepted, 2017) Nina M. Lamba, Diane S. Herson, Rahim Jindani, Martin W. King, "Evaluation of antimicrobial-treated fabric properties", AATCC Journal of Research, 2017, Vol.4, pp.14-21, DOI: 10.14504/ajr.4.1.2 Yongfang Qian, Zhen Zhang, Laijiu Zheng, Martin W. King, Lihua Lv, Fang Ye. Incorporation of Rutin in electrospun Pullulan/PVA nanofibers for Novel UV Resist Properties. Materials, 2016, 9, x; doi:10.3390/ Yu Xie, Ying Guan, Soo-Hyun Kim, Martin W. King. The Mechanical Performance of Weft-knitted/Electrospun Bilayer Small Diameter Vascular Prostheses. Journal of the Mechanical Behavior of Biomedical Materials. August 2016.61:410-418.doi.org/10.1016/j.jmbbm.2016.04.011.

11

Ying Guan, Lu Wang*, Jing Lin, Martin W King. Compliance study of endovascular stent grafts incorporated with polyester and polyurethane grafts in both stented and unstented zones. Materials, 2016. 9(8) 658. doi : 10.3390/ ma9080658. Marinov G, Guidoin R, Wang L, King MW. “Biocompatibility, biodurability and biofunctionality of endovascular prostheses used to treat aortic aneurysms – general principles and practical approaches” Journal Folia Medica (2016) 52: Suppl.2, p.15. Chen J, West AJ, Cheng K and King MW (2016). A biodegradable knitted cardiac patch for myocardium regeneration using cardiosphere-derived cells (CDCs). Frontier Bioeng. Biotechnol. Conference Abstract: doi: 10.3389/conf.FBIOE.2016.01.02002. Cong H, Xie Y, Chapin K, Learn G, Akkus O and King MW (2016). Characterization of aligned collagen yarns for biomedical textile fabrication. Frontier Bioeng. Biotechnol. Conference Abstract: doi: 10.3389/conf.FBIOE.2016.01.02502. Fu Y, Wang L and King MW (2016). Research on fabrication and water absorption properties of a novel textile based debridement material. Frontier Bioeng. Biotechnol. Conference Abstract: doi: 10.3389/conf.FBIOE.2016.01.01007 Gajjar CR, Pasquinelli MA and King MW (2016). Combined experimental and computational study of process-property relationships for bioabsorbable polymers. Frontier Bioeng. Biotechnol. Conference Abstract: doi: 10.3389/conf.FBIOE.2016.01.02680. Gajjar CR, Ramesh H and King MW (2016). MALDI-TOF technique to study process-induced degradation of bioabsorbable polymers. Frontier Bioeng. Biotechnol. Conference Abstract. doi: 10.3389/conf.FBIOE.2016.01.02700 He T, Tang X, Chen J, Green D, Ju Y, Lee S and King MW (2016). Resorbable muscle-tendon junction scaffold with tunable porosity and mechanical properties. Frontier Bioeng. Biotechnol. Conference Abstract. doi: 10.3389/conf.FBIOE.2016.01.00551 Jindani R, Lamba N, Herson D and King MW (2016). Assessment of quaternary ammonium compound dendrimer surface treatment on textile materials. Frontier Bioeng. Biotechnol. Conference Abstract: 10.3389/conf.FBIOE.2016.01.00813 Qian Y and King MW (2016). Green electrospinning of gelatin and pullulan nanofibers to mimic the extracellular matrix. Frontier Bioeng. Biotechnol. Conference Abstract: doi: 10.3389/conf.FBIOE.2016.01.02663 Ramakrishna H, He T, Li T, King MW and Spagnoli A (2016). Culturing and detection of gene expression of transforming growth factor beta type II receptor expressing progenitor cells on textile scaffolds fabricated from resorbable PLLA. Frontier Bioeng. Biotechnol. Conference Abstract: doi: 10.3389/conf.FBIOE.2016.01.02642 Tang X, He T and King MW (2016). Degradation study of polylactic acid textile structure under commercial fabrication conditions. Frontier Bioeng. Biotechnol. Conference Abstract: X, He T and King MW (2016). Degradation study of polylactic acid textile structure under commercial fabrication conditions. Frontier Bioeng. Biotechnol. Conference Abstract: doi: 10.3389/conf.FBIOE.2016.01.00497 Yao T, Tse LW, Tan K, Marks SL, Robertson I, Mathews KG, Rust JP, Soulez G, Crawford SA and King MW (2016). Accelerated fatigue study of in situ fenestrated endovascular stent grafts

12

deployed inside the 3D phantom of a patient's aortic arch aneurysm. Frontier Bioeng. Biotechnol. Conference Abstract: doi: 10.3389/conf.FBIOE.2016.01.01217 R. Boy G. Narayanana, Ching-Chang Chung, Richard Kotek “Novel cellulose-collagen blend biofibers prepared from an amine/salt solvent system”, International Journal of Biological Macromolecules, 92, 1197–1204 (2016). J. H. Yoon, H. Avci, M. Najafi, L. Nasri, S. M. Hudson, R. Kotek, “Development of high-tenacity, high-modulus poly(ethylene terephthalate) filaments via a next generation wet-melt-spinning process”, Polymer Engineering & Science, (2016), DOI 10.1002/pen.24406 E. F. Douglass, H. Avci, R. Boy, O. J. Rojas, R. Kotek, “A review of cellulose and cellulose blends for preparation of bio-derived and conventional membranes, nanostructured thin films and composites “, Accepted for publication in Polymer Reviews on December 1, 2016. Posted online: Dec 16, 2016 at http://dx.doi.org/10.1080/15583724.2016.1269124. R. Boy, R. Kotek, “Properties of cellulose–soy protein blend biofibers regenerated from an amine/salt solvent system”, Cellulose 23, (2016). DOI:10.1007/s10570-016-1072-1 S. Salimian, Ali Zadhoush, M. Naeimirad, R. Kotek, S. Ramakrishna, “A review on Aerogel: 3D Nanoporous Structured Fillers in Polymer-based Nanocomposites”, submitted to Polymer Composites (2016). Li, Guohui; Nandgaonkar, Avinav G.; Wang, Qingqing; Zhang, Jinning; Krause, Wendy E.; Wei, Qufu; Lucia, Lucian A.; “Laccase-immobilized bacterial cellulose/TiO2 functionalized composite membranes: Evaluation for photo- and bio-catalytic dye degradation,” Journal of Membrane Science 2017, 525 (Mar 1), 89-98. Li, Guohui; Nandgaonkar, Avinav G.; Habibi, Youssef; Krause, Wendy E.; Wei, Qufu; Lucia, Lucian A.; “An environmentally benign approach to achieving vectorial alignment and high microporosity in bacterial cellulose/chitosan scaffolds),” RSC Advances 2017 7(23), 13678-13688.

Li, Guohui; Nandgaonkar, Avinav G.; Lu, Keyu; Krause, Wendy E.; Lucia, Lucian A.; Wei, Qufu; “Laccase immobilized on PAN/O-MMT composite nanofibers support for substrate bioremediation: a de novo adsorption and biocatalytic synergy” RSC Advances 2016 6(47), 41420-41427. Chang JYM, Michielsen S, "Effect of fabric mounting method and backing material on bloodstain patterns of drip stains on textiles" Internation Journal of Legal Medicine 130(3): 649-659, May, 2016 Williams EMP, Dodds M, Taylor MC, Li J, Michielsen S. "Impact dynamics of porcine drip bloodstains on fabrics" Forensic Science International 262: 67-72, May, 2016 Li X, Li J, Michielsen S. "Alternative method for determining the original drop volume of bloodstains on knit fabrics" Forensic Science International 263: 194-203, June, 2016 Lim J, Powell N, Lee H, Michielsen S. "Integration of yarn compression in modeling structural geometry of liquid resistant-repellent fabric surfaces and its impact on liquid behavior" Journal of Matrials Science 51(15): 7199-7210, Aug 2016

13

Kim JR, Michielsen S. "Synthesis of Antifungal Agents from Xanthene and Thiazine dyes and Analysis of Their Effects" Nanomaterials 6(12): Article Number UNSP 243, Dec. 2016. E Yildirim, D Dakshinamoorthy, MJ Peretic, MA Pasquinelli,* and RT Mathers,* “Strategies to Quantify Hydrophobicity in Polyester Electrolytes,” Macromolecules 49 (20): 7868–7876 + Supplementary Information (38 pages) (2016). DOI: 10.1021/acs.macromol.6b01452 SS Tallury, MA Pasquinelli, B Pourdeyhimi, and RJ Spontak,* “Physical Microfabrication of Shape-Memory Polymer Systems via Bicomponent Fiber Spinning,” Macromolecular Rapid Communications, 37: 1837–1843 (2016). DOI: 10.1002/marc.201600235. HIGHLIGHTED ON THE JOURNAL COVER: http://onlinelibrary.wiley.com/doi/10.1002/marc.201670085/epdf J Zhu, E Yildirim, K Aly, J Shen, C Chen, Y Lu, M Jiang, D Kim, AE Tonelli, MA Pasquinelli, PD Bradford, and X Zhang,* “Hierarchical multi-component nanofiber separators for lithium polysulfide capture in lithium-sulfur batteries: An experimental and molecular modeling study,” Journal of Materials Chemistry A 4: 13572-13581 (2016). DOI: 10.1039/C6TA04577D. BJ Hanson, J Hofmann, and MA Pasquinelli,* “The Influence of Copolyester Composition on Adhesion to Soda-Lime Glass via Molecular Dynamics Simulations,” Applied Materials and Interfaces 8 (21), pp 13583–13589 (2016). DOI: 10.1021/acsami.6b01851 C. Staszel, B. Pourdeyhimi, and A. Yarin, “Sintering of Compound Nonwovens by Forced Convection of Hot Air Journal: International Journal of Heat and Mass Transfer.”, International Journal of Heat and Mass Transfer, In Press. S. Tuin, B. Pourdeyhimi, and E. G. Loboa, “Fabrication of Novel High Surface Area Mushroom Gilled Fibers and Their Effects on Human Adipose Derived Stem Cells Under Pulsatile Fluid Flow for Tissue Engineering Applications.”, Acta Biomaterialia, 36, 220-230, (2016). M.A. Hassan, N. Anantharamaiah B. Pourdeyhimi, and S.A. Khan “CFD Simulations and Experiments of Meltblown Fibers: Design Concepts to Facilitate Fiber Attenuation and Enhance Filtration” Ind. Eng. Chem. Res., 2016, DOI: 10.1021/acs.iecr.5b04020 S. Tuin, B. Pourdeyhimi, and E. G. Loboa, “Creating tissues from textiles: Scalable nonwoven manufacturing techniques for fabrication of tissue engineering scaffolds", Biomedical Materials, 11(1), (2016). A. Ghosal, S. Sinha-ray, A. Yarn, and B. Pourdeyhimi, “Numerical prediction of the effect of uptake velocity on three- dimensional structure, porosity and permeability of meltblown nonwoven laydown”, Polymer, 85, 19-27, (2016) M. A. Hassan, S. A. Khan, B. Pourdeyhimi,” Fabrication of Micro-Meltblown Filtration Media Using Parallel Plate Die Design”, J. Appl. Polym. Sci., 2016 133 (7), DOI: 10.1002/app.42998 M. A. Hassan, N. Anantharamaiah, S. A. Khan, B. Pourdeyhimi, “Examination Of Secondary Air Jets On The Meltblowing Die Air Flow Field Using CFD Simulation”, AlChE J., submitted Jan. 2016 A. Kolbasov, S. Sinha-Ray, A. Joijode, M. A. Hassan, D. Brown, B. Maze, B. Pourdeyhimi, A. L. Yarin, "Industrial-Scale Solution Blowing of Soy Protein Nanofibers", Ind. Eng. Chem. Res. 2016 55 (1), pp 323–333

14

C. Staszel, S. Sinha-Ray, B. Pourdeyhimi, and A. Yarin, “Adhesion of Polymer Blended Films.”, Polymr 112, 92-101, 2017. H. Amid, B. Maze, M. C. Flickinger and B. Pourdeyhimi, “Dynamic Adsorption Of Ammonia: Apparatus, Testing Conditions, And Adsorption Capacities”, Measurement Science and Technology, 28, (2017). A. Kolbasaov, S. Sinha-Ray, A. L. Yarin, and B. Pourdeyhimi, “Heavy Metal Adsorption on Solution-blown Biopolymer Nanofiber Membranes”, Journal of Membrane Science, 530, 250-263, (2017). Q. Pan, E. Shim, B Pourdeyhimi, W. Gao*, Nylon-Graphene Composite Nonwovens as Monolithic Conductive or Capacitive Fabrics, ACS Applied Materials & Interface, 9 (9), 8308-3816 (2017). E. Shim*, B. Pourdeyhimi, and D. Shiffler Process–structure–property relationship of melt spun poly(lactic acid) fibers produced in the spunbond process, Journal of Applied Polymer Science, DOI: 10.1002/app.44225 (2016) A. Kilic* , E. Shim and B. Pourdeyhimi, Effect of annealing on charging properties of electret fibers, The Journal of The Textile Institute, 108(6), 987-881 (2017) An Unexpected Stereochemical Bias in the RAFT Syntheses of Styrene/p-Bromostyrene Polymers Uncovered by the Kerr-Effect, R. Gurarslan, A. E. Tonelli, POLYMER Volume: 89 Pages: 50-54, 2016. Correlation of the stoichiometries of poly-(epsilon-caprolactone) and alpha-cyclodextrin pseudorotaxanes with their solution rheology and the molecular orientation, crystallite size, and thermomechanical properties of their nanofibers, Narayanan, Ganesh; Chung, Ching-Chang; Aguda, Remil; et al., Tonelli, A. E., RSC ADVANCES, RSC ADVANCES Volume: 6 Pages:111326-36, 2016. Hierarchical multi-component nanofiber separators for lithium polysulfide capture in lithium-sulfur batteries: an experimental and molecular modeling study , Zhu, Jiadeng; Yildirim, Erol; Aly, Karim; et al., Tonelli, A. E., J. Materials Chemistry, Volume 4, Pages 13572-81, Published: 2016. Fabrication and Characterization of Poly(epsilon-caprolactone)/alpha-Cyclodextrin Pseudorotaxane Nanofibers,Narayanan, Ganesh; Aguda, Remil; Hartman, Matthew; et al., Tonelli, A. E., BIOMACROMOLECULES, Volume: 17, Pages: 271-279,2016. Do we need to know and can we determine the complete macrostructures of synthetic polymers? R. Gurarslan, A. E. Tonelli, Progress in Polymer Science, Volume: 65 Pages: 42-52, 2017 Melaine A. Kuenemann, Malgorzata Szymczyk, Yufei Chen, Nadia Sultana, David Hinks, Harold S. Freeman, Antony J. Williams, Denis Fourches and Nelson R. Vinueza. “Weaver’s Historic Accessible Collection of Synthetic Dyes: A Cheminformatics Analysis” Chem. Sci. 2017, DOI: 10.1039/C7SC00567A Kelsey S. Boes, Robert H. Narron, Yufei Chen, Sunkyu Park, Nelson R. Vinueza.” Characterization of Biofuel Refinery Byproduct via Selective Electrospray Ionization Tandem Mass Spectrometry”. Fuel 2017, 188, 190-196

15

Yongqiang Li, Chao Zou, Jianzhong Shao, Xiangwu Zhang, and Ya'nan Li,, “Preparation of SiO2/PS Superhydrophobic Fibers with Bionic Controllable Micro-Nano Structure via Centrifugal Spinning”, RSC Advances, 7, 11041-11048 (2017). Meltem Yanilmaz, Jiadeng Zhu, Yao Lu, Yeqian Ge, and Xiangwu Zhang, “High-Strength, Thermally Stable Nylon 6,6 Composite Nanofiber Separators for Lithium-Ion Batteries”, Journal of Materials Science, 52, 5232–5241 (2017). Xin Xia, Zhiyong Li, Leigang Xue, Yiping Qiu, Chuyang Zhang, and Xiangwu Zhang, “The Electrochemical Performance of SnSb/C Nanofibers with Different Morphologies and Underlying Mechanism, Journal of Materials Research, 32, 1184-1193 (2017). Nanfei He, Ozkan Yildiz, Qin Pan, Jiadeng Zhu, Xiangwu Zhang, Philip D. Bradford, and Wei Gao, “Pyrolytic-Carbon Coating in Carbon Nanotube Foams for Better Performance in Supercapacitors”, Journal of Power Sources, 343, 492–501 (2017). Lei Luo, Hui Qiao, Wenzheng Xu, Dawei Li, Jiadeng Zhu, Chen Chen, Yao Lu, Pei Zhu, Xiangwu Zhang, andQufu Wei, “Tin Nanoparticles Embedded in Ordered Mesoporous Carbon as High-Performance Anode for Sodium-Ion Batteries”, Journal of Solid State Electrochemistry, 21, 1385–1395 (2017) Yeqian Ge, Jiadeng Zhu,, Mahmut Dirican, Hao Jia, Meltem Yanilmaz, Yao Lu, Chen Chen, Yiping Qiu, and Xiangwu Zhang, “Fabrication and Electrochemical Behavior Study of Nano-Fibrous Sodium Titanate Composite”, Materials Letters, 188, 176–179 (2017). Zhen Shen, Yi Hu, Renzhong Chen, Xia He, Yanli Chen, Hanfeng Shao, Xiangwu Zhang, Keshi Wu, “Split Sn-Cu Alloys on Carbon Nanofibers by One-step Heat Treatment for Long-Lifespan Lithium-Ion Batteries”, Electrochimica Acta, 225, 350–357 (2017). Yanli Chen, Yi Hu, Zhen Shen, Renzhong Chen, Xia He, Xiangwu Zhang, Yongqiang Li, Keshi Wu, “Hollow Core-Shell Structured Silicon@Carbon Nanoparticles Embed in Carbon Nanofibers as Binder-Free Anodes For Lithium-Ion Batteries”, Journal of Power Sources, 342, 467-475 (2017). Chen Chen, Guoqing Li, Yao Lu, Jiadeng Zhu, Mengjin Jiang, Yi Hu, Linyou Cao, and Xiangwu Zhang, “Chemical Vapor Deposited MoS2/Electrospun Carbon Nanofiber Composite as Anode Material for High-Performance Sodium-Ion Batteries”, Electrochimica Acta, 222, 1751–1760 (2016). Chen Chen, Yao Lu, Yeqian Ge, Jiadeng Zhu, Han Jiang, Yongqiang Li, Yi Hu, and Xiangwu Zhang, “Synthesis of Nitrogen-Doped Electrospun Carbon Nanofibers as Anode Material for High-Performance Sodium-Ion Batteries”, Energy Technology, 4, 1440-1449 (2016). Zhen Shen, Yi Hu, Yanli Chen, Renzhong Chen, Xia He, Lei Geng, Xiangwu Zhang, Keshi Wu, “Excimer Ultraviolet-Irradiated Carbon Nanofibers as Advanced Anodes for Long Cycle Life Lithium-Ion Batteries”, Small, DOI: 10.1002/smll.201601158 (2016). Mengjin Jiang, Jiadeng Zhu, Chen Chen, Yao Lu, Esra Serife Pampal, Lei Luo, Pei Zhu, and Xiangwu Zhang, “Superior High-Voltage Aqueous Carbon/Carbon Supercapacitors Operating with In-Situ Electrodeposited Polyvinyl Alcohol Borate Gel Polymer Electrolytes”, Journal of Materials Chemistry A, 4, 16588-16596 (2016).

16

Jiadeng Zhu, Erol Yildirim, Karim Aly, Jialong Shen, Chen Chen, Yao Lu, Mengjin Jiang, David Kim, Alan E. Tonelli, Melissa A. Pasquinelli, Philip D. Bradford, and Xiangwu Zhang, “Hierarchical Multi-Component Nanofiber Separators for Lithium Polysulfide Capture in Lithium-Sulfur Batteries: An Experimental and Molecular Modeling Study”, Journal of Materials Chemistry A, 4, 13572-13581 (2016). Yanli Chen, Yi Hu, Zhen Shen, Renzhong Chen, Xia He, Xiangwu Zhang, Yan Zhang, Keshi Wu, Sandwich Structure of Graphene-Protected Silicon/Carbon Nanofibers for Lithium-Ion Battery Anodes, Electrochimica Acta, 210, 53–60 (2016). Mahmut Dirican, and Xiangwu Zhang, “Centrifugally-Spun Carbon Microfibers and Porous Carbon Microfibers as Anode Materials for Sodium-Ion Batteries”, Journal of Power Sources, 327, 333-339 (2016). Renzhong Chen, Yi Hu, Zhen Shen, Yanli Chen, Xia He, Xiangwu Zhang, and Yan Zhang, “Controlled Synthesis of Carbon Nanofibers Anchored with ZnxCo3−xO4 Nanocubes as Binder-Free Anode Materials for Lithium-Ion Batteries”, ACS Applied Materials & Interfaces, 8, 2591−2599 (2016). Pankaj K Alaboina, Yeqian Ge, Md-Jamal Uddin, Yang Liu, Dongsuek Lee, Seiung Park, Xiangwu Zhang, and Sung-Jin Cho, “Nanoscale Porous Lithium Titanate Anode for Superior High Temperature Performance”, ACS Applied Materials & Interfaces, 8, 12127−12133 (2016). Lei Luo, Wenzheng Xu, Zhaokang Xia, Yaqian Fei, Jiadeng Zhu, Chen Chen, Yao Lu, Qufu Wei, Hui Qiao, Xiangwu Zhang, “Electrospun ZnO–SnO2 Composite Nanofibers with Enhanced Electrochemical Performance as Lithium-Ion Anodes”, Ceramics International, 42, 10826–10832 (2016) Xuewei Yang, Wenqiao Yuan, Dawei Li, and Xiangwu Zhang, Study on an Improved Bio-Electrode Made With Glucose Oxidase Immobilized Mesoporous Carbon in Biofuel Cells, RSC Advances, 6, 24451-24457 (2016). Sarah L. Stanley, Frank Scholle, Jiadeng Zhu, Yao Lu, Xiangwu Zhang, Xingci Situ, and Reza A. Ghiladi, “Photosensitizer-Embedded Polyacrylonitrile Nanofibers as Antimicrobial Non-Woven Textile”, Nanomaterials, 6, 77 (2016).

Non Refereed Publications: 10 DenHartog, E.A., Cannon, F., Barker, R.L., (2016) Development and Validation of Bench-Level and Manikin Test Methods To Predict Heat and Moisture Related Comfort Properties of Mattresses. Final report to Tempur-Sealy. Thompson, D.B., Barker, R.L., DenHartog, E.A., 2016 Integrating Standards into Courses on High Performance Garment Systems and Human Protection and Comfort at North Carolina State University. Standards Engineering The Journal of SES – The Society for Standards Professionals. Volume 68, No. 1 January/February 2016. Jesse S. Jur and Russell E. Gorga "Product Innovation Meets Student Education" Textile World July/August 2016 Amanda Myers, Allison Bowles, Hasan Shahariar, Raj Bhakta and Jesse S. Jur "Wearable Electronics" Textile World March/April 2017

17

Haripriya Ramesh, SEM image of her experimental nanofiber scaffold featured on the front cover of the Society for Biomaterials Forum Magazine, Vol.38, Issue #4, 2016. Xiaoqi (Suki) Tang, SEM image of fibroblast cells growing on her PLA multifilament yarn featured on the front cover of the Society for Biomaterials Forum Magazine, Vol.39, Issue #1, 2017. Greg Tourino, Alexander Carroll, Martin W. King, "When the textbook you need hasn't been written yet", On-line NC State Library Stories <https://www.lib.ncsu.edu/stories/when-the-textbook-you-need-hasn%E80%99t-been-written-yet/>. January 19, 2017. E. Demirci, M. Acar, B. Pourdeyhimi, V. Silberschmidt, “Numerical Modeling of Mechanical Response of Fibrous Materials under Out-of-Plane Loading”, ICCM2016, August 1st-4th, Berkeley, CA, USA Tuin SA, Haslauer CM, Loboa EG (Jan 2016). Translating Textiles to Tissues: Tissue Engineering Using Industry Standard Manufacturing Approaches. Biomedical Engineering Society: Cellular and Molecular Bioengineering 2016 Annual Meeting, New Orleans, LA. Unique Hue Data, CIE TC1-76 Technical Report, Wurger, S. Shamey R, Nov 2016

Submitted for Publication: 64 McQuerry, M., Barker, R., & DenHartog, E., " Functional design of structural firefighter turnout suits for improved thermal comfort part I: design process and prototype development". Submitted for publication in Clothing and Textiles Research Journal. . McQuerry, M., Barker, R., & DenHartog, E. " Functional design of structural firefighter turnout suits for improved thermal comfort part II: thermal manikin and physiological modeling evaluation". Submitted for publication Clothing and Textiles Research Journal. McQuerry, M., DenHartog, E., & Barker, R. " Analysis of air gap volume in structural firefighter turnout constructions in relation to heat loss". Submitted for publication in Textile Research Journal McQuerry, M., DenHartog, E., & Barker, R. "Impact of reinforcements on heat stress in structural firefighter turnout suits".Submitted for publication in Journal of the Textile Institute. Bradford. P. Composites Based on Long Aligned Carbon Nanotubes (book chapter), Comprehensive Composite Materials, 3/17/2017 Li, A., Stahl, J., Bogdanovich, A. and Bradford P. Strain Sensing in Composite Joints using Carbon Nanotube Sheets. Submitted to Composites Science and Technology, 3/8/2017 Yildiz, O., Dirican, M., Fang, X., Fu, K., Stano, K., Zhang, X. and Bradford, P. Hybrid CNT Fabrics with Sacrificial Nanofibers for Flexible High Performance Li-Ion Battery Anodes. Submitted to Journal of Power Sources, 3/30/2017 Stano, K., Faraji, S., Yildiz, O., Akyildiz, H., Bradford, P. and Jur, J. Strong and Resilient Alumina Nanotube and CNT/Alumina Hybrid Foams with Tuneable Elastic Properties. Submitted to RCS Advances (accepted but not published yet), 12/29/2016

18

Yingying, Yu., Zhang, L., Yildiz, O., Deng, H., Bradford, P., Zhu, Y. Investigation of the Microcombing Effects: A Promising Procedure for CNT-based Composites. Submitted to Composites Part B., 5/2/2017 Fang, X., Li, A., Yildiz, O., Shao, H., Bradford, P. and Ghosh, T. Enhanced Anisotropic Response of Dielectric Elastomer Actuators with Microcombed and Etched Carbon Nanotube Sheet Electrodes. Submitted to Carbon (accepted but not published yet). 2/1/2017 Wang, Q., Yildiz, O., Li, A., Aly, K., Qiu, Y., Jiang, Q., Chen, S., Pui, P. and Bradford, P. High Temperature Carobn Nanotube – Nanofiber Hybrid Filters. Submitted to ACS Applied Materials and Interfaces. 3/26/2017 He, N., Yoo, S., Meng, J., Yildiz, O., Bradford, P., Park, S. and Gao, W. Engineering Biorefinery Residues from Loblolly Pine for Supercapacitor Applications. Submitted to Carbon (accepted but not published yet). 12/11/2016 Naik, P.; Su, R.; Babu, D. D.; Elmorsy, M. R.; El-Shafei, A.; Adhikari, A. V., Molecular Design and Theoretical Investigation of New Metal-free Organic Sensitizers with simple D-π-A Architecture for DSSC Application. (Submitted) Naik, P.; Elmorsy, M. R.; Su, R.; Babu, D. D.; El-Shafei, A.; Adhikari, A. V., New carbazole based metal-free organic dyes with D-π-A-π-A architecture for DSSCs: synthesis, theoretical and cell performance studies. (Submitted) Naik, P.; Su, R.; Elmorsy, M. R.; El-Shafei, A.; Adhikari, A. V., Improved Photovoltaic performance of Ru-complex based DSSC device by employing a Metal-free organic dyes as co-adsorbent. (Submitted) Dalia El-Sherbiny, Erol Yildirim, Farag El-Essawy, Ahmed Abdel-Megied, and Ahmed El-Shafei, Structure-Property Relationships: Influence of Number of Anchoring Groups in Triphenylamine-Carbazole Motifs on Light Harvesting and Photovoltaic Performance for Dye-Sensitized Solar Cells, Submitted to Dyes and Pigments Arangdad, Kiarash; Detwiler, Andrew ; Cleven, Curt; Burk, Christopher; Shamey, Renzo; Pasquinelli, Melissa; Freeman, Harold; El-Shafei, Ahmed, Photodegradation of Co-Polyester Films: A Mechanistic Study, submitted to Industrial and Engineering Chemistry Jihye Lim, Nahid Mehraban, Malgorzata Szymczyk, Yi Ding, Lisa Chapman, Ahmed El-Shafei, Harold S. Freeman, Spectral and X-ray analyses of Photostable Scarlet Disperse Dyes for Digital Printing on Textile Fibers, Submitted to Dyes and Pigments Yi Ding, Nahid Meraban, Malgorzata Szymczyk, Lisa Parrillo-Chapman, Ahmed El-Shafei, Harold S. Freeman, Molecular properties of photostable dyes for digital printing: anthraquinone blue dyes for hydrophobic fibers Rui Su, Mohamed R. Elmorsy, Mira Abed, Ashraful Islam, Meghan Ford, Ahmed A. Fadda, Ahmed El-Shafei, A comparative study of two novel heteroleptic thiophene-based ancillary ligands of Ru(II) complexes for high efficiency dye-sensitized solar cells, submitted to European Journal of Inorganic Chemistry Yaewon Park, Preeti Rawat, Ericka Ford, Role of Polymerized Micelles on the Calcium Carbonate Mineralization of Nanofibers, ACS Industrial & Engineering Chemsitry Research, 3/2/2017

19

N. He, Q. Pan, Y. Liu, W. Gao*, Graphene-Fiber-Based Supercapacitors Favor N-Methyl-2-Pyrrolidone as the Spinning Solvent, in revision, ACS Appl. Mater. & Inter., 2017 Q. Pan, E. Shim, B. Pourdeyhimi, W. Gao*, Highly Conductive Polypropylene-Graphene Nonwoven Composite via Interface Engineering, in review in Langmuir, 2017 Fang, X., Li, A., Yildiz, O., Shao, H., Bradford, P. D., Ghosh, T. K., Enhanced Anisotropic Response of Dielectric Elastomer Actuators with Microcombed and Etched Carbon Nanotube Sheet Electrodes. Accepted for publication in Carbon. April, 2017. Ya-Ting Su, Russell E. Gorga*, and Melissa Pasquinelli*, “Interfacial degradation induced during the processing of core-sheath bicomponent filaments of polypropylene/polyethylene and its impact on mechanical properties” pending submission to ACS Applied Materials and Interfaces. (Impact Factor = 7.15) :"Deviation of Young's Contact Angle for nanometer size oil droplets from continuum theory", Jasper, Du and Rasipuram, Langmuir submitted 11/8/2016 S, Fu, M. Farrell, P. Hauser, D. Hinks, W. Jasper, M. Ankeny, "Real-time dyebath monitoring of reactive dyeing on cationized cotton for levelness control: part 1 - influence of dye structure, temperature and addiotn of soda ash", Cellulose (2016) S, Fu, M. Farrell, P. Hauser, D. Hinks, W. Jasper, M. Ankeny, "Real-time dyebath monitoring of reactive dyeing on cationized cotton for levelness control: part 2 - effects of leveling agents and dye dosing, Cellulose (2017) G. Wu, Z. Miao, W. Jasper, A. Kuznetsov, "Modeling of submicron particle filtration in an electret monolith filter with rectangular cross section microchannels", Aerosol Science and Technology (2016) Adikorley, R., Joines, J.A., Rothenberg, L. and Thoney-Barletta, K.A. Apparel sourcing in Sub-Saharan Africa: views from apparel sourcing executives and trade policy representatives, submitted to Clothing and Textiles Research Journal on 3/12/17 Standish, Trey, Jeffrey A. Joines and Karen Young, “Improving SET Response Rates: Reducing the Burden of Student Evaluations of Teaching Increases Response Rates and Lengthens Open Ended Question Responses, Submitted to Journal of Higher Education, July 2016 Sas, Iurri, Jeffrey A. Joines, Kristin A. Thoney, and Russell E. King, Logistics of Carpet Recycling in the US: Designing the Collection Network, Submitted to Journal of Textile Institutue. Harshini Ramakrishna, Tieshi Li, Ting He, Anna Spagnoli and Martin W. King, Multiphase Biodegradable Scaffolds for Tissue Engineering a Tendon-Bone Junction, Submitted to Tissue Engieering Part 1. February 18, 2017. Jiyang Chan, Andre J. West, Ke Cheng, Martin W. KingJiyang Chan, Andre J. West, Ke Cheng, Martin W. King. A Biodegradable Knitted Cardiac Patch For Myocardium Regeneration Using Cardiosphere-derived Cells (CDCs). Submitted to Journal of Donghua University (English Edition) March 10, 2017

20

Rahim Jindani, Diane Herson, Nina Lamba, Martin W. King. Assessment of Quaternary Ammonium Compound Dendrimer Surface Treatment on Woven Textile Materials. Journal of Industrial Textiles, May 2017 Jindani R, SM Ortiz-Pujols, C Nielsen, BA Cairns and MWKing. Donor site wound management and its efficacy. International Journal of Burns and Trauma. May 2017. Tong Yao, Kyle G. Mathews, Ian Robertson, Steven L. Marks, David S. Lalush, Martin W. King. Imaging Modalities to Visualize Polyester Fabric in Endovascular Stent Grafts. European Journal of Vascular Surgery, May 2017. Y. Yu, R. Boy, M. Najafi and R. Kotek, "Novel Composite Membranes Regenerated from Blends of Cellulose and Gluten Using Ethylenediamine/Potassium Thiocyanate Solvent System". Macromolecular Bioscience, January 12, 2017 E. F. Douglass, R. Boy, R.Kotek, "Development and characterization of porous cellulose membranes", Cellulose, May 2017 Ganesh Narayanana, Merve Yasemin Tekbudakb, Yavuz Caydamlia, Ju Dong, Wendy E. Krause,* “Accuracy of electrospun fiber diameters: The importance of sampling and person-to-person variation” Polymer Testing (accepted April 2017). Lim J, Powell N, Lee H, Michielsen S. "Geometric impact of void space in woven fabrics on oil resistance or repellency" Journal of Materials Science, November 3, 2016 Kwon C., Thoney K., Oxenham W., An Indirect Tesating Approach for Characterizing Pressure Profiles of Compression Bandages and Hosiery, Journal of The Textile Institute, April 18, 2017 K Arangdad, A Detwiler, C Cleven, C Burk, R Shamey, M Pasquinelli, H Freeman, A El-Shafei, "Photodegradation of Co-Polyester Films: A Mechanistic Study," submitted to Industrial and Engineering Chemistry R. Shamey, M. Zubair, H. Cheema, Unique Hue stimulus selection using Munsell Color Chips under different chroma levels and illuminaiton conditions, J. Opt. Soc. Ame., Oct 2016 R. Shamey, M. Zubair, R. Kuehni, Factors Affecting Unique Hue Stimuli Selections using object colors, AIC, Feb 2017 E. Yi, R. Shamey, Visual Assessment of Fashion Images, Based on Persimmon-Dyed Cotton Fabric: Galchon, by Korean and American Observers, AIC, Feb 2017 Hannah Stoughton, Eunkyoung Shim*, Bong-Yeol Yeom, and Behnam Pourdeyhimi, Surface Grafting of Glycidyl Methacrylate (GMA) onto PET Bicomponent Fiber Nonwovens Via Ceric Salts, Accepted, Journal of Industrial Textiles Hannah Stoughton, Eunkyoung Shim*, Bong-Yeol Yeom, and Behnam Pourdeyhimi, Structures and Properties of Fractured Segmented Pie Bicomponent Nonwovens, submitted to Journal of Textile Institute Ning Sun, Eunkyoung Shim*,and Behnam Pourdeyhimi, Effects of the Needle Barb Size on Structures and Properties of Needlepunched Nonwovens, submitted to Journal of Textile Institute

21

Samaneh Mohseni, Eunkyoung Shim*, 2 Behnam Pourdeyhimi, The Effect of 1,3,5 -Benznetrisamide Nucleating Agents on Crystalline Structure and Properties of Meltspun Polypropylene Fibers, Acccepted to Polymer Engineering and Science Analytical Techniques for Characterizing Cyclodextrins and Their Inclusion Complexes with Large and Small Molecular Weight Guest Molecules, Ganesh Narayanan, Ramiz Boy, Bhupender S. Gupta, Alan E. Tonelli, Polymer Testing. Jialong Shen, Jessica L. Nichol, Alan E. Tonelli, J. Polym. Sci. Part B, Polym. Phys..Attempted Determination of the Structures of Complex Aliphatic Co-Polyesters, Shanshan Li, Influence of Urea on the Glass Transition Temperature of Poly (methyl methacrylate), Shanshan Li, Jialong Shen, Alan E. Tonelli, Polymer. The Glass Transition Temperatures of Amorphous Linear Aliphatic Polyesters,Jialong Shen, Yavuz Caydamli, Alper Gurarslan, Shanshan Li, Alan E. Tonelli, Polymer Emily L. Lichtenberger, Yufei Chen, Daniel C. Ashley, Elena Jakubikova and Nelson R. Vinueza. “Effect of Electron Donating and Withdrawing Groups on the Attachment of Chloride Anion to Catechol Derivatives“ Org. Lett. Submitted Hoyong Kim, Nelson R. Vinueza, Stephen Kelley and Sunkyu Park. “Correlation between solubility parameters and recovery of phenolic compounds from pyrolysis bio-oil by diesel extraction Bioresource Technology”. Bioresource Technology, Submitted Nadia Sultana, Sean Gunning, Stephen J. Furst, Kenneth P. Garrard, Thomas A. Dow, Nelson R. Vinueza.” Direct Analysis of Textile Dyes from Trace Fibers by an Automated Microfluidic Dye Extraction System Coupled with QTOF Mass Spectrometry for Forensics Analysis” Analyst, Submitted Kelsey S. Boes, Michael S. Roberts, Nelson R. Vinueza. “Rapid Quadrupole-Time-of-Flight Mass Spectrometry Method Quantifies Oxygen-rich Lignin Compound in Complex Mixture”. J. Am. Soc. Mass Spectrom. Submitted Renzhong Chen, Zhen Shen, Xia He, Zhongling Cheng, Peng Pan, Yanli Chen, Yi Hu, Xiangwu Zhang, and Keshi Wu, "Zinc Oxide Married Metallic Cobalt: Co-catalytic Activation to Synthesize Sponge-Like Carbon Nanofiber with Well-Interconnected Mesopores for Energy Storage", Advanced Energy Materials, 06/03/2017. Jun Zang, Jianchuan Ye, Hang Qian, Yu Lin, Xiangwu Zhang, MingSen Zheng and QuanFeng Dong, "MnO2 nanosheets grown in-situ inside and outside the hollow carbon spheres as high performance anode for Lithium Ion Battery", Journal of Materials Chemistry A, 01/07/2017. Ozkan Yildiz. Mahmut Dirican, Xiaomeng Fang, Kun Fu, Kelly Stano, Philip Bradford, and Xiangwu Zhang, "Hybrid CNT Fabrics with Sacrificial Nanofibers for Flexible High Performance Li-Ion Battery Anodes", Journal of Power Sources, 03/08/2017. Lei Luo, Dawei Li, Jun Zang, Chen Chen, Jiadeng Zhu, Hui Qiao, Yibing Cai, Qufu Wei, and Xiangwu Zhang, "Polydopamine derived nitrogen-doped carbon coated magnesium ferrite nanofibers as anode material for lithium-ion batteries with enhanced cycling performance", Energy Technology, 11/2/2016

22

Chen Chen, Guoqing Li, Jiadeng Zhu, Yao Lu, Mengjin Jiang, Yi Hu, Zhen Shen, and Xiangwu Zhang, "In-situ Formation of Tin-Antimony Sulfide in Nitrogen-Sulfur Co-doped Carbon Nanofibers as High performance Anode Materials for Sodium-Ion Batteries", Carbon, 04/02/2017. Pei Zhu, Jiadeng Zhu, Jun Zang, Chen Chen, Yao Lu, Mengjin Jiang, Chaoyi Yan, Mahmut Dirican, R. Kalai Selvan, and Xiangwu Zhang, "A novel bi-functional double-layer rGO-PVDF/PVDF composite nanofiber membrane separator with enhanced thermal stability and effective polysulfide inhibition for high-performance lithium-sulfur batteries", Journal of Materials Chemistry A, 04/17/2017.

Book Chapters Written: 12 Fiber-Based Sensors: Enabling Next Generation Ubiquitous Textile Systems, Michael McKnight, Talha Agcayazi, Tushar Ghosh, Alper Bozkurt, In Wearable Technology in Medicine and Healthcare, Raymond Tong, Ed, Elsevier (In Press) Fibers as Sensors and Actuators, Xiaomeng Feng, Kony Chatterjee, Ashish Kapoor, Tushar Ghosh, In Handbook of Fibers as Advanced Materials, Jinlian Hu, Ed, Wiley (In press) Textiles in Bilding and Construction, Jordan Tabor, Tushar Ghosh, In High Performance Technical Textiles, Roshan Paul, Ed, Wiley (In press) Jasper, W., & Rasipuram, S. Plasma textiles as fibrous filter media. In P. Brown, & C. Cox (Eds.), Fibrous filter media (1st ed.,) Elsevier (Final draft submitted). Yao T, SA Crawford, TL Forbes and MW. King, Components Used in the Construction of Endovascular Stent Grafts: Impact on Clinical Practice and In Situ Fenestration. In Current Challenges in Vascular Biomaterials, N. Chakfé, F Heim, W. Meichelboeck (Eds.), Geprovas, Strasbourg, France, 2016, pp.43-61. R. Boy, G. Narayanan R. Kotek. “Cellulose and Protein Blend Biofiber Formation”, Springer (2017). R. Kotek, M. Afshari, H. Avci, M. Najafi, "Production of Polyolefins", Woodhead Publishing , 2017. (Invited) SA Deshmukh, BJ Hanson, Q Jiang, and MA Pasquinelli,* “Perspectives on the use of molecular dynamics simulations to characterize filler-matrix adhesion and nanocomposite mechanical strength”, in Interface and Interphase in Polymer Nanocomposites (Scrivener Publishing/Wiley and Sons), Anil N. Netravali, K. L. Mittal, Editors; Chapter 14, pp. 379-412 (2017). http://dx.doi.org/10.1002/9781119185093.ch11 (Invited) MA Pasquinelli* and YG Yingling*, “Molecular dynamics simulations of nano-biomaterials” in Encyclopedia of Nanotechnology, (Springer), Bharat Bhushan, Editor; pp. 2260-2269 (2016), (Springer), Bharat Bhushan, Editor; pp. 2260-2269 (2016). From NMR Spectra to Molecular Structures and Conformation, Tonelli, Alan, Chapter in ACS Symposium Series Books: "Stereochemistry and Global Connectivity: The Legacy of Ernest Eliel" Manuscript ID: bk-2017-00048g, February, 2017. Jiadeng Zhu, Samuel Jasper, Xiangwu Zhang, “Chemical Characterization of Electrospun Nanofibers”, Chapter 8 in “Electrospun Nanofibers”, Mehdi Afshari, Ed., The Textile Institute and Woodhead Publishing, ISBN 978-0-08-100907-9, pp. 181-206, 2017.

23

Jiadeng Zhu, Yeqian Ge, Samuel Jasper, Xiangwu Zhang, “Physical Characterization of Electrospun Nanofibers”, Chapter 9 in “Electrospun Nanofibers”, Mehdi Afshari, Ed., The Textile Institute and Woodhead Publishing, ISBN 978-0-08-100907-9, pp. 207-238, 2017.

Books Edited: 1 Martin W. King, Bhupender S. Gupta, Robert Guidoin (Eds.) Biotextiles as Medical Implants, First Edition: Woodhead Publishing, November 2013. Elsevier (current publisher) requests Second edition.

Books Written: 0 Patents Issued: 1 9,414,967 B2, “Comp., Prep. & Use of Chitosan Shards for Biomed Appl.”, Hudson, S.,

Patents Filed: 5 US Patent Application No. 62/411,764. A Lighter-than-air Vehicle with a Hull, A Laminate for Such Hull and a Method of Production of Such Laminate, Li, A., Bradford P., Seyam, A and Vallabh, R. 221404-8240 62/352,176 6/20/2016 United States Comfortable, Non-chemical, Mosquito Bite-resistant Textiles and Garments Ericka Ford, Chunhong Lu, Charles Blackwell, 4/10/2017, Additive for Fiber Strengthening Engineering rates of resorption for polymeric fibers, Inventors: Martin W. King, Melissa A. Pasquinelli, Chirag R. Gajjar. TH Application No.221404-8270, August 5, 2016. Seyam A., Oxenham W., "Non-Stop Tying-In Process, Application Number 62451851, 02/18/2017

Patents Disclosed: 22 Bradford, P., Faraji, S. and Stano, K., Disclosed 3/13/2017, Anisotrpic Carbon nanotube Foams 17211 Comfortable, non-chemical, mosquito bite-resistant garments using "Superfine" knitted fabric Brian Eller Option Agreement in Effect 04/12/2017 McCord, Apperson, Roe, West, DenHartog 17156 Insect Barrier Textile Liner System Brian Eller Evaluating 02/08/2017 McCord, Apperson, Roe, West, DenHartog 16298 Comfortable, non-chemical, mosquito bite-resistant garments using novel textile design and apparel construction Brian Eller Exclusively Licensed - Limited Field 06/27/2016 McCord, Apperson, Roe, West, DenHartog Ericka Ford, Chunhong Lu, Charles Blackwell, 4/10/2017, Additive for Fiber Strengthening Disclosure No. 17095 "Wireless power transfer in a knit garment", Jasper, Henson and Zhu. 11/18/2016 Bowles, Bhakta, Jur; 11/1/2016; BIOMETRIC COMPRESSION SHIRT - FUNCTIONAL GARMENT DESIGN

24

Venditti, Sadeghifar, Jur, Pawlak; 11/2/2016; LIGNIN NANO AND MICROPARTICLES: A RAPID AND ENVIRONMENTALLY BENIGN PRODUCTION METHOD Bhakta, Shahariar, Jur; 11/7/2016; DIRECT-WRITE PRINTING OF ELECTRONICS ON TEXTILES Shahariar, Jur; 11/7/2016; PRINTED GRID ANTENNA Bhakta, Shahariar, Jur; 11/7/2016; PRINTED ELECTRICAL VIAS ON TEXTILE Bhakta, Shahariar, Jur; 11/7/2016; PRINTED HEATER ON TEXTILE #16127. Martin W. King, Tushar Bambharoliya. "Drug eluting filter covered angioplasty stent system". Disclosed: April 19, 2016. #16226. Martin W. King, Bhavya Singhi, Radhika Vaid. "Development of solvent spinning process for bacterial polyester". Disclosed: May 10, 2016. #17004. Xiaoqi Tang, Martin W. King, Ting He. "Tensile test methods for anisotropic tissues, membranes and fabrics". Disclosed: July 21, 2016. #17014. Ting He, Martin W. King. "Multiphase warp knits for complex tissue engineering scaffold applications". Disclosed: July 16th 2016. #17020. Martin W. King, Melissa A. Pasquinelli, Chirag R. Gajjar. "Engineering rates of resorption for polymeric fibers". Disclosed: July 27, 2017. #17023. Ting He, Martin W. King, Robert Dennis. "Dynamic bioreactor for tissue engineering applications". Disclosed: July 29, 2016. #17135. Martin W. King, Rahim Jindani, Ting He, Jiantao Huang. "3D knitted spacer wound dressing material for donor site wounds". Disclosure: December 13, 2016. #17XXX. Ke Cheng, Tushar Bambharoliya, Martin W. King. "Biomimetic cardiac stem cell membranes and regenerative factors coated on mesh covered stent system". Disclosure: May 2017. Wenbo Liu, Jon P. Rust, Peter J. Hauser, Stephen Michielsen, August 25, 2016 "Dynamic Moisture Management via Hydrogel Finish Eunkyoung Shim, Samaneh Mohseni, Behnam Pourdeyhimi, Nonwoven filter media with improved filtration performance, NC State University Disclosures Case #17128, 12/2/2016

International Presentations and/or Conferences: 97 Aksu, C., Bradford, P. and Jur, J. Metal Oxide Aerogel Patterning by CO2 Laser

Etching of ALD-coated Carbon Nanotube Macro-structures, (2016) American Vacuum Society 63rd International Symposium & Exhibition, Nashville TN, USA.

Stano, K., Faraji, S., Jur, J. and Bradford P. Ultralow Density Alumina Structures Produced via Atomic Layer Deposition on Carbon Nanotube Foam Templates, (2016) Proceedings of TechConnect World Innovation Conference and Expo, National Harbor MD, USA.

Wee, J., Hackney, D., Peters, P., Wells, B. and Bradford, P. Sensitivity of Contact-Free Fiber Bragg Grating Sensor to Ultrasonic Lamb Wave, (2016) Proceedings of The

25

International Society for Optics and Photonics 9803, Sensors and Smart Structures Technologies for Civil, Mechanical and Aerospace Systems, Las Vegas NV, USA.

Bradford, P. Carbon Nanotube Textiles (2017) Proceedings of Textile Summit 2017, Raleigh NC, USA

10th Textile Bioengineering and Informatics Society, Wuhan, China, May 16-18, 2017. “Dynamic Moisture Management testing.”

Materials Science Symposium: "Evaluation of New materials for human protection, performance and comfort" - Nov. 4, 2016, Raleigh, USA

Polymer-Sensors and Actuators for Textiles, Invited presentation, Fang X. , Ghosh, T. K., Textile Summit, The Hong Kong Polytechnic University, 28-30 June (2016), Hong Kong

Anisotropic Actuation of Dielectric Elastomers, Invited Presentation, EuroEAP, 6th international conference on Electromechanically Active Polymer transducers & artificial muscles, Fang, X., Subramani, K., Spontak, R. J., and Ghosh, T. K., 14-15 June (2016), Helsingor, Denmark

Melissa A. Pasquinelli, Ya-Ting Su, Syamal S. Tallury, Russell E. Gorga, and Richard J. Spontak “Tuning the Interfacial Characteristics of Fibrous Materials via Nanoscale Simulations” Nanofibers, Applications, and Related Technologies, Raleigh, NC, September 13 – 15, 2016.

R. E. Gorga “Mechanical measurements and microscopy as characterization tools for nanofibrous webs” Nanofibers, Applications, and Related Technologies, Raleigh, NC, September 13 – 15, 2016. (invited)

R. E. Gorga “Unconfined, melt electrospinning for scale-up” The Fiber Society, Spring Conference, Mulhouse, France, May 25-27, 2016.

H. Huang, D. Fontecha, G. Firestone, J. R. Bochinski, L. I. Clarke, and R. E. Gorga, “Controllable polymer degradation via photothermal heating of embedded metal nanoparticles”, Americal Physical Society, Annual Meeting, New Orleans, LA, March 13, 2017.

Joint Fund Symposium, US-Egypt, Natioanl Acad Sci., Cairo Egypt Oct 24-25,

Fiber Society, Cornell October 2016, "Adaptive Washing Strategy for Overflow Rinsing"

Thoney-Barletta, K.A., Adikorley, R., Joines, J.A., and Rothenberg, L. Apparel sourcing in Sub-Saharan Africa, Part 1: Cost competitiveness, Textile Summit, NCSU, Raleigh, NC, March 22, 2017.

Rothenberg, L., Adikorley, R., Joines, J.A., and Thoney-Barletta, K.A. Apparel sourcing in Sub-Saharan Africa, Part 2: Views from apparel sourcing executives and trade policy representatives, Textile Summit, NCSU, Raleigh, NC, March 22, 2017.

Joines, J.A., Rezaei, S., Rothenberg, L. and Thoney-Barletta, K.A. Apparel recycling consumer behavior, Textile Summit, NCSU, Raleigh, NC, March 22, 2017.

Rezaei Arangdad, S., Thoney-Barletta, K.A., Joines, J.A., Rothenberg, L. and Leonas, K.K. Apparel and shoe retailers’ and brands’ perspectives in designing products for recyclability. AATCC 2017 International Conference, Wilmington, NC, March 30, 2017.

Alexa Kearns, Richard Venditti, Jesse S. Jur, Nasim Farahbakhsh; 253rd meeting of the American Chemical Society

Raj Bhakta, Rachel Foote, Joshua Gowin, Jesse S. Jur "DIRECT-JET PRINTED FLEXIBLE INTERCONNECTS ON FILMS AND TEXTILES" innoLAE 2017

Jesse S. Jur, Amanda Myers, Raj Bhakta, Murat Yokus "Toward Wearable Textile Electronics – Materials, Integration, and Analysis Strategies of the Human Scenario" ASTM International D13 Workshop on Smart Textiles

Jesse S. Jur "Redefining Textiles for Healthcare - Textile Electronic Systems Design Strategies for Biomedical Devices" 8th Cairo International Biomedical Engineering Conference

Jesse S. Jur "Standards for Wearable Electronics" 2016 Printed Electronics IDTechEx

26

Jesse S. Jur "Wearable Standards" 2016 IFAI

Jesse S. Jur, Russell Gorga "Testing in Engineering Design" 2016 IFAI

Amanda Myers, Jesse S. Jur "Enabling Self-Powered Wearable Electronics" 2016 Sourcing @ MAGIC

Raj Bhakta, Rachel Foote, Murat Yokus, Jesse S. Jur "Enabling Textile Electronics" 2016 Sourcing @ MAGIC

Halil I. Akyildiz, John Morton-Aslanis, Alexander Hummel, Roger Barker, and Jesse S. Jur "Evaluation of Structural Changes in ALD Films with Thermal Annealing" AVS 63rd International Symposium & Exhibition

Halil I. Akyildiz, Philip Bradford, and Jesse S. Jur "Pyrolysis of Organic-Inorganic Hybrid Materials Formed by Sequential Organometallic Vapor Infiltration" AVS 63rd International Symposium & Exhibition

Cemile Aksu, Philip D. Bradford and Jesse S. Jur "Oxide Aerogel Patterning by CO2 laser etching of ALD-coated Carbon Nanotube Macro-Structures" AVS 63rd International Symposium & Exhibition

Jesse S. Jur "Wearables at Work and Play" Wearable Technology Summit @ 2017 Consumer Electronic Show

Jesse S. Jur "Fitness as a Second Skin" FitnessTech Summit @ 2017 Consumer Electronic Show

Jesse Jur, Halil Akyildiz, Richard Padbury "Organometallic Infiltration into Polymers toward the Formation of Hybrid Organic-inorganic Nanomaterials" TMS 2017 Annual Meeting & Exhibition

Rahim Jindani, Nina Lamba, Diane S. Herson, Martin W. King. Assessment of quaternary ammonium dendrimer surface treatment on textile materials. 10th World Biomaterials Congress, Montreal, Canada, May 17-22, 2016.

Jiyang Chen, Andre J West, Ke Cheng, Martin W. King. A biodegradable knitted cardiac patch for myocardium regeneration using cardiosphere-derived cells. 10th World Biomaterials Congress, Montreal, Canada, May 17-22, 2016.

Hui Cong, Yu Xie, Katherine Chapin, Greg Learn, Ozan Akkus, Martin W. King. Characterization of aligned collagen yarns for biomedical textile fabrication. 10th World Biomaterials Congress, Montreal, Canada, May 17-22, 2016.

Yijun Fu, Lu Wang, Martin W. King. Fabrication and water absorption properties of a novel textile based debridement material. 10th World Biomaterials Congress, Montreal, Canada, May 17-22, 2016.

Ying Guan, Jing Lin, Guoping Guan, Lu Wang, Martin W. King. Compliance study of both stented and unstented zones of endovascular stent-grafts incorporated with polyester and polyurethane graft materials. 10th World Biomaterials Congress, Montreal, Canada, May 17-22, 2016.

Chirag Gajjar, Melissa Pasquinelli, Martin W. King. Combined experimental and computational study of process property relationships for bioabsorbable polymers. 10th World Biomaterials Congress, Montreal, Canada, May 17-22, 2016.

Tong Yao, Leonard W. Tse, Steven L. Marks, Ian Robertson, Kyle G. Mathews, Sean A. Crawford, Martin W. King. Accelerated fatigue study of in situ fenestrated endovascular stent-grafts deployed inside a 3D phantom of a patient's aortic arch aneurysm. 10th World Biomaterials Congress, Montreal, Canada, May 17-22, 2016.

Ting He, Xiaoqi Tang, Jiyang Chen, Denethia Green, Young Min Ju, Sang Jin Lee, Martin W. King. Resorbable muscle-tendon junction scaffold with tunable porosity and mechanical properties. 10th World Biomaterials Congress, Montreal, Canada, May 17-22, 2016.

Harshini Ramakrishna, Ting He, Tieshi Li, Martin W. King, Anna Spagnoli. Culturing TgfbR2 expressing progenitor cells on textile scaffolds fabricated from resorbable PLLA

27

for regeneration of tendon-bone junction. 10th World Biomaterials Congress, Montreal, Canada, May 17-22, 2016.

Ting He, Xiaoqi Tang, Martin W. King. Degradation study of polylactic acid textile structure under commercial fabrication conditions. 10th World Biomaterials Congress, Montreal, Canada, May 17-22, 2016.

Martin W. King. The advantages of textile structures for tissue engineering scaffolds. The Textile Summit and Postgraduate Student Conference, Hong Kong Polytechnic University, Hong Kong. June 28-30, 2016.

Jiyang Chen, Andre West, Ke Cheng, Martin W. King. Biodegradable knitted cardiac patch for myocardium regeneration using cardiosphere-derived cells (CDC's). The Textile Summit and Postgraduate Student Conference, Hong Kong Polytechnic University, Hong Kong. June 28-30, 2016.

Hui Cong, Yu Xie, Ozan Akkus, Martin W. King. Potential applications for oriented collagen yarns in biotextile applications. The Textile Summit and Postgraduate Student Conference, Hong Kong Polytechnic University, Hong Kong. June 28-30, 2016.

Ting He, Xiaoqi Tang, Martin W. King. Resorbable muscle-tendon junction scaffold with tunable porosity and mechanical properties. The Textile Summit and Postgraduate Student Conference, Hong Kong Polytechnic University, Hong Kong. June 28-30, 2016.

Radhika Vaid, Chirag Gajjar, Erol Yildirim, Martin W. King, Melissa A. Pasquinelli, "The degradation characteristics of polylactic acid for in vivo applications", IRTG 1524 Annual Meeting Self-Assembled Soft-Matter Nanostructures at Interfaces, Neuruppin, Germany, October 7 - 10, 2016.

Bhavya Singhi, Radhika Vaid, Martin W. King, "Solvent spinning of bacterial polyester". International Conference and Exhibition on Polymer Chemistry, Atlanta, GA, November 14 - 16, 2016.

Radhika Vaid, Chirag Gajjar, Melissa A. Pasquinelli, Martin W. King. Optimization of pH conditions for the degradation of PLA in implant environment using a combination of experiments and simulations. AATCC International Conference, Wilmington, NC. March 28-30, 2017.

Jiyang CHEN, Andre J. WEST, Ke CHENG, Martin W. KING, "Mechanical and Biological Evaluation of Knitted Poly-L-lactic Acid Scaffold for the Delivery of Cariosphere Derived Cells (CDC's)", Society for Biomaterials Annual Meeting, Minneapolis, MN, April 5-8, 2017.

Hui CONG, Yihan HUANG, Gregory L. RUFF, Simon C. ROE, Jacqueline H. COLE, Martin W. KING, "Factors Influencing the Anchoring Performance of Polydioxanone Barbed Surgical Sutures, Society for Biomaterials Annual Meeting, Minneapolis, MN, April 5-8, 2017.

Chirag GAJJAR, Melissa A. PASQUINELLI, Martin W. KING, "Molecular Dynamics Simulations of PLA Using a Reactive Force-Field", Society for Biomaterials Annual Meeting, Minneapolis, MN, April 5-8, 2017.

Chirag GAJJAR, Martin W. KING, "Process-Property Relationships forBioabsorbable Polymers", Society for Biomaterials Annual Meeting, Minneapolis, MN, April 5-8, 2017.

Ting HE, Robert G. DENNIS, Martin W. KING, "Space and Cost Saver Bioreactor for Engineering Muscle/Tendon Tissue", Society for Biomaterials Annual Meeting, Minneapolis, MN, April 5-8, 2017.

Harshini RAMAKRISHNA, Ting HE, Tieshi LI, Martin W. KING, Anna SPAGNOLI, "Culturing TgfBeta-R2 Expressing Progenitor Cells on Textile Scaffolds Fabricated from Resorbable PLA for Regeneration of Tendon-Bone Junction", Society for Biomaterials Annual Meeting, Minneapolis, MN, April 5-8, 2017.

Radhika VAID, Melissa A. PASQUINELLI, Martin W. KING, "Integrating Experiments and Molecular Dynamics Simulations to Understand the Degradation Mechanisms of

28

Bioresorbable Fibers", Society for Biomaterials Annual Meeting, Minneapolis, MN, April 5-8, 2017.

Yu XIE, Umit LEVENT, Ozan AKKUS, Edwin R. CADET, Martin W. KING, "Collagen Yarns for Rotator Cuff Repair Graft", Society for Biomaterials Annual Meeting, Minneapolis, MN, April 5-8, 2017.

R. Kotek, V. Visvanath, “Ultraviolet Degradation Studies of Polypropylene Filaments with Pro-degradant Additives”, 16th World Textile Conference AUTEX 2016, June 8-10, 2016, Ljubljana, Slovenia.

R. Kotek, M. Najafi, "HIB Process for Making High Performance Fibers with Low MW Fiber Forming Polymers", The Textile Summit, College of Textiles, NCSU. Raleigh, NC, March 21, 2017

Li X, Li j, Michielsen S "Influence of Yarn Structure on Bloodstain Pattern Formation on Woven Fabrics", Australian-New Zealand Forensic Science Symposium, Auckland, NZ, Sept 17, 2016.

Michielsen S "Forensic Files: So How Much Blood Was That?" The Fiber Society - 75 Years in the Making, Cornell University, Ithaca, NY October 10-12, 2016

Li X, Li J, Michielsen S "Interaction f Liquids with Textiles: Blood, Sweat and Tears" Textile Summit, NCSU March 2017

Michielsen S "Altering Surface Characteristics of Fibers through a Polymeric Graft-to Approach" given to Shinshu University, University of Fukui, and Kyoto Institute of Technology in July, 2016.

Chang JYM, Michielsen S "What Is Behind the Textile Matters!" Australian-New Zealand Forensic Science Symposium, Auckland, NZ, Sept 17, 2016.

(Invited) MA Pasquinelli, SS Tallury, B Pourdeyhimi, and RJ Spontak, “Molecular Design of Shape Memory Polymer Fibers That Are Thermally Responsive,” International Symposium on Functional Fibrous Materials (ISFFM2016), Wuxi China (14 December 2016).

(Invited) MA Pasquinelli, Y Su, SS Tallury, RE Gorga, and RJ Spontak, “Sustainable Polymer Science: Tuning the Interfacial Characteristics of Bicomponent Polymer Materials via Molecular Simulations,” Polymer Composites and High Performance Materials, Santa Rosa, CA (25 July 2016).

R Vaid, MW King, MA Pasquinelli, “Integrating Experiments and Molecular Dynamics Simulations to Understand the Degradation Mechanisms of Bioresorbable Fibers” at MedTex17 International Annual Conference, Shanghai, China (19 May 2017).

I Khan, E Yildirim, and MA Pasquinelli, “Molecular Dynamics Simulations of Nanoparticle Dispersed PEO Polymer Electrolytes for Lithium-Ion Batteries,” Symposium on Molecular Theory and Modeling: In Honor of the 80th Birthday of Professor Keith E. Gubbins, Raleigh NC (1 May 2017).

R Vaid, MW King, and MA Pasquinelli, “Integrating Experiments and Molecular Dynamics Simulations to Understand the Degradation Mechanisms of Bioresorbable Fibers,” Symposium on Molecular Theory and Modeling: In Honor of the 80th Birthday of Professor Keith E. Gubbins, Raleigh NC (1 May 2017).

M Tuhin, RJ Spontak, and MA Pasquinelli, “DPD simulations to elucidate the role of solvent on the characteristics of ABA triblock copolymer based thermoplastic elastomeric gels (TPEGs),” Symposium on Molecular Theory and Modeling: In Honor of the 80th Birthday of Professor Keith E. Gubbins, Raleigh NC (1 May 2017).

R Vaid, MW King, MA Pasquinelli, “Integrating Experiments and Molecular Dynamics Simulations to Understand the Degradation Mechanisms of Bioresorbable Fibers” at the Society for Biomaterials 2017 Annual Conference, Minneapolis Conference (5 April 2017).

R Vaid, C Gajjar, MA Pasquinelli, MW King, “Optimization of pH conditions for the degradation of PLA in an implant environment using a combination of experiments and

29

simulations,” at the American Association of Textile Chemists and Colorists 2017 International Conference, Wilmington, NC (28-29 March 2017).

MA Pasquinelli, “Optimizing the Performance of Fibrous Polymer Materials via Molecular Simulations,” Textile Summit, Raleigh, NC (22 March 2017).

R Vaid, MW King, MA Pasquinelli, “Determine Degradation Mechanism of Bioresorbable Polymers for Sutures by Integrating Experiments and MD Simulations” at International Spring School on Soft Matter, Boston, MA (10 March 2017).

R Vaid, MW King, and MA Pasquinelli, “The degradation characteristics of polylactic acid for in vivo applications,” Annual Meeting of the International Research and Training Group on Self-Assembled Soft Matter Nano-Structures at Interfaces, Neuruppen, Germany (8 October 2016).

MA Pasquinelli, YT Su, SS Tallury, RE Gorga, and RJ Spontak, “Tuning the Interfacial Characteristics of Fibrous Materials via Nanoscale Simulations,” Nanofibers and Related Technologies Conference, Raleigh, NC (14 September 2016).

Z Pang, E Yildirim, Qufu Wei, and MA Pasquinelli, “PA6/PANI Composite Nanofibers for Ammonia Sensors: A Combined Experimental and Simulation Approach,” Nanofibers and Related Technologies Conference, Raleigh, NC (14 September 2016).

N Zhang, J Shen, CP Zane, MA Pasquinelli, D Hinks, A Tonelli, “Superior performance and delivery of flame retardants with their crystalline inclusion compounds,” Fire and Polymers Session, Division of Polymeric Materials Science and Engineering, 252nd American Chemical Society National Meeting, Philadelphia, PA (24 August 2016).

E Yildirim, B Abolins, A Detwiler, C Cleven, H Freeman, A El-Shafei, M Pasquinelli, “Role of chemical structure on the alkaline hydrolysis of industrially-relevant copolyester model compounds,” Polymer Science at the Interface of Industry, Government & Academics, Division of Polymer Chemistry, 252nd American Chemical Society National Meeting, Philadelphia, PA (25 August 2016).

CP Zane, MA Pasquinelli, N Vinueza, Y Chen, D Hinks, N Zhang, E Yildirim, A Tonelli, “Flame retardants: New approaches to reduce exposure,” Poster Session of the Division of Environmental Chemistry, 252nd American Chemical Society National Meeting, Philadelphia, PA (24 August 2016).

CR Gajjar, MA Pasquinelli, MW King, “Experimental and Computational Study of Process-Property Relationship for Bioabsorbable Polymers”, Poster Presentation at 2016 World Biomaterials Congress, Montreal, Canada (19 May 2016).

M Tuhin, RJ Spontak, and MA Pasquinelli, "13-154 – Cold-Draw Shape-memory Bi/Tricomponent Fibers: Investigating the Polymer/Polymer Interface and Adding Sensory Functionality," IDEA16 International Engineered Fabrics Conference and Exhibition, (4 May 2016).

R Vaid, MW King, MA Pasquinelli, “Role of Computational Modeling in determining degradation of resorbable polymer (PLLA).”Techtextil Atlanta (4 May 2016).

R Shamey, S Kulappurath, Y Lin, D. Hines, Color Quality Control Using Digital Imaging Techniques

O. Yusek, E. Shim & B. Pourdeyhimi, Filtration properties and functionalization of PA6 Nanofiber/Woven Fabric Composite, NART (Nanofibers, Applications, and Related Technologies), September 13-15, 2016, Raleigh, NC

H. Stoughton, E. Shim, & B. Pourdeyhimi, Ion Exchange Microfiber Nonwovens, NART (Nanofibers, Applicastions, and Related Technologies), September 13-15, 2016, Raleigh, NC

B. Pourdeyhimi, E. Shim, B. Maze, Forming Hydroentangled nonwovens by using jet stripes with wide spacing, Man-made Fibers Congress, Sept 20-22, Durnbrin, Austria, 2016

30

E. Shim, H. Stoughton, B. Pourdeyhimi, High Surface Area Ion Exchange Nonwovens PaperCon/NETInc Innovative Nonwovens Conference, May 15-18, 2016, Cincinnati, Ohio

Lucas Szalwinski, Nelson R Vinueza, John Nash, Hilkka Kenttämaa. “Gas-Phase Reactivity of Isomeric σ,σ- Biradicals: A Comparison of 1,4-, 1,3-, and 3,4-Didehydroisoquinolinium Cations” 64th Annual Meeting of the American Society for Mass Spectrometry on Mass Spectrometry and Allied Topics, San Antonio, TX, June 2016

Yufei Chen, Nanshan Zhang, Milad Nazari, Mark Bokhart, Maans Ekeloef, David C Muddiman, Nelson R Vinueza. “Rapid Detection and Imaging of Fire-RetardantCyclodextrin-Inclusion Complexes on fibers and films by using IR-MALDESI Mass Spectrometry”. 64th Annual Meeting of the American Society for Mass Spectrometry on Mass Spectrometry and Allied Topics, San Antonio, TX, June 2016

Xiangwu Zhang, “Centrifugally-Spun Nanofibers for Advanced Energy Storage”, 2017 Materials Research Society Spring Meeting & Exhibit, Phoenix, Arizona, April 17-21, 2017. (Invited Talk)

Xiangwu Zhang, “Textile Research and Development: Where Tradition Meets Innovation”, International Symposium on Functional Fibrous Materials (ISFFM 2016), Wuxi, China, December 2016. (Invited Talk)

Xiangwu Zhang, “Centrifugally-Spun Nanofibers for Advanced Energy Storage”, Textile Summit & Postgraduate Student Conference, Hong Kong, China, June 2016. (Invited Talk)

Xiangwu Zhang, “Advanced Composite Nanofibers for Batteries and Supercapacitors by Centrifugal Spinning”, Kunming University of Science and Technology, Kunming, China, June 2016. (Invited Talk)

Xiangwu Zhang, “Centrifugally-Spun Nanofiber Materials for Lithium-Ion Batteries, Lithium-Sulfur Batteries, and Supercapacitors”, Donghua University, Shanghai, China, June 2016. (Invited Talk)

Xiangwu Zhang, “Centrifugally-Spun Nanofibers for Advanced Energy Storage”, Techtextil North America 2016 Symposium, Atlanta, Georgia, May 2016. (Invited Talk)

Regional/National Presentations and/or Conferences: 58 Seminar UNC School of Public Health / NORA Seminar: "Protective Clothing and

Equipment (PPE) and exposure science in occupational settings - balancing needs for protection and physiological strain" February 8th, 2017

11th International Thermal Manikin and Modeling Meeting, Soochow, China, October 12-14, 2016. “Advances in Physiological Sweating Thermal manikins, Challenges and Opportunities.”

Yaewon Park*, Preeti Rawat, Ericka Ford, Controlling Morphology of Calcium Carbonate Mineralized Nanofibers, Poster Presentation at Appalachian Energy Summit, Appalachian State University, Boone, NC, USA, 2016.

Chunhong Lu, Charles Blackwell, LaTasha Nicolson, Ericka Ford. “Bio-based Fibers Gel Spun from Lignin/Poly(vinyl Alcohol)”, Appalachian Energy Summit. Boone, NC. July 19, 2016

Ericka Ford, Chunhong Lu, Charles Blackwell, "Gel Spinning of Lignin Reinforced Fibers" Oral Presentation. The Fiber Society, October 10, 2016

(Invited) Wei Gao*, Qin Pan, Nanfei He, Yixin Liu, Ningjun Tong, “Graphene Oxide in Wearable Electronics”, seminar presentation in Wake Forest Univesity, Department of Chemistry, Greensboro, NC, April, 2017.

Southern Textile Research Conference, Myrtle Beach, "VIABILITY OF USING LEAN SIX SIGMA IN SUSTAINABLE DYEING MANUFACTURING "

31

(Invited Keynote) Joines, J.A.: Simulation and Innovation in Six Sigma, Lean Six Sigma Forum, October 6, 2016

Cemile Asku, Philip Bradford, Jesse Jur; "Patterning of Aligned Al2O3-Carbon Nanotube Macro-Structures Using Laser Etching" AVS MRS ASM Southeast Regional Meeting

Alexa Kearns, Richard Venditti, Jesse Jur; "Opportunities for Cotton Materials in 3D Printing" 2016 AVS MRS ASM Southeast Regional Meeting

Hasan Shahariar, Jesse S. Jur "Conductive inks printing patterning on nonwoven fabrics" - Nanofibers, Applications and Related Technologies 2016

Alexa Kearns, Nasim Farahbakhsh, Richard Venditti, Jesse Jur; "Cotton Fibers in 3D Printing" 2016 Annual International Solid Freeform Fabrication Symposium

Raj Bhakta, Jesse S. Jur "Direct-Write Printed Electronics On Textiles" 2017 Printed Electronics Europe IDTechEx

Hasan Shahariar, Henry Soewardiman, Jesse S. Jur "Fabrication and packaging of flexible and breathable patch antennas on textiles" 2017 IEEE Southeastcon

Jesse S. Jur "Textile Electronic System Design - Human-based Sensing and Energy Harvesting Strategies" Seminar at Univ. of Kentucky Center for Applied Energy Research

Jesse S. Jur "Atomic Layer Deposition Methods for Future Textile Electronic Systems", Seminar at Univ. of Kentucky Dept. of Chemistry

Jesse S. Jur "Printing Strategies for Textile Electronics" 2016 Fall Meeting for the I/UCRC on Dielectric and Piezoelectrics

Jesse S. Jur "Textile Electronics" 2016 Outdoor Retailer

Jesse S. Jur "Toward Wearable Textile Electronics " 2016 SGIA Garment Decorators Conference

Jesse S. Jur "Strategic Designs for Printed Electronics " 2016 SGIA

Jesse S. Jur "Collaboration – Key to the Future of Smart Textiles" 2016 Wearable Tech USA

Murat Yokus, Rachel Foote, Jesse S. Jur "Heat-lamination of printed electronics for customizable electronic textiles" 2016 MRS Spring Meeting.

Amanda Myers, Jesse S. Jur "Human and Environment Influences on Thermoelectric Energy Harvesting toward Self-Powered Textile-Integrated Wearable Devices" 2016 MRS Spring Meeting

Radhika Vaid, Martin W. King, Melissa A. Pasquinelli. Role of computational modeling in predicting degradation of a resorbable polymer. TechTextil NA, Georgia World Congress Center, Atlanta, GA. May 3-5, 2016.

Xiaoqi Tang, Ting He, Hsiao-Ying Huang, Martin W. King. Mechanical study of 3D warp knitted spacer fabric with uniaxial and biaxial measurement. TechTextil NA, Georgia World Congress Center, Atlanta, GA. May 3-5, 2016.

Haripriya Ramesh, Krishna Radhakrishnan, Senthil Kumar, Ashok M. Raichur, Martin W. King. Triggered transient amorphous calcium carbonate for effluent removal from waste water. TechTextil NA, Georgia World Congress Center, Atlanta, GA. May 3-5, 2016.

Jiantao Huang, Martin W. King. An investigation on the use of chitosan for donor site wound dressings. Twelfth National Graduate Research Polymer Conference, University of Akron, Akron, OH, June 19-22, 2016.

Bhavya Singhi, Radhika Vaid, Martin W. King. Development of solvent spinning process for bacterial polyester. Twelfth National Graduate Research Polymer Conference, University of Akron, Akron, OH, June 19-22, 2016.

Martin W. King. Engineering textiles for medical applications. Department of Materials Engineering, National University of Science and Technology, Islamabad, Pakistan, July 18th 2016.

32

Martin W. King. The challenges of technical and medical textile production. Department of Textile Engineering, National Textile University, Faisalabad, Pakistan. July 19th 2016.

Martin W. King. Investing in the future: the challenge of medical and technical textile production. Shahbaz Garments (PVT) Limited, Faisalabad, Pakistan. July 20th 2016.

Martin W. King. The world of technical textiles: design, production, testing and quality assurance. Department of Chemical Engineering, University of Engineering and Technology Lahore, Faisalabad Campus, Faisalabad, Pakistan. July 20th 2016.

Martin W. King. The world of medical textiles. Department of Textile Engineering, University of the Punjab, Lahore, Pakistan. July 21st 2016.

R. Kotek, M. Najafi, "Overview of HIB process for making high performance fibers", Fiber Society Conference, Cornell University, Ithaca, October 10-12, 2016.

(Invited) R Mathers, MA Pasquinelli, “Guiding the synthesis of polyester electrolytes with hydrophobicity calculations,” Chemical Informatics Division, 253rd American Chemical Society National Meeting, San Francisco, CA (2 April 2017).

(Award) Y Caydamli, E Yildirim, J Shen, X Fang, MA Pasquinelli, RJ Spontak, AE Tonelli, “Nanoscale considerations responsible for diverse macroscopic phase behavior in substituted isobutyl-POSS/poly(ethylene oxide) blends,” Polymer Division: Excellence in Graduate Polymer Research, 253rd American Chemical Society National Meeting, San Francisco, CA (4 April 2017)

(Invited) MA Pasquinelli, “Optimizing the Performance of Fibrous Polymer Materials via Molecular Simulations,” Physical Chemistry Division, Department of Chemistry, University of Florida, Gainesville, FL (24 Jan 2017).

(Invited) MA Pasquinelli, “Sustainable Polymer Science: Tuning the Characteristics of Polymer Systems via Molecular Simulations,” Department of Chemistry, Carnegie Mellon University, Pittsburgh, PA (20 October 2016).

(Invited) MA Pasquinelli, SS Tallury, M Tuhin, S Dangi, R Spontak, B Pourdeyhimi, “Innovations in Shape Memory Polymer Fibers,” Office of Naval Research Workshop, Raleigh NC (11 April 2016).

C Cipriani, E Yildirim,CP Zane, MA Pasquinelli, N Vinueza, “Studies on the Mechanism of Disperse Dye Photodegadation,” National Conferences on Undergraduate Research, Memphis TN (6-8 April 2017).

M Tuhin, RJ Spontak, and MA Pasquinelli, "13-154 – Cold-Draw Shape-memory Bi/Tricomponent Fibers: Investigating the Polymer/Polymer Interface and Adding Sensory Functionality," NWI Industrial Advisory Board Meeting, (November 2016).

CE Cipriani, E Yildirim, MA Pasquinelli, NR Vinueza. “Molecular Modeling Studies to Elucidate the Effect of Isomerization on Disperse Dye Photodegradation,” State of North Carolina Undergraduate Research & Creativity Symposium, Durham, NC, (5 November 2016).

R Vaid, MA Pasquinelli, and MW King, “The Degradation Mechanism of Bioresorbable Fibers: What Can be Learned from Experiments and Molecular Simulations?” 2016 North Carolina Tissue Engineering and Regenerative Medicine Society, Chapel Hill, NC (27 October 2016).

J Duetsch, E Yildirim, and MA Pasquinelli, “Computational Design of Polymer Nanocomposites for UAV Materials,” Council on Undergraduate Research REU Symposium, Arlington VA (October 24 2016).

CP Zane, MA Pasquinelli, N Vinueza, Y Chen, D Hinks, N Zhang, E Yildirim, A Tonelli, “Flame retardants: New approaches to reduce exposure,” Poster Session Mid-Atlantic Regional Meeting for the American Chemical Society, Yonkers, NY (10 June 2016).

E. Shim, A. Kilic and B. Pourdeyhimi, Effects of Nucleating Agents on morphology, Filtration and Charging Properties of Polypropylene Meltblown Media, 2017 American Filtration Society Spring Conference, Advanced Filtration Technology, April 10-12, 2017, Louisville, Kentucky

33

Superior performance and delivery of flame retardant with their crystalline inclusion compound, N. Zhang, C. Zane, D. Hinks, M. Pasqinelli, A. E. Tonelli, ACS National Meeting in Philadelphia, 8/23/2016

Can we determine the complete architectures of sequence controlled polymers? R, Gurarslan, A. E. Tonelli, ACS National Meeting in Philadelphia, Sequence-Controlled Polymers Symposium, 8/24/2017.

Design of Safer Flame retardant Textiles through Inclusion compound formation with cyclodextrins, N. Zhang, C. Zane, E. Yildirim, D. Hinks, M. Pasquinelli, A. E. Tonelli, ACS National meeting in Philadelphia, Fire Symposium, 8/25/2017

Can the overall molecular architectures of polymers with precisely designed microstructures be characterized?, R. Gurarslan, A. E. Tonelli, ACS national meeting in Philadelphia, Polymers with Precise Structures Symposium, 8/25,2017.

Do we need to Know and Can We determine the Complete Macrostructures of Synthetic Polymers? R. Gurarslan, A. T. Tonelli, EXXON-Mobil, Lebanon, NJ, 9/9/2016

Restructuring Polymers with Cyclodextrins and Urea via Nano-Confinement and Subsequent Release, A. E. Tonelli, EXXON-Mobil, Lebanon, NJ, 9/9/2017

Restructuring Polymers with Cyclodextrins and Urea via Nano-Confinement and Subsequent Release, A. E. Tonelli, ACS National Meeting, Symp. On Molecular Engineering with CDS, San Francisco, 4/4/2017.

Can the Overall Molecular Structures of Man-Made Syntheric Polymers be Determined?, R. Gurarslan, A. E. Tonelli, ACS National Meeting , San Francisco, 4/6/2017.

Cody Zane, Nanshan Zhang, Erol Yildirm, Yufei Chen, David Hinks, Alan E. Tonelli, Nelson R. Vinueza, Melissa A. Pasquinelli. “Flame Retardants: New Approaches To Reduce Exposure” 44th Middle Atlantic Regional Meeting NYACS , New York, NY, June 2016

Emily Lichtenberger, Nelson R. Vinueza.” Analysis of Inks Via a Microfluidics Extraction Device With a Quadrupole Time-of-Flight Mass Spectrometer (QTOF/MS)”. 68th Annual Scientific Meeting of the American Academy of Forensic Science, Las Vegas, NV, February 2016

Kelsey Boes, Yufei F Chen, Hoyong Kim, Park Sunkyu, Nelson R Vinueza.” Quadrupole–Time-of-Flight Tandem Mass Spectrometry Identifies and Quantifies Eugenol in Extraction from Bio-oils Into Diesel”. 64th Annual Meeting of the American Society for Mass Spectrometry on Mass Spectrometry and Allied Topics, San Antonio, TX, June 2016

Emily Lichtenberger, Nelson Vinueza. “Comparison of Methods of Analysis for the Extractions and Identification of Drugs Using Microfluidics Mass Spectrometry.” Oral Presentation at 69th American Academy of Forensic Science Annual Scientific Meeting-New Orleans, LA, February 17, 2017

Local (Triangle) Presentations: 80 Boyd, S., Wang R., Yildiz, O., Bradford, P., Agustyn, V. Horizontally-aligned Carbon

Nanotube and Amorphous MoO3 Electrodes for High-performance Electrochemical Capacitors, (2016) Proceedings of MRS/ASM/AVS-NC Joint Meeting, Raleigh NC, USA.

Aksu, C., Bradford, P., Jur, J. Patterning of Aligned Al2O3 Carbon Nanotube Macro-structures Using Laser Etching, (2016) Proceedings of MRS/ASM/AVS-NC Joint Meeting, Raleigh NC, USA.

Yildiz, O., Bradford, P., Carbon Nanotube – Polymer Nanofiber Hybrids for High Performance Electrically Conductive Textiles, (2016) Proceedings of MRS/ASM/AVS-NC Joint Meeting, Raleigh NC, USA

Bradford, P. Aligned Carbon Nanotube Sheet Structures and Applications, Seminar, University of Kentucky

34

Bradford, P. Research Funding in the Sciences and Engineering (2017) NC State Building Future Faculty Program, Raleigh NC USA

AATCC Moisture Management Symposium: “Breathability”, February 9th, 2017, Cary, NC

Yaewon Park*, Shuang Liu, Terrence Gardner, Ericka Ford, Biogenic Nanofiber Mineralization by Manganese Oxidizing Fungi, Poster presentation at The Research Day, College of Textiles, North Carolina State University, Raleigh, NC, 2017.

Yaewon Park*, Ericka Ford, Deactivation of Chemical Threat Agents by Calcium Carbonate Composite Membranes, Oral Presentation at NWI Fall IAB Meeting, North Carolina State University, Raleigh, NC, 2016.

Ericka Ford*, Yaewon Park, Preeti Rawat, Anthony Blair, Seed Strategies on the Functionality of Mineralized Nanofibers for Environmental Remediation, Oral Presentation at Nanofibers, Applications and Related Technologies-NART Conference, Mariott City Center, Raleigh, NC, USA, 2016.

Yaewon Park*, Preeti Rawat, Ericka Ford, Effect of Seeding on the Morphology of Calcium Carbonate Mineralized Nanofibers, Poster Presentation at Nanofibers, Applications and Related Technologies-NART Conference, Mariott City Center, Raleigh, NC, USA, 2016.

Chunhong Lu, Charles Blackwell, Ericka Ford. “Techniques for Strengthening Lignin/Polymer Fibers", Industrial Advisory Board, Nonwovens Institute. Raleigh NC. November 2, 2016

Chunhong Lu, Charles Blackwell, Qingyuan Ren, Ericka Ford. "Effect of Coagulation Bath on the Structure and Mechanical Properties of Gel Spun Lignin/Poly(vinyl Alcohol) Fibers". Textile Summit, Raleigh, NC. March 20, 2017

Chunhong Lu, Charles Blackwell, Qingyuan Ren, Ericka Ford. "Structure-Property Relationships of Gel-Spun Poly(vinyl Alcohol)/Lignin Composites". NART (Nanofibers, Applications and Related Technologies), Raleigh, NC. September 14, 2017

Chunhong Lu, Charles Blackwell, Ericka Ford. “Techniques for Strengthening Lignin/Polymer Fibers", Industrial Advisory Board, Nonwovens Institute. Raleigh NC. May 17-18, 2016

Preeti Rawat, Yaewon Park, Ericka Ford (Advisor) "Effect of acetate derivatives as a pendent groups on the nanofiber morphology of PVA blends and copolymers" Poster Presentation, IAB, Raleigh, NC May 17-18,2016.

Preeti Rawat, Yaewon Park, Ericka Ford (Advisor) "Functionality of Poly(vinyl alcohol) Copolymers on the Morphology and Surface Chemistry of Electrospun Nanofibers" Poster Presentation, NART, Raleigh, NC Sep 13, 2016.

Preeti Rawat, Yaewon Park, Ericka Ford (Advisor) "Functionality of Poly(vinyl alcohol) Copolymers on the Morphology and Surface Chemistry of Electrospun Nanofibers" Poster Presentation, ACS on Campus, Raleigh, NC Sep 16, 2016.

Preeti Rawat, Yaewon Park, Ericka Ford (Advisor) "Effect of Functionality of Poly(vinyl alcohol) Copolymers on the Morphology and Surface Chemistry of Electrospun Nanofibers" Poster Presentation, IAB, Raleigh, NC Nov 1-2,2016.

Charles Blackwell, Chunhong Lu, Greg Redden, Ericka Ford. "Gel-Spun Composite Fiber Processing." Poster Presentation. IAB, Raleigh, NC, May 17-18, 2016

Charles Blackwell, Chunhong Lu, Greg Redden, Ericka Ford. "Gel-Spun Polyacrylonitrile/Lignin Composite Fibers." Poster Presentation. NART, Raleigh, NC, September 13-15, 2016

Charles Blackwell, Chunhong Lu, Greg Redden, Ericka Ford. "Gel-Spun Composite Fiber Processing." Poster Presentation. ACS On Campus, Durham, NC, September 16, 2016

Charles Blackwell, Chunhong Lu, Greg Redden, Ericka Ford. "Gel-Spun Composite Fiber Processing." Poster Presentation. IAB, Raleigh, NC, November 1-2, 2016

35

Ericka Ford, Chunhong Lu, Charles Blackwell, Yaewon Park, Preeti Rawat, "Structure and Performance of Composite Gel-spun and Electrospun fibers", Textile Research Summit 2017, March 22, 2017

Garry Morgan, Ericka Ford, "Action Planning: Post BFF Next Steps", Oral Presentation, North Carolina State University Building Future Faculty, Raleigh NC, March 17, 2017

Nortee Louder, Chunhong Lu, Ericka Ford, "Gel-Spun PVA/Lignin Fibers: A Comparison of Diameter Calculation from Linear Density Values and Image Analysis", Poster Presentation, NC State University Undergraduate Research Symposium, Raleigh, NC, April 12, 2017.

Erin Roberts, Shuang Liu, Terrence Gardner, Ericka Ford, "Influence of E. coli Growth Phase on its Adhesion onto Nonwoven Textiles", Poster Presentation, NC State University Undergraduate Research Symposium, Raleigh, NC, April 12, 2017.

Melisa Pasli, Preeti Rawat, Ericka Ford, "Morphology of Electrospun Polyvinyl Alcohol/Polyvinyl Acetate Blends", Poster Presentation, NC State University Undergraduate Research Symposium, Raleigh, NC, April 12, 2017.

Wei Gao*, “Graphene-Fiber-Based Supercapacitors Favor N-Methyl-2-Pyrrolidone as the Spinning Solvent”, Textile Summit, Raleigh, NC (March 21st, 2017)

Wei Gao*, “In-plane Supercapacitors on Flexible Fabrics”, IAB meeting of Center for Dielectrics and Piezoelectrics (CDP), NCSU, Raleigh, NC (18 Oct, 2016)

(Invited) Wei Gao*, “Wearable Supercapacitors on Textiles”, College of Engineering, the Assist Center, NCSU, Raleigh, NC (11 July, 2016)

(Invited) Wei Gao*, “Graphene Oxide in Fuel Cells and Supercapacitors”, College of Engineering, the Department of Chemical Engineering, NCSU, Raleigh, NC (28 March, 2016)

Electroactive Polymer based Textiles, T. K. Ghosh, Presented at the KOFOTI visit to NC State University, March 20-24, 2017

Russell E. Gorga and Jess Jur, Teaching Pedogogy in Senior Design, Teaching and Learning Symposium, NCSU, April 3, 2017

Plasma Textiles for Nanofiltration, Textile Summet, March 21, 2017.

Hanes Partnership, KOFTI and Youngone Presentation at NCSU Cot 3/22/2017

Jesse Jur "Smart Fabrics" Science Saturday

Jesse S. Jur "Smart Clothing" 2016 TedX Durham

Raj Bhakta, Jesse S. Jur "Direct-write printed interconnects and sensors for smart textiles" 2017 Textile Summit

Amanda Myers, Jesse S. Jur "Strategies for Human-based Energy Harvesting in Textiles" 2017 Textile Summit

Advait Bhagwat, Martin W. King, "Chitosan based scaffolds for bone tissue engineering - A review", North Carolina Tissue Engineering & Regenerative Medicine Society Annual Meeting, Chapel Hill, NC, October 27th 2016.

Haripriya Ramesh, Martin W. King, "3D printed scaffolds for vascular tissue engineering", North Carolina Tissue Engineering & Regenerative Medicine Society Annual Meeting, Chapel Hill, NC, October 27th 2016.

Harshini Ramakrishna, Ting He, Tieshi Li, Martin W. King, Anna Spagnoli, "Multiphase biodegradable scaffolds for tissue engineering a tendon-bone junction", North Carolina Tissue Engineering & Regenerative Medicine Society Annual Meeting, Chapel Hill, NC, October 27th 2016.

Jiyang Chen, Andre J. West, Ke Cheng, Martin W. King, "A biodegradable knitted cardiac patch for myocardium regeneration using cardiosphere-derived cells (CDCs)", North Carolina Tissue Engineering & Regenerative Medicine Society Annual Meeting, Chapel Hill, NC, October 27th 2016.

Radhika Vaid, Melissa A. Pasquinelli, Martin W. King, "The degradation mechanism of bioresorbable fibers. What can be learned from experiments and molecular

36

simulations?", North Carolina Tissue Engineering & Regenerative Medicine Society Annual Meeting, Chapel Hill, NC, October 27th 2016.

Advait Bhagwat, Chitosan based scaffolds for bone tissue engineering. NC State Graduate Student Research Poster Symposium, March 22, 2017.

Pinaki Nakod, Development of a Textile Wound Dressing for vacuum assisted wound therapy. NC State Graduate Student Research Poster Symposium, March 22, 2017.

Runqian Zhang, Chimney Technique for Endovascular Aneurysm Repair: Accelerated Fatigue Tests Using 3D Printed Phantom of Particular Patient. NC State Graduate Student Research Poster Symposium, March 22, 2017.

Yihan Hunag, The Anchoring Performance of Polyvinylidene Fluoride Barbed Sutures in Porcine Patellar Tendon Tissue. NC State Graduate Student Research Poster Symposium, March 22, 2017.

W.E. Krause, "Influence of Intended Major and Preparedness on Student Success in a 200 Level Polymer Science & Engineeering Course," NCSU Teaching & Learning Symposium, 4/11/2016.

W.E. Krause, panelist on Experiences of Women in Science & Engineering, WISE Spend-a-Day, Raleigh, NC, 2/13/2017 (invited).

W.E. Krause, "Accuracy of Electrospun Fiber Diameters: The Importance of Sampling and Person-to-Person Variation," Textile Summit 2017, 3/22/2017.

Z. Ashrafi, L.A. Lucia, & W.E. Krause, Superhydrophilic-Superoleophobic Membranes for Oil-Water Separation, presented at the Nonwoven Institute’s Spring Industrial Advisory Board meeting, Raleigh, NC 5/17 – 5/19/2016 (poster).

Z. Ashrafi, L.A. Lucia, & W.E. Krause, Superhydrophilic-Superoleophobic Membranes for Oil-Water Separation, presented at the Nonwoven Institute’s Fall Industrial Advisory Board meeting, Raleigh, NC 11/3 – 11/5/2016 (poster).

S. Michielsen "CSI: You have blood on your clothes. Guilty or Innocent?", Shaw University, Raleigh, NC, November 9, 2016.

S. Michielsen "Alternative Method for Determining the Original Drop Volume of Bloodstains on Kint Fabrics" NC Association of Identification International, May, 2016, Raleigh, NC

(Invited) MA Pasquinelli, “Computer-Aided Design of Polymeric Materials From the Nanoscale,” Wake Tech Community College, Raleigh, NC (11 April 2017).

C Cipriani, E Yildirim, CP Zane, MA Pasquinelli, N Vinueza, “Studies on the Mechanism of Disperse Dye Photodegadation,” NC State Spring Undergraduate Research Symposium (12 April 2017).

C Cipriani, E Yildirim, CP Zane, MA Pasquinelli, N Vinueza, “Studies on the Mechanism of Disperse Dye Photodegadation,” COT Research Day (20 March 2017).

I Khan, E Yildirim, MA Pasquinelli, “Study on molecular dynamics simulations of nanoparticle dispersed PEO polymer electrolytes for Li-ion batteries.,” COT Research Day (20 March 2017).

R Vaid, MA Pasquinelli, and MW King, “The degradation characteristics of polylactic acid for in-vivo applications,” COT Research Day (20 March 2017).

M Tuhin, RJ Spontak, and MA Pasquinelli, “13-154 – Cold-Draw Shape-memory Bi/Tricomponent Fibers: Investigating the Polymer/Polymer Interface and Adding Sensory Functionality,” 2017 Schoenborn Graduate Research Symposium, NC State Chemical and Biomolecular Engineering, (23 January 2017).

Y Caydamli, E Yildirim, J Shen, X Fang, MA Pasquinelli, RJ Spontak, and AE Tonelli, “Nanoscale considerations responsible for diverse macroscopic behavior in substituted isobutyl-POSS/PEO blends,” Materials Research Society Local Meeting, Raleigh NC (4 November 2016).

37

S Ndukwe, E Yildirim, and MA Pasquinelli, “Molecular Dynamics Simulations to Determine the Stability of Polymers When Exposed to Alkaline Environments,” NC State Undergraduate Research Symposium (2 August 2016).

J Duetsch, E Yildirim, and MA Pasquinelli, “Computational Design of Polymer Nanocomposites for UAV Materials,” NC State Undergraduate Research Symposium (2 August 2016).

E Yildirim, C Cleven, BP Abolins, AT Detwiler, H Freeman, MA Pasquinelli, A El-Shafei ,”Role of glycol and end group structure on the alkaline hydrolysis of copolyesters”, 8th Annual Triangle Soft Matter Workshop (9 May 2016)

M Tuhin, RJ Spontak, and MA Pasquinelli, "13-154 – Cold-Draw Shape-memory Bi/Tricomponent Fibers: Investigating the Polymer/Polymer Interface and Adding Sensory Functionality," NWI Industrial Advisory Board Meeting, (May 2016).

R Shamey, Camouflage Imaging and Measurement, KOFOTI Group Visit

R. Shamey, A colorful Journey in Milan, Can Cameras be used for colorimetery

E. Shim, Nonwoven technology for filter media: high surface area fibers via bicomponent technology, Textile Summit, March 21-22, 2017, Raleigh, North Carolina

Can the Overall Molecular Structures of Man-Made Syntheric Polymers be Determined?, R. Gurarslan, A. E. Tonelli, Grad Seminar COT, 9/16/2016.

Attempting the Preparation of a PMMA-Urea Complex, A. Jordan, S. Li, A. E. Tonelli, NC-ACS Section Meeting, RTP, 9/16/2016

Influence of Urea on the Glass Transition Temperature of PMMA, S. Li, A. E. Tonelli, NC-ACS Sectional meeting in RTO, 9/16/2016.

Comparison of the Behaviors of PEG-POSS Stars in PEO:Honey-Comb Morphologies, Y. Caydamli, R. J. Spontak,A. E, Tonelli, NC-ACS Section meeting, RTP, 9/16/2016.

Nanoscale Considerations for Diverse Macroscopic Phase Behaviors in Substitued Isobutyl- POSS/PEO Blends, Y. Caydamli, E. Yildirim, J. Shen, X. Fang, M. Pasquinelli, R. J. Spontak, A. E. Tonelli, MRS NC Symposium NCSU, 11/4/2016

Glass Transition Temperatures and Dynamic Fragilities of Three tactic PMMAs and their relationship with Their single chain Conformation characteristics, J. Shen A. E. Tonelli, NCSU Grad. Student Symposium, 3/22/2017

Influence of Urea on the Glass Transion Temperature of PMMA, s. Li, A. E. Tonelli, Research Day at COT, 3/20/2017.

Can the Overall Molecular Structures of Man-Made Syntheric Polymers be Determined?, R. Gurarslan, A. E. Tonelli, Textile Summit at COT, 3/22/2017.

Xiangwu Zhang, “Application of Textile Materials in Innovative Energy Storage”, North Carolina Central University, Durham, North Carolina, October 2016.(Invited Talk)

Xiangwu Zhang, “Textile Research and Development: Where Tradition Meets Innovation”, Engineering Research Committee Meeting, Raleigh, North Carolina, October 2016. (Invited Talk)

Pei Zhu, Xiangwu Zhang, “Porous Polyacrylonitrile/Graphene Oxide Nanofiber Membrane Used as a Novel Separator for Achieving High Performance Lithium-Sulfur Batteries”, Nanofibers, Applications and Related Technologies NART 2016, Raleigh, North Carolina, September 2016.